OCFJ Hanging after 5-7 days

I am running OC4J 1.0.2.2 on a windows 2000 server.
I am using it as my JSP engine as well. For some reason the application hangs after 5-7 days of being used. In order to get up again I have to restart it.
I am running it as a service and using ConnectionPooling.
Any ideas as to why this may be happening and how to fix it?
Thanks

Hi Lemonte,
My platform is SUN Solaris 7, so what I am about to say may not
be relevant for your Windows platform, but I think it is and that's
why I'll say it.
I think in the release notes it recommends using the JDK that comes
with 9iAS, which (IIRC) is 1.2.2
Does your application involve EJB's? There is an issue with OC4J
keeping bean instances in memory permanently, which can eventually
cause a memory leak.
Unless you can give me more details, there's nothing else I can
suggest right now.
Hope this helps,
Avi.

Similar Messages

Scheduled job keeps hanging after sveral days

MII experts,
We are using MII 12.0.8. I have several scheduled jobs. Those that run once every day never have any problem. However, I have one that runs every 10 minutes keeps hanging after running for 3-4 days. I have to stop and start to kick it off again if that happens. When it hangs, it appears it is still in running state but it never finish.
Have anyone seen this problem before?
Thanks.

We are running MII Version 12.1.5 Build(91) and have noticed jobs in the schedule that are running but are obviously not doing anything. These jobs are user to trnsfer files around our site via ftp.
MII gives no error or indication that the job has failed so we know nothing about these problems untill an end user complains about their file transfers not working. As we are a 24 by 7 site this involves calls to aur support people at all hours.
We have asked SAP for help but they require a Step by Step method to duplicate the error. As this is a very intermitant problem that we have not been able to reproduce on demand this request has been ignored by SAP.
We have many schedule jobs that run once per minute. Slowing them down more would have a bad impact on the usefullnes of the transfers.
If anyone gets an answer to this issue we would love to hear it.

Satellite U400-22n and Win7 - screen hangs after 5 min

Hi, This is my first post
Ive purchased a new U400 with Vista preinstalled, last week ; 2 days ago Ive upgraded to windows 7 32bit professional when I stared Installing it windows prompted me that it requires a full installation , so I done a normal full install, windows 7 installed normally .
Now my screen hangs after 5 min and windows gos black and reboots after 3-5 min, Ive downloaded all the drivers from the Toshiba site Ive used the auto detect, and installed the drivers one by one and tested if the reboot stops , Ive reinstalled windows now 4-5 time returned my copy to the shop and got a new copy of the windows DVD, its the same,
Please has some one any advice for me. As the shop Ive perched this from will not upgrade to windows 7 for me.

hi Mather,
any bluescreens visible?
win7 32bit i guess...
you have to install all the drivers for win7 provided by toshiba in the right order!
first chipset and patchfiles if available...
i think a clean install will do the job!
make sure that the hdd is error free!
you can upgrade from vista 32bit to win7 32bit
but no chance to upgrade to a win7 64bit when a vista 32bit is installed...

Powerbook G4 hangs after few minutes of usage

Since February 06 I have a PB G4: 1.67GHZ, model Powerbook5,8
Since this weekend it hangs after a few minutes of usage.
I tried a whole load of possible solutions, like resetting the RAM, removing the battery and holding the powerbutton for 5 seconds...I even held it once for half a minute, but that didn't help. Checking the harddrive with disk utility (tried it often, but only once did the PB work long enough to get the end result: hard drive is healthy).
Often, when it hangs, I can get it to work by simply turning it off and on again. That gives me another window of 2 minutes of usage! Handy throughout the day when I need a file, or a document: I simply boot the machine, get the file and shut it down.
Carbon copy to an external HD does not work: the system hangs a few minutes after copying.
I installed a utility named applejack, and the first time I tried it, I got an interesting error: there were errors with the USB controller or USB bus, and system hangs. I didn't make a screenshot so this is out of the top of my head.
This was interesting because when I tried to make a HD copy (and believe me: I tried lots and lots of times), the system freezes first, and then an error about not unmounting a device popped into the screen. As if the touchpad, keyboards, and all other i/o devices stop working, and the system goes on for a few seconds more.
Sometimes the system just hangs, sometimes I get that black kernel panic screen.
Just before writing this, I tried the hardware test on the install CD once more:
Held down the option key, chose the hardware test -> quick test and..
system hangs after completion of the test
A message appeared in the bottom-left corner. Several lines of information, starting with:
"ERROR, Write to location ZERO detected!!, Loc zero was originally zero
Current File: Localization/en/Scripts/enAHTscript.sc"
etc
I live on a nice island in the Caribbean, so popping into the nearest Apple store means getting on a flight to Miami first.
What -if any- are my options? Is there something I can try to do myself before shipping it to Apple? Opening the case, checking this or that?
By the way, I originally posted this in the Titanium folder, but someone mentioned that I might actually have a Aluminum PB.
see http://discussions.apple.com/message.jspa?messageID=2074854#2074854

hi joeuu,
I have 1.5GB mem: one 512 stick and one 1GB and I already tried the sticks one at a time: it hangs with the original 512, it hangs with the 1GB and it hangs with them together in both possible slot settings.
I managed to copy the panic.log in /Library/Logs/ and here it is:
Fri Apr 7 15:27:21 2006
panic(cpu 0 caller 0x000A8D00): Uncorrectable machine check: pc = 00000000000AF340, msr = 0000000000141020, dsisr = 42000000, dar = 000000000280C200
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095BB0 0x0002683C 0x000A8D00 0x000A7F90 0x000ABC80
Proceeding back via exception chain:
Exception state (sv=0x41381A00)
PC=0x000AF340; MSR=0x00141020; DAR=0x0280C200; DSISR=0x42000000; LR=0x000AF158; R1=0x2211B8E0; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x404E9F24 0x404E1F6C 0x404E7B2C 0x002CEFB8 0x41C3F2C8 0x002BC0E8
0x002CDA70 0x002BC690 0x002BBB4C 0x002BBA5C 0x404E3954 0x404E3B98 0x002CE900 0x002CD7C8
0x000A9814
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBTrackpad(1.3.0f1)@0x41c3d000
dependency: com.apple.iokit.IOUSBFamily(2.2.5)@0x404aa000
dependency: com.apple.iokit.IOHIDFamily(1.4.3)@0x32671000
com.apple.driver.AppleUSBOHCI(2.2.5)@0x404df000
dependency: com.apple.iokit.IOUSBFamily(2.2.5)@0x404aa000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x323bf000
Exception state (sv=0x402ABA00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.5.11.obj~1/RELEASE_PPC
Now what can we read from this?
I see in here "AppleUSBTrackpad" and "AppleUSBOHCI".
Referring to my original post: I have seen an error (a few days ago, when working with applejack) that also mentioned USB.
I'm very afraid that this is a hardware issue. Reading through some other posts, I saw something about a ribbon that gave problems. What are your thoughts?

Lenovo T61 (Product 6458-W2R): explorer.exe hangs after logon - WinXP SP2

+++ english below +++
[german/deutsch]
Wir setzen in unserem Unternehmen mehrere ThinkPad T61 ein. Bei einigen dieser ThinkPad T61 (und nur beim ThinkPad T61!) haben wir inzwischen ein seltsames Phänomen, welches im Laufe der letzten 1-2 Monate auftrat und noch auftritt. Dieses Phänomen trat nicht gleichzeitig auf, sondern nacheinander. Und es tritt willkürlich auf. Der jüngste Fall ist gerade 1 Tag alt. Inzwischen sind 6 ThinkPad T61 davon betroffen.
Alle ThinkPad T61 sind Mitglieder einer Domäne (Windows Server 2003) und durchlaufen ein Loginscript. Das Loginscript beinhaltet Batchbefehle, Kix32 (für das Mappen von Netzwerklaufwerken und Druckern) und Teile der Matrix42 Empirum Management Software (für Softwaredistribution und Inventarisierung). Es werden Gruppenrichtlinien angewendet. Es werden via Matrix42 Empirum automatisch die neuen Patches und Updates seitens Microsoft auf alle Computer verteilt. Alle Computer erhalten eine unbeaufsichtigte/standardisierte Installation via Matrix42 Empirum Management Software (ähnlich einem Image und der unbeaufsichtigten Windows-Installation). Auf allen Rechnern ist Windows XP mit Service Pack 2 installiert. Spezielle Software ist in der Regel nicht drauf, nur Microsoft Office 2003, der aktuelle Acrobat Reader sowie die aktuellen Standardplayer: Windows Media Player, Quicktime Player, RealPlayer, VLC media player. Ggf. noch Nero 7 Standard bzw. Platinum (Spezielle Version). Alle IBM/Lenovo ThinkPad verwenden zusätzlich die IBM/Lenovo-Utilities „ThinkVantage“. Das Phänomen tritt unabhängig davon auf, ob das ThinkPad T61 in einer Dockingstation betrieben wird oder nicht. Es ist auf jedem Computer in der Windows Registrierung eingestellt, dass der Desktop erst geladen wird, wenn das Loginscript durchgelaufen ist.
Nun zur genauen Fehlerbeschreibung:
Manchmal kann es bei einem Kaltstart vorkommen, dass nach der Anmeldung und nach dem Loginscript –während der komplette Desktop und die Startleiste bereits sichtbar sind und noch einige Dienste geladen werden– sich die explorer.exe aufhängt. Die Startleiste lässt sich nicht bedienen. Ebenfalls lassen sich dann auch auf dem Desktop keine Symbole doppelklicken.
Wir setzen auch andere Computer ein, wo dieses Phänomen nicht auftritt, u.a.:
- HP-Computer (Desktops, Evo SFF Series)
- Fujitsu-Siemens-Computer (Desktops, ESPRIMO E Series)
- IBM ThinkPad T20/21
- IBM ThinkPad T40/T41/T42
- IBM/Lenovo ThinkPad T60
Das Problem tritt nur auf den noch relativ neuen ThinkPad T61 auf.
Wir haben bereits einen ziemlich ähnlichen Fall unter…
http://forums.techarena.in/showthread.php?t=694888&page=1
http://forums.techarena.in/showthread.php?t=694888&page=2
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_22718276.html …gefunden.
[english]
Unfortunately, I’m not fluent in the english language.
We use a few ThinkPad T61’s in our company. Meanwhile, at some ThinkPad T61’s (only ThinkPad T61!) we have a strange problem. This problem appears since the last 1-2 months and it still does exist. This problem does not appear at the same time, it does appear successive. And it appears random. The last case is 1 day old. Meanwhile, 6 ThinkPad T61 are concerned.
All ThinkPad T61 are members of a domain (Windows Server 2003) and do execute a logon script. The logon script contains Batch commands, Kix32 (for mapping network drives and printers) and parts of the Matrix42 Empirum Management software (for software distribution and inventory scan). Group policies will apply. Patches and updates will install on every computer via Matrix42 Empirum automatically. All computers get a default/unattended installation via Matrix42 Empirum Management software (everywhere between an image and an unattended Windows installation). All computers have installed Windows XP with Service Pack 2. As a rule, special software isn’t installed, only Microsoft Office 2003, the actual Acrobat Reader and the actual default players: Windows Media Player, Quicktime Player, RealPlayer, VLC media player. Sometimes, there is installed the Nero 7 Standard or rather Platinum (Special Edition) yet. All IBM/Lenovo ThinkPad use IBM/Lenovo-Utilities „ThinkVantage“ additionally. The problem exists if the ThinkPad T61 is connected to a docking station and also if the ThinkPad T61 is disconnected from a docking station. On every computer exists a registry key which arranges it that the desktop only will be loaded after the logon script did run.
Now the detailed error description:
Sometimes the explorer.exe hangs after the cold start. i.e.: The desktop (with icons and task bar) appears complete. But the computer hangs if you try to click on the task bar or double click on any icons. The computer will only run if we kill the process ‘explorer.exe’ and if we restart the explorer.exe.
We use also other computers with the same installation and the same group policies where the problem does not exist, for example:
- HP-Computer (Desktops, Evo SFF Series)
- Fujitsu-Siemens-Computer (Desktops, ESPRIMO E Series)
- IBM ThinkPad T20/21
- IBM ThinkPad T40/T41/T42
- IBM/Lenovo ThinkPad T60
Only the new ThinkPad T61’s have this problem.
We have found a similar case at…
http://forums.techarena.in/showthread.php?t=694888&page=1
http://forums.techarena.in/showthread.php?t=694888&page=2
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_22718276.html
Vielen Dank / Many thanks!

I would run System Update and make sure I had all the updates available.
Another thing to try is:
1. Right-click on My Computer and click Properties
2. Click on the Advanced tab
3. Click on Settings under Performance
4. Click on Data Execution Prevention
5. Click on Turn on DEP for all programs and services except those I select, then check Windows Explorer
We had to do that to some machines here after a push from corporate of the new ScriptLogic.This solved the problem.
ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
Windows 7 Enterprise and Windows XP Pro

Urgent----OC4J Hanging After every 4-5 Hours

Respected All Oracle ADF Users,
I Have Developed very large ADF (ADF BC Swing) Application i.e. One ERP Product, It Contains 300 Application Modules (Forms). I deployed this Application as EJB Session Bean on standalone OC4J which is on Fedora Core 3. There is Very Huge Data Entry, Data Fetching through this Application. (Daily 100000 Records Insertions)
Now problem is, when I start OC4J it goes fine for next 4-5 hours, but after 4-5 hours it get hang or my application get hang .if I restart my OC4J then it will run fine for next 4-5 hours and after 4-5 hours again it hanging ,so in a day I have to restart OC4J 4 times.
So I can u tell me
1) Is OC4J not support such kind of large application?
2) Weather I have to go for Oracle Application Server?
3) Is there any kind of setting needs for same problem?
4) Is this an Operating System Problem?
5) Is this a Server Compatibility Problem?
Please guide me.
Thanks

Hello,
I ran into a similar problem running an application server instance on a SLES 9 machine. My application was much smaller than yours and it turned out that I was forgetting to release a connection to an LDAP server from Java code. So, I suggest you have a look at all suspicious bits of code first.
Regarding the going to Oracle IAS, I would certainly advice you to do so.
Finally, a last piece of experience that I can share with you is that before getting SLES I used to run my application server on SuSE 8.2. While all the required packages were there the ias instance appeared to use all the available system memory. The issue was resolved until I finally installed the Oracle supported SLES.
If you like the Red Hat "look and feel" but still don't want to get a Linux that requires subscription like Oracle EL, why not try CentOS (www.centos.org) which appears to be a very good Red Hat clone.
Thanassis

Windows Server 2012 Hangs After a While

Good day,
My server hangs after a while then I have to hard boot it. I get the error 'Online data retrieval occurs under all my roles. Once I reboot it then the error disappears.
Please help!!
Thanks,
Mao

First of all, you would need to make sure that your server meets the hardware requirements to run Windows Server 2012 + the applications you use.
For Windows Server 2012 System Requirements, you can refer to that: https://technet.microsoft.com/en-us/library/dn303418.aspx
You can also proceed like the following:
Install available Windows Updates (To be tested first)
Install recent versions of your drivers, firmware and BIOS
Uninstall all unused programs
Run chkdsk /r /f and sfc /scannow
Do a clean boot
If this does not help then you can temporary disable security software in use and try again.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

MacBook Pro Retina Mountain Lion + Dell U2713hm hangs after wake-up

This is a more specific description of my problems here:
https://discussions.apple.com/thread/4385171
I use a Dell U2713hm together with a MacBookPro Retina under Mountain Lion. The Dell is connected via the Thunderboldt to DVI-D adapter that is sold by apple. The Dell has a USB 3 Hub. The upstream is connected to the Apple-DVI adapter. I use a mouse and a Logitech keyboard, which are connected to the Dell USB hub.
The display blanks from time to time for some seconds, which is suboptimal and I would be greateful if this could be fixed. But the biggest problem is that the system hangs after wake up. Sometimes the external monitor just stays dark, sometimes I get the login screen, but cannot type since the swapping wheel is shown. I have to reboot the machine.
To me this looks like a USB(3) sync problem.
If there are any ways around this I would be really glad. Is there a way to disable USB3? I also noticed that the speed of components that is displayed in the system profiler depends on the ports I use for keyboard, mouse and camera ...
Thanks!

The solution is to dump the 100€ mini-display port DVI-D adapter that apple sells and buy a mini-Display to Display-Port cable for 6€. No crashes, no annoying interruption of the display (which I had several times the day for 2 or 3 seconds). There are very short interruptions now, but it is much better than with the apple adapter. The apple adapter needs a USB port, which is not necessary with the simple cable.
As for the monitor: Burn In, otherwise great. The burn in can be erased via monitor menu but should not be there in the first place.
Hope this helps.

Itunes hang after latest updates

Since the last updates to my iMac iI find that the iTunes is constantly Hanging. It does not matter if I'm not using iTunes, as soon as its working in the background it hangs sooner or later. When I work with my music files in iTunes it usually hangs after less than 30 minutes.
How can this be?
I do not want to start with a new music player since I have used iTunes for the last 10 years and I have all my music in it.
But the way its acting now it seem like I have to use something else since iTunes is simply not working properly.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Safari hangs after 10.4.7 update

When I was running 10.4.6, Firefox and Safari were comparible in speed.
After I upgraded to 10.4.7, I'll enter a URL or click a link to another page, and Safari will just kinda hang after loading about half of the items on a page (according to the progress bar at the bottom). Usually if I re-request a page (clicking a link a second time, or re-entering the URL) the page will load completely. Firefox loads all pages as it did before.
I've done all the permissions repair thingys.
I've tried upgrading my flash player to flash 9 (just came out today, I think) but it didn't help, though flash 9 seems to now allow me to view spiketv.com videos that I wasn't able to see before.
I also did a "Reset Safari", and I think it helped a little, but the hanging problem persists.
Has anyone else experienced this since upgrading to 10.4.7?

I'm suffering from the same problem but it started a few days ago without me installing 10.4.7. It just hangs while downloading web pages. I don't mean the browser app hangs - I can still access menus. It just fails to download web pages. This will typically happen after, say, 30 minutes of use. I have reset Safari, switched of Java and Javascript, and it all has no effect. If I quit Safari and restart it cures the problem for a short while. If I disconnect from my wireless network and reconnect it has no effect. Meanwhile Firefox works fine so that's the browser I'll use until Apple fix Safari. The hang can happen mid-page, and then from that point no pages in any tabs will download.

Firefox hangs after answering yes to Firefox 4 upgrade

Today when My wife started Firefox from her account she was presented with a window asking if she wanted to update to Firefox 4. She answered yes. At that point Firefox (v3.6.16) became unresponsive with no indication that anything was happening. After some time she tried to shut down Firefox by clicking the X in the upper right corner of the window. She then got the Windows End Program box stating that the program was not responding and allowing her to shut the program down.
She then restarted Firefox and after what seemed to be a normal start up with the home page being displayed, Firefox would again hang after selecting a bookmarked site.
When my wife called my attention to this problem, I decided to try it from my Windows XP account to see if the problem only happened in her account. When I first opened Firefox, I briefly saw a progress bar indicating Firefox was being updated. Firefax then opened and loaded two tabs, my home page which is set to the google.com/firefox start page and the same Firefox 4 anouncement page that my wife got when she first started Firefox. When I then selected most bookmarked web sites or even the Firefox Support link on the home page, Firefox would hang and require ending the task to exit. Terminating Firefox in this manner, and restarting Firefox produced the same result. Rebooting the PC after terminating Firefox also produced the same result. Using IE8 to visit the same web sites was successful and resulted in no hangups. In fact, I am currently using IE8 to post this question.
After restarting and trying many web sites, I did find some sites that opened normally. One was the About Mozilla link on the home page and another was a local weather site: wunderground.com.
I also ran Firefox in safe mode from the command line and got the same hanging which I understand indicates that the problem is not being caused by any plugins or extensions.
Any suggestions as to how I can fix this problem would be greatly appreciated.

Thanks for the suggestions. As it turned out Firefox seemed to fix itself!!! First I must add that I don't believe that my wife clicking on the Firefox 4 update button had anything to do with the hangups. There was no indication that anything had been downloaded. Firefox would start normally but hang when trying to load most web sites. Usually a progress bar would be displayed at the bottom of the page that would never completely load. Clicking on the "Stop loading this page" button would only result in the Firefox symbol at the top left corner turning to a white square and Firefox would become non-responsive requiring an end task to shut down. It acted like an Internet problem but as I reported before, when I tried the same sites in IE they loaded properly. Also rebooting had no immediate effect.
As I kept trying in my account, more and more web sites started to load properly. After a couple of days, there were no more hang ups occurring at all in my account. The only changes I had made was to disable a couple of extensions: DownloadHelper and Freecorder Community Toolbar in my account. These were never installed in my wife's account and had no immediate effect after disabling them. Unfortunately, Firefox would still hang in my wife's account. She had changed the default browser to IE and when I opened Firefox in her account I got the message box asking if I wanted to change the default to Firefox. At that point clicking on anything resulted in a hang as before. I even tried setting the default browser back to Firefox in Windows "Set Program Access and Defaults" and rebooting but got the same result when I tried running Firefox again.
Now, after doing nothing to Firefox for a couple of days, Firefox is working correctly in both accounts??? I did notice a lot of hard drive activity during the time I was working this problem. Hmmm.
I use Norton 360 v4 as my security protection on this machine. They have now released v5 which I am about to upgrade to. I wonder if their LiveUpdate was doing something that affected Firefox?
I think I will wait awhile before trying to update to Firefox 4.

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Firefox was working fine in the morning, after half a day, it just crashed and now every time i try to start FF it crashes, i reinstalled FF, even tryed FF 4 beta, every time same crash report window, and nothing happens.

After a half day working normally, FF just crashed, and now i reinstall it, even tryed FF 4 beta, and still getting crash report. Cant even start in safe mode, same crash report window pop up.
Checked for viruses, malwares. Nothing helped.

Other applications print okay? If so, try deleting the Preview .plist
You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~`/Library. Delete the .plist(s) for the application.
If you prefer to make your user library permanently visible, use the Terminal command found below. It does work with Mountain Lion:
http://osxdaily.com/2011/07/22/access-user-library-folder-in-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

Iphoto hangs after upgrading to Yosemite and latest iPhoto version

It tells me the library needs upgrading, and starts to search the library. The progress bar suggests something is happening then hangs after about 99% completion. I have had to force close twice after several hours stuck at that point and then start the whole process from scratch when I restart.

Have you followed these instructions - http://www.fatcatsoftware.com/iplm/Help/rebuilding%20a%20corrupted%20iphoto%20li brary.html
iPhoto Library Manager > Help > Rebuilding a corrupted iPhoto library
Printable help
Rebuilding a corrupted iPhoto library
If you have an iPhoto library that is corrupt and causing iPhoto to crash or otherwise be unusable, iPhoto Library Manager provides the ability to rebuild your library based on the information found in its library data files. Note that iPhoto also has a built-in rebuild function that can be sometimes be used to repair a corrupted library database. You can find instructions on how to use that on Apple's website at http://support.apple.com/kb/HT2638 (iPhoto 6 or later) or http://support.apple.com/kb/HT2042 (iPhoto 5 or earlier).
iPhoto Library Manager's rebuild works differently, in that instead of trying to repair the library in place, it creates a brand new library and tries to reimport the entire contents of the original library into the new one, including reconstructing albums, photo metadata, etc. Note that rebuilding a library has all the same limitations as other photo transfer operations as far as what can and can't be copied between libraries. Also, depending on how badly damaged the library is, iPhoto Library Manager may or may not be able to piece together some or all of the library metadata.
To start a rebuild, select the library you would like to rebuild, then choose the "Rebuild Library" item from the "Library" menu. You will be prompted to choose a location for the rebuilt library, and whether or not you want iPLM to scavenge orphaned photos it finds in the library package. Once you've made your choices, iPLM will examine the library and rebuild the library structure and photos as best it can, then display you a preview of what it was able to find. If your library is badly damaged and the preview is missing a lot of content from the original library, this can save you from going through with a rebuild that won’t end up being of much help.
Once you've had a chance to examine the preview, if you want to go forward and create the rebuilt library, click the "Rebuild" button in the upper right. iPhoto Library Manager will create a new library and start importing the contents of the original library into the new one.
Scavenging photos
In some cases, either the iPhoto library database is too damaged for iPhoto Library Manager to be able to salvage any information from it, or the library data is incomplete and there are photos that still exist inside the library package, but iPhoto has lost track of them. In these cases, you may want to check the "Scavenge orphaned photos" checkbox when choosing a location for the rebuilt library. After iPhoto Library Manager has read the library data as best it can, it will perform an additional pass through the package and locate any photos that are no longer referenced in the library database. Any additional photos that are found will be included in the rebuild, and a new "Scavenged Photos" album will be created in the rebuilt library containing any scavenged photos.
LN

Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

Hello HaithamOkeely,
We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

OCFJ Hanging after 5-7 days

Similar Messages

Maybe you are looking for