ODS and Infocube showing different results

Hi,
I loaded same data to Infocube and ODS but they are both showing different result in BEX.
ODS
ODS report is showing summarised values e.g
vendor               order value                   invoice value        date
00001                    20                               20                 01.01.2007
Infocube
result is showing not summarised values
vendor               order value                   invoice value        date
00001                    20                                 0                      0
                              0                                20                  01.01.2007
I would like to make the infocube result same as the ODS because I am remodelling so that we start reporting from Infocube rather than ODS.
thanks

Hi,
this is the scenario
currently we are reporting from ODS object which fetch data from 3 ODSes. now I am asked to remodel so that we can report from infocube not ODS.
steps I have taken so far.
- created new infocube
- created 3 update rules ( same Update rules that gives the reporting ODS data).
my target is to make sure that the current ODS report is the same as the infocube report but so far the report is not consistent
I compared the data in the ODS and infocube and they are exactly the same but the report is showing differently

Similar Messages

Dba_index_name and dba_ind_columns showing different results

Hi All,
I am confused why it is showing different results:
[email protected]#>select index_name from dba_indexes where table_name='CRBTPROV_FINAL';
INDEX_NAME
CRBTPROV_INDX1
[email protected]#>select index_name from dba_IND_COLUMNS where table_name='CRBTPROV_FINAL';
INDEX_NAME
CRBTPROV_INDX1
MSISDN_IDX
When trying to drop index MSISDN_IDX it gives error:
ERROR at line 1:
ORA-00054: resource busy and acquire with NOWAIT specified
But when trying to check where all the index is used using v$access:
select * from v$access where object='MSISDN_IDX';
no rows selected
Regards,
Kirti

If I run the following query on a 9.2.0.6 database, no index is listed:
select type, count(*) from v$access group by type;CURSOR
FUNCTION
NON-EXISTENT
PACKAGE
SEQUENCE
SYNONYM
TABLE
TRIGGER
VIEW
It seems that index is not taken into account by v$access ?

Variance Scaling in Query and Web Template Showing Different Results

Hi experts,
I have the following problem - variance scaling in my query and web template are showing different results.
My variance in column is set as follows:
Formula: NODIM(A % B)
Scaling Factor: 1
I have a structure in row that uses Scaling Factor of 1,000.
Let say the value of Column A is 120 and Column B is 100.
When I execute the query, it will show 0.02
However, when I execute the web template it will show the correct scaling i.e. 20.
May I know what can I do to correct above scaling error?
Thank you!

You can not remove the scalling factor, but once you check the checkbox below the dropdown menu, the scalling factor will go away.
I checked at my end and when I set the scalling fact as 1, I was getting 9.9% while I was expecting 9900%. When I removed the scalling factor I started getting 9900%.
I would let you know if I came across anything else.
What about the unit of Column A and B. Are they same or different?
- Danny
Edited by: Danny Matt on Jun 22, 2009 1:54 PM

Web Part showing different result in different regions

Hi All,
We have a
stock web-part which is integrated into our SharePoint site . And this stock web-part is showing different result in different regions .As the output of the web-part is perfect in India,US,UK and working quite opposite in Singapore,china and Malaysia.Can
any one help me how can I solve the issue
Samar

Hi Samar,
As the stock web part is a custom web part, we cannot know how it works. For this issue, I suggest you ask the web part developers or support for help.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Why different types of peak detectors show different results?

In my project i need to insert a peak detector but when i use different types of peak detectors they show different results. why is this so?

I also find the thresholds used will give different results.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to change it if some data is wrong in ODS and infocube

hi all:
could you please tell me how to change it if some data is wrong in ODS and infocube ?
Best regards

You receive information on all requests that have run in the InfoCube and you can delete requests if required.
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
Request ID you can find in administration of the InfoCube. If a cubes is compressed you can't delete requestwise...
Regards
Andreas

Deltas on ODS and Infocube

Hi All,
i need information on how to do deltas on ods. i did two full uploads for ods 0fiar_o03 and then infocube. i need to do delta for this ods and cube. Please give me the steps to do delta for ods and infocube.
regards
raja

How are you doing the full load to ODS 0FIAR_O03. Are you giving any selection criteria.
In order start pulling Delta to the ODS you need to do a Full repair request or else you need to delete the full load requests from ODS and reload using Initialization.
Anways you are loading full load request in to the ODS, so it would be better to load Init Load next time and then start picking up deltas.
Delta to the Infocube is easily possible, by selecting Init in ODS after deleting all the data from the infocube. After that only the delta records from change log will be taken to the Cube from the ODS.
The delta to the cube can be performed irrespective of whether you performa Full load or Delta load in to the ODS.
Hope it helps!!!

I m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

i m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

Hello Mubashir surf google and try pressing power and home button at the same time untill apple sign shows up and then leave it .
Otherwise surf google you mite have to edit you host file in windows , system32
Let me know if it works

Software inventory report and PC show different information

Hi,
The scenario is the following:
SCCM 2012 R2.
Clients with windows 8.
The report "Software registered in Add Remove Programs on a specific computer" and "Programs and Features" show different information.
Programs and features screenshot(ordered by name):
Report screenshot (ordered by name):
The question is:
Is the above normal behavior?
if not
How to get in the report "Software registered in Add Remove Programs on a specific computer" all of the software listed in "Programs and Features"?
Thanks in advance!

Take a look at that device in Resource Explorer. Notice that on a 64-bit device there is an 'Installed Applications' class and and 'Installed Applications (64)' class. This data comes from the registry, and on a 64-bit operating system there
are actually two separate 'Add/Remove Programs' lists that are aggregated in the OS user interface.
If in Resource Explorer you see all of the software you expect to see, but not in the report, it is likely because the report is only looking at the 'Installed Applications' class and and not 'Installed Applications (64)' class.
If you enable the 'Installed Software' class (either by going into the client settings or the AI node), you will notice that the 'Installed Software' class is a combined version of both the 32-bit and 64-bit applications. This is much easier to report
off of.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Is there any way for updating wrong data in ODS and infocube?

Hi all
Is there any way for correcting wrong data in ODS and infocube?

You could do a selective deletion, by specifying the filter values, so that you only delete a subset of the entire data. You could then do a re-load for the same selection so that there is no duplication of records.
This is on the assumption, that your incorrect data is due to some incorrect update or transfer rules, which you have now corrected (before the re-load).
mate, you have mentioned that You could then do a re-load for the same selection .
could you please tell me how to do a re-load ? thank you very much

Difference Between ODS and Infocube.

Hi Everyone,
ODS and infocube are both infoprovider, what are the difference between the 2?
thanks,
Ramil

Re: ods vs infocube
ODS and Infocube..
Difference between InfoCube and ODS Object
Assign points if its hepful.

Count and Sum show different in Summary tab

Hello friends,
Webi 4 version
I have a webi dcument with 4 report tabs. Summary, Expense,Revenue and Forecasting.
I have a SUM value in Expense tab and Revenue tab. I also have Count value in Forecasing.When I copy these SUM and Count values to Summary tab, they show different values than those in other tabs.
Please help me to resolve this
Thanks
Renpal

Hi Renpal,
Even if we write the aggregate values in to a variable and if you copy that variable in Summary tab it may not give the same result.For Example.
If count of Sales orders in Detail tab is showing as 500 and in Summary tab it may show as 489. This is because in Detail tab there might be some cells which are "#" or Not assigned. so due to granularity it will count each and every cell, incase of summary all # or Not Assigned are calculated as 1.
Can you check wrt the above example where exactly the data is not matching.
Regards,
G.SaiNath

ITunes and iPod show different song counts... not all songs sync

Hi,
I've been having this problem for many many years.
I have more than 18,000 songs now, and the song count in iTunes is always 5 higher than on the iPod. I have my iPod set to sync the entire library. All songs in the library are checked for sync as well. I get no error message during sync that something might be missing, incompatible, or corrupt When I look at iPod music in iTunes it has the wrong count as well.
Every time a new version of iTunes comes out, I send feedback to Apple regarding this issue. As expected, Apple ignores their feedback, and from what I can tell they ignore the community forums as well, and they have yet to address the issue in any way, or even contact me about it.
I'd like to find which songs are bad and remove/delete them from my library and collection or fix them. Is there a sync log hidden somewhere that I can check to see which songs will or won't sync? Why doesn't iTunes tell us whether or not it expects a song to sync or if it's iPod compatible? Why does it say less songs will sync without giving a reason why?
I've heard that iPods don't sync duplicate files, but I've looked at my duplicates.. At some point, Apple screwed that up too, it shows songs that are from different compilations as duplicates now, instead of looking at the data proper to determine if it's a duplicate, it seems to just look at the Artist and Song Title and even that doesn't seem to be correct because I have more duplicate song titles listed and in some cases it lists songs from two different artists as being duplicates. I have many more duplicates listed in itunes than the discrepancy in the song count would suggest... 3,835 more songs to be exact.
I've tried to select only checked songs and get the same results. I've tried to restore the iPod and I get the same results. I've tried clearing the library completely and reloading all songs and I still get the same results. I've scanned through the library and all songs appear to have compatible settings. All my songs are either mp3 or m4a(aac) formats. I don't use playlists at all.
If anyone knows of a solution, please let me know. I don't want to have to check every single file.
Thanks!

Dougout78 wrote:
Every time a new version of iTunes comes out, I send feedback to Apple regarding this issue. As expected, Apple ignores their feedback, and from what I can tell they ignore the community forums as well, and they have yet to address the issue in any way, or even contact me about it.
So that you know, for the future, Apple makes it very clear (specifically so, when you submit Feedback) that they do not respond to the feedback directly. They do however, read the feedback and consider suggestions for improvements to iPods. They also look for - and act upon - bug reports etc. That's what the Feedback is for.
They also make it clear that they do not monitor or respond to these discussions. (That said, Apple employees are free to - and do look at - some of the posts and have been known to contact posters directly when looking for further information regarding bugs.)
As you have now found, this community (as Apple now prefers to call it) can often help sort out your problems, espcecially when skilled users such as tt2 (aka Steve) are let loose!

Oracle function and query return different results

Hi, I am using oracle 10g database.
Function is :
create or replace FUNCTION FUNC_FAAL(myCode number,firstDate date
*, secondDate date)*
RETURN INTEGER as
rtr integer;
BEGIN
select count() into rtr*
from myschema.my_table tbl where tbl.myDateColumn between firstDate and
secondDate and tbl.kkct is null and tbl.myNumberColumn = myCode ;
return (rtr);
END FUNC_FAAL;
This function returns 117177 as result.
But if I run same query in the function seperately ;
select count()*
from myschema.my_table tbl
where tbl.myDateColumn between firstDate and secondDate
and tbl.kkct is null and tbl.myNumberColumn = myCode ;
I get different result 11344 (which is the right one).
Table and function are in the same schema.
What can be the problem ?
Thanks.

1. i think ur parameter name and Column names are same Firstdate and seconddate try to choose different name
2. try using Trunc function around your dates
where trunc(tbl.myDateColumn) between trunc(firstDate) and trunc(secondDate)then compare the result....sometimes time elements comes into play.
Baig
[My Oracle Blog|http://baigsorcl.blogspot.com/]

Mac and Windows showing different hard drive space remaining?

Hello Guys,
I am using my 1tb hard drive with mac and windows and while checking the space remaining, my mac says roughly 600gb left and my windows comp. says about 500gb left. I am just wondering which one of the storage remaining statements is correct and why they both show different numbers (by 100gb)? If it helps, this also happens to my 16gb flash drive. mac says 10 gb left, and windows says less space left (dont remember actual number, but was roughly 6-8).
Just asking becuase I want to know why such a big difference in size remaining. Could it have to do with the way each OS sees what defines the harddrive as full?
if it matters, my hdd format is MS-DOS (FAT32).
Thanks a lot,
krm1897

haha its been 2 years. And no, i didn't figure it out, but i speculate it may have to do how Mac OSX and Windows reads the FAT file system (my tb hdd was FAT formatted so i could use it on both OS) and calculates remaining space.
That may be right, or it may be completely wrong lol
krm1897

ODS and Infocube showing different results

Similar Messages

Maybe you are looking for