Odd link to thread in email notification

I didn't see a section for the forum software itself, so I'll post this here.
I just got notification of a response to a question I asked. The email had two links:
1. Mark it as solved
2. This doesn't solve my problem
I find both of these odd and very non-standard. Most discussion forums provide a general link to the thread. On the forum, there are settings to mark it solved, if it is. I found this confusing.
At the very least, I suggest changing the text of the second link to something like: "View this thread".

Only at a certain size, any higher your directed to view the case in the admin which has the file.
As a not I say often to people about workflows etc - These emails are as their named - Notifications. They are not intended to be the means you run an online business and just emails is something for a BC site not to rely on. They have limited information and scope and everything and more is within the admin and the depths of the CRM in a browser that can run dynamic and rich content information.

Similar Messages

Error in URL link for approvers in email notifications - GRC 10

Hi All,
After scheduling the PC - CCM jobs , all the approvers got the email notfication with the link to work inbox.
when approvers clicked work inbox , they are getting error message.
Kindly help on getting the steps to check for areas we need make sure , why link is not working and how to solve.
And what is the reason for this error?
Service cannot be reached
What has happened?
URL call was terminated because the corresponding service is not available.
Note
The termination occurred in system with error code 404 and for the reason Not found.
What can I do?
Please select a valid URL.
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Regards
Prasanna S

Hello,
Activate the relevant services in t code SICF
check the below Note for technical process
2145019 - Error - Service Cannot be reached
1697673 - GRC 10.0 - Service cannot be reached
Also check the below thread for similar issue
SICF service - error code 404
Regards
Baithi

How to remove 'Please click here to Respond' link in email notification?

Hi All,
The links in the workflow email notification that goes to timecard approvers when a timecard has been submitted.
It is causing a lot of confusion to the customer, so we would like the "Please click here to Respond" and "Click here to view attachment" be removed.
The "Please click here to Respond" is causing more problems but it would be great if both could be removed?
Can any one please tell me how to remove the above links in wokflow email notification?
it's urgent. Thanks in advance.
Thanks,
Prasad Raju

Hi Prasad,
I need similar kind of requirment,did you get any resolution for this ISSUE???
Thanks
srinivas.L

SOA 11.1.1.3 Removing footer link from Email notification

Hi,
I need to remove the "Please access the task in the Workspace Application" link in the SOA email notifications.
I dint find any options to remove this link (checked in email notifications advanced options).
Any pointers on how to remove this link.
Regards
Vicky

vicky wrote:
Hi,
Thanks a lot. This is the one I am looking for.
vickyBuy me a coffee when you meet me the next time! :-P
Glad that it helped!

Email notifications revisited

Earlier I started a thread on email notifications of posts, asking if maybe we could have restored the previous feature where the notification included some of the text of the new posting. Now I have recieved an email notification of a posting on my shiny new thread! All excited, I clicked on the link, the browser brought up the thread (SOME things are still working) - but there was no new posting on it. I thought maybe I might have to log in to see it, so logged in, and of course the new "feature" kicked in that brings you to the discussions home instead of the thread you were looking at, but even when I navigated back to it I couldn't find Lennart Thelander's post, and of course the notification (pasted below) didn't give me the contents of the post, which was what I was complaining about in the first place.
So moderators (you must really be sick of the whole thing at this stage) that is TWO bug complaints and ONE feature restoration request in the one post. Sorry if it is a bit rambling and confused, but I am feeling a bit rambling and confused!
You are watching the thread "Email notification", which was updated Nov 16, 2005 5:14:14 AM by Lennart Thelander.
To view the thread, visit:
http://discussions.apple.com/thread.jspa?forumID=1076&threadID=233520

It seems that there are some 'ghost' (spoooky!) email notifications and New Post notifications that occur when no actual new posts have been made.
I've been reporting this here:
Email alerts to messages that are not new
and here:
Ghost "new posts" appear according to My Subscriptions
We've all been clamouring for the return of Online Subscriptions, but the closest that we have to it at the moment are the blue-ball notifications on the My Subscriptions page.
Email notifications have also been changed to direct users to the actual post itself. For example, one of my notifications reads:
"You have requested mail to be sent to you when messages to the Apple Discussions
topic "Run Chkdsk Utility Messages on brand new 60gb Video iPod & other errors
" are posted. Kiwi_Bloke posted "Run Chkdsk Utility Messages on brand new
60gb Video iPod & other errors " on Dec 5, 2005 6:08:49 AM.
To view the topic, visit:
http://discussions.apple.com/thread.jspa?messageID=1280252#1280252
To view the forum, visit:
http://discussions.apple.com/forum.jspa?forumID=807"
We requested a change to the email notifications system here:
Email subscriptions do not take you to the new post correctly and it was improved soon afterwards to the format you see nowadays. There's also a whole blurb on guidelines of posting/replying included in the email notification...
Kind regards,
Gopha.

Schedular Job Email Notification

I have used the directions from the following link to set up email notifications. When I execute the job I don't receive any email? I have setup the email in OEM under Setup => Notification Methods and tested it successfully. I've also setup my email address in OEM under preferences and tested successfully as well. What am I missing?
I've determined that it's privileges, as I've set the exact same thing up under a sys admin user and it works fine. What privileges do I need?
Thanks,
Mark

I entry in the dba_subscr_registrations;
SUBSCRIPTION_NAME is "SYS".SCHEDULER$_EVENT_QUEUE":SCHED$_AGT$99;
Do you need other fields?
40 entries in the sys.AQ$SCHEDULER$_EVENT_QTAB and I am not able to cut and paste due to work restrictions, but here are a few of the lines.
AQ$SCHEDULER$_EVENT_QTAB_E EXPIRED        27-MAR-14 16.57.06 SYS     (null) SYS JOB_SUCCEEDED WL MISS_P_PROC 27-MAR-14 04.57.06
AQ$SCHEDULER$_EVENT_QTAB_E EXPIRED        27-MAR-14 16.52.57 SYS     (null) SYS JOB_SUCCEEDED WL MISS_P_PROC 27-MAR-14 04.52.57
AQ$SCHEDULER$_EVENT_QTAB_E UNDELIVERABLE 27-MAR-14 16.50.09 SYS     (null) SYS JOB_SUCCEEDED WL MISS_P_PROC 27-MAR-14 04.50.09
AQ$SCHEDULER$_EVENT_QTAB_E UNDELIVERABLE 27-MAR-14 16.48.00 (null) (null) SYS JOB_STARTED    WL MISS_P_PROC 27-MAR-14 04.48.00
AQ$SCHEDULER$_EVENT_QTAB_E UNDELIVERABLE 27-MAR-14 16.35.06 SYS     (null) SYS JOB_SUCCEEDED WL MISS_P_PROC 27-MAR-14 04.35.06
AQ$SCHEDULER$_EVENT_QTAB_E UNDELIVERABLE 27-MAR-14 16.33.00 (null) (null) SYS JOB_STARTED    WL MISS_P_PROC 27-MAR-14 04.33.00
AQ$SCHEDULER$_EVENT_QTAB_E UNDELIVERABLE 27-MAR-14 16.27.06 SYS     (null) SYS JOB_SUCCEEDED WL MISS_P_PROC 27-MAR-14 04.35.27
AQ$SCHEDULER$_EVENT_QTAB_E UNDELIVERABLE 27-MAR-14 16.23.44 SYS     (null) SYS JOB_FAILED     WL MISS_P_PROC 27-MAR-14 04.23.44

Email Notification: WorkItem - Unable to open Access Request

Hi,
I am using AC 10.1 with SP06
I have configured Email-notification for the new workitem to approve or reject and this is working completely fine. The approver is getting the mails triggered with the link to goto WorkInbox. All the requests are clearly visible but I (or any approver for that matter) can't open/access the request.
I had copied the URL link by opening the workinbox and then with right click --> Technical help and pasted the same link in the email subject content. Hope this is the right way to provide the link to work-inbox
But I can access/open the same request, if I go via the normal procedures SAPGUI --> NWBC --> MyHome --> Workinbox
Ofcourse, I would've missed some things but not sure what it is.
I have followed http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/605077fc-3577-2e10-e1a6-a743514d4eb3?QuickLink=index&… to come so far.
I assue the issue (not sure though) might be with the package, where I saved the email document, While creating the new email template at the time of saving it, I created one custom package ZGRC, as you can see there are some of the package encapsulation which are not captured. Is this causing the issue?
Awaiting for you quick and positive response.
Thanks,
Ameet

Hi Alessandro,
I have mentioned the URL link under %PATH% as below:
You mean SSO to NWBC..?
This is not in place till now. But how come this could be the issue..? I understand that SSO will take approver directly to the workinbox link
I have saved my log-in credentials with Chrome browser so whenever i click on the link coming from the email notification, the browser doesn't ask me to enter ID, password and takes me to my workinbox items wherer i can see the requests pending for my approvals.
But if i use the same link on IE, it asks me to enter credentials, as I didn't save the ID and password So, after providing the credentials, I can see the requests pending for my approval, but UNABLE to open/access any of the requests.
I have activated all the required services as well.
Ameet
Message was edited by: Ameet kumar

Email Notification without using standard Process

Hi ALL,
I need to send an Alert for the user with message ' TEST PROCESS CHAIN' is successfullly completed, no need of detail process which is below message
Job started Step 001 started (program RSPROCESS, variant &0000000021258, user ID ECCREMOTE) Start process ABAP ZSTART_TEST in run 4O3F3OZCSANBDAQK25O84QXOT of chain ZTEST_PC Start program RSAN_PROCESS_EXECUTE with program variant ZTEST_PC Spool request (number 0000016968) created without immediate output Processing completed successfully for analysis process ZTEST_PC Entire chain now has status 'G'
Thanks,
Naresh

Hi naresh,
u can also follow the below step as well to acheive the same :
1 Go To RSPC Transaction
2 Select your process chain
3 Right click on the process and choose create message a window popsup.
4 Choose the message you want like either success or errors
5 In the next screen create the process variant.
6 In the process maintance: send message screen select maintain recipient list
7 Enter recipient and recipient type
8 Come back to send message screen and save it ( You don't have option in the previous screen to save)
9. Do this for all the processes and save it and schedule for testing.
Check the below thread :
Sending Email notification via process chain...
Thanks,
Deepak
Edited by: Deepak Machal on Dec 7, 2011 8:49 AM

Auto-included link to list item not working in Workflow or email notification

I made a workflow straight from my SharePoint site--NOT from SharePoint Designer. (My computer is still running on Windows XP, so I can't download Designer until my boss upgrades me to a newer system.) When creating the workflow, you have the option to include
a link to the list item by clicking a checkbox. The links don't work in either the email notification or in the workflow properties. Extra characters are being added for some weird reason. (For example, the correct link looks like "https://www.w14b.comcast.net/sites/<yada
yada>.docx" and the links in the workflow and email look like "http://www.w14spw-po-b1.com/sites/<yada yada>.docx") I see no place to edit the URL. How do I fix the links???

Hi,
Please check if the http://www.w14spw-po-b1.com/sites/ is the url of default zone of the web application where this site resides.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/d17ad498-0b6f-4b12-9885-b8057fa04d88/sharepoint-2010-workflow-inserting-link-to-list-item?forum=sharepointgeneralprevious
In addition, Windows XP SP3 is supported for SharePoint designer 2010:
http://www.microsoft.com/en-in/download/details.aspx?id=16573
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Email Notification Threading

I use Thunderbird, and I was wondering if there was any way to have email notifications sorted into threads. It's really hard to follow conversations through email, since without threads they're divorced of context.
If there's no way to get email threading working, are there any plans to implement this feature in the future?

That's news to me! we've been dealing with this since the switch from the old system to the Jive system. I figure it was something you just had to deal with. There are other forum softwares that works similar even have items to identify which for and the don't have a problem with this.
From Now on I'll just say its a bug they are working on.
Just read your link they say properly fixed in 4.0.0
Yet we are still using 2.5.16.
Not much a Priorty if we are almost 1.5 versions behind.

Forum email notification link lead to a redirect

Hi all,
we used WPC to establishing wikis and forums in order to easily share and contribute knowledge and information in our Netweaver Portal.
Well, everything works fine except for the email notification sent to the end user. By clicking the link provided in the e-mail the user can see the thread content related but after just a few seconds the web page redirects to the portal home page...
Any help would be appreciated.
Thanks in advance

Hello Anju,
i use Outlook 2010 (beta) without problems. All mails from apex show me the links.
I think you must change your outlook-Settings (i.e. security).
Carsten

Is there a way to attach files linked in FormCentral form to email notifications?

As part of my FormCentral form design, the end User is required to link a file (copy of Purchase Order). Is there a way of forcing this file to attach to the email notifications? I can obviously see the file attachments in the backend and download from there, but it would be preferable if I could deliver with the email notification to circumvent other processes.
Any suggetsions?

Sorry this is not possible to have the files attached to the email notification.
Gen

SRM 7.0 OFFLINEAPPROVALSEND - static link in Email notification possible

Hello SRM Gurus,
i have a special question regarding OFFLINEAPPROVALSEND and the link in the Email notification. Is it possible to customize table /SAPSRM/C_PORT_C to provide a static link to the SRM Portal and not use the logic to generate this link.
Background: We have a Federal Network Portal in use for HR and BI. But we are planning now to change the concept to a central portal. So we do the Upgrade to SRM 7.0 with a stand alone Portal but we are getting the SSO Ticket from the Producer Portal over a special static link (e.g. http://producer.portal.net:50000/E_SSO?to=https://srm.portal.net:50201/startsrmportal.
For a interims solution i would provide in the offline Emails a static link to go to the SRM Portal with the SSO ticket from the producer portal. I know that is no standard way for the moment, but we need that to provide SSO to the Managers for there approvals. At the moment they get an Login Page with Username and Password. An that is not acceptable for the Managers
My question is now, could i provide a static link in the offline Emails and override the generated link. Or must i do a modification of the OFFLINEAPPROVALSEND Report? We only need this interims solution for 4 month until the new central portal is ready so that we can move with SRM in. A quick solution would be nice.
Thanks for every usefull suggestion in advance.
Best regards
Stefan

Hi Masa,
   Thanks for your input. I maintained the below entries but still it is not working. creator is not still receiving approved Email once the shopping cart is fully approved.
1 .SPRO-SAP Supplier Relationship Management-SRM Server-Cross Application Basic Settings-Define Transaction Types -
    BUS2121 - SHC - Event Schema as SC.
2. I enabled all four check boxes in this path Define Recipient of Notifications - approve shopping cart - contact person ( in most
    cases, the creator of the document ) .
But I don't know how to maintain or what to maintain for Define Event Schema. This will be highly appreciate if you share your great experience on this..
Hi Masa,
   I got approved Email after 10 mins. I don't know is this how the standard email send to requestor any idea how to change this? I found the Standard task that mail is sending
Document 1000001212 approved
WF-BATCH
to:
XXXXXXX
08/12/2009 03:35 PM
Show Details
Document 1000001212 approved
The document 1000001212 of type BUS2121 was approved.
Technical information:
Event:#APPROVAL_PROCESS_DOC_APPROVED
SubCat:#APPROVAL_RESULT_NOTIFIC_NEW
The following messages have been triggered by the system:
You can view the document directly. Choose the following link :
Login
   I am facing another issue that the Email is having a PORTAL link (Login text above is basically a link), when i click and after login into portal a pop up is displayed 'The specified transaction mode is not allowed with respect to workflow status of current document'. any idea about this issue?
John

Hide related application region/link in email notifications

Hi,
Any pointers to hide related applications region/links in email notifications?
Thanks upfront for the help!!

Hello,
Please see:
How To Remove The Notification Details Attachment From Html Notifications (Doc ID 273518.1)
Thank you,
Deborah Bourgeois
Oracle Customer Support

OIM 11g - Email Notification with direct link to Approval Task Details

Hi,
We wanted to send email notifications to approver with direct link to the approval task details screen from which the user can either approve or reject the request. In OIM 11g OOTB Notification templates such as Request Creation contains the direct link to Request Detail screen which is something like
http://localhost:14000/oim/faces/pages/Self.jspx?OP_TYPE=LOOKUP;E_TYPE=MY_REQUEST&T_ID=65
Wondering if there is something similar for Approval Task Details screen as well.
Any kind of help or suggestion is greatly appreciated.
Thanks,
Deepa

If at all you cannot get the direct link for approve/reject then try the actionable email from SOA. Once you have that configured the emails gets approver/reject links so that approvers can directly approve/reject the task from email. If that works for you then you can look at the format of those links in the email and deduce what you need the url as.
HTH,
BB

Odd link to thread in email notification

Similar Messages

Maybe you are looking for