ODI Packages execution based on condition

Hi,
We have clear the data using calc scripts and then load data into Hyperion using ODI packages. Currently i have one Package (Package1) to be executed on WD2 & WD3.
I have created an interface which will execute the script.
Here calc scripts are different which are to be executed on WD2 & WD3. I want to have all the steps in single package using any conditions.
Example:
Step1 - to check whether it is WD2,
If yes go to step2 and so on till step6.
If no, then go to step7.
Can any one help me on this
Thanks
Damo

Hi,
ODI variables could be useful for you. Use refresh variable step with appropriate query, then evaluate variable step and organize your logical branching. You could learn about variables fron Developer's guide http://docs.oracle.com/cd/E14571_01/integrate.1111/e12643/procedures.htm#CHDIFIGB (for ODI 11g).

Similar Messages

How to pass a Variable value into an ODI Scenario from ODI Package

I have created an Interface that uses the variable #ENTITY_ID for retrieving entity data from the DWH; now I have generated a Scenario from the interface and placed the Scenario in an ODI Package; am not sure how to pass the #ENTITY_ID variable to the ODI Scenario?
Any help is greately appreciated.
Best Regards
Bee

Hi Sutrtha,
Yeah I got the pop up asking to select the variables used, I have selected ENTITY_ID that was used by the interfaces, but on execution of the package the Scenario did not work as the passeed variable #ENTITY_ID is set to 0 instead of the value I am passing.
Am I missing something?
Regards
B

Suddenly ODI scheduled executions taking more time than usual.

Hi,
I have set ODI packages scheduled for execution.
From some days those are taking more time to execute themselves.
Before they used to take 1 hr 30 mins approx.
Now they are taking 3 - 3 hr 15 mins approx.
And there no any major change in data in terms of Quantity.
My ODI version s
Standalone Edition Version 11.1.1
Build ODI_11.1.1.3.0_GENERIC_100623.1635
ODI packages are mainly using Oracle as SOURCE and TARGET DB.
What things should i check to get to know reasons of sudden increase in time of execution.
Any pointers regarding this would be appreciated.
Thanks,
Mahesh

Mahesh,
Use some repository queries to retrieve the session task timings and compare your slow execution to a previous acceptable execution, then look for the biggest changes - this will highlight where you are slowing down, then its off to tune the item accordingly.
See here for some example reports , you might need to tweak for your current repos version but I dont think the table structures have changed that much :
http://rnm1978.wordpress.com/2010/11/03/analysing-odi-batch-performance/

Putting ODI packages into a .bat file

Hello,
I have multiple ODI packages and I want be able to execute these packages in a Window .bat execution. How do I call these packages say in a DOS command?
Thanks!

Create a scenario for each package and then you can call them by using startscen.bat that is the oracledi\bin directory.
Syntax: startscen <Name> <Version> <Context code> [<Log_Level>] [-SESSION_NAME=<session name>] [-KEYWORDS=<keywords>] [-NAME=<agent_name>] [-v=<trace level>] [<variable>=<value>]
e.g. startscen.bat SCENARIONAME 001 GLOBAL "-v=5" "PROJ1.VAR1=VARVALUE"
Cheers
John
http://john-goodwin.blogspot.com/

How to blink TreeView Nodes based on condition c#

suppose i am populating my tree view with data from database and i want to blink those nodes which has a specific data. now guide me with code how can i efficiently blink multiple tree view nodes based on condition in winform application.

Hi Mou_kolkata,
>> anyone can give me small working code for tree node blinking
Thank Armin for the details about blinking TreeView Nodes.
For a simple demo to blink TreeView nodes, you could refer the link below:
# Treeview control - How to make a node blink?
https://social.msdn.microsoft.com/Forums/en-US/64e7a4d7-3098-4370-990f-390cb3a640a1/treeview-control-how-to-make-a-node-blink
If you have issues when you blink Treeview nodes, please feel free to post a new thread in this forum, then you would get more help.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create additional Line in file based on condition available as part of ZINVOIC02 Idoc segment

Scenario Details:
Receiving Zinvoic02 Idoc in PI. Idoc to file translation creates comma separated file with .csv extn
The logic was kept in such a way that how many E1EDP01 (items) are available in IDoc that many no of records will be created in csv file.
The file logic for some the fields is as below:
No of records
InvNumber
InvDate
CusNumber
LineitemDesc
Tax1Type
Tax1%
for 1st E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
Populate when E1EDP04/MSKWZ=O2 or O4 with E1EDP19/KTEXT
Hardcode when E1EDP04/MSKWZ=O2 or O4
Sum all E1EDP04 /MSATZ when E1EDP04/MSKWZ=O2 or O4
for 2nd E1EDP01
E1EDK01-BELNR
E1EDK01-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
for 3rd E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
Additional Line to be created when one or more of E1EDP01 is having E1EDP04/MSKWZ = O3
same as above
same as above
same as above
Hardcode "REIM for USE TAX"
Hardcode ""
Hardcode ""
Now we have got addition requirement to add a new lineitem when tax code is equal to O3 for any of the E1EDP01.
Is it possible to create additional lineitem based on condition. If yes, please share what should be the approach.
How we can create the additional lineitem?
Currently we are using E1EDP01 to do context handling.
The target structure is :
MT_FILE
     INVOICE     0..unbounded
          InvNumber     0..1
          InvDate          0..1
          CusNumber     0..1
          LineitemDesc     0..1
          Tax1Type          0..1
          Tax1%               0..1

Hello,
Please add one extra field in the data structure of the target mapping and let its occurrence be 0..unbounded under the root node 'MT_ADP_Invoice'.
Apply the condition, if tax code MSKWZ (with its context changed to E1EDP01) equalsS to '03', then map it to the newly created target field whose occurrence is 0..unbounded.
This will then create an additional field which is your requirement.
The above is one way.
But if you want to have the same target field name as ADP_File appended for tax field being '03'.
Then in that case you can you two message mapping for one common operational mapping / interface.
In the first message mapping you need to have one target data structure created with the source data structure remaining the same as the one shown by you in scrn shot. Now this target data structure will be similar to the source, except that you need to add one more field at the end(name different from other fields) in target (whose occurrence should be 0..unbounded), and it needs to be mapped to E1EDP01 provided the tax code field MSKWZ(its context changed to E1EDP01) equalsS to constant '03'.
In the second message mapping you need to map the target structure of previous message mapping to the actual required structure. The newly added field should be mapped to ADP_File of your final target structure.
This will then create the same structure as required.
Note : Please change the occurence of ADP_File to 0..unbounded.
Regards,
Souvik

How to give color to the display of keyfigure based on condition using exception.

Dear Friends.
   I am trying to color "BAD3" in exception based on condition but my problem is in exception I can have only formula variable to compare the value, How to assign a value to formula variable in BEx Query designer.
What I am trying to do is :
   in Query designer :
   I have PO Quantity and Delivered Quantity.
if PO Qnantity > Delivered Quantity
    then Delivered Quantity field should be colored as "BAD3" in exception.
but here proble is in exception
I have alert level , operator, and value fields for Delivered Quantity keyfigure ( Under definition tab - Exception is defined on = Delivered Quantity ).
but for value field I dont have PO Quantity for that I have to supply one formula variable,
When I created a forumula and did this way
FV_PO_QUANTITY = PO_QUANTITY formula editor throws errors. I dont understand How to assign a value of key figure to formula variable and use it in EXceptions.
Please help me How I can solve my problem
I will greatly appreciate your any help.
Thanking you
Regards
Naim

Thank you so much for your replies,
I did following way and it helped me to solve my issues.
I created one formula and under formula I use boolean < funtion to compare the values.
like following way.
( 'PO Quantity' > 'Delivered Quantity' ) * ( FV_PO_QNT + PO_QUANTITY')
here fv_po_qnt is formula variable I supply that variable to exception and since I have the value in it.. it compares with Delievered Quantity value and colored the perticular cell.
Thanks again for your replies
Regards
Naim

How to stop workitem complete or how to keep work item in inbox based on conditions even if it completed

Hi,
my requirement is to call webdyn pro screen from workflow..
i am calling webdynpro screen by using FM :CALL_BROWSER from workflow.
when webdyn pro screen is called user will enter some values . if user closed webdyn pro screen with out entering any values we need show this workitem in his inbox. so that user can again open it and enter values in the webdyn pro screen.
Please help how to stop work item complete based on conditions.
Thanks,
phani

Hi,
As per my understanding, this is not a proper approach toy call web dynpro using FM CALL_BROWSER. is the web dynpro screen being called when user clicks on the work item from portal UWL OR from SAP SBWP ?
if you are calling web dynpro screen from portal UWL when user clicks on work item link, better you achieve it using SWFVISU tcode. in SWFVISU tcode you can maintain which web dynpro. application to call when particualr work item task come in user's inbox. in your web dynpro code, then you can write your buisiness logic when user clicks for example SUBMIT/SAVE button. on action submit/save button you can use FM SAP_WAPI_WORKITEM_COMPLETE to complete the worktiem once the user clicks on final submit/save button. in this way the workitem will get removed from user inbox only upon clicking on submit/save button.
You can refer below link for web dynpro for workitem:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70648e99-4cc1-2c10-879d-9c61003c69d6?QuickLink=index&…

Table Control - Input Enabling/Diabling of Rows based on Condition.

Hi,
In the TC, I want to Input Enable/Disable the rows based on Conditions. The First row is input enabled always. But the other rows, (2nd onwards) need to be Input Enabled/Disabled based on some conditions. It is possible to make this working. Can you please provide me a suitable solution for this?
Appreciate Your Help.
Thanks,
Kannan

Hi Kannan...
If we are talking about "Rows"...
then identify based on some conditions the row numbers and in PBO...loop at screen with screen name..set thier input properties and modify screen (make them input only)
If we are taking into consideration "columns"
There is an internal structure COLS where we can identify column number of screen name ...or we can take except for one particular column..
if some condition satisfied....
loop at screen where screen-name <> "Column which is input'.
Loop at screen...and make other columns display only.
modify screen
endif.
Regards
Byju

Need to send notification to a specific person based on condition

Please help.
I need to send notification to a specific person based on condition. When a specific hold is placed on an invoice, send a notification to the Buyer who is referenced on the Purchase Order that is associated with that invoice. It will be an FYI notification.
I'm looking at APINVHDN AP Hold Maiin Process. I thought possibly adding a notification into the "No" condition after the GET_APPROVER function since there would not be an approver on the invoice since it's on hold.
Any ideas would be very much appreciated.

Try the LiveCycle Designer forum.

Calling different pages in a single sap script based on conditions?

Hi All,
         Can anyone please give me an example of how to call different pages in a single sap script based on condition. Eg., i need to call 5 differnet pages from a single sap script based on 5 company codes.
Please help
Regards
Priya

This approach to make call from SAPscript. Its concept is similar to make call to a subroutine in another program. I would presume you understand how to use USING and CHANGING parameter. =)
SAPscript -
/: Perform get_date in program z_at_date
/:    using &p_year&
/:    changing &new_date&
/: endperform.
program z_at_date -
form get_date TABLES rec_in STRUCTURE itcsy
                                rec_out STRUCTURE itcsy..
DATA:
   v_year type char10.
sap script and subroutine uses itcsy structure to transmit parameters
first parameter is incoming while second parameter is out going
their function is like an internal table with header line
all data types between SAPscript and subroutine are string.
so, you might need additional conversion.
read incoming parameter with exact name from SAPscript
READ TABLE rec_in WITH KEY name = 'P_YEAR'.
IF sy-subrc EQ 0.
    v_year = rec_in-value.
ENDIF.
to return value, use the exact name on the second structure
    CONCATENATE v_year v_year INTO v_year.
    READ TABLE rec_out WITH KEY name = 'NEW_DATE'.
    IF sy-subrc EQ 0.
      rec_out-value = v_year.
      MODIFY rec_out TRANSPORTING value WHERE name = 'NEW_DATE'.
    ENDIF.
endform.
Hope this helps =)

Package execution problem with SQLSERVERAGENT

Hello,
I'm having a problem with the execution of SSIS packages: I created locally a package with SQL Server Data Tools, then I deployed it on my server in the SSISDB database. Then I created a job to execute periodically this package with SQL Server Agent. The
package works fine and does everything I want, but I always get a failed notification. In the global view of the execution I can see:
Result: "failed"
Package name: "Package.dtsx"
Task name: "Package"
Execution access path: "\Package"
Every other task returns a success and their execution access path is a subfolder of "\Package". I tried everything I found on the web, check the "Runtime 32bits" box, create a "Job Account" user to execute the package via a
"Job Account Proxy", modify the ProtectionLevel of the package to "DontSaveSensitive", give the "Job Account" user full rights on everything, nothing works.
Do you have an idea of what my problem is and how to solve it?
I must precise that all my packages do the same thing: I have a loop on all the csv files in a folder that for each file loads the contents of the file in my database and the delete the file. I observed that the error message do not appear when there is
no file in the folder when the package executes.
Thanks in advance.

Not sure what error message, is the one "est introuvable.
Cette erreur est retournée par la collection Connections lorsque l'élément de connexion spécifique est introuvable"?
So, here is in short: the ForEach Loop once in its beginning of operation "senses" the files currently present in the working folder. If a new file arrives after this stage, it will not see it.
In your case it seems that the ForEach "saw" a file at the beginning, but it was gone at the time the processing wanted it for execution.
Like many above indicated, the common practice, call
it elegant or not is to indeed move the files to a different directory (working folder). This is done to avoid collisions with some other activity in that folder.
Furthermore, you can have all the files deleted using a ForEach against the working folder as say in
http://beyondrelational.com/modules/2/blogs/88/posts/10178/ssis-delete-files-from-specified-folder-using-file-system-task-in-sql-server.aspx And there is no need to delete the working folder
itself.
The job is run in SQL Server's Agent
need to be set to run using a domain proxy account as it needs write access to the file system.
Arthur My Blog

Suppress Target structure based on condition

Hi
How to suppress target structure based on condition
Example:
Source is like:
<Details>
<Name>abdc</Name>
<ID>234</ID>
<Address>US</Address>
</Details>
I have two target structures
1:
<Details>
<Name>abdc</Name>
<ID>234</ID>
<Address>US</Address>
</Details>
2:
<Error>
    <ErrorID>
</Error>
if Any of the source filed is null then i dont want to map it to source structure. instead I want to assign an error id to ErrrorID node of the target.
example
abc,123,US
abc
in above case second record has two null values
so my target structure should be
<Details>
<Name>abc</Name>
<ID>123</ID>
<Address>US</Address>
</Details>
<Error>
    <ErrorID>2nd record has erro</ErrorID>
</Error>
How to acheive this..
Please help us
Regards
Sowmya

hi ,
plz try the following mapping
Name-->exist-->if than else-> tuue----->Name
                                                    false---(constant)--
error
ID-->exist-->if than else-> tuue----->ID
                                                 false---(constant)--
error
adress-->exist-->if than else-> tuue----->address
                                                      false---(constant)--
error
regards,
navneet

Spliting files based on condition using multi mapping with BPM

Hi All,
Can any one please let me know How to <b>Splite the outbound records based on condition using multi mapping with Integration Process in BPM</b>?
Thanks
Govindu.

Hi All,
Sorry for mistake this question for Exchange infrastructure guys.
Thanks,
Govindu

Executing OIM Process task based on Condition

Hi Experts ,
I have the following requirement :
when a OIM user field - X is updated with a value A i have to call task T1, generate a random number on this task and have to trigger CREATE user Task within in the same process definition of an IT resource
when the same OIM user field - X is updated with a value B i have to call task T1 again, generate a random number on this task and have to trigger DISABLE user Task.
Im taking the approach of OIM lookup triggers which will kickoff the task T1 when user field X is updated
My question is how can i add the conditional logic to a task(T1) to trigger the only one dependent task, either create user or disable user when a condition satisfies.
currently i have added create user task and disable task as the dependent tasks of the task T1.
If i am triggering create user task how can i get all the attribute mapping values of createuserAdp. since few are referring the process form, userdata and IT resource
Im confused and not sure as how to implement such Work flow based on conditions. hope some one can help me!!
Thanks in advance
Edited by: user8942439 on Aug 24, 2012 11:58 PM

Use the responses returned by task T1. Lets say for create user, Task T1 returns a response "CREATE". So in the responses tab add this response, select it and in the tasks to generate section add "Create user" task to this response. In the same way task T1 returns response "DISABLE", so on DISABLE response select task to generate Disable user.
regards,
GP

ODI Packages execution based on condition

Similar Messages

Maybe you are looking for