Odd error when trying to repartition internal SSD

I'm trying to reset my Macbook Air rev. 4,2 (Mid 2011, Thunderbolt port) to factory defaults because I decided that having BootCamp and Linux running together was not what I wanted.
After using Disk Utility to remove the partitions created during the Windows install and split Linux install, I realised that something went wrong and this was a bad idea - Boot Camp assistant can now no longer use the disk, and I get this weird error when using diskutil to verify the internal SSD:
$ diskutil verifyDisk disk0
Started partition map verification on disk0
Checking prerequisites
Checking the partition list
Problems were found with the partition map which might prevent booting
Error: -69770: Partition map check failed because no slices were found
Using diskutil I get this:
$diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *251.0 GB   disk0
   1:                  Apple_HFS Macintosh HD            250.7 GB   disk0s1
Oops! Looks like I managed to delete my Recovery HD somehow when deleting the Boot Camp and Linux partition... no idea how this happened either. I certainly didn't want to...
I can still boot into OSX just fine, and I can partition the disk... it appears to work until I try to use Boot Camp to install Windows again - still no luck.
I have nothing important on the disk (using it for apps only and I can reinstall them easily) so I tried reinstalling Lion using Internet Recovery (since I no longer have the Recovery partition...) but it refuses to reinstall Lion because of the aforementioned error. I have GPT fdisk installed on my system and I believe it can recreate the required partition map for reinstalling the system but I'm a bit afraid to do that since the SSD appears to have these 'invisible' slices. I don't really want to end up with a bricked system.
Any ideas on how to proceed? Many thanks in advance!

Here's a solution for those who encounter this problem - there's no option but to boot from a recovery CD/internet recovery (Command + R before the Apple logo appears at startup) and use Disk Utility to reformat the entire disk and then reinstall Lion. Make sure to have backed up anything important to another drive before you do this because you will irreversibly lose your data (since reinstalling Lion will likely overwrite existing data on the disk).

Similar Messages

Error when trying to activate Internal Use Rights (IUR)

I am a Microsoft Silver partner. I am trying to activate my Azure Internal Use Rights (IUR). I am getting an error during the activation process. The error message is:
"MS-AZR-0025P IS NOT AVAILABLE"
I have taken screen shots of each step in the IUR activation process using Problem Steps Recorder. I can send them to you upon request.
I have opened support cases with Microsoft Partner Support and Microsoft Azure Billing Support. They suggested that I post my question here for a resolution.

Hi,
The Billing team should have assisted you with this issue since it requires access to your Account details.
However try the following steps if you havent tried these yet.
1) Open the Following link in an InPrivate Window (Internet Explorer press Ctrl+Shif+P) and check if you are still getting error.
https://account.windowsazure.com/signup?offer=MS-AZR-0025P
If that does not work, Try this.
http://azure.microsoft.com/en-us/offers/ms-azr-0027p/
2) Try using a different WLID (LiveID/Microsoft Account) to activate the offer if you already have a MPN offer on the same WLID.
3) The error may also be gerenated if the Silver Pack benefits is not being entitled to you. Call the Number 1-800-765-7768 to make sure that you are entitled to receive the silver pack benefits. you can alternatively to the website below to attempt to purchase
again.
https://mspartner.microsoft.com/en/us/pages/solutions/premium/windows-azure-cloud-partner-benefits.aspx
Let us know if this helps.
Regards,
Nithin Rathnakar

Odd error when trying to search on btplc

Is this at my end?
CFML Runtime Error
General SQL Error
Request
/search/index.cfm
File Trace
//rdfp0282/extranet/*********/search/index.cfm
|
+-- //rdfp0282/extranet/*********/search/SuggestedLinks.cfm
Type
Database
Query Error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
Datasource
BTPLC_SEARCH_LIVE
Native Error Code
SQL State
SQL
Tag Context
CFIF (//rdfp0282/extranet/*********/search/index.cfm, Line=547, Column=2)
|
+-- CFMODULE (//rdfp0282/extranet/*********/search/index.cfm, Line=589, Column=5)
    |
    +-- CFIF (//rdfp0282/extranet/*********/search/SuggestedLinks.cfm, Line=2, Column=1)
        |
        +-- CFSTOREDPROC (//rdfp0282/extranet/*********/search/SuggestedLinks.cfm, Line=9, Column=2)
Source
6 :
7 : <cfset strCriteria=ATTRIBUTES.Criteria >
8 : <cfset strMethod=ATTRIBUTES.Method >
9 : <cfstoredproc procedure="proc_SuggestedLinksFetch" datasource="#CALLER.dataSource#">
10: <cfprocparam dbvarname="@searchCriteria" cfsqltype="CF_SQL_VARCHAR" value="#strCriteria#">^ Snippet from underlying CFML source
-+-No longer a forum member-+-

caller
struct
APPLICATION
struct
Collections
thegroup,sharesandperformance,news,Societyandenvironment,innovation,careercentre
DSN
BTPLC_SEARCH_LIVE
FileExtensions
.html,.htm
Mode
[empty string]
Path
\\rdfp0282\extranet\*********
Url
http://www.btplc.com
CRRegScheme
Responsible business registrant
ContentTypeList
[empty string]
PathFromRoot
search\index.cfm
Quote
SearchCategory
careercentre
ShowAllPagesLink
YES
ShowPageLinks
0
TCriteria
TMethod
and
TPage
0
TPosition
0
TSearchCollection
[empty string]
TStartRow
[empty string]
TSummary
Yes
TType
[empty string]
blnSearchAll
1
catList
[empty string]
ctList
[empty string]
dataSource
BTPLC_SEARCH_LIVE
dsn2
bt_media_centre
dsn3
climate_change
intMaxPosition
10
intPageSize
10
intTotalResults
0
qrySuggested
[empty string]
rb10Checked
[empty string]
rb1Checked
CHECKED
rb2Checked
CHECKED
rb3Checked
CHECKED
rb4Checked
CHECKED
rb5Checked
CHECKED
rb6Checked
CHECKED
rb7Checked
[empty string]
rb8Checked
[empty string]
rb9Checked
[empty string]
sHaveResults
NO
searchCriteria
searchTermIds
[empty string]
searchwhat
all
splitbyCategory
[empty string]
strCollectionList
thegroup,sharesandperformance,news,btmcsqlnews,responsiblebusiness,btmcsqlSandE,innovation,careercentre
strDisplayCollections
[empty string]
strRoot
\\rdfp0282\extranet\*********\
cffile
struct [empty]
cfthread
struct [empty]
cgi
struct
AUTH_TYPE
[empty string]
AUTH_USER
[empty string]
CF_TEMPLATE_PATH
\\rdfp0282\extranet\*********\search\index.cfm
CONTENT_LENGTH
40
CONTENT_TYPE
application/x-www-form-urlencoded
CONTEXT_PATH
[empty string]
GATEWAY_INTERFACE
[empty string]
HTTPS
off
HTTP_ACCEPT
text/html,application/xhtml+xml,application/xml;q=(REMOVED BY ME)
HTTP_ACCEPT_CHARSET
ISO-8859-1,utf-8;q=(REMOVED BY ME)
HTTP_ACCEPT_ENCODING
gzip,deflate
HTTP_ACCEPT_LANGUAGE
en-gb,en;q=0.5
HTTP_AUTHORIZATION
Basic Og==
HTTP_CONNECTION
keep-alive
HTTP_CONTENT_LENGTH
40
HTTP_CONTENT_TYPE
application/x-www-form-urlencoded
HTTP_COOKIE
RD028cookie1=R*********
HTTP_HOST
www.btplc.com
HTTP_KEEP_ALIVE
115
HTTP_REFERER
http://www.btplc.com/News/Articles/Showarticle.cfm?ArticleID=(REMOVED BY ME)
HTTP_USER_AGENT
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-GB; rv:1.9.2.6) Gecko/******** Firefox/3.6.6
PATH_INFO
[empty string]
PATH_TRANSLATED
\\rdfp0282\extranet\*********\search\index.cfm
QUERY_STRING
[empty string]
REMOTE_ADDR
REMOTE_HOST
REMOTE_IDENT
[empty string]
REMOTE_USER
[empty string]
REQUEST_METHOD
POST
SCRIPT_NAME
/search/index.cfm
SERVER_NAME
www.btplc.com
SERVER_PORT
80
SERVER_PORT_SECURE
0
SERVER_PROTOCOL
HTTP/1.1
SERVER_SOFTWARE
Microsoft-IIS/6.0 BlueDragon.NET/7.1
Blue * denotes that I've removed the info
-+-No longer a forum member-+-

IChat Internal Error when trying to change own Buddy Icon

On my son's iBook G4 with OS 10.4.5 and iChat AV 3.1.1, he gets an error when trying to insert some JPG photos for his own Buddy Icon. It says:
iChat Internal error! NSInvalidargumentexception: * -[NSCFArray addObject:] attempt to insert nil
Also where are all your recent pictures stored??? Upon searching iChat Recent Pictures on my HD, it see they should be User>Library>Images>iChat Recent Pictures. However upon tyring to open that fiel, I get a message saying, "The alias 'ichat Recent Pictures' could not be opened, because the original item cannot be found." I can select delete alias, fix alias or ok. Might this also relate to my problem?

Hi Michael,
I pointed you to that thread as the error message you posted is normally associated with either a spellcheck problem or something odd with the Me Card in the Address Book.
You can drag pics to the Recent Buddies folder but iChat will not see them.
Create a New Folder and call it iChat Recent Pictures
The alias should be removed.
You should now find that iChat will let you select a choice as a new Buddy Pic.
This is done by clicking on the current Buddy pica nad selecting the "Edit Picture" option.
Then "Choose".
Navigate to the Pic and then resize as require.
Use the "Set" button.
This will convert the pic to a jpeg 2000 copy of the original and the Recents.plist which is needed within the folder.
You should now be good to go.
2:03 PM Friday; February 24, 2006

Internal unkown error when trying to import a web service

Hi!!!
I need help to achive the possiblity to select methods from a web service, I get following errors:
NET Web Service Proxy Tool Report for Web Service:
Monday, May 14, 2007 10:53:44 AM
Web Service URL: http://10.110.30.228/automation/v1.wsdl
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Internal Unknown Error.
Please contact National Instruments for help.
C:\Program Files\National Instruments\LabVIEW 8.2\user.lib\WebService\chassie\.dll
In addition, when opning Labview software I get a message that I do not have permission to read dll file located in directory of webservice.
Hope for quick response.
Best regards A

Hi!!
I did make a try with http post (see attachment) with the aim to send a soap xml in the http post.
I do get an error when trying to parse the soap message (see message below).
Do you have suggestions for improvement of this VI???
All advice will be appresiated.
A
#####################################################################################################3
HTTP/1.0 200 OK
Date: Tue, 15 May 2007 13:24:20 GMT
Server: Boa/0.94.13
Connection: close
Content-type: text/xml
Cache-Control: no-store
Expires: -1
<?xml version="1.0"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<env:Body>
    <env:Fault>
      <env:Code>
        <env:Value>envender</env:Value>
      </env:Code>
      <env:Reason>
        <env:Text xml:lang="en">Failed to parse SOAP message</env:Text>
      </env:Reason>
    </env:Fault>
</env:Body>
</env:Envelope>#########################################################################
Attachments:
Soap_post html.vi ‏31 KB

"500 internal server error" when trying to use F4 help in the variable sele

Hi Experts,
I am getting "500 internal server error" when trying to use F4 help in the variable selection screen (in WAD).
How could this be resolved?
Quick reply would be very helpfull.
Thanks in advance !!

It seems you are using wrong client ID. Make sure your logon pad has right details. You should verify this with your basis team.
If the problem persists then try re-installing. But before you do that you can execute sapbexc.xla which is in the c:\program files\sap\bw. Type c:\ in cell c3 and click "start button". Any red flag means you have wrong version dll/ocx on your local drive, in that case you should reinstall with right patches.
if this solution helps u then pls assign points

500 internal server error when trying to create users

I am getting a 500 internal server error when trying to create users. What is the cause? We tried reinstalling the latest java jdk release and that didn't help.

Check whether your DBControl or ASControl service is still running or crashed. EM is not able to connect to the Management Server.
For instance in Windows, you may see that the Servise is not started. Then check for error logs in $ORACLE_HOME/sysman/logs for any related error messages in the log files

HTTP error when trying to access RESTful web service from application

Hi,
We are getting the following error when trying to access a RESTful web service coming from Apex workspace 4.2.1 and Apex listener 2.1:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-29024: Certificate validation failure
In the Debug report, besides the above I also see:
error_backtrace: ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 543 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 1164 ORA-06512: at "APEX_040200.WWV_FLOW_PROCESS", line 396
We get that error whether we use https or http in the URI pointing to the web service. When I test the Web Service in Workspace RESTful service GUI, I get the data back. When I go build an application with a report calling the RESTful Web Service I get that error. Both the Application and the Workspace RESTful services are on the same Apex environment and even the same workspace.
What is odd is that I can actually put the URL of the web service into a browser and I get the data: (using the demo hr data in sample RESTful services.)
IN browser-- https://weblogic-dev.edu/apex/ace/hr/empinfo/
yields:
7839,KING,PRESIDENT,,1981-11-17T05:00:00Z,5000,,10 7698,BLAKE,MANAGER,7839,1981-05-01T04:00:00Z,2850,,30 7782,CLARK,MANAGER,7839,1981-06-09T04:00:00Z,2450,,10 7566,JONES,MANAGER,7839,1981-04-02T05:00:00Z,2975,,20 7788,SCOTT,ANALYST,7566,1982-12-09T05:00:00Z,3000,,20 7902,FORD,ANALYST,7566,1981-12-03T05:00:00Z,3000,,20 7369,SMITH,CLERK,7902,1980-12-17T05:00:00Z,800,,20 7499,ALLEN,SALESMAN,7698,1981-02-20T05:00:00Z,1600,300,30 7521,WARD,SALESMAN,7698,1981-02-22T05:00:00Z,1250,500,30 7654,MARTIN,SALESMAN,7698,1981-09-28T04:00:00Z,1250,1400,30 7844,TURNER,SALESMAN,7698,1981-09-08T04:00:00Z,1500,0,30 7876,ADAMS,CLERK,7788,1983-01-12T05:00:00Z,1100,,20 7900,JAMES,CLERK,7698,1981-12-03T05:00:00Z,950,,30 7934,MILLER,CLERK,7782,1982-01-23T05:00:00Z,1300,,10
Any ideas on what would be causing the Error above in our application?
Thanks,
Pat
Edited by: patfmnd on Mar 11, 2013 3:25 PM
In reviewing the above error, I think we are realizing that we have to have the Weblogic layer SSL cert (actually the CERT from our BigIP load balancer which also does our SSL termination) imported into the Oracle server wallet where Apex is installed. Am I correct?
PM

We resolved our problem. The Apex Administrative Guide made us realize that we had to set up Wallet path in the Instance. This required working with DBAs to follow the Advanced networking guide to get the wallet set up on our server. We then added that path to the Instance configuration. (Manager Instance --> Instance settings). We ran into another other issue related to our implementation of CAS but were able to resolve that, and 'voila' were able to get the sample RESTful service consumed by our application!!
Now to the task of figuring out how to get Basic Auth working between client application and RESTful web service. If anyone has that working, let us know!!
It would be helpful if in the documentation of the Apex 2.x listener or Apex install/configuration there was clear reference to the above steps required for HTTPS access to RESTful web services.
Pat

Error when trying to create XUSER information for SAPServiceSID

Hi all,
I am getting the following error when trying to create the XUSER information for the SAPServiceSID user on a WINDOWS/MAXDB 7.9 install.. Does anyone know a FIX for this?
>xuser -c .\SAPServiceSID -U c -u CONTROL,P@ssw0rd -d SID -n HOSTNAME -S INTERNAL -t 0 -I 0 set
FATAL: Close xuser entry failed: could not write USER data [1307]
I am running the command as the SIDADM user.
I have tried the solutions in the following notes without success:
39642
1542818
39439
1875264
1409913
Thanks!

Hi Jayson,
Try this.
Solution
Add the "Administrators" group under:
Control Panel
-> All Control Panel Items
   -> Administrative Tools
      -> Local Security Policy
         -> Local Policies
            -> User Rights Assignment
              -> Take ownership of files or other objects
You check you command and modify.
xuser.exe -c Hostname\SAPServiceSID -U DEFAULT -u Username, Password -d SID -n Hostname -S Schema_Name -t 0 -I 0 set'
Regards,
V Srinivasan

Gettign this error when trying to access webpage using JRE V 1.4.2_06

Gettign this error when trying to access webpage using JRE V 1.4.2_06
Any suggestions?
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
load: class com.adp.e.hrclient.Client.class not found.
java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

Error when trying to register DB using srvctl

Hello -
I am getting this error when trying to add this database:
PRKP-1073 : Cannot create database m433ddg because a database named m433ddg already exists.
However, I have verified the DB does not exist:
[oracle@ctolinuxpoc02 ~]$ crs_stat
NAME=ora.ctolinuxpoc01.ASM1.asm
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc01
NAME=ora.ctolinuxpoc01.LISTENER_CTOLINUXPOC01.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc01
NAME=ora.ctolinuxpoc01.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc01
NAME=ora.ctolinuxpoc01.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc01
NAME=ora.ctolinuxpoc01.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc01
NAME=ora.ctolinuxpoc02.ASM2.asm
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc02
NAME=ora.ctolinuxpoc02.LISTENER_CTOLINUXPOC02.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc02
NAME=ora.ctolinuxpoc02.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc02
NAME=ora.ctolinuxpoc02.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc02
NAME=ora.ctolinuxpoc02.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on ctolinuxpoc02
Any ideas are greatly appreciated!
Thanks,
Mike

Hi Mike,
I remember, you had an issue that you had a corrupted OCR once. That seems to be the case here again....
In general, if SRVCTL complains that it cannot register a DB, since the DB with that name is already registered, this could be a sign that internally (obviously the former database does not show in the crs_stat output) Clusterware can still find fragments of the formerly registered DB. What you can try to do: run an ocrdump as root and check the output file for "m433ddg" and see whether it finds something.
Let me know, please. Thanks,
Markus
Edited by: MarkusM on Apr 20, 2009 5:24 PM - Reason: typos

Error when writing to the Internal Buffer-runtime error during querydisplay

Hi
I am working in BW 3.5. I am trying to run a query in BEx Analyzer but I am getting the following Error
Error when writing in the Internal Buffer see OSS note 156957
I tried for the note but I am not getting relevant information.
Please let me know what to do.
Thanks,
Padma

Hi,
please apply the note 1614788. After note implementation, you need to set parameter RSR_HIER_THRESHOLD_EXPORTDB in table RSADMIN via report SAP_RSADMIN_MAINTAIN in transaction SE38.
If you set this parameter to value 50.000 for example, all hierarchies with more than 50.000 nodes will be buffered in the database instead of using the export/import buffer.
To find out the current size of a hierarchy, goto the hierarchy maintenance in transaction RSH1 and copy the hierarchie ID from the header data. With this key you can goto transaction SE16 and select table RSRHIEDIR_OLAP (Field HIEID is the hierarchy ID).
It should resolved your issue.
Thanks,
Venkat

500 Error when trying to log into app

We are working on upgrading to WLS 9.1 from WLS 8.1 sp5. We have successfully built and deployed our ear file and our portal.war file using the 9.1 and java 1.5. However, I get the following error when trying to access the login page.
Error 500--Internal Server Error
javax.faces.FacesException
     at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:356)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:107)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Caused by: java.io.IOException
     at weblogic.servlet.jsp.BodyContentImpl.flush(BodyContentImpl.java:72)
     at javax.faces.webapp._PageContextOutWriter.flush(_PageContextOutWriter.java:45)
     at org.apache.myfaces.renderkit.html.HtmlResponseWriterImpl.endDocument(HtmlResponseWriterImpl.java:181)
     at org.apache.myfaces.taglib.core.ViewTag.doEndTag(ViewTag.java:110)
     at jsp_servlet.__login._jspService(__login.java:620)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:496)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
     at org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:415)
     at org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:234)
     at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:352)
     ... 13 more
Any ideas as to what could be causing this? This is currently being built and deployed on my local machine.
Thanks.

bftanner or any other WL 8.1 -> 9.x migration veterans,
I'm experiencing the same error as below. Can anyone recommend a fix?
Thanks!
-Chip
- Can't insert page '/common/appHeader.jsp' : null
java.io.IOException
at weblogic.servlet.jsp.BodyContentImpl.flush(BodyContentImpl.java:72)
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag(InsertTag.java:889)
at org.apache.struts.taglib.tiles.InsertTag.doEndTag(InsertTag.java:462)
at jsp_servlet._layout.__appdashboardlayout._jsp__tag7(__appdashboardlayout.java:470)
at jsp_servlet._layout.__appdashboardlayout._jsp__tag6(__appdashboardlayout.java:409)
at jsp_servlet._layout.__appdashboardlayout._jspService(__appdashboardlayout.java:205)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:394)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:309)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.chase.gcrm.approvals.web.security.LoginFilter.doFilter(LoginFilter.java:90)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:261)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
at org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProcessor.java:263)
at org.apache.struts.tiles.TilesRequestProcessor.processTilesDefinition(TilesRequestProcessor.java:239)
at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(TilesRequestProcessor.java:302)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.chase.gcrm.approvals.web.security.PermissionFilter.doFilter(PermissionFilter.java:133)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.chase.gcrm.approvals.web.security.LoginFilter.doFilter(LoginFilter.java:90)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3229)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1362)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
<Aug 10, 2007 4:13:19 PM CDT> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.internal.WebAppServletContext@1ce0e18 - app
Name: 'arc_ear-3.5.0', name: 'approvals', context-path: '/approvals', version: @3.5.0] Root cause of ServletException.
javax.servlet.jsp.JspException: Can't insert page '/common/appHeader.jsp' : null
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag(InsertTag.java:898)
at org.apache.struts.taglib.tiles.InsertTag.doEndTag(InsertTag.java:462)
at jsp_servlet._layout.__appdashboardlayout._jsp__tag7(__appdashboardlayout.java:470)
at jsp_servlet._layout.__appdashboardlayout._jsp__tag6(__appdashboardlayout.java:409)
at jsp_servlet._layout.__appdashboardlayout._jspService(__appdashboardlayout.java:205)
Truncated. see log file for complete stacktrace

I received the following Cisco Secure Desktop error when trying to

I received the following Cisco Secure Desktop error when trying to use WebVpn. "Access Denied Your system failed to be validated by the Cisco Secure Desktop and will not be granted access. Critical failure. Cisco Secure Desktop must run and validate your system. When I go verify Safari settings under "Weblaunch Platform detection, sun Java and Java Detection are all clicked. I even change the DNS in safari system preferences, to no avail.
My system is MacBook Pro 2.8 GHz Intel core i7 with 16 GB 1600 MHz DDR3.
Thanks.

Sorry I don't really understand.... there are no partitions on the drive. How do I repartition it?
And should I use "erasing free space" or "erase" for wiping clean my drive of everything? Erase seems to be faster last tiem I tried.
Thanks!

I am getting an activation error when trying to sign in to FAceTime

I am getting an activation error when trying to sign in to FAceTime

me too after upgrading into lion..

Odd error when trying to repartition internal SSD

Similar Messages

Maybe you are looking for