Odd incompatibility between 10g2 for windows 32-bit and Linux 64-bit
Hi.
When we run the following SQL under windows, it works as expected.
drop table TRANS;
drop table TRANS_PAT_LEVEL;
drop table TRANS_DAY_LEVEL;
create table TEST1.TRANS (ID NUMBER(22), QTYDISPENSED NUMBER(22), TRANSACTIONDATEDIFF NUMBER(22),FMYPRODUCT NUMBER(22));
create table TEST1.TRANS_PAT_LEVEL (ID NUMBER(22), FMYPRODUCT NUMBER(22), LASTMYPRODUCTUSE NUMBER(22),ELIGIBLERET NUMBER(22));
create table TEST1.TRANS_DAY_LEVEL (DAYID NUMBER(22) not null, UNITS NUMBER(22));
UPDATE TRANS_DAY_LEVEL SET UNITS =((SELECT SUM(QTYDISPENSED) FROM (SELECT T.QTYDISPENSED, T.TRANSACTIONDATEDIFF DIFF FROM TRANS T, TRANS_PAT_LEVEL TPL WHERE T.FMYPRODUCT=1 AND T.ID = TPL.ID AND TPL.ELIGIBLERET = 1 AND LASTMYPRODUCTUSE>=DAYID ) WHERE DIFF = TRANS_DAY_LEVEL.DAYID)) WHERE DAYID>=0 AND DAYID<=365;
But when we run it under Linux (Redhat 4.3 x86_64) , we see the following error with the last command:
SQL> UPDATE TRANS_DAY_LEVEL SET UNITS =((SELECT SUM(QTYDISPENSED) FROM (SELECT T.QTYDISPENSED, T.TRANSACTIONDATEDIFF DIFF FROM TRANS T, TRANS_PAT_LEVEL TPL WHERE T.FMYPRODUCT=1 AND T.ID = TPL.ID AND TPL.ELIGIBLERET = 1 AND LASTMYPRODUCTUSE>=DAYID ) WHERE DIFF = TRANS_DAY_LEVEL.DAYID)) WHERE DAYID>=0 AND DAYID<=365
ERROR at line 1:
ORA-00904: "DAYID": invalid identifier
We have also seen an incompatibility regarding case sensitive column names being created by the JDBC under linux, where under windows the same tables all have case-insensitive column names.
Any help here?
Hi,
exception is expected behavior since inline views [can not be correlated|http://forums.oracle.com/forums/thread.jspa?messageID=3403285�] in Oracle (yet). Successful execution of such query means a bug in that Oracle release.
Similar Messages
-
Oracle 9.2.0.2 for Windows XP 32 and Solaris 64 bit
When will a version of 9.2.0.2 be available for Solaris and Windows XP Pro 32bit? I only see Windows XP 64 bit for this version.
I have some software that uses the oracle database and it seems to require 9.2.0.2.
Thanks!Download 9.2.0.1, and then the 9.2.0.2 patch from Metalink.
Alison -
Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?
Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?
I have a customer having a world of issues getting the agent to start.
Jeff CourtadeNo. 64bit support is not there for 2.1 agents on Windows.
-Subba -
Is there a 32 Bit edition available for windows server 2012 and windows server 2008
Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
AhmedHi,
Quote:
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
USB Controller Driver (3.0) for Windows Server 2008 Standard Edition 32-bit
Hi,
I have recently built a HP DL320e Gen8 v2 server with Windows Server 2008 Standard Edition 32-bit & it's missing the USB Controller Driver which HP don't have. I have searched endlessly online without success. HP suggest I try Windows but I couldn't
find it in the Download Center either.
Can somebody please provide me with the USB Controller Driver for Windows Server 2008 Standard Edition 32-bit?
Regards
NazHi,
Thanks for your posting.
For this issue, i think you need to search in the HP official website or contact the HP support.
Regards.
Vivian Wang -
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in allHi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Hi Friends,
Please confirm wheteher Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 Server is supported on
Windows (64 bit) and Linux x86 (64 bit)
Because from edelivery.oracle.com i could see the downloads only for windows and Linux and not specified as 32/64 - bit
so will it mean that the same dump is used for both 32 and 64 bit
1) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Microsoft Windows (V16377-01)
can the above dump is used for both 32 and 64 bit windows?
2) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Linux x86 (V16378-01)
can the above dump is used for both 32 and 64 bit Linux?
The reason is because for OBIA 7.9.6.3 configuration both the Informatica Power Centre and DAC Server should co-exist
and i could see seperate installer for 32 and 64 bit for both Windows and Linux whereas i couldn't see it for DAC Server
Please confirm .
Regards,
DBIt is supported on both platforms. With Linux however, if you have any issues you can to install in a windows environment, then copy over the folder structure. Also, you can possibly run into issues running the setup.exe on 64bit windows. When you open the install directory, go to dac/disk1/install and run the executable for win32. win64bit can return an error where it says it cannot create certain temp directories. It is a known java bug you can find in the support website.
Edited by: user12838563 on Jul 13, 2011 11:35 PM -
Jabber for Windows 9.1 and WebEx Voicemail Tab
Guys
we are using both Jabber for Windows (9.1) and WebEx connect clients. both connect to WebEx cloud services. when we use WebEx connect we have all features including voicemail but when we use Jabber for Windows there isnt any voicemail option at all present.
both are doing phone integration and everything else is working fine.
Now when we do the same for our andriod tablets we have the option for voicemail.
i understand that there are several feature differences but based on the searches ive been doing, voicemail should be present and i havent actually seen anyone having this problem. Note, this is using WebEx not CUPS.
i know im probably missing something completely here.
thanks againDo these users all have a conferencing profile assigned to them in CUCM (9.0) or CUPS (8.x)?
Regards,
Erik
Sent from Cisco Technical Support iPad App -
Cisco Jabber for Windows in Extend and Connect mode and making outbound calls
Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks. -
SCM update for Windows 8.1 and Windows 2012 R2
Hi,
When are we likely to get an update to SCM for Windows 8.1 and Windows 2012 R2?Hi
you must add these lines in ZTIGpoPack.wsf (for MDT) and LocalGPO.wsf (for LocalGPO), and for MDT 2013, copy ZTIGpopack to Deploymentshrare\Scripts
sOSVersion = oEnvironment.Item("OSCurrentVersion")
If (Left(sOSVersion,3) = "6.3") and oEnvironment.Item("IsServerOS") then
sOS = "WS2012R2"
oLogging.CreateEntry "Using Windows Server 2012 R2 GPO Pack", LogTypeInfo
ElseIf (Left(sOSVersion,3) = "6.3") and Not(oEnvironment.Item("IsServerOS")) then
sOS = "Win81"
oLogging.CreateEntry "Using Windows 8.1 GPO Pack", LogTypeInfo
Regards
Thanks for this, but you also need to update the GPOPack.wsf in (each relevant) template folder of the Deployment Share like this:
If(Left(strOpVer,3) = "6.3") and (strProductType <> "1") then
strOS = "WS12R2"
ElseIf(Left(strOpVer,3) = "6.3") and (strProductType = "1") then
strOS = "Win81"
ElseIf(Left(strOpVer,3) = "6.2") and (strProductType <> "1") then
strOS = "WS12"
ElseIf(Left(strOpVer,3) = "6.2") and (strProductType = "1") then
strOS = "Win8"
As ZTIApplyGPOPack calls GPOPack.wsf.
(Which is what I think Scorpio92 probably meant when you said to edit LocalGPO.wsf...) -
ITunes 11.0.4 for Windows keeps restarting and removing my set-up and preferences
iTunes 11.0.4 for Windows keeps restarting and removing my set-up and preferences every time its shut down and re-opened, how can I stop this?
All of the music (etc) is still there but I need to agree to the terms and condition of the 'Software License Agreement for iTunes for Windows' every time I open iTunes.
Once opened there is no personal set-up, such as side menus and how the lists are set-up (e.g showing album images, music listed in ‘most played’ order,etc etc) I know how to re-do all of my settings, Its just getting very annoying now.
Anyone know how to stop this or at least why It is doing it?I found why it defaults back to the wizard. I noticed in C:/users/(User)/AppData/Roaming/Apple Computer/iTunes/iTunesPerfs.xml file is deleted from this directory upon exiting iTunes. When I manully restore this file itunes starts with my correct settings. Why the .xml file being deleted I don't know. iTunes is deleting the file when you exit so I guess there is just a bug.
-
I brought Quicktime 7 Pro for Windows 7 Pro and it did not electronically download or I can't find it anywhere on my computer. Need help
Apple - QuickTime - Download
Download and install the free version and apply your key to unlock the Pro features. -
Known Issues for Windows 10 SDK and Tools
Please read about Known Issues for Windows 10 developers in the Known Issues for Windows 10 SDK and Tools
forumTo fix this issue, your computer must be connected to the internet to download these components.
Make sure your computer is connected to the internet.
Open Control Panel, and select Programs and Features.
Select Microsoft Visual Studio 2015 RC, click Change, and then click
Modify.
Select the feature “Universal Windows App Development Tools”, and click
Update. -
Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite LC2400 [switching transformer].
The Mac Pro will not power on when connected to the Tripp Lite LC2400. The Power Supply makes continuous clicking noises and repeatedly resets the Mac Pro every 3 seconds.
The same Mac Pro connected to an outlet with no Tripp Lite starts up with no problem.Hi,
I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
- restart does not work
- errors during boot:
[ 2.399277] pnp 00:0b: [irq 23]
[ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
[ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
Issued solved:
- in order to make nvidia graphics working you have to disable Optimius in BIOS.
- Battery not recognized -- fixed after recend updates
- grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1 -- works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
- in order to make the touchpad work properly install psmouse-elantech from AUR
update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
Last edited by knue (2012-03-06 23:26:26) -
How could i download drivers for imac mc814 for windows 7 ? and from where ?
how could i download drivers for imac mc814 for windows 7 ? and from where ?
If you are trying to run MS Windows in Boot Camp then please post in the correct forum, the Boot Camp forum. That is where the Windows guys hang out.
Maybe you are looking for
-
Hello, while looking for text in a Mail message by doing Command-F the found text is highlighted in a faint grey box. Is there a way to change the box color to make it easier to find on the page? Thanks!
-
Cannot booklet print in duplex mode. Prints second and third side of page upside down and page 4 as original page. Does't worlin any mode, even booklet mode. Had a HP5400 previously, which did booklet printing just fine. Can the driver from the
-
How to call Pro*C in PL/SQL code ?
Hi, I have a requirement to call Pro*C code in PL/SQL code. Can somebody help me on this It would be better If you can give me sample code. Thank You, Seran
-
How to find out what carrier is blackberry 8330 locked to?
Hello, I've got a bunch of BB 8330's. Some of them have carrier logos, so I know which carrier they are from. But others have no logos, so I assumed they were unlocked. If I go to Options -> Advanced Options, there is no choice Sim Card, so I can't c
-
Unable to convert the sender service CSAT_SendPeriodicInventoryBalances to
Hi Experts, Right now I am facing a big problem "Unable to convert the sender service CSAT_SendPeriodicInventoryBalances to an ALE logical system". The same thing is working in our production system, and right now we have done client copy of the prod