OEM notification

I have resumable timeout set to 15 mts. Wanted to get notified when ever session gets suspended due to space issue.
I have defined new notification rule in OEM 10g, In metrics section i have choosen "Session Suspended by Tablespace Limitation" and made the rule PUBLIC.
The issue is, i have generated scenario where session is suspended due to lack of space, In OEM database page i could see the Alert, but the mail
is not yet triggered. After 15 mts i got email about tablespace 100% full.
I want to get notified as soon as my session gets suspended?

vreddy wrote:
I have resumable timeout set to 15 mts. Wanted to get notified when ever session gets suspended due to space issue.
I have defined new notification rule in OEM 10g, In metrics section i have choosen "Session Suspended by Tablespace Limitation" and made the rule PUBLIC.
The issue is, i have generated scenario where session is suspended due to lack of space, In OEM database page i could see the Alert, but the mail
is not yet triggered. After 15 mts i got email about tablespace 100% full.
I want to get notified as soon as my session gets suspended?Impossible to guarantee. There is inherent, uncontrollable latency in email routing.
To paraphrase an old marketing tag for a shipping company:
"Email. When it positivelly, absolutely doesnt' matter when it arrives."

Similar Messages

OEM notification doesn't send mail

1. I have Notifications Method setup, tested it and working fine.
2. I also have email specified on Preferences --> email addresses and also tested and worked fine.
3. Rules was ALL subscribed to send email.
so when I did a test to shutdown one of the service down, OEM never trigger an email.
What am I missing here?
thanks all

Hi
Follow this workaround
Login to grid console with sysman user and press Configuration In the section of Administrators press create , and write the necessary information (remember grant the SUPERADMINISTRATOR privilege to this account).
Disconnect from GC and reconect with the new user. Go to preferences and in this section add the mail address and edit the schedule planification and introduce the mail address in all hours. Save the changes.
Press Notification Rules and press Create
Select the database instance like target and select a specified oracle database target. Ensure that you can testing with this database.
In the metrics tab press add button and select a metric of example ( blocking session count ) and enable the critical and clear button. Save the changes and exit.
Go to the GC console --- Targets --- Databases . Select the target database that you have selected in the rule.
In the home page go down and press Metric and Policiy settings . In the checkbox select all metrics. Then all metrics with and without values appear. Find the blocking session count and in the critical theshold write 0, the warning must be empty and the relacional operator > .
warning critical
Blocking session count > 0 Every 1 minutes
In the collect time change to every 1 minute . Press OK to apply the changes in the repository.
Open 2 sessions of sqlplus
first session
CREATE TABLE LOCK_EXAMPLE ( C1 NUMBER, c2 number);
table created
LOCK TABLE LOCK_EXAMPLE;
iN THE SECOND SESSION run this
INSERT INTO LOCK_EXAMPLE VALUES (555,555);
IN THIS MOMENT THE SECOND SESSION IS WAITING FOR FIRST SESSION. After two or three minutes go to GC console and select the database. A critical alert must be appear with the message: Blocking session count value 1
Then in your mail , you must have received the ALERT
rEGARDS

OEM Notification Alerts

I had created new database and while creating I asked to configure it with Grid Control.
I set up notification alerts to send alert when database/listener is down .When i shut down database or listener,I am not receiving any alerts.Please help me.
I also clicked test button in the Grid Control and it is working fine as i am gettting email i.e test mai. but not geiing database/listener down message.
Please anybody reply.
Thanks in advance.
Regards,
DBA

So under Preferences -> Notification Rules -> Listener Availability it has checked to send send email?
If so find the Listener target and look at its Metric and Policy settings (at the bottom) and ensure on the metric tab it has a Critical Threshold of Down.

OEM Notification configuration in oracle11g R2

Hi
can anybody please explain me how to configure notification (email alert)system in oracle 11g r2 with threshold values.
Regards
Phani Kumar

change the /etc/hosts entry should be like below
127.0.0.1 localhost.localdomain localhostplease check all the Prerequisites
and also check runcluvfy.sh
Edited by: rajeysh on Aug 5, 2011 3:36 PM

Oracle EM 10g - Running an OS Command

Hi,
While running an OS command thru oem notification rules i get the following error
Error calling c:/ws/message.bat: Timeout occurred running c:/ws/message.bat
in the alert details message.
Is there any way to solve this?

Check my response to your related posting here:
Re: problem when trying to execute OS Command in Notification Method

How to extend notification method to os command in OEM

Hi All,
I am using OEM 12c R1 and want to use an os command as notification method. I wrote a shell script and placed the script on the machine where I have installed OEM. Now I provided the script with its absolute path in the text field of os command and tried creating a new notification method however while testing I got the following error
"Test failed: Error calling /<source_folder>/alertlog.sh: Cannot run program "/<source_folder>/alertlog.sh": java.io.IOException: error=2, No such file or directory (<host_name>:<port>_Management_Service)"
Can anyone please tell me where I should keep the os script to get read and run by oms? or what could be the correct steps of extending nitification methos as os command?
Thanks in Advance!!

From:
http://docs.oracle.com/cd/E25054_01/doc.1111/e24473/notification.htm#autoId12
"You must deploy the OS Command or Script on each Management Service host machine that connects to the Management Repository. The OS Command is run as the user who started the Management Service.
The OS Command or Script should be deployed on the same location on each Management Service host machine. The OS Command should be an absolute path, for example, /u1/bin/logSeverity.sh. The command is run by the user who started the Management Service."

OEM Email Notification:: "Relay access denied " Error

Hello all,
The IP address of the OEM grid server was changed very recently.
Though everythin works perfectly after that, 'am not getting any mail notifications that i used to get before.
The Outgoing Mail (SMTP) Server ip is the same as it was previously
In OEM, Setup => Notification Methods =>Test Mail Servers ::gives the below errors.
<smtp ip addr>: Test failed with message: "Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 554 <[email protected]>: Relay access denied "
Is there anywhere i need to make any change??
TIA,
J J

Well, This was coz dat the "relaying" for the new ip address was not enabled in the mail server.
J J

Need help with sending email notifications via OEM

Hi Folks,
Objective: To setup email notification if the listener or the database instance goes down
Version: 10 g Rel 2
I have setup the email from OEM. I have verified the configuration by successfully sending myself test emails.
I have configured the schedule (7 days a week, from 1 A.M to 11 P.M)
I have also configured the out-of-the package alerts so that I will be notified if the listener goes down
However, once I manually stop the listener, no email is sent out?
Can somebody spot any obvious steps that I might have missed? Or if somebody can suggest any debugging steps that might help to resolve the issue ?
Thanks in advance.
rogers42

Hi Roger
Ok, tell me
1. You have a user like DBA and configurate this count for recive email?
2. When You try send email from Console You recive this email? Your prove server email
You should recive this mensagge
Este mensaje de correo electrónico de prueba de Oracle Enterprise Manager indica la configuración correcta de la dirección de correo electrónico y del servidor de correo.

OEM Not sending email notifications..

Hello All,
I have setup all the parameters required for email notifications in My OEM Database Control..
I have even tested my by pressing test mail while configuring outgoing SMTP server..
Even marked to send an email in all the rules i needed..
So everything seems like i have setup all the parameters and even when i click on one alert and its details it shows *"The following notifications will be sent: 1 e-mail messages, 0 SNMP traps, 0 PL/SQL procedures, and 0 OS Commands."*
And as i expect it should show one more entry the email has been send to [email protected] but even after waiting for long time OEM is no sending the email specified in notication schedule..
What might be the reason for the same.. Any help would be great..
Oracle DB Version : 10.2.0.1
OEM : OEM Db control
Thanks

It might be one of the fllowing reasons
1.SYSMAN jobs are broken, re-enalbe the same.
2.Check Preferences--> Notification Rules--> And make sure all Rules are checked for Send Email.
3.Check dbms jobs are running under sysman schema on the repository.
Also see the below doc
http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/notification.htm#CACJCDHD
Hope this helps.
Regards,
Satishbabu Gunukula
Click here for [How to add and remove OCR|http://oracleracexpert.blogspot.com/2009/09/how-to-add-and-remove-ocr-oracle.html]
Click here to [Improve RMAN Incremental backup Performance|http://oracleracexpert.blogspot.com/2009/09/block-change-tracking-in-oracle-10g.html]
http://oracleracexpert.blogspot.com

Notification rule of type "system" in OEM 11g

Having used OEM 10g I'm now using 11g. When I create a new notification rule one of the options is to use a type of system, as I have a system defined I thought "oh goody that will be useful !" unfortunately not as there is no option to add metrics policies jobs etc and so we get "Availability, Metrics, Policies, Jobs - No availability, metrics, policies, or jobs selected." and cannot create this type of rule.
What is the point of having the option to create a notification rule of type system ?
Ahh I worked it out each notification rule must be of a specific type but can be applied to all targets of that type within a specified system.
Is there a white paper that talks about best proctices for monitoring a huge system so that alerts and notifications are consistent and we dont need a small army of administrators trying to keep everything in step ?.
Edited by: Robin on Mar 31, 2011 3:39 PM

Hi Krrrishna,
>> And when user clicks back button here, i want to navigate the user to Home page
Per my understanding, you are using the incorrect way to handle the hardware back button click. Try to add the following code snippet to your home page.
In windows phone 8.1 runtime app,
HardwareButtons.BackPressed += HardwareButtons_BackPressed;
void HardwareButtons_BackPressed(object sender, BackPressedEventArgs e)
e.Handled = true;
Frame.Navigate(typeof(yourhomepage));
In windows phone 8 app, handle OnBackKeyPress event in Message.xaml like the following.
protected override void OnBackKeyPress(System.ComponentModel.CancelEventArgs e)
e.Cancel = true;
NavigationService.Navigate(new Uri("yourhomepage", UriKind.Relative));
Please try it and let me know the result. If this not help, please post more information about your scenario.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Notification from oem 11g.2

hi all ,
i install db 11g.2 on enterprise linux version 6 during the setup i active the email notification
please see what oem send me ???what i do ???
Target Name=IT-RBT:3938
Target Type=Agent
Host=IT-RBT
Metric=Status
Timestamp=Jan 10, 2012 11:00:36 AM AST
Severity=Unreachable Start
Message=Agent has stopped monitoring. The following errors are reported : COLL_DISABLED.
Notification Rule Name=Agents Unreachable
Notification Rule Owner=SYSMAN
Notification Count=1
what is wrong of this ???
MANY THANKS

Check the agent log files
You can also read the following thread. It is for 10gR2
Re: The following errors are reported : COLL_DISABLED.
and also this :
enterprise manager: agent unreachable
Edited by: jazz81 on 10-Jan-2012 10:21

OEM 11g The Notification Schedule; Edit Schedule Definition buttons does not work

When I go to the Edit Schedule Definition in OEM 11g and check the Days of Week schedule and try to hit the Batch-Fill-in button or any of the other buttons, nothing happens. It's as if the buttons
are not working. I could really use some help on this.

Hi,
Are you using EM 11g Dbcontrol
Is yes then we have a known issue marked in BUG 13907733
Refer to below doc and apply the recommended patch
Dbcontrol Email Notifications Are not received for metric alerts with a valid Notification Rule (Doc ID 1927762.1)
Regards,
Rahul

In 12c OEM where can I set the notification when the Agent is down.

Hello Experts,
In 10g OEM environment , while creating the notification rule , we have a tab "availablity" which has the option to choose for the Agent target availability.
But while creating a rule in the 12c , I didn't find that kind of option. So, how can I enable my self to alerted for the agent nonavailability.
Thanks,
Naveen kumar

EM12c has an entirely different set up for notifications. You would configure this under the Setup menu by selecting Incidents, followed by Incident Rules.
Within Incident Rules you should see a couple default Oracle-provided incident rulesets. I created an additional ruleset (priority 3, after the default rulesets) that contains various rules, each rule matching a type of incident for which I want to receive notification.
Specifically for the "agent down" situation, my rule is set up as:
Target Type is Agent
Status in (Closed; New)
Category is Availability
Then you specify actions to occur when the rule gets triggered -- I've specified the action to email my EM administrator login, which is configured with my email address.

OEM Multiple Notification rules and schedules

Hi,
We have OEM 10.2.0.4 installed in our environment.
As a DBA i get the notification for all kind of alerts (warnings/critical).
My manager wants to see only the critical alerts to be send to him. How can this be implemented.
I created custom notification rules just for critical alerts. How can i now have a separate schedule just for these new notification rules.
When I go to the schedule page. It does not seems to have a 'create' button so that I can create multiple schedules and associate different schedule to different rules etc...
Any help in this regard would be appreciated.
Thanks.

Thanks for you reply.
Do you mean I need to create a new Administrator user?
Has anybody in this forum have implemented this? Please share the steps you have followed.
Thanks.

OEM Grid Alert Notification

Hello,
We would like to configure our OEM grid alert notification in such a way that only the DBAs received alerts pertaining to database issues such as tablespace 90% full. With our current settings, all the people on the alert notification list received alerts related to database issues. How can we choose who will receive what notifications? Thanks!

The way the product is designed ou would create multiple administrators who would then each subscribe to appropriate alerts. It sounds like you are using a single administrator and/or set of notifications for everyone.
Niall Litchfield
http://www.orawin.info/

OEM notification

Similar Messages

Maybe you are looking for