OEPE causes Eclipse Kepler to start with wrong workspace, overrides Eclipse's workspace configuration

I'm a new OEPE user, and found that after installing it, Eclipse (Kepler) now starts up with the wrong workspace every time. I have to explicitly do File > Switch Workspace... to get Eclipse to restart with the correct workspace. Also, the workspace I want to use is the only one listed in the Workspaces preferences panel (Window > Preferences > General > Startup and Shutdown > Workspaces). So I can't figure out why Eclipse is using the wrong workspace, and why it's even finding this wrong one.
I found that many other users of OEPE with Kepler are having this same problem:
Eclipse Community Forums: Eclipse Platform &raquo; Kepler: On start up, I no longer get prompted for workspace locat…
And this sounds curiously like this old problem reported right here on the OTN Community site:
https://forums.oracle.com/thread/2191740
Any suggestions for how to get around this? I assume this is a bug, but don't know the correct process for reporting OEPE bugs.

77e559c0-cd28-48cd-916f-3f755e9683b5 wrote:
Hi.
I suspect that some action by the OEPE code somehow modifies the OSGi Cache so that it no longer asks you what workspace you'd like to use (and forces usage of the workspace in top user directory.) I found that if you put in "-clean" in your eclipse.ini, then you get asked what workspace you'd like to use. This flag clears out the OSGi cache (hence my theory that it is this cache that is messed up)
That said, there are arguments for not doing this all the time. See this discussion: java - How to run eclipse in clean mode? and what happens if we do so? - Stack Overflow
Finally, I suspect you have another workspace on your system now. Presuming you are on a PC, go to your user dir - I'd wager there is a "workspace" dir there now. That is where OEPE wants to work.
Good Luck!
OEPE should be able to work with any workspace; it has in the past! If a specific workspace is required with this release, that is a step backward in my opinion. That said, if that is the direction of the product, so be it. I find it hard to believe that is the direction of the product, however!

Similar Messages

IPhone 5s and iTunes match started with wrong apple i

Hello,
Yesterday I started with iTunes match with one of my apple id's (the one I mostly use for shopping)
UnfortunateIy, while reading the instructions I didn't quite understand that it would not be available to my other id (apple id for iCloud)
My macbook, windows pc and ipad are synced with the correct apple id (for iCloud)
Now my iphone is not synced because I started iTunes match with another apple id of mine....!
As I realise what happened I think that a 90 day period is absurd!!! in order to get my device free to sync with my choice apple id
Because of this situation I have bought de iTunes match twice.
Can you help me with the two following?
1. Is it possible to cancel de purchase for apple id: please?
2. And to have my iPhone 5s available for de iTunes match
Thank you for your help.
Regards,
Mari Barneveld
<E-mails Edited by Host>

Hello mary.bee
To resolve the issue, you will need to report the issue to the iTunes Store. As for the 90 days the article below will have some information about associating your Apple ID with other devices.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Regards,
-Norm G.

IP Helper Service causes Session "" failed to start with the following error: 0xC000000D

I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
Does anyone know how to fix this issue? I know I could disable the service but I prefer not to do it.
Thanks
Alberto

Hi,
IP Helper (service name 'iphlpsvc') is apparently designed to improve a Windows PC's support for IPv6 network protocol.
I suggest you try enable the dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iphelper.exe]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Once the error appears again, please find the crashdump file under c:\.
Regards,
Kelvin hsu
TechNet Community Support

JWS Starts with wrong JRE

If I start my app while the 'Keep temporary files on my computer' option is checked it starts with J2SE6. If I uncheck it, then it correctly starts with 1.4.2_13
This is the line in my jnlp <j2se version="1.4.2_13*" java-vm-args="-Xmx512M -java.native.libs=c:\techtrade\nativelibs" href="http://java
.sun.com/products/autodl/j2se"/>
I deleted everything in the cachedir, deleted the app from the viewer etc, but unless I force it to not cache anything at all it will start with j2se6. Any ideas on why ?

you would need to specify:
<j2se version="1.5.0*&1.5.0_08+" href="..."/>
to specify a 1.5.0 family that is also at least
1.5.0_08
(note this syntax in invalid under Java Web Start
1.4.2 or earlier, you you may also want:
<jnlp spec="1.5.0+"..Thanks, that is handy to know. (For anyone that
is confused by my sudden appearance in this
thread, I will simply add that I was interested in this
problem, but had no immediate solution..)
But could I clarify something..
Assuming the application required a particular
minimum micro-version of 1.4 (or 1.3 ..), would it
work to declare the spec. as 1.5.0+, but still add
the 1.4 microversion request?
What I am thinking is that JWS will download the
Java 5(+) JRE based on the spec attribute(?), then
thereafter be able to load the application using the
correct 1.4 variant. Would that work?

Flash Builder 4.7 with Eclipse Kepler

Hi,
I'm trying to install the Adobe Flash Player 4.7 with Eclipse Kepler. I'm using the Adobe Flash Builder 4.7 Plugin-in Utility.
It seems that this version of the Builder is not compatible with the Eclipse Kepler but only with Eclipse Indigo or Eclipse Juno
Do you have any idea of how to do use Adobe Flash Player 4.7 with Eclipse Kepler?
A new version of the Builder is planned for that?
Thanks

So, i try this and more...
1° Download my version:
2° CleanUp all registry for "Extension Builder", "ExtensionBuilder", "Extension_Builder", "Flash Builder", "FlashBuilder" and "Flash_Builder", after this, CCleaner...
3° Install, error:
4° Link file? Interesting, look in depth... Try install manually:
5° Works, now install Extension Builder 2.1 and... Error! Look the guy "link file" here, is name of a class in *.as too big, why you do this adobe! O_O
6° Ok, maybe work, because i never use this classes, so look more if i have serial number, oh! I Have serial number for my Extension Builder 2.1! @_@
7° A light at the end of the tunnel! Insert in Flash Builder and...
You just fu** kidding of me...

How to create a DN that starts with cn instead of uid

I installed the new version of the directory server 5.0 and converted all dn's. All my DN's starts with the cn, but we I now enter new entries using the iPlanet console they all start with uid again. How can I configure the console so that when I enter a new entry, his dn starts with the cn instead of with the dn.
THX

I had the same problem. To fix it, I performed the following steps:
* Open the Directory Server
* Select the Directory tab
* Select NetscapeRoot
* Select the domain
* Select Global Preferences
* Select Common from the right-hand panel
* Change nsuniqueattribute and nsuserrdncomponent from uid to cn
* Save the changes
* Logout of Console
* Re-start the Directory Server and the Administration Server
This worked for me.
As a note, when you look at the Advanced properties before you complete adding the user, uid will still be shown as the RDN. Ignore this. After you complete adding the user, view the Advanced properties again. The RDN will use cn.
Hope this helps.

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

OEPE Causes Eclipse Not to Prompt for Workspace

After install the OEPE 1.1.1.7, I am no longer prompted for the workspace to use on startup. The prompt for workspace setting is checked. If I uninstall the plugin, I am then prompted for the workspace. Any ideas on how to get eclipse to prompt for the workspace even if OEPE is installed. If I reinstall the plugin, I am no longer prompted for the workspace.
Thanks!

Before dropping 1.1.1.6 into the dropins directory, I was using the update method. Now, I do use Genuitec's Pulse to manage my eclipse installation. I would no think that would cause the difference in our findings, but who knows. I seem to remember--I apologize for not remembering clearly!--that 1.1.1.6 worked event with Pulse, yet I can not verify as I can not seem to pull a previous version from the OEPE update site.
I did see some hits in Google that seemed to suggest that the install location was being set to the default somewhere in a plugin that wasbeing loaded early in the chain. Unfortunately, I am not in a position to delve into this to debug the issue. When I get freed up a bit, perhaps I will be able to research more.

Hello, starting with today I have a strange problem: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file.

Started new computer up with wrong itunes account how do i change it

Started new imac with wrong itune account. How do i change it?

Lunch iTunes - go to the Home page of the iTunes Store and select 'account' - you will get a dialog and you can log into your account.
MJ

"HTTPS hostname wrong" for a hostname starts with a number

Does anyone know about why HttpsClient throws the error for a hostname starts with a number. I have no problem with other hostname but only for the hostname starts with a number. The certificate works fine with Browser. I am sure the hostname in the certificate and in the request are exactly the same.
I know how to skip the hostname verification, but I don't want to do that for security concern.
Can sun develpoer shed some light how to verify the hostname in HttpsClient?
java.io.IOException: HTTPS hostname wrong: should be
<1company.mydomain.com>
at sun.net.www.protocol.https.HttpsClient.b(DashoA6275)
at sun.net.www.protocol.https.HttpsClient.afterConnect(DashoA6275)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(DashoA6275)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:574)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(DashoA6275)
at java.net.URL.openStream(URL.java:960)
Thanks
Al8079

I looked at the RFCs you mention, and they do seem to indicate that host/domain names cannot start with digits...however if you look at RFC 1123 closely it says:
RFC1123 APPLICATIONS LAYER -- GENERAL October 1989
2. GENERAL ISSUES
This section contains general requirements that may be applicable to
all application-layer protocols.
2.1 Host Names and Numbers
The syntax of a legal Internet host name was specified in RFC-952
[DNS:4]. One aspect of host name syntax is hereby changed: the
restriction on the first character is relaxed to allow either a
letter or a digit. Host software MUST support this more liberal
syntax.
Host software MUST handle host names of up to 63 characters and
SHOULD handle host names of up to 255 characters.

Getting started with ATG and Eclipse

Hi,
I am newbie in ATG web commerce. I am doing some R&D how to integrate ATG with eclipse JBoss and oracle. I searched on Google, there is one very interesting topic about getting started with atg, jboss, oracle :
http://atgdeveloper.wordpress.com/2009/04/19/getting-started-with-atg-jboss-and-oracle
It is very helpful to me but there is one problem what are the requirements of eclipse to integrate it with ATG. Is there any ATG plugin, which I can download all the plugin for eclipse and please can anyone help me if there is any ATG configuration documentation available, please share link or document(if there is complete step-by-step documentation available).
I will greatly thankful to you. Very very thanks in advance.
Thanks,
Manveer
Edited by: msingh on Nov 9, 2011 3:37 AM
Edited by: msingh on Nov 9, 2011 3:38 AM

Hi GarethR,
I have a looked on ATGInstallationGuide.pdf, which url it shows is not working http://www.atg.com/eclipse. I think the url for ATG plugin has been changed now but I didn't found that url on google. Can you please help me to get correct url.
When I try to use this url using eclipse update manager. It shows me no features available for this site.
Thanks,
Manveer

Got started on wrong foot with Revel

I got started on the wrong foot with Revel. I thought I was logging into my old Photoshop account so I ended up creating a new Revel account with and old email address and password that I don't want to use. I then uploaded about 2000 pictures. Not realizing that in "Track" view the pictures scroll left to right I couldn't see all my pictures so I uploaded them again thinking that they didn't upload. I now have over 4000 pictures, half of them doubles. How do I fix this? Am I better off asking for the account to be deleted and start over? I have Elements 10. Does Revel work with Elements 12? Am I better off purchasing Elements 12 and working through it?
Dan

Hi Dan
You can login with your current email address at:
https://www.adobe.com/account/account-information.html
and make changes to your profile here, change email address, password, screen name, etc.
Mobile albums are albums that show in elements 12 but are also connected to the files in Revel. If you delete them or add more from one place, it does the same in the other. Here are som links you might like to see on elements/revel.
I think what happened is that the photos from iphoto were a lower resolution than the others you uploaded, so they look the same but may be in fact different. The recommended way to upload from iphoto is listed below. Is this you you uploaded or did you drag and drop? You could export the two identical looking photos and check the sizes if you want to confirm this.
Import to Revel from iPhoto:
Open Adobe Revel on your Mac and click the + button.
In the Import Photos dialog box, click Photos in the Media area of the list on the left. Select iPhoto, and then select the photos you want to import.
Click Import To Library.
Getting Started with Revel:
http://www.adobe.com/support/revel/gettingstarted/revel_gs.html
Revel Forum FAQ's:
http://forums.adobe.com/community/revel/faq
ELEMENTS 12
http://helpx.adobe.com/photoshop-elements/using/whats-new.html
http://helpx.adobe.com/pdf/elements-organizer_reference.pdf
http://tv.adobe.com/show/learn-photoshop-elements-12/
http://tv.adobe.com/watch/learn-photoshop-elements-12/setting-up-your-mobile-albums/
http://helpx.adobe.com/photoshop-elements/topics/getting-started-tutorials.html
http://tv.adobe.com/show/learn-photoshop-elements-12/
http://helpx.adobe.com/pdf/photoshop-elements_reference.pdf
http://helpx.adobe.com/photoshop-elements/topics/getting-started-tutorials.html

Moving cursor over any http pointer causes displayed pop ups to flicker on/off. started with v18.0

First noticed when I tried to save bookmarks. Started with Version 18 update.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

Satellite Pro A300-28R - Windows starts up with wrong display resolution

OK so I have a Toshiba Satellite Pro A300-28R with Windows 7 64 bit and an ATI Mobility Radeon 3470 HD graphics card.
I recently connected my laptop to a TV via the S-video connection. This worked fine. The problem is that ever since then every time I start my laptop Windows starts with the S-video display resolution of 600x800.
I have tried changing the settings in both Control Panel and using the ATI CCC, having both selected and applied these settings but each time Windows starts now it boots with the above display resolution.
Following this I have also uninstalled and reinstalled both my display driver and the Toshiba Value Added package but the same problem persists. I have searched with Google about this problem and haven't been able to find anything useful.
Any help would be greatly appreciated.

Hi thanks for your responses! Originally I used the method of closing the laptop screen while connected to the s-video and then opening the screen and logging into Windows. This then automatically detects the display and changes to that output. To get out of this you can do either do the reverse or pres Fn+ F5 to undo. This has worked perfectly for me before with VGA connections. Its only since connecting to s-video that now no matter what, every time the laptop starts up even when it is not connected to any external display, it loads with the resolution 800x600. This is not the first time I have used s-video, but it is the first time I have had this result after doing it.
Interestingly if I change to the appropriate resolution and do a restart. The system restarts and loads to the logon screen and then into Windows in the resolution I specified before the restart but then after fully loading Windows it then changes to 800x600. It is as if the laptop is detecting that there is something connected to the s-video when there is not. I have read a fix for this whereby you can go into the system registry and turn off the feature for automatically detecting displays but I use external displays frequently and this is not a satisfactory solution. This worked perfectly before.

OEPE causes Eclipse Kepler to start with wrong workspace, overrides Eclipse's workspace configuration

Similar Messages

Maybe you are looking for