ODI : how to raise cross reference error before loading into Essbase?

Hi John .. if you read my post, I want to say that you impress me! really, thank for your blog.
Today, my problem is :
- I received a bad quality data file from ERP extract
- I have cross reference table (Source ==> Target)
- >> How to raise the error before loading into Essbase !
My Idea is the following, (first of all, I'm not sure if it is a good one, and also I meet issue to do it in ODI !)
- Step 1 : make JOIN between data.txt and cross-reference Table ==> Create a table DATA_STEP1 in the ODISTAGING schema (the columns of DATA_STEP1 are the addition of columns of data.txt those of cross-references Tables (... there is more than 20 columns in my case)
- Step 2 : Control if there is no NULL value in the Target Column (NULL means that the data.txt file contains value that are not defined in my cross reference Table) by using Filter ( Filter = Target_Account IS NULL or Target_Entity IS NULL or ...)
The result of this interface is send to reject.txt file - if reject.txt file is not empty then a mail is sent to the administrator
- Step 3 : make the opposite : Filter NOT (Target_Account IS NULL or Target_Entity IS NULL ... ) ==> the result is sent in DATA_STEP3 Table
- Step 4 : run properly the mapping : source : DATA_STEP3 (the clean and verified data !) with cross reference Tables and send data into Essbase - NORMALY, there is not rejected record !
My main problem is : what is the right IKM to send data into the DATA_STEP1, or DATA_STEP3 Table, which are Oracle Table in my ODISTAGING Schema ! I thy with IKM Oracle Incremental Update but I get error, and actually I don't need an update (which is time consumming), I just need an INSERT !
I'm just lookiing for an 'IKM SQL to Oracle" ....
regards
xavier

Thanks john : very speed !
I understood better now which IKM is useful.
I found other information about the error followup with ODI : http://blogs.oracle.com/dataintegration/2009/10/did_you_know_that_odi_generate.html
and I decided to activate Integrity Constorl in ODI :
I load :
- data.txt in ODITEMP.T_DATA
- transco_account.csv in ODITEMP.T_TRANSCO_ACCOUNT
- transco_entity.csv in ODITEMP.T_TRANSCO_ENTITY
- and so on ...
- Moreover I create integrity constraints between T_DATA and T_TRANSCO_ACCOUNT and T_TRANSCO_ENTITY ... so I expected that ODI will raise for me in E$_DATA (the error table) the bad records !
However I have one issue when loading data.txt into T_DATA because I have no ID or Primary Key ... I read in a training book that I could use a SEQUENCE ... I try but unsuccessful ... :-(
Is there another simple way to create a Primary Key automaticaly (T_DATA is in an oracle Schema of course) ?thanks in advance

Similar Messages

How to Integrate Oracle Ebusiness suite to FDQM to load into Essbase

Hi Experts,
I need a document regarding how to integrate Oracle EBS to FDQM.I am taking target as Essbase.I know how to integrate to HFM and loading the data to HFM.So please share me the document like How to get source file from E-Buisiness suite to load into Essbase.Pleaae share with an example
Thanks in advance

Hi;
How to install Oracle Ebusiness suite R12.1.3 on RAC environmentsCheck below thread's mention note advice
Rrac-EBS wiht asm
Re: RAC for EBS R12
rac-r12-ebs-asm
Re: EBS R12 with RAC and ASM on AIX 5.3
RAC-R11-R12
Upgrade the 11.5.10.2 Instance with 10gRAC setup
How to implement shared appl top Shared appltop in R12
Shared appltop in R12
How to configure https for Oracle Ebusiness Suite R12.1.3Enabling SSL in Release 12 [ID 376700.1]
Enabling SSL with Oracle Application Server 10g and the E-Business Suite [ID 340178.1]
Also see*Steven Chan's blog entery*:
http://blogs.oracle.com/stevenChan/2009/08/ssl_advanced_configuration_wizard_ebs12.html
Regard
Helios

Unresolved cross-references error in FM 10, but same ref-s working in PDF

Hi everyone,
I've come across an issue I can't fix: when opening an .fm file in FrameMaker I get an error message saying the document has unresolved cross-references. The Find/Change check also shows that all cross-references in the file are broken, but from the Cross-references pod I can jump to the right marker by clicking Go to source.
At the same time when I choose to save the book as PDF, these same references in the resulting PDF work just fine: they are clickable and lead exactly to the right location. The .book and the .fm files are all stored locally, so no networking or sharing involved. Markers added automatically, source type for references is Paragraph.
Could you please help me figure out how to fix the links that seem to be working just fine?
Thanks,
Svetlana.

> What is a MIF wash and how would you do that?
Maker Interchange Format (human-readable FM document markup).
In FM10 & later, I think it's a pulldown menu item, but what it does is:
save all files as .mif in MIF[latest] format, including the .book
(if by hand, save in place to .fm and .book to make this easier)
close all files
open the ( MIF ) files
If you do it manually, to .mif file names, be sure to open the body.mif files first, and resave them as .fm before opening the book.mif file.
This process at least flags, and may fix or correct any data structures that aren't valid MIF.

How to find cross references

Hi,
I try to delete an old project in ODI, but I get the following error message:
ObjectVariable : CTL_MAX_SESSION is referenced by: Txt CrossRef : 31612011, Txt CrossRef : 31636011, Txt CrossRef : 31643011, Txt CrossRef : 31645011, Txt CrossRef : 31649011, Txt CrossRef : 31651011, Txt CrossRef : 32852011, Txt CrossRef : 32876011, Txt CrossRef : 32883011, Txt CrossRef : 32885011, Txt CrossRef : 32889011, Txt CrossRef : 32891011
Cannot remove
For me it looks like that am accidentially using the ODI variable CTL_MAX_SESSION of this project in other ODI projects.
But I don't know where and the CrossRefs in the error message are not very helpful...
Does anybody know how to find the corresponding objects to such cross references in error messages?
Thanks in advance!
Cheers,
Helmut

Did you try to expand "Used in" beneath the variable name?
If it's empty, you'll have to dig in the work repository tables. Start with SNP_TXT_CROSSR, SNP_STEP.

How do I cross-reference photo folders?

My photos are organized in folders according to the week they were taken, and I want to keep it that way. But if I want to pull up just the photos that have my friend Brian in them, how can I do that?
First off iPhoto is NOT an option. I have used several versions of the iLife suite starting with Tiger, then moving on to Leopard and (currently) Snow Leopard. And the whole iLife suite is riddled with bugs to the point where I do not want to touch them as they are completely unreliable. DVD player crashes and freezes randomly, and falsely claims DVDs are damaged when they are brand new. Now I just use VLC, and my DVD movies play perfectly every time. Something I could almost never get DVD Player to do. I have tried using iWeb, but after a few "undos" and some editing, my links no longer work, and files get dropped for no reason.
I have tried tagging photos in iPhoto, and using one Smart Folder for each tagged category. It all works great for a while, but before long, newly tagged photos stop being added into the Smart Folders, and it defeats the whole purpose.
Not to mention that iPhoto creates a huge file, and wastes time identifying faces, which is an undesirable feature I can't seem to turn off.
I am guessing the whole problem with the iLife suit is that the library coding gets super easily corrupted if you make changes (and I am not even touching any of the files outside of iPhoto, iWeb, etc.)
I can't even make aliases to the folders and organize them that way for viewing in screensaver, because Snow Leopard's screen saver can't open the photos in an alias folder.
I'm NOT going to duplicate all my folders with different names and arrange them by category. That isn't organizing, that is duplicating, and completely wasting tons of file space.
Is there any program available I can get to replace iPhoto so I can cross-reference my photos into multiple categories? And is there a screen saver program I can use to make my own screen savers that can pull files from aliases, or some other referencing system?
Is there a patch I can get so that the default screensaver will open photos from an alias in Snow Leopard, the way it always used to? Why is it so difficult to deal with what should be simple, basic programs and file organization?
I love my MacBook Pro with Snow Leopard, and I love the professional programs I run on it such as Adobe and Maya, but why is the first party software complete garbage?
I know I don't sound like it at the moment, but I'm normally a polite person, I am just really frustrated right now. Just tired of banging my head trying to find ways to get around and outsmart the default programs on this OS, which has been futile, I might add.

I am so terribly glad you haven't come across the bugs I have because let me tell you they are terribly frustrating. I only wish I had made them up. There is nothing I like better than ranting without any justification whatsoever.
Okay enough of that. I really have come across these problems, and even though I may not have been too polite I don't need to be accused of falsification and stupidity thankyouverymuch.
If you had read my post you would have understood that choosing a folder is one of the many things I have tried to do that didn't work. The only folders that work have the actual files in them. And since I am trying to organize my photos into groups it does not make sense to duplicate folders of photos simply to make them work. That takes up too much space.
Instead what I am trying to do is to not duplicate anything, but find a way to have my photos organized into groups.
Further if iLife has not presented any problems for you, you must be a very casual user indeed. These programs do not provide the depth of use that advanced users like myself require. You can go back to selling shoddy products for Apple now.
Is it possible for people to respond with HELP instead of criticism?

Cross-references error

HI everyone,
I have a book file with about 20 chapters. These chapters all have a large number of cross-references in them that link from chapter to chapter. Since I now have to revise last year's 2010 edition of the book, I went through and changed the name of each chapter file by updating 2010 to 2011 in the chapter name. Now when I open a chapter, the cross references that reference text in other chapters all have a question mark icon next them and if I try to double click it I get the following error:
"Hyperlink destination document not found. Please verify the documents location in the hyperlinks panel before choosing this hyperlink"
This doesn't mean that I have to manually go through and relink the cross-references to the newly named chapters does it? This would take ages and it doesn't make sense that I would have to do this simply because I changed a file name. Is there a quicker way to solve this problem?
Really appreciate any advice offered.

Thanks for the reply,
Yeah I could change them back but I need the file names to be different - it's a 2011 version now, not a 2010 version. Is there no other workaround that keeps the file names intact?

[AS] How to make cross reference at insertion point

Hi,
I have a book ("indb") including several documents with several "anchors"
(german translation: "Textanker") where cross references from different documents are linked to.
What I already got is to reference all anchors and collect them in a list.
Now I would like to make a new cross reference at the insertion point
in a text frame of the active document - can't get it to run :-(
Is anybody out there who can post a AS-sample doing this?
Thanks in advance!
Here is the reference to an already existing anchor:
{hyperlink text destination id 44155 of document "kapitel 2.indd" of application "Adobe InDesign CS4"}
The code I tried to make a new cross reference looks like this - but of course doesn't work:
tell application "Adobe InDesign CS4"
tell active document
make new hyperlink with properties {name:"new hyperlink", destination:hyperlink text destination id 44155 of document "kapitel 2.indd"}
end tell
end tell

Thanks a lot - got it now!
Maybe it could be helpful for others to look at your answer
with the placeholders replaced by "real" strings as it was hard for me
to figure out the right form:
tell document 1
set theDest to make hyperlink text destination with properties {name:"Some name", destination text:<a reference to the relevant text>}
this line for example looks like this =>
set theDest to make hyperlink text destination with properties {name:"Some name", destination text:insertion point 902 of story id 44083 of document "kapitel 3.indd" of application "Adobe InDesign CS4"}
set theSource to make cross reference source with properties {name:"Some name",source text:< reference to the relevant text>}
this line for example looks like this =>
set theSource to make cross reference source with properties {name:"Some name", source text:cursorPosition, applied format:cross reference format id 44305 of document "kapitel 1.indd" of application "Adobe InDesign CS4"}
where "cursorPosition" was defined before by
set cursorPosition to object reference of selection
(the cross reference source needs the applied format reference too)
make hyperlink with properties {source:theSource, destination:theDest, visible:true, highlight:invert, width:thick, border color:dark green, border style:dashed, name:"Whatever" }
this line for example looks like this =>
make hyperlink with properties {source:theSource, destination:hyperlink text destination id 44184 of document "kapitel 3.indd" of application "Adobe InDesign CS4", border color:black, highlight:none, border style:solid, hidden:false, visible:true, width:thin}
end tell

How to insert cross references

I am continuing to learn how to use Pages after having done most of my word processing with MS Word. I am trying to add a caption to a graphic (i.e., Figure 1) and inserting in the text a cross reference to the graphic. Is there any way to do this?

click where you want a footnote/endnote > Menu > Insert Footnote/Endnote
Where you have them, is set in:
Inspector > Document > Footnotes & Endnotes
For more sophisticated references you will need to purchase and install EndNote X2
Peter

How do I cross reference to text (as in a reference citation)

I am using Frame 7.0. I want to create a cross reference to text (not a heading). For example, I have a citation such as (Smith, 1980) and I want to link that to the following:
H. Smith, 1980 "Have a good day" Martin Press, pgs. 46
I only want Smith, 1980 to appear as the link, not the entire description.
Thanks.

Another option is storing the custom text version in a paragraph autonumber that is entirely hidden, and use a cross-reference format that retrieves that autonumber only. The custom "autonumber" will be paragraph override (or otherwise you will have to define a unique paragraph tag for each source citation).
Shlomo Perets
MicroType, http://www.microtype.com
FrameMaker/TCS training & consulting * FM-to-Acrobat TimeSavers/Assistants
"Improve your FrameMaker Skills" web-based training sessions

How to create cross references in pages?

Hello,
I need to create cross references in pages, for example create a title with the name of a chart and the create a reference on the document. If I create more content and the number of the chart changes the references need to be up to date. This is supported by word... don't know on pages.
Thanks!

I suspect your tag is wrong, but in Pages '09 you just Insert a Bookmark.
Not possible however in Pages 5.
Peter

Successfully importing cross-references from Microsoft Word into InDesign?

Hello --
I am laying out a series of long documents (~130 pages each) in InDesign CS5.5.
The writer for the project has used cross-references in MS Word for areas like the TOC, index and page references ("See page X for more information").
Is it possible to import these cross-references into InDesign so that the InDesign document functions like the Word document with the cross-references?
I am thinking no because I am having a ton of trouble with it so far, but wanted to get a definite answer from an expert.
When I import the text, the cross-references appear in InDesign in the Hyperlinks/cross-reference panel. However, InDesign says they need to be updated based on the way the text flowed in InDesign. And when I click the auto update button, all sorts of funky stuff happens and basically -- the cross-references create a bunch of typos and become junk.
Thoughts? Knowledge on this topic?
Thanks in advance!!

wikiElvis wrote:
Hello --
I am laying out a series of long documents (~130 pages each) in InDesign CS5.5.
The writer for the project has used cross-references in MS Word for areas like the TOC, index and page references ("See page X for more information").
Is it possible to import these cross-references into InDesign so that the InDesign document functions like the Word document with the cross-references?
I am thinking no because I am having a ton of trouble with it so far, but wanted to get a definite answer from an expert.
When I import the text, the cross-references appear in InDesign in the Hyperlinks/cross-reference panel. However, InDesign says they need to be updated based on the way the text flowed in InDesign. And when I click the auto update button, all sorts of funky stuff happens and basically -- the cross-references create a bunch of typos and become junk.
Thoughts? Knowledge on this topic?
Thanks in advance!!
I can't speak to general or specific causes of your cross-reference problems. However, I believe that InDesign x-refs behave a bit differently in CS4, CS5, and CS5.5, and if you have either of these earlier releases, you might try them for comparison.
Also, you might want to look into the free trial of DTP Tools' cross-references plug-in for InDesign, at dtptools.com, to see if it's more successful than InDesign's built-in x-refs.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Word 2010 cross references drop when converted into a PDF

What do I need to do to make my Word 2010 cross references appear as active links in a PDF generated by Adobe PDFMaker?
I have Adobe Acrobat 9 Pro installed onto my PC.

I have 13 documents - "Word 10/AAX (all updates installed)", with many cross-references.
Links correctly translate to PDF including headings, TOC, websites, and cross-references WITHIN the same document, but cross-references between the 13 docs do not work.
The PDF shows the colour change, but there is no clickable link.
I am "Saving as PDF", have checked the PDFMaker settings, and have tried creating the PDF directly from AAX. Please help

Error regarding data load into Essbase cube for Measures using ODI

Hi Experts,
I am able to load metadata for dimensions into Essbase cube using ODI but when we are trying same for loading data for Measures encountring following errrors:
Time,Item,Location,Quantity,Price,Error_Reason
'07_JAN_97','0011500100','0000001001~1000~12~00','20','12200','Cannot end dataload. Essbase Error(1003014): Unknown Member [0011500100] in Data Load, [1] Records Completed'
'28_JAN_97','0011500100','0000001300~1000~12~00','30','667700','Cannot end dataload. Essbase Error(1003014): Unknown Member [0011500100] in Data Load, [1] Records Completed'
'28_JAN_97','0011500100','0000001300~1000~12~00','500','667700','Cannot end dataload. Essbase Error(1003014): Unknown Member [0011500100] in Data Load, [1] Records Completed'
Can anyone look into this and reply quickly as it's urgent requiremet.
Regards,
Rohan

We are having a similar problem. We're using the IKM SQL to Hyperion Essbase (DATA) knowledge module. We are mapping the actual data to the field called 'Data' in the model. But it kicks everything out saying 'Unknown Member [Data] in Data Load', as if it's trying to read that field as a dimension member. We can't see what we missed in building the interface. I would think the knowledge module would just know that the Data field is, um, data; not a dimension member. Has anyone else encountered this?
Sabrina

How to change to "EN" (english) before logging into Netweaver 2004s portal

Hello,
How do i change the language to english before logging into the netweaver portal 2004s. Once I enter, the language settings are in german and I dont see any option where a language selection can be made. Pls help.
Thanks,
SD

Hello Sebastian
another possibility is that you look in the user admin of your portal (http://<portal_server>:<port>/useradmin
Search for the user you log on with and change the default language there.
Regards
Georg

Error while loading into DTP

Hi,
I am loading data to a DSO from 0FI_AP_30. PSA I am able to load successfully but while loading this PSA data to DTP i get the following error message:
@5D@ Request REQU_D44GG0YIPPH7NBQ5F1VOCB890 not extracted; request is in obsolete version of DataSource @35@
and in help this is the respose:
Diagnosis
The request REQU_D44GG0YIPPH7NBQ5F1VOCB890 was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
System Response
The request is in PSA /BIC/B0001232, version 001. The current PSA version is 002. An extraction would lead to a short dump because of field incompatibilities.
Procedure
If you no longer require the data, you do not need to take any further action.
If you do still require the data, you can just extract it by creating a generic DataSource in the Myself source system in PSA /BIC/B0001232, version 001. You can find the technical name of the PSA table in the table RSTSODS with the specified PSA name and version. Convert the data using a separate transformation into the new target format.
Please let me know what can be done for this? pl give me the solution.
Thanks & Regards,
Vijaya

Hi Vijaya,
I am also facing the same error for data source 2LIS_03_BF, i am unable to load the same in one DSO, can you elaborate how you solved your issue ASAP?
I can't run IP because this data source requires downtime in ecc. We have already done that.
Thanks & Regards
Manna Das

ODI : how to raise cross reference error before loading into Essbase?

Similar Messages

Maybe you are looking for