Off the topic

this is not related to java directly, but am hoping there might be some java developers from the financial industry here.
I have a job offer from a major investment bank in the "reference data" group as a java developer. However my objective is to gain some experience in FIXED INCOME, DERIVATIVES or EQUITY. I am not sure if these technologies or any related technologies would be involved in this group. or to make it simple would working with a reference data group gain you any such experience.
I am hoping that somebody over here would be able to advise.

I have a job offer from a major investment bank in
the "reference data" group as a java developer.
However my objective is to gain some experience in
FIXED INCOME, DERIVATIVES or EQUITY. I am not sure
if these technologies or any related technologies
would be involved in this group. So to make it simple: you had a job interview, where you could have asked somebody from the company in question whether you would be getting that experience if you accepted the job. But no. You chose to ask a group of total strangers who know nothing about the company who offered you the job. That doesn't sound very sensible to me.
Or maybe I am misinterpreting your question.

Similar Messages

Off the topic (Again!!!)

Yo all
I'm posting this here because the other forums aren't much help at all...
I'm running queries on an Informix database, I've got the JDBC up and running but i cant seem to set the isolation level to dirty read
I've tried running it in the same query and it throws and SQL exception
I've also tried running it as a separate query just to try it out but that doesnt work either?!
Has anybody got experience in Informix and Java integration?
thanks
mike

But... it's a reality to want to use these plug-ins
fairly early in the game, as you suggested.
So my solution, for now, is to do an offline bounce,
of say, the drums, with all their delicious UAD
plug-ins activated.
I then save the song under a different title, such as
"Song Title- For Recording".
I then import the newly bounced stereo drum submix
into this song, deactivate the buss and Aux plug-ins,
and turn delay compensation back to off, or Audio
Instruments and tracks."
I can now record vocals, guitars, anything live,
without the worry of it being recorded in any other
spot other then where it was intended!
When those new live tracks are finished, and use the
Export feature to export continuous regions, and
bring it back into the "master" song file.
I realize this might not be an efficient way of
working for some, but it has proven very reliable,
and easy enough to do, at least for the way I like to
work.
The problem with this method, especially if you work to picture, is that all the resultant audio files will have some "digital null" as Apple calls it, blank audio to me, at the beginning of each track and so if you bring in the auido files they will not be out of syne with the picture unless you trim them all.
I really hope Apple fixes this soon.
Logic Certified Trainer
www.jayasher.com

Bit off the topic!

Yo all
Its the first time i've ever seen this, can any of you help me please!
I have an apache http server running, and i've copied an applet accross to the server with its html file(obviously!), i can connect to the java server through the applet 100% from the local machine, but when i go accross to the windows machine with jre 1.4 installed, i cant seem to connect! there is no firewall software running and i can telnet into the port,(it used to work)and now i get the following error:
java.net.SocketException: Connection reset by peer: JVM_recv in socket input stream read
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(Unknown Source)
at java.net.SocketInputStream.read(Unknown Source)
at java.io.ObjectInputStream$PeekInputStream.peek(Unknown Source)
at java.io.ObjectInputStream$BlockDataInputStream.peek(Unknown Source)
at java.io.ObjectInputStream$BlockDataInputStream.peekByte(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at iROClntComms.readObject(iROClntComms.java:169)
at iROClntComms.MessageLoop(iROClntComms.java:226)
at iROClntComms.loginUser(iROClntComms.java:189)
at iROCLoginScreen.verifyUser(iROCLoginScreen.java:129)
at iROCLoginScreen.login(iROCLoginScreen.java:98)
at iROCLoginScreen.keyTyped(iROCLoginScreen.java:122)
at java.awt.Component.processKeyEvent(Unknown Source)
at javax.swing.JComponent.processKeyEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(Unknown Source)
at java.net.SocketOutputStream.write(Unknown Source)
at java.io.ObjectOutputStream$BlockDataOutputStream.drain(Unknown Source)
at java.io.ObjectOutputStream$BlockDataOutputStream.setBlockDataMode(Unknown Source)
at java.io.ObjectOutputStream.writeNonProxyDesc(Unknown Source)
at java.io.ObjectOutputStream.writeClassDesc(Unknown Source)
at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source)
at java.io.ObjectOutputStream.writeObject0(Unknown Source)
at java.io.ObjectOutputStream.writeFatalException(Unknown Source)
at java.io.ObjectOutputStream.writeObject(Unknown Source)
at iROClntComms.writeObject(iROClntComms.java:157)
at iROClntComms.MessageLoop(iROClntComms.java:224)
at iROClntComms.loginUser(iROClntComms.java:189)
at iROCLoginScreen.verifyUser(iROCLoginScreen.java:129)
at iROCLoginScreen.login(iROCLoginScreen.java:98)
at iROCLoginScreen.keyTyped(iROCLoginScreen.java:122)
at java.awt.Component.processKeyEvent(Unknown Source)
at javax.swing.JComponent.processKeyEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
any ideas would be greatly appreciated

here is where you are sending the object through the sockets
public synchronized boolean MessageLoop(Object sendObject) {
boolean returnResult = false;
resultObject = null;
iROCMessage inMessage;
iROCMessage outMessage = new iROCMessage();
int retries = 0;
while (retries < MAX_RETRIES) {
try {
switch (currentState) {
case iROCStateDefs.ROC_INITIATE_STATE:
control.iROCDebugLog("CONNECT STATE");
iROCMessage message = new iROCMessage();
iROCLoginInfo loginInfo = new iROCLoginInfo();
loginInfo.setName(this.name);
loginInfo.setPassword(this.password);
message.setObject(loginInfo);
message.setCommand(iROCMessageDefs.ROC_CONNECT);
/* Send the information to the server */
writeObject(message);
control.iROCDebugLog("Reading the server object");
Object result = readObject();
control.iROCDebugLog("Testing server response");
if (((iROCMessage)result).getCommand() == iROCMessageDefs.ROC_ACK) {
iROCLoginInfo loginStuff = (iROCLoginInfo)((iROCMessage)result).getObject();
if(loginStuff.getAdminRights()){
iROCMainConsole.adminItem.setEnabled(true);
iROCMainConsole.controlMenu.setEnabled(true);
}else{
iROCMainConsole.adminItem.setEnabled(false);
iROCMainConsole.controlMenu.setEnabled(false);
control.iROCDebugLog("Account info authorised...");
currentState = iROCStateDefs.ROC_REQUEST_COMMAND_STATE;
returnResult = true;
} else {
control.iROCDebugLog("Account failed...");
break;
case iROCStateDefs.ROC_REQUEST_COMMAND_STATE:
/**iROCMainPanel.setDescription("Sending Request to server...");*/
//iROCStatsMessage sendingObject = (iROCStatsMessage) sendObject;
//receiveRequestID = sendingObject.getObjectType();
control.iROCNotifyState("Sending Request to server...");
control.iROCDebugLog("REQUEST COMMAND STATE");
outMessage.setCommand(iROCMessageDefs.ROC_COMMAND);
outMessage.setMessage(this.request);
outMessage.setObject(sendObject);
writeObject(outMessage);
control.iROCNotifyState("Request Sent...");
inMessage = (iROCMessage)readObject();
if (inMessage.getCommand() == iROCMessageDefs.ROC_ACK) {
currentState = iROCStateDefs.ROC_RECEIVE_RESULT_STATE;
if (MessageLoop(null) == true) //Call once more to get the result
returnResult = true;
} else {
control.iROCLog(">>Server Denied Request : ");
break;
case iROCStateDefs.ROC_RECEIVE_RESULT_STATE:
control.iROCNotifyState("Receiving data from server...");
control.iROCDebugLog("RECEIVE RESULT STATE");
inMessage = (iROCMessage)readObject();
if (inMessage.getCommand() == iROCMessageDefs.ROC_RESULT) {
resultObject = inMessage.getObject();
outMessage.setCommand(iROCMessageDefs.ROC_ACK);
writeObject(outMessage);
currentState = iROCStateDefs.ROC_REQUEST_COMMAND_STATE;
returnResult = true;
control.iROCNotifyState("Data received...");
break;
case iROCStateDefs.ROC_TERMINATE_STATE:
control.iROCNotifyState("Disconnecting from server...");
control.iROCDebugLog("Sending Disconnect to server");
outMessage.setCommand(iROCMessageDefs.ROC_DISCONNECT);
writeObject(outMessage);
break;
case iROCStateDefs.ROC_ERROR_STATE:
control.iROCDebugLog("Error in communications encountered");
break;
retries=MAX_RETRIES;
catch (Exception e) {
returnResult = false;
control.iROCDebugLog("Retrying after failed send/receive - "+retries);
control.iROCNotifyState("Error receiving/sending data, retrying - "+retries);
/*iROCMainPanel.setDescription("Error receiving/sending data, retrying - "+retries);*/
retries++;
return returnResult;
now this exact server and client is running on a Unix ibm ips80 server and it works 100%

Whenever I use the search engine, it brings up sites within the topic but when i press on a website it goes off on an entirely different topic. And it happens all of the time every time except with my favorites.

I type in a topic i want to research, it gives me a list of websites, any website i click on, the search goes in random sites,,,,,,,,,,,,unrelated to the topic.

I type in a topic i want to research, it gives me a list of websites, any website i click on, the search goes in random sites,,,,,,,,,,,,unrelated to the topic.

Import from Word-Numbers at end of headings are cut off in the TOC though not in the topics themselv

I'm using Robohelp10, though this has always been an issue in all versions of RH that I've used. I have a document with many headings that end in a particular # (it's a version #)
e.g.
I3DMLFeatureLayer65.
I3DMLFeatureLayers65.
I3DMLFeatureProperties65.
I3DViewshed65.
IAction65.
IAttachment65.
IAttribute65.
IAttributes65
When I import and automatically have the TOC converted, all these headings appear in the RH TOC (books and pages) with the # 65 at the end missing, as such:
I3DMLFeatureLayer.
I3DMLFeatureLayers
I3DMLFeatureProperties
I3DViewshed
IAction
IAttachment
IAttribute
IAttributes
In the topics themselves, the topic title displays correctly (with the 65 at the end).
Has anyone else experienced this/have any suggestions? TIA.

Simply that plans change at this time of year.
I got exactly the same result and at first I wondered if it was because the document had tracked changes in it. I have seen that cause problems in the past and always recommend accepting them, in a copy document if you don't want to lose the tracking.
Accepting the changes made no difference and I would say this is a bug. Fortunately though there is a workaround that may be acceptable. Quite simply, add a full stop (period) or some other character after the number. A space will not work.
The more people who report a bug or request a feature, the more likely it is to be actioned. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How can I turn off the preview (overview) automatically executed when I launch Image Capture?

I love using Image Capture, but every time I launch it, it automatically does a previes of my scanner's flatbed. Most of the time, I don't use the flatbed. I use the feeder to scan multiple pages.
My question is this: Is there any way to turn off the automatic preview (overview) that Image Capture executes when it's launched?
Thanks in advance for any and all assistance!

Not a direct answer.
From Image Capture Help:
Scan pages with a document-feeding scanner
When you scan a document with a document-feeding scanner, the same settings are used for all the pages in the feeder. If your pages need different settings (for example, some are grayscale and some are color), separate them into different groups.
Before you begin these steps, you need to open your scanner. For instructions, see one of these help topics:
Scan an image
Scan an image with Image Capture
Scan an image with Preview
Place the pages in the scanner’s document feeder.
Turn on the Use Document Feeder option, if it’s present.
Set scanning options.You may need to click Show Details to see all the available options.Here are some of the options you can set. The options available to you depend on the scanner you’re using. Some options aren’t available on all scanners, and some scanners may have more options.
To choose the type of image being scanned, use the Kind pop-up menu.Choose Text for black-and-white images with high contrast, such as text. Choose Black & White for grayscale images. Choose Color for color images.
To scan both sides of a page, select Duplex.
To choose a size for the scanned image, use the Size pop-up menu.
To choose where to save the scanned images, use the Scan To pop-up menu.If you choose a folder, the images are stored in that folder. If you choose an app, the images are opened with that app.
To adjust the colors or exposure of the scanned image, choose Manual from the Image Correction pop-up menu, and adjust the controls.If you don’t see the image correction controls, scroll down or make the Scanner window taller.
Click Scan.The scanner scans the pages one by one.

How to switch off the loudspeaker during the video...

Hi everybody!
That is an old problem, and I found lots of topics and messages, but still no solution.
How long could it take, and how many programmers and designers should work till we can
get the button for switching on and off the loudspeaker?

Close the lid, or turn the backlight all the way down to 0.

Switching off the Time Capsule: risk of damage?

Hello everyone. If I switch off my time capsule (1TB, recently bought) when not in use, for example at night (I think to connect it to a power strip), could I damage it? Or maybe only if the TC hard drive is running?
Thanks

Welcome to the discussions!
This topic has been pretty much beat to death on the forums as there has been and will remain different schools of thought on this.
One school maintains that there is a very good reason that Apple chose not to even put a power switch on the device, and that is that it was designed to run 24/7. Powering off the TC causes it to lose its connection with the local network and internet. When the device is powered back up, these connections must be re-established. Also, when any electronic device is powered up from an off state, the components within the device are subjected to a sudden rush of current. The school thinking on this is that the device will last longer if the unit is left on and subjected to less stress.
The other school says power it down when not in use to save a bit of electricity. They don't buy the theory that a sudden rush of current has any long term effect on the device and claim that the device may actually last longer because the electronic components are subjected to less heat this way over time.
Choose your school, or maybe a middle ground that would have the TC powered off for long weekends, vacations or other extended periods when the device is not needed for backups.

Archiving Information from "old" SAP systems and switch off the server

Good day
I hope someone can offer some advice. Our company has a few sites across the globe. Three of the sites in South Africa ( where I'm working at the moment ) had their own SAP systems. Three odd years ago, we implementeted a new SAP system, combining the separate SAP systems into the new one, running of the same box etc etc. The "old" SAP systems were still availbale after the new one went live, in the event that people want to look back at history.
We are you busy with a project where we are going to merge our current SAP implementation into our global SAP system... obviously only the current master data are going to be transfered to the new system. It's an idea time for us to clean up our data.
My question: Once we go live on our global SAP system, we want to "export" or archive from the 3 "old" SAP systems the Master Data from the HR module ( like employees who's left the company - it's law to keep the records for 5 years at least once a employee has left) , HSEC and FI modules into a single datastore... this way we don't have to keep the three servers running in the event that history is required. The servers wil be kept off-line and only switched back on if a detailed audit is required.
The global SAP system does not have an archive solution implemented to we can't access archived data from the new system...
So, we need to export master data from our 3 old SAP boxes into a Unicode type file system, and our local South African sites needs to be able to access the information using a text type editor or a web based interface we can run off our SAP Portal...
Thank you

Hello Cornelius,
To introduce myself, I am an active SDN/BPX member as well as an ASUG Archiving and Information Lifecycle Management Volunteer.
Decommissioning Legacy Systems (SAP and non-SAP systems) is quite the topic these days with divestitures becoming such a common occurrence.
Some things to think about in this situation are:
Identifying the data to be decommissioned:
what information would be needed for an audit
what information would be needed for a lawsuit situation
Identifying the access requirements to this data.
Identifying the retention policies for this data (this will be
driven by regulatory requirements, etc.).
If this has not already been done - define retention periods for this data - it will most likely have different retention periods based on the type of data.
You mention that you do not have an archive solution in place yet.
I would recommend that you may want to research that option because typical requirements for retaining legacy data is that it is stored in such a manner so that it is protected from any type of modification.
There are a lot of 3rd party archiving/storage solutions that provide this type of secure storage.
You are correct in that you will want to export or archive the legacy data as opposed to loading the data into your current system. It would probably involve a large increase in the size of your SAP database and you would probably run into number range overlaps.
But, if this data is exported to a filesystem, you will be losing the business logic associated with the data, and the information is no longer in its original format (this could have legal ramifications).
I would recommend using SAP Archiving functionality for this effort. If you are looking for outside resources, there are many vendors out there that have a lot of experience with these types of projects.
Two that come to mind are Dolphin IT and OpenText.
Or, depending on the timeline of your project, SAP is coming out with a tool that can be used for decommissioning SAP Systems. It is part of
their SAP ILM solution. It will be called Retention Warehouse. Here is a paragraph from their latest white paper describing this new tool:
With the retention warehouse, SAP now offers a
standardized method for system decommissioning in
answer to these pressing issues. It allows you to reuse the archived data outside the original system in a central
retention warehouse.
For more detail on this topic, the white paper can be found on the SAP ILM Website:
service.sap.com/ilm
This tool is part of a larger initiative from SAP to help customers with their ILM (Information Lifecycle Management) strategy. This tool is near and dear to me as I was fortunate enough to be part of an
ASUG Influence Council that helped with some of the requirements for this solution.
I hope this information is useful.
Good luck and Best Regards,
Karin Tillotson

Help me? I can't power off the computer on archlinux0.8??

When i use the command 'halt -p', it only just power off the harddisk but not shut off the computer power!
Kernel version: normal kernel2.6.20
Ｉｓｅｅｔｈｅｋｅｒｎｅｌｃｏｎｆｉｇｆｉｌｅ，ｔｈｅａｐｍｄｅｆａｕｌｔｂｕｉｌｄｉｎｔｈｅｋｅｒｎｅｌ？
ｗｈｅｎｉｓｔａｒｔｔｈｅａｐｍｄｓｅｒｖｉｃｅ，ｂｕｔｆａｉｌｅｄ，ｉｔｓａｉｄｔｈａｔ：＂ｋｅｒｎｅｌｎｏｔｓｕｐｐｏｒｔａｐｍ＂？？？

Try posting the logs like Andy said, otherwise no one can diagnose what the problem is.
Then read this from GOOGLE first one in my search!
http://delili.lens.hl-users.com/forum/topic.php?post=51
Then try posting the logs again.
Oh yeah, if it doesn't work try posting relevant information like log files or dmesg.
Last edited by junglepeanut (2007-04-05 01:25:29)

JUmbled text in Safari, and it runs off the page and behind images

i have a really annoying problem that is only happening in Safari under every user on my computer.
I have been to the Apple store and they have tried to fix it, but it perplexed everyone there I guess,
either that or the fact that it was 8:30 and they close at 9... go figure. Anyways- When in Safari on
certain websites that are heavier on text the words displayed in the headlines or body copy overlap, become jumbled, and run off the page.
As I am typing this it is not letting my words wrap to the next line in the text box, I have to hit enter
everytime I want to go to a new line. This problem is getting so annoying, and I am on the brink of
switching to Firefox but I love Safari so much more. Can someone please help? I have already look
at the " never display fonts larger than____ option" I am hopelessly in need of some advice. Thanks
in advance for your time and patience. Have a great day!
Bill

howard --
This is your third post on the this subject in the last 5 days.
It's not necessary to start a new topic everytime.
Just check your "My Posts" in the box to the right of this message,
and you can always go right back to your posts.
Now, it looks like Hawaiian Starman & Rachel have already guided you
to look at your RSS feeds, etc. Why don't you check out their responses,
and then let us know here what the results are, OK?
Here are your other two threads:
http://discussions.apple.com/message.jspa?messageID=5354423#5354423
http://discussions.apple.com/message.jspa?messageID=5307512#5307512

Can I turn off the TOC ?

I am using RH 8, Windows 7 and generating WebHelp
I have a merged project. I have 4 child rpojects and 1 parent. Can I turn off the TOC on the parent and only see it on the child projects?
I have already unchecked all of the options in all of the windows when I generate and that didn't help.
thanks.
Pat

Hi all
Call me silly here, but why isn't this as simple as creating a single HTML page with links that point to the projects? If you want to use RoboHelp to create the page, go for it. Just turn off the "Show navigation pane link in topics" and generate. Then pluck out the single page and use it. Otherwise, just create a page in Dreamweaver or Notepad or any other editor to link to the projects.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Need to Turn it OFF the Notification used by the AIA Common Error Handler.

Hi All,
My requirement is to turn it off the Notifcation send by the AIA common Error Handler, when the error occurs in the AIA ecosystem.
Error Handling framework given by AIA does the Notification and Logging feature. In my case I need only the logging, but not the Notification. Notification has to be turned off for a time and has to be turned on when it is required.
1) I can acheive this by removeing the email account file (ie. ns_email.xml) from the server directory and can be replaced at the time when required,but this needs the restart of the Server.
Any Idea how to turn it off the notification and turn it on when required ?
Thanks,
Ashok.

Hi Rohit,
Thanks for your reply.
Is there any way to turn it off the Notification, because if we retire the ReadJMSNotification Service all the error message are stayed in the Topic and we have to manually drain the message from topic.
And one more thing is how the error messages are published to that AIA.AIA_Error_Topic.
Thanks,
Ashok.

Off-the-shelf products that can access DNG's XMP?

I'm sorry if this is off-topic.
I'm a photographer who uses DNG as my raw file format, and puts various things, (name, copyright statement, website, keywords, etc), into the DNGs, in the form of XMP. (Using Bridge + ACR). Then this XMP eventually gets into the PSDs, JPEGs, etc.
I do so on the assumption that in future I will be able to get off-the-shelf tools that will do something useful with this. Asset managers, etc. Or perhaps tools that will add to it - for example, adding GPS log data. Etc.
But this assumes that embedded XMP will be accepted as something that (non-Adobe) off-the-shelf tools will handle, perhaps routinely. I simply don't have a feel for whether that is the way the industry is going, or whether it will be concentrated in niche and specialised and bespoke tools. I would appreciate information of "routine" take-up.
Thanks.
(PLEASE don't give me a sales-pitch for XMP! I'm beyond the need for that).

Thanks, johnbeardy. (And thanks for your recent suggestions, you know where, for classifying support for DNG, and even XMP).
I am building up a picture here that the key to a sustainable DNG-based workflow isn't simply to have lots of tools, (by that I include "full blown applications"), that support DNG in some form. It is to have tools that can also exploit, in & out, the XMP metadata within the DNGs.
The vision I am getting of the desirable future of raw shooting has DNG at the centre, as a container for the raw image, a lot of XMP metadata of various sorts, plus some other stuff. It isn't a product-centred vision, it is a DNG-containing-XMP centred vision.
I suspect that this will be a hard vision to explain to others! You, and AlaskaBob, and Peter Krogh, and some, (probably not all), people in Adobe, won't have a problem - in fact, I'm a bit late on the scene. But there are very many people who can't even see the strategic advantages of DNG, let alone DNG-containing-XMP!
Very illuminating! Thanks.

[SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

Hi All,
After a update of my laptop, it does not fully wakes after going into suspend. It does not react to numlock anymore. I have to push the power button for 10 seconds to shut it down.
/var/log/everything.log, normal operations:
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: sending IPv6 Router Solicitation
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: sendmsg: Cannot assign requested address
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: no IPv6 Routers available
Jul 21 03:42:45 localhost dbus[533]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jul 21 03:42:45 localhost dbus[533]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jul 21 03:42:45 localhost acpid: client connected from 1134[0:1000]
Jul 21 03:42:45 localhost acpid: 1 client rule loaded
Jul 21 03:42:46 localhost NetworkManager[559]: <info> (wlan0): IP6 addrconf timed out or failed.
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jul 21 03:42:50 localhost acpid: client connected from 1134[0:1000]
Jul 21 03:42:50 localhost acpid: 1 client rule loaded
Jul 21 03:42:55 localhost kernel: [ 48.812457] fuse init (API version 7.18)
Jul 21 03:42:59 localhost dbus[533]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jul 21 03:42:59 localhost udisksd[1209]: udisks daemon version 1.94.0 starting
Jul 21 03:42:59 localhost dbus[533]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jul 21 03:42:59 localhost udisksd[1209]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jul 21 04:01:01 localhost /USR/SBIN/CROND[1363]: (root) CMD (run-parts /etc/cron.hourly)
Jul 21 04:01:01 localhost anacron[1369]: Anacron started on 2012-07-21
Jul 21 04:01:01 localhost anacron[1369]: Will run job `cron.daily' in 42 min.
Jul 21 04:01:01 localhost anacron[1369]: Jobs will be executed sequentially
Jul 21 04:21:01 localhost -- MARK --
/var/log/everything.log, after starting suspend:
Jul 21 04:21:13 localhost kernel: [ 2346.821030] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:21:13 localhost kernel: [ 2347.000872] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:25:10 localhost kernel: [ 2349.512404] PM: Syncing filesystems ... done.
Jul 21 04:25:10 localhost kernel: [ 2349.514874] PM: Preparing system for mem sleep
Jul 21 04:25:10 localhost kernel: [ 2349.514891] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jul 21 04:25:10 localhost kernel: [ 2349.526541] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jul 21 04:25:10 localhost kernel: [ 2349.539896] PM: Entering mem sleep
Jul 21 04:25:10 localhost kernel: [ 2349.539930] Suspending console(s) (use no_console_suspend to debug)
Jul 21 04:25:10 localhost kernel: [ 2349.573787] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jul 21 04:25:10 localhost kernel: [ 2349.611052] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2349.613512] sd 0:0:0:0: [sda] Stopping disk
Jul 21 04:25:10 localhost kernel: [ 2350.236650] PM: suspend of devices complete after 696.314 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.236925] PM: late suspend of devices complete after 0.270 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.237272] r8169 0000:08:00.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.266603] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.303271] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.326605] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.343218] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.379942] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.403292] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.426606] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.426678] PM: noirq suspend of devices complete after 189.749 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.427140] ACPI: Preparing to enter system sleep state S3
Jul 21 04:25:10 localhost kernel: [ 2350.519991] PM: Saving platform NVS memory
Jul 21 04:25:10 localhost kernel: [ 2350.520810] Disabling non-boot CPUs ...
Jul 21 04:25:10 localhost kernel: [ 2350.623205] CPU 1 is now offline
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Extended CMOS year: 2000
Jul 21 04:25:10 localhost kernel: [ 2350.623688] ACPI: Low-level resume complete
Jul 21 04:25:10 localhost kernel: [ 2350.623688] PM: Restoring platform NVS memory
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Extended CMOS year: 2000
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Enabling non-boot CPUs ...
Jul 21 04:25:10 localhost kernel: [ 2350.630554] Booting Node 0 Processor 1 APIC 0x1
Jul 21 04:25:10 localhost kernel: [ 2350.641916] NMI watchdog: enabled, takes one hw-pmu counter.
Jul 21 04:25:10 localhost kernel: [ 2350.645407] CPU1 is up
Jul 21 04:25:10 localhost kernel: [ 2350.647122] ACPI: Waking up from system sleep state S3
Jul 21 04:25:10 localhost kernel: [ 2350.653227] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.659889] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.666555] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.683204] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.689888] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.696556] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.713204] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.715075] PM: noirq resume of devices complete after 67.761 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.715286] PM: early resume of devices complete after 0.105 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.715344] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715373] usb usb1: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715391] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715421] usb usb2: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715437] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715465] usb usb3: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715480] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715521] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715540] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
Jul 21 04:25:10 localhost kernel: [ 2350.715550] usb usb4: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715571] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715601] usb usb5: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715611] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715623] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715639] usb usb6: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715647] pci 0000:00:1e.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715663] ata_piix 0000:00:1f.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715667] ata_piix 0000:00:1f.5: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715690] r8169 0000:08:00.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.723377] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2350.723395] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2350.816609] r8169 0000:08:00.0: eth0: link down
Jul 21 04:25:10 localhost kernel: [ 2351.111777] ata4: SATA link down (SStatus 0 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.128460] ata3: SATA link down (SStatus 0 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.199920] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2351.263475] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.276859] firewire_core 0000:1a:00.0: rediscovered device fw0
Jul 21 04:25:10 localhost kernel: [ 2351.283960] ata2.00: configured for UDMA/100
Jul 21 04:25:10 localhost kernel: [ 2351.739942] usb 2-2: reset low-speed USB device number 3 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.129932] usb 8-2: reset high-speed USB device number 2 using ehci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.359839] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.784239] usb 6-1.1: reset full-speed USB device number 3 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.883229] btusb 6-1.1:1.0: no reset_resume for driver btusb?
Jul 21 04:25:10 localhost kernel: [ 2352.883233] btusb 6-1.1:1.1: no reset_resume for driver btusb?
Jul 21 04:25:10 localhost kernel: [ 2352.941243] usb 6-1.2: reset full-speed USB device number 4 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.969919] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2353.101249] usb 6-1.3: reset full-speed USB device number 5 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2353.181194] ata1.00: configured for UDMA/133
Jul 21 04:25:10 localhost kernel: [ 2353.181463] sd 0:0:0:0: [sda] Starting disk
Jul 21 04:25:10 localhost kernel: [ 2353.436737] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Jul 21 04:25:10 localhost kernel: [ 2358.057138] PM: resume of devices complete after 7341.844 msecs
Jul 21 04:25:10 localhost kernel: [ 2358.057602] PM: Finishing wakeup.
Jul 21 04:25:10 localhost kernel: [ 2358.057604] Restarting tasks ... done.
Jul 21 04:25:10 localhost kernel: [ 2358.064234] video LNXVIDEO:00: Restoring backlight state
Jul 21 04:25:11 localhost kernel: [ 2358.233575] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.272368] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.309721] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.349601] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:13 localhost kernel: [ 2360.644416] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:25:13 localhost kernel: [ 2360.648163] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:25:13 localhost acpid: client 1134[0:1000] has disconnected
Jul 21 04:25:13 localhost acpid: client 1134[0:1000] has disconnected
Jul 21 04:25:13 localhost acpid: client connected from 1134[0:1000]
Jul 21 04:25:13 localhost acpid: 1 client rule loaded
Jul 21 04:25:26 localhost kernel: [ 2373.415894] NVRM: Xid (0000:01:00): 8, Channel 0000007e
Jul 21 04:25:26 localhost kernel: [ 2373.700350] hrtimer: interrupt took 91847280 ns
Jul 21 04:25:26 localhost kernel: [ 2373.700352] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
Jul 21 04:28:36 localhost kernel: [ 2563.568752] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:28:36 localhost kernel: [ 2563.573610] EXT4-fs (sda8): re-mounted. Opts: commit=0
What does this message mean?
Jul 21 04:25:26 localhost kernel: [ 2373.700352] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
What can i do to solve this?
Best regards,
Cedric
Last edited by cdwijs (2012-08-09 18:33:34)

I did a quick google search. This page suggested that I set my videocard in persistend mode:
http://scientificlinuxforum.org/index.p … topic=1469
So i did the following:
]# /usr/bin/nvidia-smi -pm 1
Enabled persistence mode for GPU 0000:01:00.0.
All done.
# /usr/bin/nvidia-smi -q
==============NVSMI LOG==============
Timestamp : Sat Jul 21 04:58:55 2012
Driver Version : 302.17
Attached GPUs : 1
GPU 0000:01:00.0
Product Name : GeForce 9600M GS
Display Mode : N/A
Persistence Mode : Enabled
Driver Model
Current : N/A
Pending : N/A
Serial Number : N/A
GPU UUID : N/A
VBIOS Version : 62.94.8D.00.0B
Inforom Version
OEM Object : N/A
ECC Object : N/A
Power Management Object : N/A
PCI
Bus : 0x01
Device : 0x00
Domain : 0x0000
Device Id : 0x064810DE
Bus Id : 0000:01:00.0
Sub System Id : 0x02C01028
GPU Link Info
PCIe Generation
Max : N/A
Current : N/A
Link Width
Max : N/A
Current : N/A
Fan Speed : N/A
Performance State : N/A
Memory Usage
Total : 511 MB
Used : 30 MB
Free : 480 MB
Compute Mode : Default
Utilization
Gpu : N/A
Memory : N/A
Ecc Mode
Current : N/A
Pending : N/A
ECC Errors
Volatile
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Aggregate
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Temperature
Gpu : 61 C
Power Readings
Power Management : N/A
Power Draw : N/A
Power Limit : N/A
Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Max Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Compute Processes : Not Supported
This did not solve the issue. The laptop goes into suspend (the power LED starts blinking), but when the power button is then briefly pressed, the machine does power-up, but after hearing 2 clicks from the speaker, i get a black screen, a full-running CPU fan, and no reaction to numlock.
/var/log/everything.log:
Jul 21 04:30:13 localhost NetworkManager[565]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jul 21 04:50:40 localhost -- MARK --
Jul 21 04:54:46 localhost kernel: [ 1516.765698] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:54:46 localhost kernel: [ 1516.942964] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:55:02 localhost kernel: [ 1519.654895] PM: Syncing filesystems ... done.
Jul 21 04:55:02 localhost kernel: [ 1519.657049] PM: Preparing system for mem sleep
Jul 21 04:55:02 localhost kernel: [ 1519.657066] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jul 21 04:55:02 localhost kernel: [ 1519.669943] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jul 21 04:55:02 localhost kernel: [ 1519.683296] PM: Entering mem sleep
Jul 21 04:55:02 localhost kernel: [ 1519.683337] Suspending console(s) (use no_console_suspend to debug)
Jul 21 04:55:02 localhost kernel: [ 1519.717139] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jul 21 04:55:02 localhost kernel: [ 1519.749832] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1519.786781] sd 0:0:0:0: [sda] Stopping disk
Jul 21 04:55:02 localhost kernel: [ 1520.410064] PM: suspend of devices complete after 726.343 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.410337] PM: late suspend of devices complete after 0.266 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.410678] r8169 0000:08:00.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.440024] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.476689] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.500023] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.516685] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.553353] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.576688] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.603354] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.603426] PM: noirq suspend of devices complete after 193.085 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.603888] ACPI: Preparing to enter system sleep state S3
Jul 21 04:55:02 localhost kernel: [ 1520.693403] PM: Saving platform NVS memory
Jul 21 04:55:02 localhost kernel: [ 1520.694218] Disabling non-boot CPUs ...
Jul 21 04:55:02 localhost kernel: [ 1520.796623] CPU 1 is now offline
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1520.797088] ACPI: Low-level resume complete
Jul 21 04:55:02 localhost kernel: [ 1520.797088] PM: Restoring platform NVS memory
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Enabling non-boot CPUs ...
Jul 21 04:55:02 localhost kernel: [ 1520.803951] Booting Node 0 Processor 1 APIC 0x1
Jul 21 04:55:02 localhost kernel: [ 1520.815303] NMI watchdog: enabled, takes one hw-pmu counter.
Jul 21 04:55:02 localhost kernel: [ 1520.816608] CPU1 is up
Jul 21 04:55:02 localhost kernel: [ 1520.818293] ACPI: Waking up from system sleep state S3
Jul 21 04:55:02 localhost kernel: [ 1520.823322] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.829975] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.836638] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.853290] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.859971] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.866638] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.883290] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.885162] PM: noirq resume of devices complete after 66.681 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.885372] PM: early resume of devices complete after 0.105 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.885432] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885432] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885465] usb usb1: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885466] usb usb2: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885487] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885490] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885518] usb usb3: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885549] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885582] usb usb4: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885582] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
Jul 21 04:55:02 localhost kernel: [ 1520.885600] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885629] usb usb5: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885648] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885653] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885680] pci 0000:00:1e.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885679] usb usb6: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885698] ata_piix 0000:00:1f.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885713] ata_piix 0000:00:1f.5: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885736] r8169 0000:08:00.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.890553] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1520.891048] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1520.960285] r8169 0000:08:00.0: eth0: link down
Jul 21 04:55:02 localhost kernel: [ 1521.281391] ata3: SATA link down (SStatus 0 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.297666] ata4: SATA link down (SStatus 0 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.332377] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1521.376657] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1521.406940] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.427670] ata2.00: configured for UDMA/100
Jul 21 04:55:02 localhost acpid: client 1147[0:1000] has disconnected
Jul 21 04:55:02 localhost acpid: client 1147[0:1000] has disconnected
Jul 21 04:55:02 localhost kernel: [ 1521.453328] firewire_core 0000:1a:00.0: rediscovered device fw0
Jul 21 04:55:02 localhost kernel: [ 1521.915219] usb 2-2: reset low-speed USB device number 3 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.303337] usb 8-2: reset high-speed USB device number 2 using ehci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.533339] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.955078] usb 6-1.1: reset full-speed USB device number 3 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.057065] btusb 6-1.1:1.0: no reset_resume for driver btusb?
Jul 21 04:55:02 localhost kernel: [ 1523.057070] btusb 6-1.1:1.1: no reset_resume for driver btusb?
Jul 21 04:55:02 localhost kernel: [ 1523.113342] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1523.115078] usb 6-1.2: reset full-speed USB device number 4 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.278082] usb 6-1.3: reset full-speed USB device number 5 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.321369] ata1.00: configured for UDMA/133
Jul 21 04:55:02 localhost kernel: [ 1523.321637] sd 0:0:0:0: [sda] Starting disk
Jul 21 04:55:02 localhost kernel: [ 1523.613501] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Jul 21 04:55:02 localhost kernel: [ 1528.234017] PM: resume of devices complete after 7348.637 msecs
Jul 21 04:55:02 localhost kernel: [ 1528.234472] PM: Finishing wakeup.
Jul 21 04:55:02 localhost kernel: [ 1528.234474] Restarting tasks ... done.
Jul 21 04:55:02 localhost kernel: [ 1528.239320] video LNXVIDEO:00: Restoring backlight state
Jul 21 04:55:02 localhost acpid: client connected from 1147[0:1000]
Jul 21 04:55:02 localhost acpid: 1 client rule loaded
Jul 21 04:55:02 localhost kernel: [ 1528.396372] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.433245] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.469720] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.506634] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:03 localhost kernel: [ 1530.007718] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:55:04 localhost kernel: [ 1530.271879] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:55:55 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jul 21 04:55:55 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Interestingly, the message that the GPU has fallen off the bus is no longer present. Something else is going on as well :-)
Best regards,
Cedric

Off the topic

Similar Messages

Maybe you are looking for