OEM GC 10.2.0.3.0 Prereqchecker Session ended due to error ...

RHEL 5.4
Existing Database: 11gR1 (11.1.0.6)
Kindly assist me with the following issue ... Thanks!
I need to install OEM GC Management Service 10.2.0.3 first before I can apply the 10.2.0.5 patch.
The 11gR1 upgrade was successful. Now when I tyr to run the Prerequisite Check in Standalone Mode for 10.2.0.3 OMS, I am receiving the following error:
Starting execution of Prerequisites...
Session ended due to error: No checks found
=================================================================================================
DETAILS:
Installing Enterprise Manager Using an Existing Database
Component: oracle.sysman.top.oms
./install/runInstaller -prereqchecker PREREQ_CONFIG_LOCATION=/u002/app/oracle/product/OEM_GC_10.2.0.3.0/Disk1/rdbms/Disk1/stage/prereq -entryPoint oracle.sysman.top.oms -prereqLogLoc /tmp -silent
Starting Oracle Prerequisite Checker...
Checking installer requirements...
Checking operating system version: must be redhat-3, redhat-4, SuSE-9 or asianux-2
Passed
Checking swap space: must be greater than 150 MB. Actual 5164 MB Passed
Checking Temp space: must be greater than 300 MB. Actual 90951 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-02-19_04-51-38PM. Please wait ...dallindr187 devoem01 >
Oracle Prerequisite Checker version Version 10.2.0.3.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
Starting execution of Prerequisites...
Session ended due to error: No checks found

I think you are trying to use the exiting db for using OMS.. while parisng pre-requite for the exisiting db it has failed .
Plz read the pre requiiste for oem installation using exisitng db. you will have increase few parameters for this.
you can refer to this link for pre-requisite
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm
Anil Malkai
Edited by: Anil Malkai on Feb 19, 2010 8:20 PM

Similar Messages

Replace windows 7 home premium 64bit oem

Hi I've a Lenovo g770 laptop from Poland and using in uk. Changing language to uk does not work 100% on home premium edition. So if I buy new windows 7 in uk could I install this as a new oem version on the laptop replacing existing (which would be used as recovery) and therefore replacing the key associated with the machine, or just keep the original oem recovery as is and install new uk version - ending up with two keys one on machine for original and one for the Dvd version. Hope this makes sense.
Thanks

There is something else you may want look at first. Use Anytime upgrade to upgrade your existing version to Windows 7 Ultimate. That would allow you to install language packs and change your current version of windows to whatever language you want.
http://windows.microsoft.com/en-us/windows7/help/videos/upgrade-to-another-edition-of-windows-7-by-u...
http://windows.microsoft.com/en-gb/windows7/products/features/language-packs
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Oracle 11g OEM job issue

Hi all,
After Oracle 11g migration, i have been facing issues in OEM scheduling. Twice the job did not run even after 11.2.0.7 upgrade. Hence i would like to explore the possibility of scheduling the same in DBMS jobs (we have not faced even a single failure since migration). However there is no mail alert available for successful completion of the job. In this regard i would like to have your views and help to create alerts to proceed further.
Thankx

Hi Ravi,
Really the link helps,eventhough i have been looking for the rootcause to overcome from the job failure(scheduled jobs)
Actually after completion/succeded of my scheduled job i may also get "INITIALIZATION ERROR" status message,so i need to be Re-schedule the particular job again
for next day.
Look up screenshot of the error
Job Name=OEM_FLEET_ICL_SEND_6_30_AM_DAILY
Job Owner=SYSMAN
Job Type=SQL Script
Target Type=Database Instance
Timestamp=Apr 19, 2011 6:30:44 AM
Status=Initialization Error
Step Output=
Command:Output Log
SQLPlus: Release 11.2.0.2.0 Production on Tue Apr 19 06:30:15 2011*
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> SQL> SQL> SQL> Connected.
SQL> SQL> SQL> SQL>
PL/SQL procedure successfully completed.
SQL> SP2-0103: Nothing in SQL buffer to run.
SQL>
Commit complete.
SQL> SQL> SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
*~~~End Step Output/Error Log~~~*
kindly advice me on this
Thanks

Process flow fails in OEM

I am trying to schedule an external process in OEM. The task has been successfully deployed from Deployment Manager. The process flow location is owf_locn and the process flow name is stg_tgt. The parameters that I specified were "runtime_owner owf_locn process stg_tgt". The scheduled job ends with the error below. Preferred credentials were set for the runtime_user. Have I selected the correct parameters or is there something else that I have missed?
SQL>
Session altered.
Role set.
Stage 1: Decoding Parameters
| location_name=owf_locn
| task_type=ProcessFlow
| task_name=stg_tgt
Stage 2: Opening Task
declare
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at line 261

Hi Igor
We're getting close, but not quite there yet. You may have missed my last posting due to the similar time of posting.
My batch files will require reference to an application on a remote machine. Thus while I can copy the batch file to the server, the application referenced in the batch file must refer to files on another remote server specified as \\server2\d$\external.ear. As you can see this requires an administrative account on the remote server to access the 'd$' directory. In my last posting I had reached the stage where the batch job was denied access to the remote server, but otherwise (eroneously) reported success. What account do these jobs run against so that I can set up access permissions on the remote server?
I tried your suggestions. #1 fails for the above access problem. #2 runs for hours until I cancel - this is the case anytime that I have tried using c:\windows\system32\cmd.exe. #3 Not sure what you mean by set up and register a file location?

IFS problem in OEM

I've installed OCS 903 on Solaris 8, when I wish to start the service from the OEM Page -> System Componenet -> "iFS_xxx:1521:storage.xxx:IFS_IAS", I got this error "Servlet error: Renderer failed: java.lang.NoSuchMethodError" appeared at below the button "Set Local Componenets". Anyway to fix it?
I'm running Xvnc on port 2, I can access to other system component with no problem, just the IFS given me the error msg.

1 the service_name parameter of your database is not orcl.
2 The database isn't open, so the database didn't register itself with the listener
3 You didn't set up static registration of the database in listener.ora (required in 9i) so you don't have other mechanisms to connect.
Apart from that: this very question has been asked at least 1 milliion times.
You are kindly requested to search this forum before asking it needlessley again.
Sybrand Bakker
Senior Oracle DBA'

Error: ora-12560 while installing OEM 10g

I have oracle db 10.1.0.3 and i was trying to install OEM 10.1.0.3 everything went fine until i had that error error messagne while creating the clone database instance. ora-12560: TNS protocol adapter error... anyone can help?

Needs more info. Are you able to work/connect on your primary db thrugh OEM ?
Regards,
http://askyogesh.com

OEM agent deployment : Status=255

Hi,
I am deploying OEM Agent 10.2.0.2.0 on Linux (32-bit). As first installation was failed because of permission issue, I tried to reinstall it. I ended with this error :
Initializing Java Virtual Machine from /tmp/OraInstall2007-02-26_03-45-43PM/jre/1.4.2/bin/java. Please wait...
Completed with Status=255
I tried to delete old installed folder but still same.
Can anyone help in resolving this?
Thanks in adv.

I am following the orale documentation, the link is following:
http://download-west.oracle.com/docs/cd/B14099_19/manage.1012/b16228/deploying_the_management_agent.htm#CIHEJIJC
I installed agents on 3 other Linux (64 bit) successfully. But this time it is giving error. This time I have applied OEM plug-in where OEM is installed to monitor Oracle Application server and after that tried to deploy an agent on host. First time the link, setup was successful but at the end it suggested to change the permission os an .xml file. after doing that I end up with the error. It seems some cleanup issue. Pl. give your suggestions...
Thanks

OWB and OEM Version ERROR (Urgent)

Hi All,
I am using OracleWarehouse builder version 9.2.0.2.0.8 and OEM version 9.2.0.2.0.10 and i am getting error while creating cubes in OEM. Is it due to different versions of OWB and OEM.
Please Let me know, if anyone knows about it.
with regards
Mukesh Harjai

Hi Mukesh,
You do not need to create the dimensions in OEM, you can use Warehouse Builder to do this.
On how to do this, check out this viewlet: http://otn.oracle.com/products/warehouse/htdocs/OLAP_viewlet_swf.html, and perhaps take a look at the following whitepaper: http://otn.oracle.com/products/warehouse/pdf/Enabling_OLAP_with_OWB.pdf.
Thanks,
Mark.

Gather statistics in OEM

Hi,
I launched a job to gather statistics on just one schema on my DATABASE in OEM. How can I identify it's session ? Many thanks before.

You can try below query:
select s.username, s.sid,s.serial#, sql.sql_Text
from v$session s, v$sqlarea sql
where s.sql_address = sql.address and s.sql_hash_value = sql.hash_value and
s.username = '&username' and lower(sql.sql_text) like '%dbms_stats%'
Best Regards
Krystian Zieja / mob

Sql Tuning using OEM and Logon triggers

OEM = 10.2.0.4/Agent 10.2.0.4
Target = 10.2.0.3 Db
We have several db users that have session level adjustments made by use of logon triggers. When OEM is used to review one of those session's performance and sql tuning opportunities - are the logon triggers and the session level settings taken into consideration? Another way to ask is if the suggested changes from the sql profiler are making decisions based on the user's session level settings?
Thank you in advance.
-abe

Your logon triggers affect the new sessions. When you monitor with OEM, it is no affect on OEM's activity. Hoping that, your logon trigger did not affect the user which OEM uses to connect to repository DB.

OEM does not start up

Hi there,
I have a strange behaviour of OEM, It doen not even start, I have a message saying: fatal error, registry problem.
I tried to re-install the product (coming with IDS, Oracle8i Entreprise Edition Release 3 (8.1.7)), the same problem occurs again.
I understand that there is some pb with the registries, but I could not fix it.
Help please
Thanks in advance
JF

Okay, I've done some more investigation.
I logged into sqlplus as SYS AS SYSDBA
Tried to connect to SYSMAN but the system responded with a message that the account is locked and then it disconnected my session.
Connected back to the database via the command: CONNECT SYS AS SYSDBA
Entered the password and connected successfully
Unlocked the SYSMAN account via the command: ALTER USER SYSMAN ACCOUNT UNLOCK;
Connected to the database successfully as SYSMAN
Tried to open OEM: Opened directly to the Status display with out opening the login page
Went back to sqlplus and tried connection as SYSMAN but the system said the account was locked
Trace file emoms.trc also says the account is locked.
So it does look like the attempt to open the OEM, or something else, is locking the sysman account

OEM:oem agent doesn't start in case of using OS authentication.

Dear experts!
I've got 10gR2 and I'd like to use OS authentication (Win 2003 server). Having changed parameters os_roles=true and os_autent_prefix='' and restarted DB I tried to start OEM. Of course, I had an error of starting oem agent - "ora-01045:user dbsnmp lacks create session privilege ..." because of enabling OS authentication. But I don't know exactly how I can change DBSNMP-user from password-authentication to external-authentication. Should I create a new os-user DBSNMP? Or I should just alter existing oracle-user DBSNMP to external authentication?
Thanks a lot in advance!
Alexey.

The first thing to check is that all administrator users have the "Logon as batch job" privilege under Win 2003's Security Policy.

OEM notification

I have resumable timeout set to 15 mts. Wanted to get notified when ever session gets suspended due to space issue.
I have defined new notification rule in OEM 10g, In metrics section i have choosen "Session Suspended by Tablespace Limitation" and made the rule PUBLIC.
The issue is, i have generated scenario where session is suspended due to lack of space, In OEM database page i could see the Alert, but the mail
is not yet triggered. After 15 mts i got email about tablespace 100% full.
I want to get notified as soon as my session gets suspended?

vreddy wrote:
I have resumable timeout set to 15 mts. Wanted to get notified when ever session gets suspended due to space issue.
I have defined new notification rule in OEM 10g, In metrics section i have choosen "Session Suspended by Tablespace Limitation" and made the rule PUBLIC.
The issue is, i have generated scenario where session is suspended due to lack of space, In OEM database page i could see the Alert, but the mail
is not yet triggered. After 15 mts i got email about tablespace 100% full.
I want to get notified as soon as my session gets suspended?Impossible to guarantee. There is inherent, uncontrollable latency in email routing.
To paraphrase an old marketing tag for a shipping company:
"Email. When it positivelly, absolutely doesnt' matter when it arrives."

Error while creating MV replication group object

Hi,
I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
OEM error
This error while creating M.V. rep. group object
There is a table or view named SCOTT.EMP.
It must be dropped before a materialized view can be created.
In SQLPLUS
SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
Connected.
SQL>
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'SCOTT',
4 sname => 'KARTHIK',
5 oname => 'emp_mv',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema KARTHIK does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
Please not already I have created KARTHIK schema.

Arthik,
I think I know what may have happened.
As I can see you are trying to create support for an updateable materialized view.
You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
From the code you have shown, I bet the owner of table EMP is SCOTT.
From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
Please check the documentation at the link below
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
I'll skip some of the steps that I used to create the replication environment.
I have two databases, DB1.world and DB2.world
On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
SQL> conn scott/*****@DB2.world
Connected.
SQL>create materialized view log on EMP with primary key;
Materialized view log created.
SQL>
SQL>conn repadmin/*****@DB2.world
Connected.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3         gname => 'GROUPA',
4         qualifier => '',
5         group_comment => '');
6*   END;
PL/SQL procedure successfully completed.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3         gname => 'GROUPA',
4         type => 'TABLE',
5         oname => 'EMP',
6         sname => 'SCOTT',
7         copy_rows => TRUE,
8         use_existing_object => TRUE);
9*   END;
10 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2       DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
3         sname => 'SCOTT',
4         oname => 'EMP',
5         type => 'TABLE',
6         min_communication => TRUE);
7    END;
8 /
PL/SQL procedure successfully completed.
SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
PL/SQL procedure successfully completed.
SQL> select status from dba_repgroup;
STATUS
NORMAL                                                                          Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
SQL>conn mviewadmin/****@DB1.world
Connected.
SQL>   BEGIN
2       DBMS_REFRESH.MAKE(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => '',
5         next_date => SYSDATE,
6         interval => '/*1:Hr*/ sysdate + 1/24',
7         push_deferred_rpc => TRUE,
8         refresh_after_errors => TRUE,
9         parallelism => 1);
10    END;
11 /
PL/SQL procedure successfully completed.
SQL>   BEGIN
3       DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
5         gname => 'GROUPA',
7         master => 'DB2.wolrd',
9         propagation_mode => 'ASYNCHRONOUS');
11    END;
12 /
PL/SQL procedure successfully completed.
SQL>conn myuser/*****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'MYUSER.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'MYUSER',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema MYUSER does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 3 I reproduced exactly the same error message.
So the problem is clearly in the schema name that owns the materialized view.
Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
SQL>conn scott/****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'SCOTT.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'SCOTT',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
-- Mihajlo
Message was edited by:
tekicora

Getting error while importing a table partition

Hi,
I am trying to import a table partition from OEM and occurred with following error:
Job IMPORT000042 has been reopened at Friday, 13 June, 2008 14:44
Restarting "SYSMAN"."IMPORT000042":
Processing object type TABLE_EXPORT/TABLE/TBL_TABLE_DATA/TABLE/TABLE_DATA
ORA-31693: Table data object "SCOTT"."CONTAINER":"PARTITION_5" failed to load/unload and is being skipped due to error:
ORA-06502: PL/SQL: numeric or value error
LPX-00210: expected '<' instead of 'n'
Job "SYSMAN"."IMPORT000042" completed with 1 error(s) at 14:44
Job state: COMPLETED
Thanks

What's the source and target database Oracle version?
What's the character set of both databases?

OEM GC 10.2.0.3.0 Prereqchecker Session ended due to error ...

Similar Messages

Maybe you are looking for