Spliting files based on condition using multi mapping with BPM

Hi All,
Can any one please let me know How to Splite the outbound records based on condition using multi mapping with Integration Process in BPM?
Thanks
Govindu.

Hi All,
Sorry for mistake this question for Exchange infrastructure guys.
Thanks,
Govindu

Similar Messages

Multi-Mapping with BPM?

Hi Experts,
Can anyone send me a scenario which contains multi-mapping using BPM (collect pattern)........I searched on SDN but cudn't find any scenario which contains Multi-Mapping BPM scenarios. All the scenarios which r available based on without BPM.............points will given to the approriate replies.
Thanks in Advance
Faisal

Hey
strange you didn't find it,it was the second link when i searched SDN with the string "multimapping BPM"
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanx
Aamir

Multi mapping - with BPM / without BPM

Hi Iam testing Multimapping with and without mapping.
in Mapping Editor
Source structure:
Messages 1..1
...Message1 1..1
......MT_Combined_file 1:1 DT_Combined_File
........DT_State 1..1
...........State_rec 0..unbounded
........DT_Supplier 1..1
..........Supplier_Rec 0..Unbounded
Target Structure:
Messages 1..1
...Message1 1..1
......MT_State 1:1 DT_State
........State 1..1
..........State_rec 0..Unbounded
...Message2 1..1
......MT_Supplier 1:1 DT_Supplier
........Supplier 1..1
...........Supplier_rec 0..Unbounded
Mapping:
DT_State -
> State
State_rec -
> State_rec
DT_Supplier -
> DT_Supplier
Supplier_rec -
> Supplier_rec
Testing XML taken from test tab and is as follows:
I copied XML from test tab as is and removed <ns0: messages > line.
 <ns0:Message1>
 <ns1:MT_Combined_File xmlns:ns1="http://bpm.split.com">
 <DT_State>
 <State_rec>NYC</State_rec>
 </DT_State>
 <DT_Supplier>
 <Supplier_rec>WalMart</Supplier_rec>
 </DT_Supplier>
 </ns1:MT_Combined_File>
 </ns0:Message1>
Could anyone help me what I'm doing wrong. I need to give sample XML to Legacy folks so that they generate XML data to be picked up by File Adapter.
Thanks for any help.

Hi,
take this part
<ns1:MT_Combined_File xmlns:ns1="http://bpm.split.com">
<DT_State>
<State_rec>NYC</State_rec>
</DT_State>
<DT_Supplier>
<Supplier_rec>WalMart</Supplier_rec>
</DT_Supplier>
</ns1:MT_Combined_File>
ignore <ns0:Message1> this will be generated at runtime.
Thanks,
Prakash

IDoc Package to File using Multi Mapping urjent

Hi Experts,
I have a scenario where PI 7.1 need to receive IDocs in a package and should send three files to target system. I am using multi mapping concept here, where i have created one message mapping, one operation mapping with three interfaces specified in it. I am getting the error "Inbound interface found several times (for same sender and receiver) for the outbound interface" .

Hi,
Please make occurence of the message type in message mapping as 0..unbounded.
Also in operation mapping the occurence of inbound interface as 0..unbounded.
Also now in configuration-->interface determination... access the new operation mapping.... u will c the occurence as 0..unbounded. Refresh the cache ad execute it once more...
Let us know the result...
Babu
Edited by: hlbabu123 on Apr 3, 2010 1:16 PM

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

IDoc to file. Grouping and generation of files based on condition

Hi All,
I am working on a scenario, Idoc to File. I need to create number of files based on occurrence of a field(vendor) in the idoc. Also the condition is to group by the field(vendor) and create as many files as the number of groups formed.
For e.g.: In an Idoc if there are ten items present and 3 vendors who are supplying it. The vendor and items can repeat in any order within the same idoc. 
I need to group the items by the vendors and create a file separately for each vendor. Like :
Item Vendor
Item1 V1
Item2 V1
Item3 V2
Item4 V2
Item5 V2
Item6 V2
Item1 V2
Item2 V2
Item3 V3
Item6 V3
What we have to achieve is, to group by the vendors irrespective of the order of the items or number of reoccurrence of the items. As you see, the Item1 is supplied by both V1 and V2. I need to generate 3 files as follows:
V1.xml with Item1 and Item2 details.
V2.xml with Item3, Item4, Item5, Item6, Item1 Item2 details.
V3.xml with Item3 and Item6 details.
Can someone please help me with achieving this without using BPM?

Hi Shashi,
For this scenario you have to use multimaping without BPM using this blog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
And while doing your message mapping you have to use removeContext & SplitByValue (double clike the on splitbyvalue and select value changed) function. This function you have to use with the node in which your Vendor is coming. Example:
if required to sort the vendor, then first sort the vendor in the below mapping.
Vendor (NODE) -
> removeContext -
> SplitByValue (value Changed) -
> IDOC.
By doing this your vendor will be grouped and you will get new IDOC on change of Vendor.
Regards,
Sarvesh

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

Error in Multi-mapping without BPM

Hi frnds,
I am doing a scenario File-XI-File. I am using the multi-splitting thing in the Message mapping. I have taken care of all the occurance's and "enhanced" thing in the IR and ID resp. I m using SP16. I want to avoid BPM.
But therez sme error cming up. When I check the MONI, its shwing "No messages created from split mapping" and when I test my interface using the Test Configuration in the ID, its shwing error in the Receiver Determination -- "HTTP connection to ABAP Runtime failed. Error: 403 Forbidden"
I have checked most of the blogs and forum suggestions. I have checked the ICF activations as well ...
So, do come back to me with your valuable suggestions, and I will award them points, if they really help me out.
Thanks and regards.
Neetesh

Hi Neetesh,

When I check the MONI, its shwing "No messages created from split mapping"
For this, Can you check the source XML. Does it contain Tags like <messages> .. If yes, you need to remove them from your source XML.
If i am right, you have copied the XML from the TEST tab of the message mapping and pasted it in a notepad and saved it without making any changes at all..... Just do as i have mentioned above and i am sure you will no more get that error message in your MONI....
Also go through this weblog which talks about multi-mapping without BPM,
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards,
Abhy

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

Multi-Mapping without BPM

Hi ,
I am following this weblog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
but stuck up with what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth

ID will have only ID under it. instead of creating flat structure like the one above Jin has changed the strucutre below . you will have only ID field in it or you want u can add other fields in it .
Regards
Sreeram.G.Reddy

How to use Google Maps with dvt:map ?

http://www.oracle.com/technology/software/products/mapviewer/text_files/mapviewer1112_readme.txt
http://www.oracle.com/technology/software/products/mapviewer/index.html
Native support of Google Maps and Bing Maps API. You can now display
Google and Bing maps natively in your Oracle Maps (JavaScript)
applications. Please check out the online Oracle Maps JSDoc API on
how to use the new classes.Unfortunatly it looks like it's not possible with dvt:map
http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e12418/tagdoc/dvt_map.html
It's an important requirement for our project and probably for many ADF customers.
I would like to know if :
Is there any way to use Google Maps with dvt:map ?
Otherwise, is there any plan to support it ? Should we expect it within a year ?
Else, I think we will use directly the Javascript Oracle Maps API but we will miss the built-in functionnalities of dvt:map
Thanks in advance,
JP

Any news about this theme?

Value mapping with BPM

Hi Experts
How to do value mapping with BPM.
I tried searching for blogs in SDN but i didnt get any solution
Regards
Sowmya

Hi,
Your question is not very clear. Let me know how you want to use Value mapping?
You can implement value mapping in two ways..
1. Value Mapping Replecation Method, in which we create ABAP program (outbound proxy) in R3 which selects data from R3 tables and sends into XI, and which get stored in XI JAVA Cache untill you run the ABAP program next time which is very rare. This kind of method is best when you have large amount of R3 data.
2. If you have some data which is used just to varify the conditions at run time then in that case we go for Value Mapping creation in Integration Directiory. Below mentiond blog will give an idea how to use Value mapping in ID.
/people/community.user/blog/2007/01/08/valuemapping-using-the-graphical-mapping-tool
Value Mapping is used in Graphical Mapping which gives the value at run time only, so you cannot test it in TEST Tab of message mapping.
So as per you question, BPM can come into picture later on after you maintain the value mapping in ID and do the corresponding mapping in IR.
Regards,
Sarvesh

How to create additional Line in file based on condition available as part of ZINVOIC02 Idoc segment

Scenario Details:
Receiving Zinvoic02 Idoc in PI. Idoc to file translation creates comma separated file with .csv extn
The logic was kept in such a way that how many E1EDP01 (items) are available in IDoc that many no of records will be created in csv file.
The file logic for some the fields is as below:
No of records
InvNumber
InvDate
CusNumber
LineitemDesc
Tax1Type
Tax1%
for 1st E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
Populate when E1EDP04/MSKWZ=O2 or O4 with E1EDP19/KTEXT
Hardcode when E1EDP04/MSKWZ=O2 or O4
Sum all E1EDP04 /MSATZ when E1EDP04/MSKWZ=O2 or O4
for 2nd E1EDP01
E1EDK01-BELNR
E1EDK01-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
for 3rd E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
Additional Line to be created when one or more of E1EDP01 is having E1EDP04/MSKWZ = O3
same as above
same as above
same as above
Hardcode "REIM for USE TAX"
Hardcode ""
Hardcode ""
Now we have got addition requirement to add a new lineitem when tax code is equal to O3 for any of the E1EDP01.
Is it possible to create additional lineitem based on condition. If yes, please share what should be the approach.
How we can create the additional lineitem?
Currently we are using E1EDP01 to do context handling.
The target structure is :
MT_FILE
     INVOICE     0..unbounded
          InvNumber     0..1
          InvDate          0..1
          CusNumber     0..1
          LineitemDesc     0..1
          Tax1Type          0..1
          Tax1%               0..1

Hello,
Please add one extra field in the data structure of the target mapping and let its occurrence be 0..unbounded under the root node 'MT_ADP_Invoice'.
Apply the condition, if tax code MSKWZ (with its context changed to E1EDP01) equalsS to '03', then map it to the newly created target field whose occurrence is 0..unbounded.
This will then create an additional field which is your requirement.
The above is one way.
But if you want to have the same target field name as ADP_File appended for tax field being '03'.
Then in that case you can you two message mapping for one common operational mapping / interface.
In the first message mapping you need to have one target data structure created with the source data structure remaining the same as the one shown by you in scrn shot. Now this target data structure will be similar to the source, except that you need to add one more field at the end(name different from other fields) in target (whose occurrence should be 0..unbounded), and it needs to be mapped to E1EDP01 provided the tax code field MSKWZ(its context changed to E1EDP01) equalsS to constant '03'.
In the second message mapping you need to map the target structure of previous message mapping to the actual required structure. The newly added field should be mapped to ADP_File of your final target structure.
This will then create the same structure as required.
Note : Please change the occurence of ADP_File to 0..unbounded.
Regards,
Souvik

Multi-mapping with message bundling but without using BPM

Hi all,
I have a requirement to bunch specific no. of records (say 50) from source message and create separate target messages for those bunches. For example, if the source message has 120 records, then there should be three separate target messages created containing 50, 50 and 20 records each.
I am wondering whether this multi-mapping is possible without using BPM, as the typical no. of records in the source message are in the range of 600 to 800, and rarely (twice or thrice a month) they shoot up to 2000. So my concern is whether BPM would affect the performance. We are using PI at SP12.
Regards,
- Shankar.

Sorry for late reply.. Well the sender is a file system, which sends a single XML file containing multiple records. (I mean I have a sender file adapter that polls periodically from a specific path and picks up the file when it is available)
The no. of records in the source file may be different in each run. The requirement on the receiver system is that it can handle a file which has maximum of 'n' records only (say 50 in my example)
Now the sender file can contain any no. of records. It may contain 10 on some day, or 200 the next day, or 120 on the third day. But on the receiver side, I want the files to be created such that each will contain AT MAX 50 records.
So, if source file has <=50 records, then there will be only 1 target file having the same no. of records.
If source file has between 51 to 100 records, then there will be two target files. One will have 50 records, and the second will have remaining records.
And so on..
Regards,
- Shankar.

How to give color to the display of keyfigure based on condition using exception.

Dear Friends.
 I am trying to color "BAD3" in exception based on condition but my problem is in exception I can have only formula variable to compare the value, How to assign a value to formula variable in BEx Query designer.
What I am trying to do is :
 in Query designer :
 I have PO Quantity and Delivered Quantity.
if PO Qnantity > Delivered Quantity
 then Delivered Quantity field should be colored as "BAD3" in exception.
but here proble is in exception
I have alert level , operator, and value fields for Delivered Quantity keyfigure ( Under definition tab - Exception is defined on = Delivered Quantity ).
but for value field I dont have PO Quantity for that I have to supply one formula variable,
When I created a forumula and did this way
FV_PO_QUANTITY = PO_QUANTITY formula editor throws errors. I dont understand How to assign a value of key figure to formula variable and use it in EXceptions.
Please help me How I can solve my problem
I will greatly appreciate your any help.
Thanking you
Regards
Naim

Thank you so much for your replies,
I did following way and it helped me to solve my issues.
I created one formula and under formula I use boolean < funtion to compare the values.
like following way.
( 'PO Quantity' > 'Delivered Quantity' ) * ( FV_PO_QNT + PO_QUANTITY')
here fv_po_qnt is formula variable I supply that variable to exception and since I have the value in it.. it compares with Delievered Quantity value and colored the perticular cell.
Thanks again for your replies
Regards
Naim

Spliting files based on condition using multi mapping with BPM

Similar Messages

Maybe you are looking for