Odd error originating from NI-5411 (Error code: BFFA0002) when trying to load arbitrary waveform

Hello everyone. 
We have some equipment (PCI NI-5411) that is misbehaving in an odd and new way. When trying to load an arbitrary waveform onto the AWG (using a library call to the "niFgen Write Binary 16 Waveform"), it produces an error. The error code is "BFFA0002", but I haven't been able to find any information that can show what this error code provides. Previously, we had some problem when the system wouldn't find the file and produces an error even though the file is there. After changing our code so the file access is attempted several times, the problem was resolved. However, that doesn't work in this case and we do not know here the problem is.
This is a pretty much shooting wild and hoping that something falls down, but if anyone could provide me with information about the error code or another probable error source I would be highly grateful.
Thanks in advance!
With best regards,
Niclas

Hi Niclas,
That error code suggests that a file cannot be opened. This error is defined in IVI as  IVI_ERROR_CANNOT_OPEN_FILE.I don't think we return this error code from the NI-FGEN driver.
You mentioned that you have an issue with finding a file. Is that file specific to your application? How is it being open or used? What API do you use to open that file?
For NI-FGEN specific error code (and generic IVI error codes), you can query the error message by calling niFgen_error_message function or niFgen Error Message.vi.
Thanks,
- Liusdi

Similar Messages

  • Error code 32768 when trying to use recovery disks

    does ayone know what an 32768 error code is when trying to load recovery disks and how to solve it will not load windows  from ram drive any help is appreciateded thanks... bobby

    Hello,
    Clear now. Your created recovery disk will not be supported on your unit. You need original HP recovery kit (708649-DH1) to recover your unit. Please share privately your name/address/phone and RCD kit will be shipped to you.
    I am an HP employee.

  • Getting error code 109 when trying to open pdf from an email i received

    Hi , Im getting error cod 109 when I try to open a pdf from a contact. all other pdf open fine

    I receive an error code = 0x40010015 when trying to open a PDF in Photoshop CS3 for windows.
    I do not have Illustrator to open and re-save as the forum discussion indicated.
    Is there another way to open a PDF with this error code?  I work with Quark, Photoshop and Publisher
    MartyMag22

  • How do you resolve error code 36 when trying to restore an iPad that has been reset to original settings?

    How do you resolve error code 36 when trying to restore an iPad that has been reset to original settings?

    MB-
    As far as I can tell, Error Code 36 is an "I/O Error".  It may mean you have a bad USB cable between the iPad and your computer, or the cable was not plugged in firmly.
    See if this helps with your Restore:  <iOS:  Unable to Update or Restore>.
    Fred

  • Error code = 0x40010015 when trying to open PDF in PS CS3

    Greetings:
    I'm having a problem opening a PDF file in Photoshop.
    This is the error message:
    Error Opening the Portable Document File
    (PDF) Document. Error Code =
    0x40010015
    Searching the Adobe Forums, Knowledge Base, and even Google has turned up no results. Any idea what the problem may be?
    My process has been taking a PDF file created from QuarkXpress (6.5) and opening it in Acrobat Pro (8.1.2) and doing a save as and replacing the current pdf. Then I open this new PDF file in Photoshop CS3 (10.0.1) and apply actions. No problems. Then I encountered this one file that won't open in Photoshop, but will open in Acrobat, Preview, Illustrator. I get the following error message.
    I'm using a G5 PowerPC Mac (4 x 2.5 GHz Processor) with 6.5 GB DDR2 SDRAM for memory. Mac OS X version 10.4.11 (haven't switched to Leopard yet) Adobe Creative Suite 3 Design Premium software package.
    Thanks,
    Randy Hinderks
    Art Director / Video Editor
    On-Purpos, Inc.

    I receive an error code = 0x40010015 when trying to open a PDF in Photoshop CS3 for windows.
    I do not have Illustrator to open and re-save as the forum discussion indicated.
    Is there another way to open a PDF with this error code?  I work with Quark, Photoshop and Publisher
    MartyMag22

  • Error code 0x80092013 when trying to access iTunes store

    I currently have the lastest version of iTunes unstalled on a Windows Vista PC. For a few months now, I get the error code 0x80092013 when trying to connect to the iTunes store or log in to my iTunes account. I have tried to run diagnostics but there is no help availavle because iTunes will not connect to the internet to get the help I need.
    I have scoured the interent for a solution to this problem and have tried everything I have come accross, from re-installing to reading every support page I can find. I am becoming so frustrated trying to fix this problem, it is not my apple ID as my iPad works perfectly fine. If anyone can give me a solution that actually works it would be greatley appreciated

    After some research I found the following tip to be working:
    https://discussions.apple.com/message/25038447#25038447
    So I changed my IPv4 as well as IPv6 DNS-Servers under Windows Network Preferences and everything worked again.
    HTH
    Christian

  • Error code 306 when trying to connect to apple store

    error code 306 when trying to connect to apple store

    Refer here from Apple Article:
    iTunes Store loads partially or returns "Error 306" or "Error 10054"
    Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
    To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
    To reset iTunes Store cache:
    In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
    Click the Advanced tab.
    Click the "Reset cache" button.
    Click OK and see if the issue is resolved.
      Adjust Parental Controls in iTunes: 
    Open iTunes.
    Access iTunes preferences: 
    On a Mac: From the iTunes menu, choose Preferences.
    On a Windows PC: From the Edit menu, choose Preferences.
    Click the Parental Controls tab.
    Remove restrictions on Parental Controls.
    For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
    For more information on other security software, see iTunes: Troubleshooting security software issues.

  • HT1918 why do I keep getting error code 5002 when trying to make a purchase? Has been almost a week now!

      Why do I keep getting Error Code 5002 when trying to make a purchase from the Itunes store? I am using Vista Home edition> havent had any problems before. This has been going on for a week.

    This alert is often the result of an issue with verifying your billing.
    Quit iTunes.
    Open iTunes.
    Test the issue.
    If it persists, sign in to store.apple.com using your iTunes account
    Click on Change account information
    Modify or remove your credit card information.
    Click Continue.
    Test the issue.

  • I have an iPod 2nd gen. that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

    I have an iPod 2nd gen that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • I'm getting an error code 9 when trying to restore apple tv 2 thru iTunes any suggestions?

    I'm getting an error code 9 when trying to restore apple tv 2 thru iTunes any suggestions?  the error comes up when itunes tries to verify the update.  I hook the apple tv back to tv and says I need to connect to itunes.  the original problem was the power went out and the apple tv light kept blinking.  I tried restarting it but would not work.  Any Suggetstions?  Thank you.

    Try again tomorrow.  All Apple servers are undergoing a huge number of hits.  I think tomorrow or even the next day, all upgrade and activation servers will be in better shape.
    Any time millions of people want to do exactly the same thing online, there's always trouble, LOL.

  • TS3694 error code 3194 when trying to restore my ipad?

    error code 3194 when trying to restore my ipad?

    Hey bfcjamie,
    Thanks for the question. Error 3194 usually occurs when iTunes is unable to communicate with the update-and-restore server. The following articles may help to resolve your issue:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    http://support.apple.com/kb/TS4451
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    1. Install the latest version of iTunes.
    2. Check security software and ensure that communication to gs.apple.com is allowed. Follow these steps for assistance with security software.
    3. Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow the advanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    4. Try to restore from another known-good computer and network.
    5. If the errors persist on another computer, the device may need service.
    Thanks,
    Matt M.

  • TS3694 Error 3014 when trying to load ios6. I have cleared 2.5GB on the phone as it seems you need that ridiculous amount of space. Every time it just gives me 3014 error code within a minute of trying to download? Any help?

    Error 3014 when trying to load ios6. I have cleared 2.5GB on the phone (4s) as it seems you need that ridiculous amount of space. Every time it just gives me 3014 error code within a minute of trying to download? Any help?

    All,
    I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
    Thanks,
    Clif Bridegum

  • TS3694 keep geting error code 1015 when trying to update my iphone 3gs any tips to sort it out

    keep geting error code 1015 when trying to update my iphone 3gs any tips to sort it out

    https://discussions.apple.com/message/19425288#19425288
    https://discussions.apple.com/message/18882000#18882000
    https://discussions.apple.com/message/18526759#18526759
    http://support.apple.com/kb/TS3694?viewlocale=en_US
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    There is not much you can do, sorry 

  • I'm getting an error code (A12E1) when trying to install Creative Cloud for photographers. Agraphers

    I'm getting error code A12E1 when trying to install the Creative Cloud app for photographers. Can anyone help me get installed?

    Hi Redrock,
    Could you try the solutions described here:
    http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html
    Thanks,
    -Dave B

  • "An error occurred sending the command to the application" When trying to open excel document from outlook 2007

    Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
    OS: Windows Server 2008 R2
    If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
    Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can Create a trusted location follow these steps
    Click the Microsoft Office Button , and then click Excel Options.
    Click Trust Center, click Trust Center Settings, and then click
    Trusted Locations.
    If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
    box.
    Click Add new location.
     IMPORTANT   We recommended that you don't make your entire
    Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
    In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
    locate the folder.
    If you want to include subfolders as trusted locations, select the
    Subfolders of this location are also trusted check box.
    In the Description box, type what you want to describe the purpose of the trusted location.
    Click OK.
    More detailed information you can refer to this link:
    http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHN
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Maybe you are looking for

  • Major problems after 10.4.11 update!

    Warning: think seriously before upgrading to 10.4.11. I did this recently and the following happened: Update went well - computer started normally Then noticed that the Air Port wasnt working - was unable to find my network. After a restart, there wa

  • TV Show Sync Issue

    Hello, I have an new iPad 2 and can't sync TV shows anymore. I already deleted the SC Infor folder and tried everything else. While iTunes seem to sync the movie and iPad shows from a space perspective that the TV Show is on it, it still doesn't show

  • Table containing Budget for a given project

    Hi Gurus, I have a requirement to fetch the ROOT LEVEL Budget FOR a given Project. Can someone Throw some light on the tables involved and how they are linked. Thanks in Advance Deepak

  • Fireworks CS6 unstable in Mountain Lion?

    Hi folks,  I've got the latest versions of ML and FW and don't see any updates for FW.  I am seeing  increasingly bad behaviors in FW and fear it may be the end of the line for the program as Adobe seems to have abandoned any attempts to fix the prog

  • Listing: hide variable in a vertical position

    Hello, I know that I can save my global variable value using HIDE operator. But it stores value only for a line, I mean if i have many columns I get the value for all columns. I need to get different values for different rows and columns Do you know