[SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus
Hi All,
After a update of my laptop, it does not fully wakes after going into suspend. It does not react to numlock anymore. I have to push the power button for 10 seconds to shut it down.
/var/log/everything.log, normal operations:
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: sending IPv6 Router Solicitation
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: sendmsg: Cannot assign requested address
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: no IPv6 Routers available
Jul 21 03:42:45 localhost dbus[533]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jul 21 03:42:45 localhost dbus[533]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jul 21 03:42:45 localhost acpid: client connected from 1134[0:1000]
Jul 21 03:42:45 localhost acpid: 1 client rule loaded
Jul 21 03:42:46 localhost NetworkManager[559]: <info> (wlan0): IP6 addrconf timed out or failed.
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jul 21 03:42:50 localhost acpid: client connected from 1134[0:1000]
Jul 21 03:42:50 localhost acpid: 1 client rule loaded
Jul 21 03:42:55 localhost kernel: [ 48.812457] fuse init (API version 7.18)
Jul 21 03:42:59 localhost dbus[533]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jul 21 03:42:59 localhost udisksd[1209]: udisks daemon version 1.94.0 starting
Jul 21 03:42:59 localhost dbus[533]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jul 21 03:42:59 localhost udisksd[1209]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jul 21 04:01:01 localhost /USR/SBIN/CROND[1363]: (root) CMD (run-parts /etc/cron.hourly)
Jul 21 04:01:01 localhost anacron[1369]: Anacron started on 2012-07-21
Jul 21 04:01:01 localhost anacron[1369]: Will run job `cron.daily' in 42 min.
Jul 21 04:01:01 localhost anacron[1369]: Jobs will be executed sequentially
Jul 21 04:21:01 localhost -- MARK --
/var/log/everything.log, after starting suspend:
Jul 21 04:21:13 localhost kernel: [ 2346.821030] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:21:13 localhost kernel: [ 2347.000872] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:25:10 localhost kernel: [ 2349.512404] PM: Syncing filesystems ... done.
Jul 21 04:25:10 localhost kernel: [ 2349.514874] PM: Preparing system for mem sleep
Jul 21 04:25:10 localhost kernel: [ 2349.514891] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jul 21 04:25:10 localhost kernel: [ 2349.526541] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jul 21 04:25:10 localhost kernel: [ 2349.539896] PM: Entering mem sleep
Jul 21 04:25:10 localhost kernel: [ 2349.539930] Suspending console(s) (use no_console_suspend to debug)
Jul 21 04:25:10 localhost kernel: [ 2349.573787] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jul 21 04:25:10 localhost kernel: [ 2349.611052] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2349.613512] sd 0:0:0:0: [sda] Stopping disk
Jul 21 04:25:10 localhost kernel: [ 2350.236650] PM: suspend of devices complete after 696.314 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.236925] PM: late suspend of devices complete after 0.270 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.237272] r8169 0000:08:00.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.266603] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.303271] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.326605] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.343218] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.379942] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.403292] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.426606] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.426678] PM: noirq suspend of devices complete after 189.749 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.427140] ACPI: Preparing to enter system sleep state S3
Jul 21 04:25:10 localhost kernel: [ 2350.519991] PM: Saving platform NVS memory
Jul 21 04:25:10 localhost kernel: [ 2350.520810] Disabling non-boot CPUs ...
Jul 21 04:25:10 localhost kernel: [ 2350.623205] CPU 1 is now offline
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Extended CMOS year: 2000
Jul 21 04:25:10 localhost kernel: [ 2350.623688] ACPI: Low-level resume complete
Jul 21 04:25:10 localhost kernel: [ 2350.623688] PM: Restoring platform NVS memory
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Extended CMOS year: 2000
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Enabling non-boot CPUs ...
Jul 21 04:25:10 localhost kernel: [ 2350.630554] Booting Node 0 Processor 1 APIC 0x1
Jul 21 04:25:10 localhost kernel: [ 2350.641916] NMI watchdog: enabled, takes one hw-pmu counter.
Jul 21 04:25:10 localhost kernel: [ 2350.645407] CPU1 is up
Jul 21 04:25:10 localhost kernel: [ 2350.647122] ACPI: Waking up from system sleep state S3
Jul 21 04:25:10 localhost kernel: [ 2350.653227] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.659889] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.666555] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.683204] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.689888] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.696556] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.713204] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.715075] PM: noirq resume of devices complete after 67.761 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.715286] PM: early resume of devices complete after 0.105 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.715344] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715373] usb usb1: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715391] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715421] usb usb2: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715437] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715465] usb usb3: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715480] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715521] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715540] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
Jul 21 04:25:10 localhost kernel: [ 2350.715550] usb usb4: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715571] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715601] usb usb5: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715611] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715623] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715639] usb usb6: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715647] pci 0000:00:1e.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715663] ata_piix 0000:00:1f.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715667] ata_piix 0000:00:1f.5: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715690] r8169 0000:08:00.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.723377] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2350.723395] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2350.816609] r8169 0000:08:00.0: eth0: link down
Jul 21 04:25:10 localhost kernel: [ 2351.111777] ata4: SATA link down (SStatus 0 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.128460] ata3: SATA link down (SStatus 0 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.199920] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2351.263475] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.276859] firewire_core 0000:1a:00.0: rediscovered device fw0
Jul 21 04:25:10 localhost kernel: [ 2351.283960] ata2.00: configured for UDMA/100
Jul 21 04:25:10 localhost kernel: [ 2351.739942] usb 2-2: reset low-speed USB device number 3 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.129932] usb 8-2: reset high-speed USB device number 2 using ehci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.359839] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.784239] usb 6-1.1: reset full-speed USB device number 3 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.883229] btusb 6-1.1:1.0: no reset_resume for driver btusb?
Jul 21 04:25:10 localhost kernel: [ 2352.883233] btusb 6-1.1:1.1: no reset_resume for driver btusb?
Jul 21 04:25:10 localhost kernel: [ 2352.941243] usb 6-1.2: reset full-speed USB device number 4 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.969919] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2353.101249] usb 6-1.3: reset full-speed USB device number 5 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2353.181194] ata1.00: configured for UDMA/133
Jul 21 04:25:10 localhost kernel: [ 2353.181463] sd 0:0:0:0: [sda] Starting disk
Jul 21 04:25:10 localhost kernel: [ 2353.436737] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Jul 21 04:25:10 localhost kernel: [ 2358.057138] PM: resume of devices complete after 7341.844 msecs
Jul 21 04:25:10 localhost kernel: [ 2358.057602] PM: Finishing wakeup.
Jul 21 04:25:10 localhost kernel: [ 2358.057604] Restarting tasks ... done.
Jul 21 04:25:10 localhost kernel: [ 2358.064234] video LNXVIDEO:00: Restoring backlight state
Jul 21 04:25:11 localhost kernel: [ 2358.233575] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.272368] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.309721] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.349601] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:13 localhost kernel: [ 2360.644416] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:25:13 localhost kernel: [ 2360.648163] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:25:13 localhost acpid: client 1134[0:1000] has disconnected
Jul 21 04:25:13 localhost acpid: client 1134[0:1000] has disconnected
Jul 21 04:25:13 localhost acpid: client connected from 1134[0:1000]
Jul 21 04:25:13 localhost acpid: 1 client rule loaded
Jul 21 04:25:26 localhost kernel: [ 2373.415894] NVRM: Xid (0000:01:00): 8, Channel 0000007e
Jul 21 04:25:26 localhost kernel: [ 2373.700350] hrtimer: interrupt took 91847280 ns
Jul 21 04:25:26 localhost kernel: [ 2373.700352] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
Jul 21 04:28:36 localhost kernel: [ 2563.568752] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:28:36 localhost kernel: [ 2563.573610] EXT4-fs (sda8): re-mounted. Opts: commit=0
What does this message mean?
Jul 21 04:25:26 localhost kernel: [ 2373.700352] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
What can i do to solve this?
Best regards,
Cedric
Last edited by cdwijs (2012-08-09 18:33:34)
I did a quick google search. This page suggested that I set my videocard in persistend mode:
http://scientificlinuxforum.org/index.p … topic=1469
So i did the following:
]# /usr/bin/nvidia-smi -pm 1
Enabled persistence mode for GPU 0000:01:00.0.
All done.
# /usr/bin/nvidia-smi -q
==============NVSMI LOG==============
Timestamp : Sat Jul 21 04:58:55 2012
Driver Version : 302.17
Attached GPUs : 1
GPU 0000:01:00.0
Product Name : GeForce 9600M GS
Display Mode : N/A
Persistence Mode : Enabled
Driver Model
Current : N/A
Pending : N/A
Serial Number : N/A
GPU UUID : N/A
VBIOS Version : 62.94.8D.00.0B
Inforom Version
OEM Object : N/A
ECC Object : N/A
Power Management Object : N/A
PCI
Bus : 0x01
Device : 0x00
Domain : 0x0000
Device Id : 0x064810DE
Bus Id : 0000:01:00.0
Sub System Id : 0x02C01028
GPU Link Info
PCIe Generation
Max : N/A
Current : N/A
Link Width
Max : N/A
Current : N/A
Fan Speed : N/A
Performance State : N/A
Memory Usage
Total : 511 MB
Used : 30 MB
Free : 480 MB
Compute Mode : Default
Utilization
Gpu : N/A
Memory : N/A
Ecc Mode
Current : N/A
Pending : N/A
ECC Errors
Volatile
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Aggregate
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Temperature
Gpu : 61 C
Power Readings
Power Management : N/A
Power Draw : N/A
Power Limit : N/A
Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Max Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Compute Processes : Not Supported
This did not solve the issue. The laptop goes into suspend (the power LED starts blinking), but when the power button is then briefly pressed, the machine does power-up, but after hearing 2 clicks from the speaker, i get a black screen, a full-running CPU fan, and no reaction to numlock.
/var/log/everything.log:
Jul 21 04:30:13 localhost NetworkManager[565]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jul 21 04:50:40 localhost -- MARK --
Jul 21 04:54:46 localhost kernel: [ 1516.765698] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:54:46 localhost kernel: [ 1516.942964] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:55:02 localhost kernel: [ 1519.654895] PM: Syncing filesystems ... done.
Jul 21 04:55:02 localhost kernel: [ 1519.657049] PM: Preparing system for mem sleep
Jul 21 04:55:02 localhost kernel: [ 1519.657066] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jul 21 04:55:02 localhost kernel: [ 1519.669943] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jul 21 04:55:02 localhost kernel: [ 1519.683296] PM: Entering mem sleep
Jul 21 04:55:02 localhost kernel: [ 1519.683337] Suspending console(s) (use no_console_suspend to debug)
Jul 21 04:55:02 localhost kernel: [ 1519.717139] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jul 21 04:55:02 localhost kernel: [ 1519.749832] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1519.786781] sd 0:0:0:0: [sda] Stopping disk
Jul 21 04:55:02 localhost kernel: [ 1520.410064] PM: suspend of devices complete after 726.343 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.410337] PM: late suspend of devices complete after 0.266 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.410678] r8169 0000:08:00.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.440024] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.476689] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.500023] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.516685] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.553353] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.576688] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.603354] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.603426] PM: noirq suspend of devices complete after 193.085 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.603888] ACPI: Preparing to enter system sleep state S3
Jul 21 04:55:02 localhost kernel: [ 1520.693403] PM: Saving platform NVS memory
Jul 21 04:55:02 localhost kernel: [ 1520.694218] Disabling non-boot CPUs ...
Jul 21 04:55:02 localhost kernel: [ 1520.796623] CPU 1 is now offline
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1520.797088] ACPI: Low-level resume complete
Jul 21 04:55:02 localhost kernel: [ 1520.797088] PM: Restoring platform NVS memory
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Enabling non-boot CPUs ...
Jul 21 04:55:02 localhost kernel: [ 1520.803951] Booting Node 0 Processor 1 APIC 0x1
Jul 21 04:55:02 localhost kernel: [ 1520.815303] NMI watchdog: enabled, takes one hw-pmu counter.
Jul 21 04:55:02 localhost kernel: [ 1520.816608] CPU1 is up
Jul 21 04:55:02 localhost kernel: [ 1520.818293] ACPI: Waking up from system sleep state S3
Jul 21 04:55:02 localhost kernel: [ 1520.823322] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.829975] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.836638] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.853290] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.859971] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.866638] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.883290] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.885162] PM: noirq resume of devices complete after 66.681 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.885372] PM: early resume of devices complete after 0.105 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.885432] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885432] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885465] usb usb1: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885466] usb usb2: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885487] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885490] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885518] usb usb3: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885549] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885582] usb usb4: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885582] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
Jul 21 04:55:02 localhost kernel: [ 1520.885600] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885629] usb usb5: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885648] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885653] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885680] pci 0000:00:1e.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885679] usb usb6: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885698] ata_piix 0000:00:1f.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885713] ata_piix 0000:00:1f.5: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885736] r8169 0000:08:00.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.890553] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1520.891048] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1520.960285] r8169 0000:08:00.0: eth0: link down
Jul 21 04:55:02 localhost kernel: [ 1521.281391] ata3: SATA link down (SStatus 0 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.297666] ata4: SATA link down (SStatus 0 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.332377] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1521.376657] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1521.406940] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.427670] ata2.00: configured for UDMA/100
Jul 21 04:55:02 localhost acpid: client 1147[0:1000] has disconnected
Jul 21 04:55:02 localhost acpid: client 1147[0:1000] has disconnected
Jul 21 04:55:02 localhost kernel: [ 1521.453328] firewire_core 0000:1a:00.0: rediscovered device fw0
Jul 21 04:55:02 localhost kernel: [ 1521.915219] usb 2-2: reset low-speed USB device number 3 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.303337] usb 8-2: reset high-speed USB device number 2 using ehci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.533339] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.955078] usb 6-1.1: reset full-speed USB device number 3 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.057065] btusb 6-1.1:1.0: no reset_resume for driver btusb?
Jul 21 04:55:02 localhost kernel: [ 1523.057070] btusb 6-1.1:1.1: no reset_resume for driver btusb?
Jul 21 04:55:02 localhost kernel: [ 1523.113342] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1523.115078] usb 6-1.2: reset full-speed USB device number 4 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.278082] usb 6-1.3: reset full-speed USB device number 5 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.321369] ata1.00: configured for UDMA/133
Jul 21 04:55:02 localhost kernel: [ 1523.321637] sd 0:0:0:0: [sda] Starting disk
Jul 21 04:55:02 localhost kernel: [ 1523.613501] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Jul 21 04:55:02 localhost kernel: [ 1528.234017] PM: resume of devices complete after 7348.637 msecs
Jul 21 04:55:02 localhost kernel: [ 1528.234472] PM: Finishing wakeup.
Jul 21 04:55:02 localhost kernel: [ 1528.234474] Restarting tasks ... done.
Jul 21 04:55:02 localhost kernel: [ 1528.239320] video LNXVIDEO:00: Restoring backlight state
Jul 21 04:55:02 localhost acpid: client connected from 1147[0:1000]
Jul 21 04:55:02 localhost acpid: 1 client rule loaded
Jul 21 04:55:02 localhost kernel: [ 1528.396372] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.433245] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.469720] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.506634] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:03 localhost kernel: [ 1530.007718] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:55:04 localhost kernel: [ 1530.271879] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:55:55 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jul 21 04:55:55 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Interestingly, the message that the GPU has fallen off the bus is no longer present. Something else is going on as well :-)
Best regards,
Cedric
Similar Messages
-
I experienced a weird problem for which I don't know the reason. A few months ago I had this problem which if I have to describe it, this is how it happens:
While I'm surfing, coding or playing a game, X dies (freezes) and the monitor goes black losing connection with the GPU. I saw the GPU message in dmesg and after a few more times it happened, I opened my PC, disassembled everything to clean the dust. Afterwards everything went okay, back to normal. Today, I experienced the problem again while playing a game and logged in through ssh to get some logs. Here's what I got:
# dmesg
[Mon Jan 5 17:57:32 2015] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[Mon Jan 5 17:57:32 2015] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[1538364.433]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[1538364.475] X Protocol Version 11, Revision 0
[1538364.490] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[1538364.505] Current Operating System: Linux archy 3.18.1-1-ARCH #1 SMP PREEMPT Wed Dec 17 15:40:09 CET 2014 x86_64
[1538364.505] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/archy/root rw vga=0x361 resume=/dev/archy/swap initrd=../intel-ucode.img,../initramfs-linux.img
[1538364.537] Build Date: 29 December 2014 01:09:58PM
[1538364.552]
[1538364.567] Current version of pixman: 0.32.6
[1538364.597] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1538364.597] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1538364.657] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 4 14:27:25 2015
[1538364.672] (==) Using config file: "/etc/X11/xorg.conf"
[1538364.687] (==) Using config directory: "/etc/X11/xorg.conf.d"
[1538364.702] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[1538364.702] (==) ServerLayout "Layout0"
[1538364.702] (**) |-->Screen "Screen0" (0)
[1538364.702] (**) | |-->Monitor "Monitor0"
[1538364.702] (**) | |-->Device "Device0"
[1538364.702] (**) |-->Input Device "Keyboard0"
[1538364.702] (**) |-->Input Device "Mouse0"
[1538364.702] (==) Automatically adding devices
[1538364.702] (==) Automatically enabling devices
[1538364.702] (==) Automatically adding GPU devices
[1538364.702] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[1538364.702] Entry deleted from font path.
[1538364.702] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[1538364.702] Entry deleted from font path.
[1538364.702] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[1538364.702] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[1538364.702] Entry deleted from font path.
[1538364.702] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[1538364.702] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[1538364.702] (==) ModulePath set to "/usr/lib/xorg/modules"
[1538364.702] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[1538364.702] (WW) Disabling Keyboard0
[1538364.702] (WW) Disabling Mouse0
[1538364.702] (II) Loader magic: 0x818d80
[1538364.702] (II) Module ABI versions:
[1538364.702] X.Org ANSI C Emulation: 0.4
[1538364.702] X.Org Video Driver: 18.0
[1538364.702] X.Org XInput driver : 21.0
[1538364.702] X.Org Server Extension : 8.0
[1538364.704] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[1538364.704] (II) xfree86: Adding drm device (/dev/dri/card0)
[1538364.704] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[1538364.704] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Invalid argument
[1538364.704] (II) systemd-logind: releasing fd for 226:0
[1538364.705] (--) PCI:*(0:1:0:0) 10de:1245:10b0:0401 rev 161, Mem @ 0xfc000000/33554432, 0xe8000000/134217728, 0xf0000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[1538364.705] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[1538364.705] (II) LoadModule: "glx"
[1538364.706] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[1538364.712] (II) Module glx: vendor="NVIDIA Corporation"
[1538364.713] compiled for 4.0.2, module version = 1.0.0
[1538364.713] Module class: X.Org Server Extension
[1538364.713] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[1538364.713] (II) LoadModule: "nvidia"
[1538364.713] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[1538364.713] (II) Module nvidia: vendor="NVIDIA Corporation"
[1538364.713] compiled for 4.0.2, module version = 1.0.0
[1538364.713] Module class: X.Org Video Driver
[1538364.713] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[1538364.713] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[1538364.713] (++) using VT number 1
[1538364.713] (--) controlling tty is VT number 1, auto-enabling KeepTty
[1538364.713] (II) Loading sub module "fb"
[1538364.713] (II) LoadModule: "fb"
[1538364.713] (II) Loading /usr/lib/xorg/modules/libfb.so
[1538364.713] (II) Module fb: vendor="X.Org Foundation"
[1538364.713] compiled for 1.16.3, module version = 1.0.0
[1538364.713] ABI class: X.Org ANSI C Emulation, version 0.4
[1538364.713] (II) Loading sub module "wfb"
[1538364.713] (II) LoadModule: "wfb"
[1538364.713] (II) Loading /usr/lib/xorg/modules/libwfb.so
[1538364.713] (II) Module wfb: vendor="X.Org Foundation"
[1538364.713] compiled for 1.16.3, module version = 1.0.0
[1538364.713] ABI class: X.Org ANSI C Emulation, version 0.4
[1538364.713] (II) Loading sub module "ramdac"
[1538364.713] (II) LoadModule: "ramdac"
[1538364.713] (II) Module "ramdac" already built-in
[1538364.714] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[1538364.714] (==) NVIDIA(0): RGB weight 888
[1538364.714] (==) NVIDIA(0): Default visual is TrueColor
[1538364.714] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[1538364.714] (**) NVIDIA(0): Option "NoLogo" "True"
[1538364.714] (**) NVIDIA(0): Enabling 2D acceleration
[1538364.951] (II) NVIDIA(0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1538364.951] (II) NVIDIA(0): Vision stereo.
[1538365.009] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF116) at PCI:1:0:0 (GPU-0)
[1538365.009] (--) NVIDIA(0): Memory: 1048576 kBytes
[1538365.009] (--) NVIDIA(0): VideoBIOS: 70.26.23.00.00
[1538365.009] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[1538365.014] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 450 at PCI:1:0:0
[1538365.014] (--) NVIDIA(0): CRT-0
[1538365.014] (--) NVIDIA(0): CRT-1
[1538365.014] (--) NVIDIA(0): DFP-0
[1538365.014] (--) NVIDIA(0): Philips 234CL (DFP-1) (boot, connected)
[1538365.014] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[1538365.014] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[1538365.014] (--) NVIDIA(0): DFP-0: Internal TMDS
[1538365.014] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[1538365.014] (--) NVIDIA(0): Philips 234CL (DFP-1): Internal TMDS
[1538365.014] (--) NVIDIA(GPU-0): Philips 234CL (DFP-1): 225.0 MHz maximum pixel clock
[1538365.014] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[1538365.014] (**) NVIDIA(0): device Philips 234CL (DFP-1) (Using EDID frequencies has
[1538365.014] (**) NVIDIA(0): been enabled on all display devices.)
[1538365.014] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.014] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.014] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.014] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.014] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.014] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.014] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.014] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.014] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (30.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (25.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (27.0 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "720x480".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "720x480".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "720x576".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.016] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.016] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.016] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.016] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check
[1538365.016] (WW) NVIDIA(GPU-0): for mode "720x576".
[1538365.016] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.016] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.016] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.016] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.016] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.016] (==) NVIDIA(0):
[1538365.016] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[1538365.016] (==) NVIDIA(0): will be used as the requested mode.
[1538365.016] (==) NVIDIA(0):
[1538365.016] (II) NVIDIA(0): Validated MetaModes:
[1538365.016] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[1538365.016] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[1538365.039] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[1538365.039] (--) NVIDIA(0): option
[1538365.039] (--) Depth 24 pixmap format is 32 bpp
[1538365.039] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[1538365.039] (II) NVIDIA: access.
[1538365.040] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[1538365.040] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[1538365.041] (II) NVIDIA(0): configuration option may not be set correctly. When the
[1538365.041] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[1538365.041] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[1538365.041] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[1538365.041] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[1538365.041] (II) NVIDIA(0): Config Options in the README.
[1538365.045] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[1538365.117] (==) NVIDIA(0): Disabling shared memory pixmaps
[1538365.117] (==) NVIDIA(0): Backing store enabled
[1538365.117] (==) NVIDIA(0): Silken mouse enabled
[1538365.117] (**) NVIDIA(0): DPMS enabled
[1538365.117] (II) Loading sub module "dri2"
[1538365.117] (II) LoadModule: "dri2"
[1538365.117] (II) Module "dri2" already built-in
[1538365.117] (II) NVIDIA(0): [DRI2] Setup complete
[1538365.117] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[1538365.117] (--) RandR disabled
[1538365.120] (II) Initializing extension GLX
[1538365.145] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[1538365.145] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[1538365.145] (II) LoadModule: "evdev"
[1538365.145] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[1538365.145] (II) Module evdev: vendor="X.Org Foundation"
[1538365.145] compiled for 1.16.2, module version = 2.9.1
[1538365.145] Module class: X.Org XInput Driver
[1538365.145] ABI class: X.Org XInput driver, version 21.0
[1538365.146] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
[1538365.146] (II) Using input driver 'evdev' for 'Power Button'
[1538365.146] (**) Power Button: always reports core events
[1538365.146] (**) evdev: Power Button: Device: "/dev/input/event5"
[1538365.146] (--) evdev: Power Button: Vendor 0 Product 0x1
[1538365.146] (--) evdev: Power Button: Found keys
[1538365.146] (II) evdev: Power Button: Configuring as keyboard
[1538365.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[1538365.146] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[1538365.146] (**) Option "xkb_rules" "evdev"
[1538365.146] (**) Option "xkb_model" "pc104"
[1538365.146] (**) Option "xkb_layout" "us"
[1538365.159] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[1538365.159] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[1538365.160] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[1538365.160] (II) Using input driver 'evdev' for 'Power Button'
[1538365.160] (**) Power Button: always reports core events
[1538365.160] (**) evdev: Power Button: Device: "/dev/input/event4"
[1538365.160] (--) evdev: Power Button: Vendor 0 Product 0x1
[1538365.160] (--) evdev: Power Button: Found keys
[1538365.160] (II) evdev: Power Button: Configuring as keyboard
[1538365.160] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[1538365.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[1538365.160] (**) Option "xkb_rules" "evdev"
[1538365.160] (**) Option "xkb_model" "pc104"
[1538365.160] (**) Option "xkb_layout" "us"
[1538365.160] (II) config/udev: Adding drm device (/dev/dri/card0)
[1538365.160] (II) xfree86: Adding drm device (/dev/dri/card0)
[1538365.161] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 28 paused 0
[1538365.161] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Invalid argument
[1538365.161] (II) systemd-logind: releasing fd for 226:0
[1538365.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[1538365.161] (II) No input driver specified, ignoring this device.
[1538365.161] (II) This device may have been added with another device file.
[1538365.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[1538365.161] (II) No input driver specified, ignoring this device.
[1538365.161] (II) This device may have been added with another device file.
[1538365.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[1538365.161] (II) No input driver specified, ignoring this device.
[1538365.161] (II) This device may have been added with another device file.
[1538365.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[1538365.161] (II) No input driver specified, ignoring this device.
[1538365.162] (II) This device may have been added with another device file.
[1538365.162] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[1538365.162] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[1538365.162] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[1538365.162] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[1538365.162] (**) Logitech USB Receiver: always reports core events
[1538365.162] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[1538365.162] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[1538365.162] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[1538365.162] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[1538365.162] (--) evdev: Logitech USB Receiver: Found relative axes
[1538365.162] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[1538365.162] (II) evdev: Logitech USB Receiver: Configuring as mouse
[1538365.162] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[1538365.162] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[1538365.162] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1538365.162] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C521.0009/input/input22/event0"
[1538365.162] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[1538365.162] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[1538365.162] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[1538365.162] (**) Logitech USB Receiver: (accel) acceleration profile 0
[1538365.162] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[1538365.162] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[1538365.162] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[1538365.162] (II) No input driver specified, ignoring this device.
[1538365.162] (II) This device may have been added with another device file.
[1538365.163] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[1538365.163] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[1538365.163] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[1538365.163] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[1538365.163] (**) Logitech USB Receiver: always reports core events
[1538365.163] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[1538365.163] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[1538365.163] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[1538365.163] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[1538365.163] (--) evdev: Logitech USB Receiver: Found relative axes
[1538365.163] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[1538365.163] (--) evdev: Logitech USB Receiver: Found absolute axes
[1538365.163] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[1538365.163] (--) evdev: Logitech USB Receiver: Found keys
[1538365.163] (II) evdev: Logitech USB Receiver: Configuring as mouse
[1538365.163] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[1538365.163] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[1538365.163] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[1538365.163] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1538365.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C521.000A/input/input23/event1"
[1538365.163] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[1538365.163] (**) Option "xkb_rules" "evdev"
[1538365.163] (**) Option "xkb_model" "pc104"
[1538365.163] (**) Option "xkb_layout" "us"
[1538365.163] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[1538365.163] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[1538365.163] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[1538365.163] (**) Logitech USB Receiver: (accel) acceleration profile 0
[1538365.163] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[1538365.163] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[1538365.164] (II) config/udev: Adding input device Logitech HID compliant keyboard (/dev/input/event2)
[1538365.164] (**) Logitech HID compliant keyboard: Applying InputClass "evdev keyboard catchall"
[1538365.164] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[1538365.164] (II) Using input driver 'evdev' for 'Logitech HID compliant keyboard'
[1538365.164] (**) Logitech HID compliant keyboard: always reports core events
[1538365.164] (**) evdev: Logitech HID compliant keyboard: Device: "/dev/input/event2"
[1538365.164] (--) evdev: Logitech HID compliant keyboard: Vendor 0x46d Product 0xc30e
[1538365.164] (--) evdev: Logitech HID compliant keyboard: Found keys
[1538365.164] (II) evdev: Logitech HID compliant keyboard: Configuring as keyboard
[1538365.164] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C30E.0003/input/input4/event2"
[1538365.164] (II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD, id 10)
[1538365.164] (**) Option "xkb_rules" "evdev"
[1538365.164] (**) Option "xkb_model" "pc104"
[1538365.164] (**) Option "xkb_layout" "us"
[1538365.164] (II) config/udev: Adding input device Logitech HID compliant keyboard (/dev/input/event3)
[1538365.164] (**) Logitech HID compliant keyboard: Applying InputClass "evdev keyboard catchall"
[1538365.165] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[1538365.165] (II) Using input driver 'evdev' for 'Logitech HID compliant keyboard'
[1538365.165] (**) Logitech HID compliant keyboard: always reports core events
[1538365.165] (**) evdev: Logitech HID compliant keyboard: Device: "/dev/input/event3"
[1538365.165] (--) evdev: Logitech HID compliant keyboard: Vendor 0x46d Product 0xc30e
[1538365.165] (--) evdev: Logitech HID compliant keyboard: Found 20 mouse buttons
[1538365.165] (--) evdev: Logitech HID compliant keyboard: Found keys
[1538365.165] (II) evdev: Logitech HID compliant keyboard: Forcing relative x/y axes to exist.
[1538365.165] (II) evdev: Logitech HID compliant keyboard: Configuring as mouse
[1538365.165] (II) evdev: Logitech HID compliant keyboard: Configuring as keyboard
[1538365.165] (**) evdev: Logitech HID compliant keyboard: YAxisMapping: buttons 4 and 5
[1538365.165] (**) evdev: Logitech HID compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1538365.165] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C30E.0004/input/input5/event3"
[1538365.165] (II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD, id 11)
[1538365.165] (**) Option "xkb_rules" "evdev"
[1538365.165] (**) Option "xkb_model" "pc104"
[1538365.165] (**) Option "xkb_layout" "us"
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event8)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event9)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event10)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.274] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1538365.274] (II) NVIDIA(GPU-0): Vision stereo.
[1538365.308] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1538365.308] (II) NVIDIA(GPU-0): Vision stereo.
[1548947.132] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1548947.132] (II) NVIDIA(GPU-0): Vision stereo.
[1548947.165] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1548947.165] (II) NVIDIA(GPU-0): Vision stereo.
[1550651.850] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550651.850] (II) NVIDIA(GPU-0): Vision stereo.
[1550652.419] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550652.419] (II) NVIDIA(GPU-0): Vision stereo.
[1550741.435] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550741.435] (II) NVIDIA(GPU-0): Vision stereo.
[1550741.477] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550741.477] (II) NVIDIA(GPU-0): Vision stereo.
[1550748.196] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550748.196] (II) NVIDIA(GPU-0): Vision stereo.
[1550748.237] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550748.237] (II) NVIDIA(GPU-0): Vision stereo.
[1550754.197] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550754.197] (II) NVIDIA(GPU-0): Vision stereo.
[1550755.980] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550755.980] (II) NVIDIA(GPU-0): Vision stereo.
[1550756.023] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550756.023] (II) NVIDIA(GPU-0): Vision stereo.
[1550764.914] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550764.914] (II) NVIDIA(GPU-0): Vision stereo.
[1550764.956] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550764.956] (II) NVIDIA(GPU-0): Vision stereo.
[1550771.497] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550771.497] (II) NVIDIA(GPU-0): Vision stereo.
[1550771.538] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550771.538] (II) NVIDIA(GPU-0): Vision stereo.
[1556138.380] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1556138.380] (II) NVIDIA(GPU-0): Vision stereo.
[1556138.413] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1556138.413] (II) NVIDIA(GPU-0): Vision stereo.
[1559190.903] (II) config/udev: removing device Logitech USB Receiver
[1559190.903] (II) evdev: Logitech USB Receiver: Close
[1559190.903] (II) UnloadModule: "evdev"
[1559190.903] (II) systemd-logind: releasing fd for 13:64
[1559190.952] (II) config/udev: removing device Logitech USB Receiver
[1559190.952] (II) evdev: Logitech USB Receiver: Close
[1559190.952] (II) UnloadModule: "evdev"
[1559190.952] (II) systemd-logind: releasing fd for 13:65
[1569521.530] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[1569521.530] (II) No input driver specified, ignoring this device.
[1569521.530] (II) This device may have been added with another device file.
[1569521.559] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[1569521.559] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[1569521.559] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[1569521.559] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[1569521.559] (**) Logitech USB Receiver: always reports core events
[1569521.559] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[1569521.559] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[1569521.559] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[1569521.559] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[1569521.559] (--) evdev: Logitech USB Receiver: Found relative axes
[1569521.559] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[1569521.559] (II) evdev: Logitech USB Receiver: Configuring as mouse
[1569521.559] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[1569521.559] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[1569521.559] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1569521.559] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C521.000B/input/input24/event0"
[1569521.559] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[1569521.559] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[1569521.559] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[1569521.559] (**) Logitech USB Receiver: (accel) acceleration profile 0
[1569521.559] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[1569521.559] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[1569521.560] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[1569521.560] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[1569521.560] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 37 paused 0
[1569521.560] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[1569521.560] (**) Logitech USB Receiver: always reports core events
[1569521.560] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[1569521.560] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[1569521.560] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[1569521.560] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[1569521.560] (--) evdev: Logitech USB Receiver: Found relative axes
[1569521.560] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[1569521.560] (--) evdev: Logitech USB Receiver: Found absolute axes
[1569521.560] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[1569521.560] (--) evdev: Logitech USB Receiver: Found keys
[1569521.560] (II) evdev: Logitech USB Receiver: Configuring as mouse
[1569521.560] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[1569521.560] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[1569521.560] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[1569521.560] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1569521.560] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C521.000C/input/input25/event1"
[1569521.560] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[1569521.560] (**) Option "xkb_rules" "evdev"
[1569521.560] (**) Option "xkb_model" "pc104"
[1569521.560] (**) Option "xkb_layout" "us"
[1569521.560] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[1569521.560] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[1569521.560] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[1569521.560] (**) Logitech USB Receiver: (accel) acceleration profile 0
[1569521.560] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[1569521.560] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[1569840.686] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569840.686] (II) NVIDIA(GPU-0): Vision stereo.
[1569840.776] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569840.776] (II) NVIDIA(GPU-0): Vision stereo.
[1569841.014] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569841.014] (II) NVIDIA(GPU-0): Vision stereo.
[1569841.347] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569841.347] (II) NVIDIA(GPU-0): Vision stereo.
[1569841.380] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569841.380] (II) NVIDIA(GPU-0): Vision stereo.
[1569844.089] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569844.089] (II) NVIDIA(GPU-0): Vision stereo.
[1569862.704] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569862.704] (II) NVIDIA(GPU-0): Vision stereo.
[1569865.088] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569865.088] (II) NVIDIA(GPU-0): Vision stereo.
[1569865.124] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569865.124] (II) NVIDIA(GPU-0): Vision stereo.
[1570601.645] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1570601.645] (II) NVIDIA(GPU-0): Vision stereo.
[1570601.678] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1570601.678] (II) NVIDIA(GPU-0): Vision stereo.
[1571210.304] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571210.304] (II) NVIDIA(GPU-0): Vision stereo.
[1571210.337] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571210.337] (II) NVIDIA(GPU-0): Vision stereo.
[1571223.269] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571223.269] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.347] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.347] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.398] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.398] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.557] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.557] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.954] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.954] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.987] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.987] (II) NVIDIA(GPU-0): Vision stereo.
[1571235.070] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571235.070] (II) NVIDIA(GPU-0): Vision stereo.
[1571244.821] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571244.821] (II) NVIDIA(GPU-0): Vision stereo.
[1571246.208] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571246.208] (II) NVIDIA(GPU-0): Vision stereo.
[1571246.242] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571246.242] (II) NVIDIA(GPU-0): Vision stereo.
[1571995.707] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571995.707] (II) NVIDIA(GPU-0): Vision stereo.
[1571995.740] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571995.740] (II) NVIDIA(GPU-0): Vision stereo.
[1572958.193] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1572958.193] (II) NVIDIA(GPU-0): Vision stereo.
[1572958.226] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1572958.226] (II) NVIDIA(GPU-0): Vision stereo.
[1572990.958] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1572990.958] (II) NVIDIA(GPU-0): Vision stereo.
[1574042.403] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574042.403] (II) NVIDIA(GPU-0): Vision stereo.
[1574042.437] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574042.437] (II) NVIDIA(GPU-0): Vision stereo.
[1574461.211] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574461.211] (II) NVIDIA(GPU-0): Vision stereo.
[1574461.244] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574461.244] (II) NVIDIA(GPU-0): Vision stereo.
[1574854.577] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574854.577] (II) NVIDIA(GPU-0): Vision stereo.
[1574854.611] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574854.611] (II) NVIDIA(GPU-0): Vision stereo.
[1574920.467] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574920.467] (II) NVIDIA(GPU-0): Vision stereo.
[1574920.501] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574920.501] (II) NVIDIA(GPU-0): Vision stereo.
[1575456.776] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1575456.776] (II) NVIDIA(GPU-0): Vision stereo.
[1614848.948] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614848.948] (II) NVIDIA(GPU-0): Vision stereo.
[1614848.995] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614848.995] (II) NVIDIA(GPU-0): Vision stereo.
[1614849.072] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614849.072] (II) NVIDIA(GPU-0): Vision stereo.
[1614849.368] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614849.368] (II) NVIDIA(GPU-0): Vision stereo.
[1614849.402] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614849.402] (II) NVIDIA(GPU-0): Vision stereo.
[1614850.513] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614850.513] (II) NVIDIA(GPU-0): Vision stereo.
[1614860.376] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614860.377] (II) NVIDIA(GPU-0): Vision stereo.
[1614861.767] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614861.767] (II) NVIDIA(GPU-0): Vision stereo.
[1614861.801] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614861.801] (II) NVIDIA(GPU-0): Vision stereo.
[1615455.018] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1615455.018] (II) NVIDIA(GPU-0): Vision stereo.
[1615455.051] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1615455.051] (II) NVIDIA(GPU-0): Vision stereo.
[1615466.381] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1615466.381] (II) NVIDIA(GPU-0): Vision stereo.
[1635286.921] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635286.921] (II) NVIDIA(GPU-0): Vision stereo.
[1635286.968] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635286.968] (II) NVIDIA(GPU-0): Vision stereo.
[1635287.050] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635287.050] (II) NVIDIA(GPU-0): Vision stereo.
[1635287.341] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635287.341] (II) NVIDIA(GPU-0): Vision stereo.
[1635287.374] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635287.374] (II) NVIDIA(GPU-0): Vision stereo.
[1635288.502] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635288.502] (II) NVIDIA(GPU-0): Vision stereo.
[1635300.490] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635300.490] (II) NVIDIA(GPU-0): Vision stereo.
[1635302.609] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635302.609] (II) NVIDIA(GPU-0): Vision stereo.
[1635302.642] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635302.643] (II) NVIDIA(GPU-0): Vision stereo.
[1635587.035] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635587.035] (II) NVIDIA(GPU-0): Vision stereo.
[1635587.068] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635587.068] (II) NVIDIA(GPU-0): Vision stereo.
[1635789.386] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635789.386] (II) NVIDIA(GPU-0): Vision stereo.
[1635789.419] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635789.419] (II) NVIDIA(GPU-0): Vision stereo.
[1636036.535] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636036.535] (II) NVIDIA(GPU-0): Vision stereo.
[1636036.568] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636036.568] (II) NVIDIA(GPU-0): Vision stereo.
[1636273.449] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636273.449] (II) NVIDIA(GPU-0): Vision stereo.
[1636273.482] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636273.482] (II) NVIDIA(GPU-0): Vision stereo.
[1636497.080] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636497.080] (II) NVIDIA(GPU-0): Vision stereo.
[1636497.113] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636497.113] (II) NVIDIA(GPU-0): Vision stereo.
[1636750.139] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636750.139] (II) NVIDIA(GPU-0): Vision stereo.
[1636750.172] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636750.172] (II) NVIDIA(GPU-0): Vision stereo.
[1637086.847] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637086.847] (II) NVIDIA(GPU-0): Vision stereo.
[1637086.881] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637086.881] (II) NVIDIA(GPU-0): Vision stereo.
[1637141.213] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637141.213] (II) NVIDIA(GPU-0): Vision stereo.
[1637141.246] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637141.246] (II) NVIDIA(GPU-0): Vision stereo.
[1637148.282] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637148.282] (II) NVIDIA(GPU-0): Vision stereo.
[1637148.316] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637148.316] (II) NVIDIA(GPU-0): Vision stereo.
[1637297.819] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637297.819] (II) NVIDIA(GPU-0): Vision stereo.
[1637297.852] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637297.852] (II) NVIDIA(GPU-0): Vision stereo.
[1637382.416] (EE)
[1637382.416] (EE) Backtrace:
[1637382.461] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x594276]
[1637382.461] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x1983c9) [0x5983c9]
[1637382.461] (EE) 2: /usr/lib/libc.so.6 (0x7f58390c7000+0x33b20) [0x7f58390fab20]
[1637382.461] (EE) 3: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0xe55e1) [0x7f583236f5e1]
[1637382.461] (EE) 4: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0x5c9502) [0x7f5832853502]
[1637382.461] (EE) 5: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0x5cad0a) [0x7f5832854d0a]
[1637382.461] (EE) 6: /usr/bin/Xorg.bin (0x400000+0x1870c7) [0x5870c7]
[1637382.461] (EE) 7: /usr/bin/Xorg.bin (0x400000+0x187a15) [0x587a15]
[1637382.461] (EE) 8: /usr/bin/Xorg.bin (miWideLine+0x46c) [0x589e0c]
[1637382.461] (EE) 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0x5ce480) [0x7f5832858480]
[1637382.461] (EE) 10: /usr/bin/Xorg.bin (miPolySegment+0x3e) [0x5815ae]
[1637382.461] (EE) 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0x5ce931) [0x7f5832858931]
[1637382.461] (EE) 12: /usr/bin/Xorg.bin (0x400000+0x11cb9d) [0x51cb9d]
[1637382.461] (EE) 13: /usr/bin/Xorg.bin (0x400000+0x33d7a) [0x433d7a]
[1637382.461] (EE) 14: /usr/bin/Xorg.bin (0x400000+0x37807) [0x437807]
[1637382.461] (EE) 15: /usr/bin/Xorg.bin (0x400000+0x3b9a6) [0x43b9a6]
[1637382.461] (EE) 16: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f58390e7040]
[1637382.461] (EE) 17: /usr/bin/Xorg.bin (0x400000+0x25dce) [0x425dce]
[1637382.461] (EE)
[1637382.461] (EE) Segmentation fault at address 0x7f583afcb000
[1637382.461] (EE)
Fatal server error:
[1637382.461] (EE) Caught signal 11 (Segmentation fault). Server aborting
[1637382.461] (EE)
[1637382.461] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[1637382.461] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[1637382.461] (EE)
After a reboot, things are back to normal again, but I never found out the reason for this. I'm open to suggestions what might went wrong.
Current hardware: https://www.smirky.net/info/You're not alone on this it seems, a quick search lead me to an older thread on nVidia forums where several users are complaining about it and links to other threads. Some say that changing minimal powermizer state from 0 to 1 solved it for them (see last post of the thread).
There is also this, and to be honest, it reminds me of random blackscreens I was getting on my 8600m GT and a 260GTX until the screen stayed black not even showing the BIOS screen (PC still booted fine though). In the end I solved it by "baking" my GPUs to re-solder the chip to the mainboard. Both continued to work fine since then. The 8600m GT runs on arch now as you can see from my signature, and no problems with it so far.
May I also add I find the error message sounds hilarious.
edit: found this.
Last edited by Soukyuu (2015-01-07 13:19:45) -
[SOLVED] Bumblebee: Failed to initialize GPU with Lenovo ThinkPad W530
SOLVED: See post #20
After years, I decided to come back to the wonderful distro, Arch and back to the forums. Yay!
However, I installed Arch to my new laptop - Lenovo ThinkPad W530 and it uses NVIDIA Quadro K1000M alongside Intel graphics with Optimus technology. Arch is running fine, but I cannot run applications through optirun and I get:
[exitium@rambutan ~]$ optirun -vv nvidia-settings
[ 485.536478] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 485.536909] [DEBUG]optirun version 3.2.1 starting...
[ 485.536922] [DEBUG]Active configuration:
[ 485.536927] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 485.536931] [DEBUG] X display: :8
[ 485.536934] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 485.536938] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 485.536941] [DEBUG] Accel/display bridge: auto
[ 485.536945] [DEBUG] VGL Compression: proxy
[ 485.536948] [DEBUG] VGLrun extra options:
[ 485.536952] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 485.536972] [DEBUG]Using auto-detected bridge virtualgl
[ 485.537190] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 485.537204] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 485.537209] [DEBUG]Socket closed.
[ 485.537223] [ERROR]Aborting because fallback start is disabled.
[ 485.537229] [DEBUG]Killing all remaining processes.
As seen, it says "Failed to initialize the NVIDIA GPU". I have tried different solutions found from these forums and several other places but none of them have worked - the problem remains same. Does anyone have idea how I could fix this? I read somewhere else that there could be issues with newest nvidia drivers - is this possible?
bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
Option "UseDisplayDevice" "none"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
Thank you in advance!
Last edited by Exitium (2013-12-18 11:29:54)Hi!
Exactly the same issue here. Notebook -> Thinkpad W530
Currently running on:
linux 3.11.3-1
nvidia 325.15-8
nvidia-utils 325.15-1
bbswitch 0.7-14
Error:
username@hostname ~ $ optirun -vv nvidia-settings
[ 839.449203] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 839.449495] [INFO]Configured driver: nvidia
[ 839.449729] [DEBUG]optirun version 3.2.1 starting...
[ 839.449774] [DEBUG]Active configuration:
[ 839.449817] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 839.449836] [DEBUG] X display: :8
[ 839.449856] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 839.449875] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 839.449890] [DEBUG] Accel/display bridge: auto
[ 839.449909] [DEBUG] VGL Compression: proxy
[ 839.449936] [DEBUG] VGLrun extra options:
[ 839.449953] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 839.449996] [DEBUG]Using auto-detected bridge virtualgl
[ 839.450294] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 839.450344] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 839.450373] [DEBUG]Socket closed.
[ 839.450398] [ERROR]Aborting because fallback start is disabled.
[ 839.450419] [DEBUG]Killing all remaining processes.
dmesg output:
[ 81.162604] bbswitch: enabling discrete graphics
[ 81.396637] pci 0000:01:00.0: power state changed by ACPI to D0
[ 81.396663] thinkpad_acpi: EC reports that Thermal Table has changed
[ 81.483200] nvidia: module license 'NVIDIA' taints kernel.
[ 81.483205] Disabling lock debugging due to kernel taint
[ 81.488096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 81.488289] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 81.488294] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
[ 81.665938] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
[ 81.670434] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670528] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670594] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670659] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670723] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.671192] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.671258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.879826] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.905471] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 85.905479] NVRM: os_pci_init_handle: invalid context!
[ 85.905481] NVRM: os_pci_init_handle: invalid context!
[ 85.905486] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 85.905490] NVRM: os_pci_init_handle: invalid context!
[ 85.905491] NVRM: os_pci_init_handle: invalid context!
[ 85.930135] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.930442] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.930719] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.930990] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.931258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.931526] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.931794] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932062] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932329] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932595] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932862] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933129] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933396] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933662] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933942] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934197] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934452] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934706] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935215] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935469] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935722] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935976] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.940508] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
[ 85.940517] NVRM: rm_init_adapter(0) failed
xorg.conf.nvidia:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bu … PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau -
[Solved] Systemd suspend fails everytime
Hi,
I've been using Arch Linux on my laptop for a while now and suddenly my laptop would not go into suspend anymore.
My laptop is Asus UX32VD.
Here's the whole journalctl between suspend starting and suspend failing.
I also get this at bootup:
[drm:intel_dp_start_link_train] *ERROR* too many voltage retries, give up
some while ago the iSSD in my laptop failed but it was later that the computer stopped suspending.
Does anyone see the problem?
Thanks.
Edit: When I try to mount the iSSD partitions I get the same error messages that begin with "ata2.00" so those errors seem to be connected to the iSSD drive. Now, I can't disable the drive in bios, is it possible to make arch linux ignore it all together?
Edit2: Arch Linux is installed on sda (ata1) and the bad drive is sdb (ata2)
Edit3: The broken ssd was the culprit. When I write 1 to /sys/block/sdb/device/delete the laptop suspends correctly.
So I made the following systemd service:
[Unit]
Description=Disable my fault ssd drive at suspend
[Service]
Type=OneShot
ExecStart=/bin/sh -c 'echo 1 > /sys/block/sdb/device/delete'
[Install]
WantedBy=sleep.target
Changing status to solved
Last edited by granra (2014-04-18 23:01:57)Rexilion wrote:What is stopping you from taking it out?
It's soldered to the motherboard. -
[SOLVED] DPMS Failed on Standby / Suspend / Off
Hi Everyone,
I am trying to get my laptop's screen to shut off after a while, but I keep running into Problems.
I am running the latest ARCH version with KDE 4.2.x on a Toshiba Satego X200 - 21U Laptop with an Nvidia 8700M GT gfx card. I set Power Devil to control my screen and set the Standby / Suspend / Off times to 5min / 10 min / 15 min. Unfortunately, even with DPMS enabled in my xorg.conf my screen does neither of those. Once, the display went into standby but the backlight stayed on...
Here is some information about my current setup:
1. User is in power / video group.
2. xset dpms force standby / suspend / off does not work
a.: Xorg.log:
(WW) NVIDIA(0): Failed to set DPMS to off for LPL (DFP-0)
(WW) NVIDIA(0): Failed to set DPMS to on for LPL (DFP-0)
(WW) NVIDIA(0): Failed to set DPMS to standby for LPL (DFP-0)
(WW) NVIDIA(0): Failed to set DPMS to on for LPL (DFP-0)
3. Xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Wed May 27 01:58:49 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
4. Running the newest nvidia driver 185.18.14
5. vbetool dpms off does NOT work either
Help would be greatly appreciated.
Thank you very much for your time
Regards
Kenny
Last edited by knysng (2009-08-02 12:21:58)Hi,
I tried XFCE and everything behaves exactly the same; nothing has chanced.
Here is a little snippit from the Xorg.0.log:
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms" "TRUE"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "VBEModes" is not used
(==) RandR enabled
It shows that DPMS is, infact, enabled for NVIDIA. so that should not be the problem. This is all really strange and I don't know what else there can be done. Please let me know if you have any ideas regarding turning off the backlight on a Toshiba Satego X200-21U.
Also, I am running the 86_64 architecture version of Arch... could that be the problem?
Regards
Kenny -
[SOLVED] Suspend to ram / disk not working in newer kernels
Hi all,
this puzzles me for a while:
My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
echo mem > /sys/power/state
which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
1. lspci output
harvey@obelix ~ $ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
2. lsmod output of 2012.07.17_04-00-01:
harvey@obelix ~ $ lsmod
Module Size Used by
fuse 68768 0
tun 15297 0
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
btusb 11764 0
joydev 9991 0
bluetooth 190551 22 bnep,btusb,rfcomm
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
snd_hda_intel 24053 3
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
microcode 12185 0
i7core_edac 17477 0
snd_hwdep 6300 1 snd_hda_codec
i2c_i801 8180 0
iTCO_wdt 12813 0
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
r8169 49386 0
coretemp 5654 0
edac_core 36656 3 i7core_edac
iTCO_vendor_support 1929 1 iTCO_wdt
serio_raw 4653 0
pcspkr 1899 0
snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
mii 4123 1 r8169
snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
acpi_cpufreq 5933 0
mperf 1235 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
usbhid 36430 1 hid_logitech
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
ata_piix 23160 5
crc32c_intel 1987 0
ahci 20549 0
libahci 20023 1 ahci
ata_generic 3295 0
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
uhci_hcd 23372 0
xhci_hcd 81440 0
ehci_hcd 40994 0
usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784289 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64288 1 nouveau
drm 208926 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
ext4 424175 4
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
3. /var/log/pm-suspend.log of a not working suspend
Initial commandline parameters:
Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
ext4 424175 3
jbd2 73919 1 ext4
mbcache 5977 1 ext4
btusb 11764 0
bluetooth 190551 22 bnep,btusb,rfcomm
crc16 1359 2 ext4,bluetooth
joydev 9991 0
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
microcode 12185 0
coretemp 5654 0
serio_raw 4653 0
snd_hda_intel 24053 5
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
pcspkr 1899 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
r8169 49386 0
i7core_edac 17477 0
snd_timer 18966 1 snd_pcm
edac_core 36656 3 i7core_edac
mii 4123 1 r8169
snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
iTCO_wdt 12813 0
i2c_i801 8180 0
soundcore 5410 1 snd
iTCO_vendor_support 1929 1 iTCO_wdt
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
btrfs 710578 1
libcrc32c 1002 1 btrfs
zlib_deflate 20436 1 btrfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
usbhid 36430 1 hid_logitech
usb_storage 44760 0
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 5
ata_generic 3295 0
uhci_hcd 23404 0
crc32c_intel 1987 1
ahci 20549 0
libahci 20023 1 ahci
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
xhci_hcd 81472 0
ehci_hcd 41026 0
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784321 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64320 1 nouveau
drm 208958 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
total used free shared buffers cached
Mem: 8173500 884060 7289440 0 3764 405872
-/+ buffers/cache: 474424 7699076
Swap: 8386556 0 8386556
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jul 17 11:21:18 CEST 2012: performing suspend
This seems to be a kernel bug. Any input?
Harvey
Last edited by Harey (2012-08-06 13:51:49)Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
BUSES="0000:00:1a.7 0000:00:1d.7"
case "${1}" in
hibernate|suspend)
# Switch USB buses off
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
done
resume|thaw)
# Switch USB buses back on
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
done
esac
The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
Harvey
Last edited by Harey (2012-08-06 13:52:51) -
Suspends fails the first time, but succeeds the second time
Hi all,
I am running Arch Linux on my Dell XPS 15 9530 laptop, and overall I am very happy with the combination. I have however had some issues with suspending.
The problem is that the first time I try to suspend the machine it seems to go to sleep, but then two seconds later it automatically wakes up again. If I then immediately try again to suspend, it works (it does not wake up automatically). Does anyone know what could be going on, and how this can be fixed?
Usually I suspend from my gnome 3 desktop, but I have also tried to suspend directly using 'systemctl suspend' without having an X server running, and the result is exactly the same. I have tried a few versions of the vanilla kernel, but also the linux-lts and the linux-ck images, but to no avail.
Here is the output from dmesg, where suspend fails:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.543 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 334.544 msecs
PM: late suspend of devices complete after 0.201 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.944 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.424 msecs
PM: early resume of devices complete after 0.091 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
PM: resume of devices complete after 2769.054 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
and here where suspend succeeds:
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.412 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 780.265 msecs
PM: late suspend of devices complete after 0.387 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.988 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.411 msecs
PM: early resume of devices complete after 0.097 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
PM: resume of devices complete after 2801.389 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
systemd[1]: Requested transaction contradicts existing jobs: File exists
systemd[1]: Service sleep.target is not needed anymore. Stopping.
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
It seems to me like the only real difference has to do with the xhci_hcd errors, perhaps the following:
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
Any input or help would be highly appreciated.Rexilion wrote:Maybe you could confirm your suspicion by rmmoding xhci before suspend and modprobing it after resume?
Thanks for the response. I should have said so, but I had already tried that, but without any luck. It seems like it doesn't change anything. -
[Solved]Control of automatic GPU switching in Linux 3.13
I'm using the Linux Kernel 3.13 of the testing repository, I have a laptop with Hybrid Graphics ATI/Intel:
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6730M/6770M/7690M XT] (rev ff)
I use the vgaswitcheroo method to shutdown the discrete GPU, it generally show this:
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Off:0000:01:00.0
But with the New Kernel Feature Automatic GPU Switching I can't shutdown the Discrete GPU of my Hybrid Graphics System, I got this output:
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :DynPwr:0000:01:00.0
I have searched for the power_dpm_state in /sys/class/drm for change to "battery" mode but it file doesn't exist (With the Kernel 3.12 I can set up DPM to "battery" mode)
I don't want to use the Discrete GPU on Linux to save energy and with the DynPwr I got about 60 ͦ C
How Can I set up my Hybrid Graphics Cards for reduce the temperature?
Thanks!
Last edited by josejacomeb (2014-02-23 00:32:33)denspirit wrote:
Any line with something like
ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP]
clearly seems to be DSDT bug - a bug in your notebook's low-level firmware. It's nearly insolvable.
You may try to update BIOS, or decompose@recompile DSDT by yourself.
I have not succeeded in the latter task, though in my case it just can't remember brightness between reboots and lockups GPU if I dare to switch it.
By the way, have you seen the Lenovo S540 wiki page on ArchWiki? It suggests to disable modesetting in intel videocard ( kernel parameter intel.modeset=0 means exactly that).
And I can't say anything about stack trace (!) in your dmesg. Maybe it's related to above intel modesetting.
Yes:
Mar 30 20:12:28 lenovo1 kernel: ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20131
Mar 30 20:12:28 lenovo1 kernel: ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node ffff88022387ac80
Mar 30 20:12:28 lenovo1 kernel: ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20131
Mar 30 20:12:28 lenovo1 kernel: ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node ffff88022387ac80
Mar 30 20:12:28 lenovo1 kernel: mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
Bios is latest available!
I'll have a look at disabling Intel nomodeset and test later or tomorrow and report back. (This is a dual boot uefi machine booting via rEFInd)
Edit: booting the 3.13.7 kernel with intel,modeset=0 gives the same blank screen on graphical boot but the kernel loads fine - access vis ssh to downgrade the kernel to 3.13.6 and boot with the same parameter works fine though. So there remains a problem with the graphical boot for kernel .13.7
For the working 3.13.6 kernel the Xorg log is:
$ cat /var/log/Xorg.0.log
[ 11.880]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 11.880] X Protocol Version 11, Revision 0
[ 11.880] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 11.880] Current Operating System: Linux lenovo1 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 11.880] Kernel command line: \boot\vmlinuz-linux root=PARTUUID=a01aa42a-8ece-4584-a632-bea1f042c80a ro rootfstype=ext4 systemd.unit=graphical.target initrd=boot\initramfs-linux.img
[ 11.880] Build Date: 09 January 2014 08:47:24AM
[ 11.880]
[ 11.880] Current version of pixman: 0.32.4
[ 11.880] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.880] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.880] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 30 21:37:13 2014
[ 11.882] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.882] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.884] (==) No Layout section. Using the first Screen section.
[ 11.884] (==) No screen section available. Using defaults.
[ 11.884] (**) |-->Screen "Default Screen Section" (0)
[ 11.884] (**) | |-->Monitor "<default monitor>"
[ 11.885] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.885] (==) Automatically adding devices
[ 11.885] (==) Automatically enabling devices
[ 11.885] (==) Automatically adding GPU devices
[ 11.892] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 11.892] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.892] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.892] (II) Loader magic: 0x804c80
[ 11.892] (II) Module ABI versions:
[ 11.892] X.Org ANSI C Emulation: 0.4
[ 11.892] X.Org Video Driver: 15.0
[ 11.892] X.Org XInput driver : 20.0
[ 11.892] X.Org Server Extension : 8.0
[ 11.892] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11.892] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.893] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:2216 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 11.893] (--) PCI: (0:6:0:0) 1002:6660:17aa:2216 rev 0, Mem @ 0xd0000000/268435456, 0xf0400000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 11.893] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.893] Initializing built-in extension Generic Event Extension
[ 11.893] Initializing built-in extension SHAPE
[ 11.893] Initializing built-in extension MIT-SHM
[ 11.893] Initializing built-in extension XInputExtension
[ 11.893] Initializing built-in extension XTEST
[ 11.893] Initializing built-in extension BIG-REQUESTS
[ 11.893] Initializing built-in extension SYNC
[ 11.893] Initializing built-in extension XKEYBOARD
[ 11.893] Initializing built-in extension XC-MISC
[ 11.893] Initializing built-in extension SECURITY
[ 11.893] Initializing built-in extension XINERAMA
[ 11.893] Initializing built-in extension XFIXES
[ 11.894] Initializing built-in extension RENDER
[ 11.894] Initializing built-in extension RANDR
[ 11.894] Initializing built-in extension COMPOSITE
[ 11.894] Initializing built-in extension DAMAGE
[ 11.894] Initializing built-in extension MIT-SCREEN-SAVER
[ 11.894] Initializing built-in extension DOUBLE-BUFFER
[ 11.894] Initializing built-in extension RECORD
[ 11.894] Initializing built-in extension DPMS
[ 11.894] Initializing built-in extension Present
[ 11.894] Initializing built-in extension DRI3
[ 11.894] Initializing built-in extension X-Resource
[ 11.894] Initializing built-in extension XVideo
[ 11.894] Initializing built-in extension XVideo-MotionCompensation
[ 11.894] Initializing built-in extension XFree86-VidModeExtension
[ 11.894] Initializing built-in extension XFree86-DGA
[ 11.894] Initializing built-in extension XFree86-DRI
[ 11.894] Initializing built-in extension DRI2
[ 11.894] (II) "glx" will be loaded by default.
[ 11.894] (II) LoadModule: "dri2"
[ 11.894] (II) Module "dri2" already built-in
[ 11.894] (II) LoadModule: "glamoregl"
[ 11.896] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 11.907] (II) Module glamoregl: vendor="X.Org Foundation"
[ 11.907] compiled for 1.15.0, module version = 0.6.0
[ 11.907] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.907] (II) LoadModule: "glx"
[ 11.907] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.909] (II) Module glx: vendor="X.Org Foundation"
[ 11.909] compiled for 1.15.0, module version = 1.0.0
[ 11.909] ABI class: X.Org Server Extension, version 8.0
[ 11.909] (==) AIGLX enabled
[ 11.909] Loading extension GLX
[ 11.909] (==) Matched intel as autoconfigured driver 0
[ 11.909] (==) Matched intel as autoconfigured driver 1
[ 11.909] (==) Matched modesetting as autoconfigured driver 2
[ 11.909] (==) Matched fbdev as autoconfigured driver 3
[ 11.909] (==) Matched vesa as autoconfigured driver 4
[ 11.909] (==) Assigned the driver to the xf86ConfigLayout
[ 11.909] (II) LoadModule: "intel"
[ 11.909] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 11.911] (II) Module intel: vendor="X.Org Foundation"
[ 11.911] compiled for 1.15.0, module version = 2.99.911
[ 11.911] Module class: X.Org Video Driver
[ 11.911] ABI class: X.Org Video Driver, version 15.0
[ 11.911] (II) LoadModule: "modesetting"
[ 11.911] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.912] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.912] compiled for 1.15.0, module version = 0.8.1
[ 11.912] Module class: X.Org Video Driver
[ 11.912] ABI class: X.Org Video Driver, version 15.0
[ 11.912] (II) LoadModule: "fbdev"
[ 11.912] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.912] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.912] compiled for 1.15.0, module version = 0.4.4
[ 11.912] Module class: X.Org Video Driver
[ 11.912] ABI class: X.Org Video Driver, version 15.0
[ 11.912] (II) LoadModule: "vesa"
[ 11.912] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.913] (II) Module vesa: vendor="X.Org Foundation"
[ 11.913] compiled for 1.15.0, module version = 2.3.2
[ 11.913] Module class: X.Org Video Driver
[ 11.913] ABI class: X.Org Video Driver, version 15.0
[ 11.913] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 11.913] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 11.913] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 11.913] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 11.913] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.913] (II) FBDEV: driver for framebuffer: fbdev
[ 11.913] (II) VESA: driver for VESA chipsets: vesa
[ 11.913] (++) using VT number 7
[ 11.919] (WW) Falling back to old probe method for modesetting
[ 11.919] (EE) open /dev/dri/card0: Invalid argument
[ 11.919] (WW) Falling back to old probe method for fbdev
[ 11.919] (II) Loading sub module "fbdevhw"
[ 11.919] (II) LoadModule: "fbdevhw"
[ 11.919] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 11.920] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 11.920] compiled for 1.15.0, module version = 0.0.2
[ 11.920] ABI class: X.Org Video Driver, version 15.0
[ 11.920] (WW) Falling back to old probe method for vesa
[ 11.920] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[ 11.920] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 11.920] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.920] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 11.920] (==) intel(0): RGB weight 888
[ 11.920] (==) intel(0): Default visual is TrueColor
[ 11.920] (**) intel(0): Framebuffer tiled
[ 11.920] (**) intel(0): Pixmaps tiled
[ 11.920] (**) intel(0): "Tear free" disabled
[ 11.920] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 11.920] (II) intel(0): Output eDP1 has no monitor section
[ 11.920] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output eDP1
[ 11.920] (II) intel(0): Output DP1 has no monitor section
[ 11.920] (II) intel(0): Output HDMI1 has no monitor section
[ 11.920] (II) intel(0): Output HDMI2 has no monitor section
[ 11.920] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 11.921] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 11.921] (==) intel(0): DPI set to (96, 96)
[ 11.921] (II) Loading sub module "dri2"
[ 11.921] (II) LoadModule: "dri2"
[ 11.921] (II) Module "dri2" already built-in
[ 11.921] (II) UnloadModule: "modesetting"
[ 11.921] (II) Unloading modesetting
[ 11.921] (II) UnloadModule: "fbdev"
[ 11.921] (II) Unloading fbdev
[ 11.921] (II) UnloadSubModule: "fbdevhw"
[ 11.921] (II) Unloading fbdevhw
[ 11.921] (II) UnloadModule: "vesa"
[ 11.921] (II) Unloading vesa
[ 11.921] (==) Depth 24 pixmap format is 32 bpp
[ 11.923] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 11.923] (==) intel(0): Backing store enabled
[ 11.923] (==) intel(0): Silken mouse enabled
[ 11.923] (II) intel(0): HW Cursor enabled
[ 11.923] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 11.924] (==) intel(0): DPMS enabled
[ 11.924] (II) intel(0): [DRI2] Setup complete
[ 11.924] (II) intel(0): [DRI2] DRI driver: i965
[ 11.924] (II) intel(0): [DRI2] VDPAU driver: i965
[ 11.924] (II) intel(0): direct rendering: DRI2 Enabled
[ 11.924] (==) intel(0): hotplug detection: "enabled"
[ 11.924] (--) RandR disabled
[ 11.943] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 11.943] (II) AIGLX: enabled GLX_ARB_create_context
[ 11.943] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 11.943] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 11.943] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 11.943] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 11.943] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 11.943] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 11.943] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 11.943] (II) AIGLX: Loaded and initialized i965
[ 11.943] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 11.951] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 11.970] (II) intel(0): Setting screen physical size to 508 x 285
[ 12.048] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 12.048] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.048] (II) LoadModule: "evdev"
[ 12.048] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12.049] (II) Module evdev: vendor="X.Org Foundation"
[ 12.049] compiled for 1.15.0, module version = 2.8.2
[ 12.049] Module class: X.Org XInput Driver
[ 12.049] ABI class: X.Org XInput driver, version 20.0
[ 12.049] (II) Using input driver 'evdev' for 'Power Button'
[ 12.049] (**) Power Button: always reports core events
[ 12.049] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 12.049] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.049] (--) evdev: Power Button: Found keys
[ 12.049] (II) evdev: Power Button: Configuring as keyboard
[ 12.049] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 12.049] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12.049] (**) Option "xkb_rules" "evdev"
[ 12.049] (**) Option "xkb_model" "pc104"
[ 12.049] (**) Option "xkb_layout" "gb"
[ 12.063] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 12.063] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12.063] (II) Using input driver 'evdev' for 'Video Bus'
[ 12.063] (**) Video Bus: always reports core events
[ 12.063] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 12.063] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12.063] (--) evdev: Video Bus: Found keys
[ 12.063] (II) evdev: Video Bus: Configuring as keyboard
[ 12.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 12.063] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12.063] (**) Option "xkb_rules" "evdev"
[ 12.063] (**) Option "xkb_model" "pc104"
[ 12.063] (**) Option "xkb_layout" "gb"
[ 12.063] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 12.063] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12.063] (II) Using input driver 'evdev' for 'Video Bus'
[ 12.063] (**) Video Bus: always reports core events
[ 12.063] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 12.063] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12.063] (--) evdev: Video Bus: Found keys
[ 12.063] (II) evdev: Video Bus: Configuring as keyboard
[ 12.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input3/event3"
[ 12.063] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 12.063] (**) Option "xkb_rules" "evdev"
[ 12.063] (**) Option "xkb_model" "pc104"
[ 12.063] (**) Option "xkb_layout" "gb"
[ 12.064] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 12.064] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.064] (II) Using input driver 'evdev' for 'Power Button'
[ 12.064] (**) Power Button: always reports core events
[ 12.064] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 12.064] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.064] (--) evdev: Power Button: Found keys
[ 12.064] (II) evdev: Power Button: Configuring as keyboard
[ 12.064] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 12.064] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 12.064] (**) Option "xkb_rules" "evdev"
[ 12.064] (**) Option "xkb_model" "pc104"
[ 12.064] (**) Option "xkb_layout" "gb"
[ 12.064] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 12.064] (II) No input driver specified, ignoring this device.
[ 12.064] (II) This device may have been added with another device file.
[ 12.064] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 12.064] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event6)
[ 12.064] (II) No input driver specified, ignoring this device.
[ 12.064] (II) This device may have been added with another device file.
[ 12.064] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[ 12.064] (II) No input driver specified, ignoring this device.
[ 12.064] (II) This device may have been added with another device file.
[ 12.065] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event7)
[ 12.065] (II) No input driver specified, ignoring this device.
[ 12.065] (II) This device may have been added with another device file.
[ 12.065] (II) config/udev: Adding input device Integrated Camera (/dev/input/event9)
[ 12.065] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 12.065] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 12.065] (**) Integrated Camera: always reports core events
[ 12.065] (**) evdev: Integrated Camera: Device: "/dev/input/event9"
[ 12.065] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x29d
[ 12.065] (--) evdev: Integrated Camera: Found keys
[ 12.065] (II) evdev: Integrated Camera: Configuring as keyboard
[ 12.065] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input12/event9"
[ 12.065] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 12.065] (**) Option "xkb_rules" "evdev"
[ 12.065] (**) Option "xkb_model" "pc104"
[ 12.065] (**) Option "xkb_layout" "gb"
[ 12.065] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 12.065] (II) No input driver specified, ignoring this device.
[ 12.065] (II) This device may have been added with another device file.
[ 12.065] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 12.065] (II) No input driver specified, ignoring this device.
[ 12.065] (II) This device may have been added with another device file.
[ 12.065] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 12.065] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.065] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 12.065] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12.065] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 12.065] (**) AT Translated Set 2 keyboard: always reports core events
[ 12.065] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[ 12.065] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 12.065] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 12.065] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 12.065] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 12.065] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 12.065] (**) Option "xkb_rules" "evdev"
[ 12.065] (**) Option "xkb_model" "pc104"
[ 12.065] (**) Option "xkb_layout" "gb"
[ 12.066] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 12.066] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 12.066] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 12.066] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 12.066] (II) LoadModule: "synaptics"
[ 12.066] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 12.066] (II) Module synaptics: vendor="X.Org Foundation"
[ 12.066] compiled for 1.15.0, module version = 1.7.4
[ 12.066] Module class: X.Org XInput Driver
[ 12.066] ABI class: X.Org XInput driver, version 20.0
[ 12.066] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 12.066] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 12.066] (**) Option "Device" "/dev/input/event14"
[ 12.160] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 12.160] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5112 (res 42)
[ 12.160] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 3834 (res 42)
[ 12.160] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 12.160] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 12.160] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 12.160] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 12.160] (**) Option "TapButton1" "1"
[ 12.160] (**) Option "TapButton2" "2"
[ 12.160] (**) Option "TapButton3" "3"
[ 12.160] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 12.160] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 12.160] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 12.222] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event14"
[ 12.222] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 12.223] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 12.223] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 12.223] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.046
[ 12.223] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 12.223] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 12.223] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 12.223] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 12.223] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 12.223] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 12.223] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 12.223] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 12.223] (II) No input driver specified, ignoring this device.
[ 12.223] (II) This device may have been added with another device file.
[ 12.224] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event11)
[ 12.224] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 12.224] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 12.224] (**) ThinkPad Extra Buttons: always reports core events
[ 12.224] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event11"
[ 12.224] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 12.224] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 12.224] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 12.224] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event11"
[ 12.224] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 12.224] (**) Option "xkb_rules" "evdev"
[ 12.224] (**) Option "xkb_model" "pc104"
[ 12.224] (**) Option "xkb_layout" "gb"
[ 18.631] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 18.631] (II) No input driver specified, ignoring this device.
[ 18.631] (II) This device may have been added with another device file.
[ 18.632] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 18.632] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 18.632] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 18.632] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 18.632] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 18.632] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 18.632] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 18.632] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 18.632] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 18.632] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 18.632] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 18.632] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.632] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input16/event15"
[ 18.632] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 18.632] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 18.632] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 18.632] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 18.632] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 18.632] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 21.459] (II) intel(0): EDID vendor "AUO", prod id 13549
[ 21.459] (II) intel(0): Printing DDC gathered Modelines:
[ 21.459] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2100 1080 1083 1084 1110 -hsync -vsync (66.7 kHz eP)
Last edited by mcloaked (2014-03-30 20:50:21) -
SOLVED: Suspend not working on a laptop
I have Asus A53U laptop, running all the latest updates and KDE
I can't suspend the system truly, it only really turns the screen off (fan is still running and and the LED is not blinking as it is supposed to)
Running pm-suspend switches me to text mode (tty-like mode), but then apparently gets stuck at "freezing user space processes" .
Looking at pm-suspend.log I get:
enabled, active
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Sun Oct 2 05:37:19 UTC 2011: Finished.
Initial commandline parameters:
Sun Oct 2 05:38:58 UTC 2011: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux cluster 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686 AMD E-350 Processor AuthenticAMD GNU/Linux
Module Size Used by
cryptd 6893 0
aes_i586 6940 1
aes_generic 25670 1 aes_i586
appletalk 22087 0
ipx 16962 0
p8022 855 1 ipx
psnap 1489 2 appletalk,ipx
llc 3029 2 p8022,psnap
p8023 784 1 ipx
ext2 55595 1
radeon 910895 0
ttm 45269 1 radeon
drm_kms_helper 21997 1 radeon
drm 147750 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 4423 1 radeon
snd_hda_codec_realtek 222124 1
snd_hda_codec_hdmi 20068 1
fglrx 2547171 271
snd_hda_intel 19101 6
joydev 7439 0
snd_hda_codec 66954 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
uas 6440 0
arc4 1086 2
ums_realtek 3710 0
snd_hwdep 4942 1 snd_hda_codec
snd_pcm 60015 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 15374 2 snd_pcm
snd 43561 17 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 4986 1 snd
ath9k 75896 0
asus_nb_wmi 1165 0
usb_storage 35247 1 ums_realtek
asus_wmi 11468 1 asus_nb_wmi
sparse_keymap 2628 1 asus_wmi
evdev 7278 8
snd_page_alloc 5837 2 snd_hda_intel,snd_pcm
sg 20982 0
mac80211 191317 1 ath9k
pci_hotplug 22322 1 asus_wmi
battery 8865 0
sp5100_tco 3760 0
ath9k_common 1390 1 ath9k
agpgart 22096 3 ttm,drm,fglrx
i2c_piix4 7084 0
wmi 7199 1 asus_wmi
ath9k_hw 262580 2 ath9k,ath9k_common
r8169 35935 0
ath 11959 2 ath9k,ath9k_hw
serio_raw 3390 0
cfg80211 138492 3 ath9k,mac80211,ath
thermal 6595 0
video 9780 0
ac 2505 0
pcspkr 1375 0
mii 3375 1 r8169
rfkill 12406 2 asus_wmi,cfg80211
button 3646 1 fglrx
k10temp 2139 0
psmouse 66603 0
uvcvideo 67554 1
videodev 70542 1 uvcvideo
media 8545 2 uvcvideo,videodev
i2c_core 16625 6 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4,videodev
cpufreq_ondemand 5056 2
powernow_k8 12077 0
freq_table 2047 2 cpufreq_ondemand,powernow_k8
processor 21876 3 powernow_k8
mperf 1027 1 powernow_k8
ipv6 249881 10
autofs4 19319 2
ext4 337790 2
mbcache 4249 2 ext2,ext4
jbd2 59488 1 ext4
crc16 1069 1 ext4
sr_mod 13244 0
sd_mod 26147 5
cdrom 31277 1 sr_mod
pata_acpi 2388 0
ohci_hcd 19226 0
ehci_hcd 34935 0
ahci 18085 4
libahci 16573 1 ahci
pata_atiixp 2920 0
libata 154449 4 pata_acpi,ahci,libahci,pata_atiixp
scsi_mod 111801 6 uas,usb_storage,sg,sr_mod,sd_mod,libata
usbcore 119612 7 uas,ums_realtek,usb_storage,uvcvideo,ohci_hcd,ehci_hcd
total used free shared buffers cached
Mem: 2709096 1268400 1440696 0 44000 473184
-/+ buffers/cache: 751216 1957880
Swap: 4200992 0 4200992
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend:
/usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
So that's not really helpful. I tried getting the script from here http://thecodecentral.com/2011/01/18/fi … orking-bug which seeme to help many, but then running # pm-suspend gets stuck and the log file is the same except for the added:
Running hook /etc/pm/sleep.d/20_custom-ehci_hcd suspend suspend:
Note that there is no "success" here.
I have acpi installed, I also tried this with acpid. I also have laptop-mode-tools installed and running, tried disabling them, no luck.
What should I do?
EDIT: Nevermind me. After rebooting for the fifth time and adding acpi_sleep=s3_bios to the kernel line, everything now runs smoothly. Won't delete the post in case anyone else has a similar issue.
Last edited by Deusdies (2011-10-02 05:59:07)Well, I finally have it working. I have to test it better, but it seems to work ok. All I have to do was install the omnibook module. I will explain all the steps I've done, maybe it could help someone.
First of all, installed subversion
pacman -S subversion
then, in a folder created under my home
svn co https://omnibook.svn.sourceforge.net/svnroot/omnibook/omnibook/trunk/
and when it finishes
make install
This install the omnibook module.
Then added omnibook to the modules array in rc.conf, and added the next line to /etc/modprobe.conf
options omnibook ectype=12
After that I rebooted my system and, voila!, now it works. A new device appears on the lsusb, hciconfig -a shows the device, and all the bluettoth tools I've test already work flawless. I'm going to edit the title of the post to [solved].
I'm not sure at all about if that method is the best one, so please feel free to propose corrections/improvements to it.
Thank you all -
[SOLVED] CUPS fails to find my USB-connected Lexmark X543dn
Hi there!
I just installed arch off the netinstall CD. Right now I'm struggling to get it recognize my printer. I fired up rekonq at localhost:631 and clicked my way to Add Printer. When prompted, I provided root's name and password. This brings me to the Add Printer page with the "hourglass-like" circle spinning while it's searching for printers. It doesn't find anything.
At connecting the printer to my USB port I get the following in /var/log/messages.log:
Apr 2 12:14:40 Godot kernel: usb 1-3: new high speed USB device using ehci_hcd and address 6
Apr 2 12:14:40 Godot kernel: usb 1-3: configuration #1 chosen from 1 choice
Apr 2 12:14:40 Godot kernel: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x043D pid 0x0121
Apr 2 12:14:40 Godot kernel: generic-usb 0003:043D:0121.0004: hiddev1,hidraw0: USB HID v1.00 Device [Lexmark International Lexmark X543] on usb-0000:00:02.2-3/input2
As per http://wiki.archlinux.org/index.php/Cups#Kernel_modules I also tried rmmodding usblp. This doesn't change anything in CUPS' web frontend. However, the modules seems to get reloaded:
Apr 2 12:16:45 Godot kernel: usb 1-4: new high speed USB device using ehci_hcd and address 7
Apr 2 12:16:45 Godot kernel: usb 1-4: configuration #1 chosen from 1 choice
Apr 2 12:16:45 Godot kernel: generic-usb 0003:043D:0121.0005: hiddev0,hidraw0: USB HID v1.00 Device [Lexmark International Lexmark X543] on usb-0000:00:02.2-4/input2
Apr 2 12:16:45 Godot kernel: usblp1: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x043D pid 0x0121
Apr 2 12:16:45 Godot kernel: usbcore: registered new interface driver usblp
and it also appears again in lsmod. So I tried blacklisting usblp, which again doesn't change anything in CUPS' frontend. However, it complains in /var/log/messages:
Apr 2 12:18:25 Godot kernel: usb 1-4: new high speed USB device using ehci_hcd and address 8
Apr 2 12:18:25 Godot kernel: usb 1-4: configuration #1 chosen from 1 choice
Apr 2 12:18:25 Godot kernel: generic-usb 0003:043D:0121.0006: hiddev0,hidraw0: USB HID v1.00 Device [Lexmark International Lexmark X543] on usb-0000:00:02.2-4/input2
Apr 2 12:18:25 Godot load-modules.sh: Not loading module 'usblp' for alias 'usb:v043Dp0121d0000dc00dsc00dp00ic07isc01ip02' because it is blacklisted
Apr 2 12:18:25 Godot load-modules.sh: 'usb:v043Dp0121d0000dc00dsc00dp00icFFiscFFipFF' is not a valid module or alias name
I set cupsd.conf's logging level to debug, which yields the following in errors_log. At 12:22:30 I pointed rekonq at localhost:631/admin, at 12:22:32 I clicked "Add printer":
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 16 POST /admin/ HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdSetBusyState: Active clients
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
D [02/Apr/2010:12:22:30 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@Godot"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.3"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[13] = "USER=root"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[17] = "LANG=de.UTF8"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[18] = "REDIRECT_STATUS=1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[20] = "SERVER_NAME=localhost"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[21] = "SERVER_PORT=631"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[22] = "REMOTE_ADDR=127.0.0.1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[23] = "REMOTE_HOST=localhost"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[24] = "SCRIPT_NAME=/admin/"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[26] = "SERVER_PROTOCOL=HTTP/1.1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[27] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; U; Linux; de-DE) AppleWebKit/532.4 (KHTML, like Gecko) rekonq Safari/532.4"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[28] = "HTTP_REFERER=http://localhost:631/admin"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[29] = "REQUEST_METHOD=POST"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[30] = "CONTENT_LENGTH=14"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[31] = "CONTENT_TYPE=application/x-www-form-urlencoded"
D [02/Apr/2010:12:22:30 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 2520)
I [02/Apr/2010:12:22:30 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=2520)
D [02/Apr/2010:12:22:30 +0200] cupsdSendCommand: 16 file=14
D [02/Apr/2010:12:22:30 +0200] [CGI] admin.cgi started...
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 12 from localhost (Domain)
D [02/Apr/2010:12:22:30 +0200] [CGI] http=0xb8f4a5d8
D [02/Apr/2010:12:22:30 +0200] [CGI] op="add-printer"...
D [02/Apr/2010:12:22:30 +0200] [CGI] do_am_printer: DEVICE_URI="(null)"
D [02/Apr/2010:12:22:30 +0200] [CGI] Getting list of devices...
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
D [02/Apr/2010:12:22:30 +0200] CUPS-Get-Devices
D [02/Apr/2010:12:22:30 +0200] cupsdIsAuthorized: username=""
D [02/Apr/2010:12:22:30 +0200] Returning HTTP Nicht berechtigt for CUPS-Get-Devices (no URI) from localhost
D [02/Apr/2010:12:22:30 +0200] cupsdSendHeader: 12 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [02/Apr/2010:12:22:30 +0200] [CGI] cgi_passwd(prompt="Das Kennwort für „daemon" auf „localhost"? ") called!
D [02/Apr/2010:12:22:30 +0200] Script header: Status: 401
D [02/Apr/2010:12:22:30 +0200] cupsdSendHeader: 16 WWW-Authenticate: Basic realm="CUPS"
D [02/Apr/2010:12:22:30 +0200] Script header:
D [02/Apr/2010:12:22:30 +0200] cupsdWriteClient: 16 Closing because Keep-Alive disabled
D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 16
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 12
D [02/Apr/2010:12:22:30 +0200] cupsdSetBusyState: Not busy
D [02/Apr/2010:12:22:30 +0200] PID 2520 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 12 from localhost:631 (IPv4)
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 12 POST /admin/ HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdSetBusyState: Active clients
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: Authorized as root using Basic
D [02/Apr/2010:12:22:30 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@Godot"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.3"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[13] = "USER=root"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[17] = "CUPSD_AUTH_TYPE=Basic"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; U; Linux; de-DE) AppleWebKit/532.4 (KHTML, like Gecko) rekonq Safari/532.4"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[30] = "HTTP_REFERER=http://localhost:631/admin"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[31] = "REQUEST_METHOD=POST"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[32] = "CONTENT_LENGTH=14"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[33] = "CONTENT_TYPE=application/x-www-form-urlencoded"
D [02/Apr/2010:12:22:30 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 2521)
I [02/Apr/2010:12:22:30 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=2521)
D [02/Apr/2010:12:22:30 +0200] cupsdSendCommand: 12 file=16
D [02/Apr/2010:12:22:30 +0200] [CGI] admin.cgi started...
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
D [02/Apr/2010:12:22:30 +0200] [CGI] http=0xb81f05d8
D [02/Apr/2010:12:22:30 +0200] [CGI] op="add-printer"...
D [02/Apr/2010:12:22:30 +0200] [CGI] do_am_printer: DEVICE_URI="(null)"
D [02/Apr/2010:12:22:30 +0200] [CGI] Getting list of devices...
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [02/Apr/2010:12:22:30 +0200] CUPS-Get-Devices
D [02/Apr/2010:12:22:30 +0200] cupsdIsAuthorized: username=""
D [02/Apr/2010:12:22:30 +0200] Returning HTTP Nicht berechtigt for CUPS-Get-Devices (no URI) from localhost
D [02/Apr/2010:12:22:30 +0200] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 14
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 17 from localhost (Domain)
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 14
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 17 POST / HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: Authorized as root using Local
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 17 1.1 CUPS-Get-Devices 1
D [02/Apr/2010:12:22:30 +0200] CUPS-Get-Devices
D [02/Apr/2010:12:22:30 +0200] cupsdIsAuthorized: username="root"
D [02/Apr/2010:12:22:30 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [02/Apr/2010:12:22:30 +0200] [CGI] argv[1] = "1"
D [02/Apr/2010:12:22:30 +0200] [CGI] argv[2] = "0"
D [02/Apr/2010:12:22:30 +0200] [CGI] argv[3] = "30"
D [02/Apr/2010:12:22:30 +0200] [CGI] argv[4] = "2"
D [02/Apr/2010:12:22:30 +0200] [CGI] argv[5] = "requested-attributes=all"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@Godot"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.3"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[13] = "USER=root"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[17] = "CUPSD_AUTH_TYPE=Local"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[23] = "REMOTE_ADDR="
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.3"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[31] = "CONTENT_LENGTH=88"
D [02/Apr/2010:12:22:30 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [02/Apr/2010:12:22:30 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 2522)
I [02/Apr/2010:12:22:30 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=2522)
D [02/Apr/2010:12:22:30 +0200] cupsdSendCommand: 17 file=14
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 2523)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 2524)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 2525)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/smb (PID 2526)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 2527)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 2528)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/scsi (PID 2529)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 2530)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 2531)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 2532)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 2533)
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 2534)
D [02/Apr/2010:12:22:30 +0200] [CGI] list_devices
D [02/Apr/2010:12:22:30 +0200] [CGI] usb_find_busses=3
D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "http"...
D [02/Apr/2010:12:22:30 +0200] Script header: Content-Type: application/ipp
D [02/Apr/2010:12:22:30 +0200] Script header:
D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "scsi"...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2529 (scsi) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "lpd"...
D [02/Apr/2010:12:22:30 +0200] Script header: MIME-Version: 1.0
D [02/Apr/2010:12:22:30 +0200] Script header: Content-Type: multipart/x-mixed-replace; boundary="CUPS-MULTIPART"
D [02/Apr/2010:12:22:30 +0200] Script header:
D [02/Apr/2010:12:22:30 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:30 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "ipp"...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2525 (ipp) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2530 (mdns) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2531 (http) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "socket"...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2532 (lpd) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2533 (socket) exited with no errors.
E [02/Apr/2010:12:22:30 +0200] [CGI] Unable to create avahi client: Resource temporarily unavailable
E [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2534 (dnssd) stopped with status 1!
D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "smb"...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2526 (smb) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2524 (serial) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
E [02/Apr/2010:12:22:30 +0200] Bad request line "" from localhost!
D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 13
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "parallel:/dev/lp0"...
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 13 GET /images/right.gif HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2528 (parallel) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 18 from localhost:631 (IPv4)
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 18 GET /cups.css HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 19 from localhost:631 (IPv4)
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 19 GET /images/left.gif HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
E [02/Apr/2010:12:22:30 +0200] Bad request line "" from localhost!
D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 13
E [02/Apr/2010:12:22:30 +0200] Bad request line "" from localhost!
D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 19
D [02/Apr/2010:12:22:30 +0200] [CGI] usb_find_devices=7
D [02/Apr/2010:12:22:30 +0200] [CGI] Failed to set configuration 1 for 043d:0121
D [02/Apr/2010:12:22:30 +0200] [CGI] Failed to claim interface 1 for 043d:0121: Operation not permitted
D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2523 (usb) exited with no errors.
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 13 GET /images/sel.gif HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 19 from localhost:631 (IPv4)
D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 19 GET /images/unsel.gif HTTP/1.1
D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
D [02/Apr/2010:12:22:32 +0200] [cups-deviced] PID 2527 (snmp) exited with no errors.
D [02/Apr/2010:12:22:32 +0200] PID 2522 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [02/Apr/2010:12:22:32 +0200] [CGI] Got device list!
D [02/Apr/2010:12:22:32 +0200] cupsdReadClient: 17 WAITING Closing on EOF
D [02/Apr/2010:12:22:32 +0200] cupsdCloseClient: 17
D [02/Apr/2010:12:22:32 +0200] PID 2521 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [02/Apr/2010:12:22:32 +0200] cupsdWriteClient: 12 Closing because Keep-Alive disabled
D [02/Apr/2010:12:22:32 +0200] cupsdCloseClient: 12
D [02/Apr/2010:12:22:32 +0200] cupsdSetBusyState: Not busy
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
This is the point where I'm at a loss. Any ideas anybody?
Regards,
Rufus D
Last edited by RufusD (2010-04-06 18:56:15)@AndyRTR: Are you serious? *Half an hour*? Anyway, I tried it, but to no avail. The log goes like
tail -f cups/error_log
D [04/Apr/2010:20:26:59 +0200] [CGI] Regular expression "[a-z]+://"
D [04/Apr/2010:20:26:59 +0200] [CGI] Regular expression "[a-z]+://"
D [04/Apr/2010:20:26:59 +0200] [CGI] Regular expression "[a-z]+://"
D [04/Apr/2010:20:26:59 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [04/Apr/2010:20:26:59 +0200] cupsdCloseClient: 16
D [04/Apr/2010:20:26:59 +0200] [CGI] Regular expression "[a-z]+://"
D [04/Apr/2010:20:26:59 +0200] PID 5696 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [04/Apr/2010:20:26:59 +0200] cupsdWriteClient: 15 Closing because Keep-Alive disabled
D [04/Apr/2010:20:26:59 +0200] cupsdCloseClient: 15
D [04/Apr/2010:20:26:59 +0200] cupsdSetBusyState: Not busy
D [04/Apr/2010:20:27:28 +0200] cupsdReadClient: 20 WAITING Closing on EOF
D [04/Apr/2010:20:27:28 +0200] cupsdCloseClient: 20
D [04/Apr/2010:20:27:57 +0200] cupsdAcceptClient: 12 from localhost (Domain)
D [04/Apr/2010:20:27:57 +0200] Report: clients=1
D [04/Apr/2010:20:27:57 +0200] Report: jobs=0
D [04/Apr/2010:20:27:57 +0200] Report: jobs-active=0
D [04/Apr/2010:20:27:57 +0200] Report: printers=0
D [04/Apr/2010:20:27:57 +0200] Report: printers-implicit=0
D [04/Apr/2010:20:27:57 +0200] Report: stringpool-string-count=124
D [04/Apr/2010:20:27:57 +0200] Report: stringpool-alloc-bytes=3904
D [04/Apr/2010:20:27:57 +0200] Report: stringpool-total-bytes=2960
D [04/Apr/2010:20:27:57 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [04/Apr/2010:20:27:57 +0200] cupsdSetBusyState: Active clients
D [04/Apr/2010:20:27:57 +0200] cupsdAuthorize: No authentication data provided.
D [04/Apr/2010:20:27:57 +0200] cupsdReadClient: 12 1.1 Get-Notifications 1
D [04/Apr/2010:20:27:57 +0200] Get-Notifications /
D [04/Apr/2010:20:27:57 +0200] cupsdIsAuthorized: requesting-user-name="rufusd"
D [04/Apr/2010:20:27:57 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [04/Apr/2010:20:27:57 +0200] cupsdSetBusyState: Not busy
D [04/Apr/2010:20:27:57 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [04/Apr/2010:20:27:57 +0200] cupsdCloseClient: 12
D [04/Apr/2010:20:28:57 +0200] cupsdAcceptClient: 12 from localhost (Domain)
D [04/Apr/2010:20:28:57 +0200] Report: clients=1
D [04/Apr/2010:20:28:57 +0200] Report: jobs=0
D [04/Apr/2010:20:28:57 +0200] Report: jobs-active=0
D [04/Apr/2010:20:28:57 +0200] Report: printers=0
D [04/Apr/2010:20:28:57 +0200] Report: printers-implicit=0
D [04/Apr/2010:20:28:57 +0200] Report: stringpool-string-count=124
D [04/Apr/2010:20:28:57 +0200] Report: stringpool-alloc-bytes=3904
D [04/Apr/2010:20:28:57 +0200] Report: stringpool-total-bytes=2960
D [04/Apr/2010:20:28:57 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [04/Apr/2010:20:28:57 +0200] cupsdSetBusyState: Active clients
D [04/Apr/2010:20:28:57 +0200] cupsdAuthorize: No authentication data provided.
D [04/Apr/2010:20:28:57 +0200] cupsdReadClient: 12 1.1 Get-Notifications 1
D [04/Apr/2010:20:28:57 +0200] Get-Notifications /
D [04/Apr/2010:20:28:57 +0200] cupsdIsAuthorized: requesting-user-name="rufusd"
D [04/Apr/2010:20:28:57 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [04/Apr/2010:20:28:57 +0200] cupsdSetBusyState: Not busy
D [04/Apr/2010:20:28:57 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [04/Apr/2010:20:28:57 +0200] cupsdCloseClient: 12
D [04/Apr/2010:20:29:57 +0200] cupsdAcceptClient: 12 from localhost (Domain)
D [04/Apr/2010:20:29:57 +0200] Report: clients=1
D [04/Apr/2010:20:29:57 +0200] Report: jobs=0
D [04/Apr/2010:20:29:57 +0200] Report: jobs-active=0
D [04/Apr/2010:20:29:57 +0200] Report: printers=0
D [04/Apr/2010:20:29:57 +0200] Report: printers-implicit=0
D [04/Apr/2010:20:29:57 +0200] Report: stringpool-string-count=124
D [04/Apr/2010:20:29:57 +0200] Report: stringpool-alloc-bytes=3904
D [04/Apr/2010:20:29:57 +0200] Report: stringpool-total-bytes=2960
D [04/Apr/2010:20:29:57 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [04/Apr/2010:20:29:57 +0200] cupsdSetBusyState: Active clients
D [04/Apr/2010:20:29:57 +0200] cupsdAuthorize: No authentication data provided.
D [04/Apr/2010:20:29:57 +0200] cupsdReadClient: 12 1.1 Get-Notifications 1
D [04/Apr/2010:20:29:57 +0200] Get-Notifications /
D [04/Apr/2010:20:29:57 +0200] cupsdIsAuthorized: requesting-user-name="rufusd"
D [04/Apr/2010:20:29:57 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [04/Apr/2010:20:29:57 +0200] cupsdSetBusyState: Not busy
D [04/Apr/2010:20:29:57 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [04/Apr/2010:20:29:57 +0200] cupsdCloseClient: 12
repeating the last 19 lines every minute. I don't get why it is "requesting-user-name=rufusd", when I log in to localhost:631/admin as root with root's password. Regarding the device you spoke about: when I allow usblp to be loaded, /dev/usblp1 gets created. I assume this is what you are talking about. It's a link to /dev/usb/lp1, the latter of which features permissions of crw-rw---- root:lp. My user is not a member of group lp, I just realize... Is there any advise as to which groups are useful for a single-user desktop PC? Until now, my user is only member of network and <username> -
[solved]Network fails to start sometimes
Hello!
I'm having a problem with my network. Sometimes it fails to start. Usually, a reboot solves this. Here is the error log:
[root@claudia log]# cat errors.log
Aug 6 03:16:28 claudia dhcpcd[3194]: dhcpStart: interface eth0 is not Ethernet or 802.2 Token Ring
rc.conf:
# NETWORKING
HOSTNAME="claudia"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
hosts:
[root@claudia log]# cat /etc/hosts
# /etc/hosts: static lookup table for host names
#<ip> <hostname> <hostname>
127.0.0.1 localhost.localdomain localhost claudia
# End of file
What should I do to solve this?
Thanks and regards,
GustavoI'd say it's because since the ethernet over firewire module is loaded too, it's counted as a network device too - and which one gets to be eth0 depends if the NIC or ethernet over firewire module is loaded first. There are many solutions to this:
1) If you don't need ethernet over firewire, keep it from being loaded by putting the module name (eth1394 I think) in MOD_BLACKLIST in /etc/rc.conf, like this:
MOD_BLACKLIST=(eth1394)
2) You can make both eth0 and eth1 (and perhaps other NICs too) start up together (I do this with my 2 NICs). To do that, make the rc.conf network section something like this:
lo="lo 127.0.0.1"
eth0="dhcp"
eth1="dhcp"
INTERFACES=(lo eth0 eth1)
Then you should put a @ in front of "network" ( @network ) in the DAEMONS array unless you like waiting for a NIC that won't start -
[Solved] Makepkg fails on all Mercurial (*-hg) packages
Hello,
I'm not sure if this is a result of recent updates, but I noticed that makepkg now fails on all mercurial packages. I attempted to install both the dillo browser and pytyle, and received the following messages (this is for pytyle2-hg, but the messages were basically identical):
==> Determining latest hg revision...
warning: pytyle.googlecode.com certificate with fingerprint e9:f0:26:b1:ff:27:28:33:81:8e:51:7b:fd:a7:de:df:4c:1e:ee:14 not verified (check hostfingerprints or web.cacerts config setting)
real URL is https://pytyle.googlecode.com/hg/
requesting all changes
adding changesets
adding manifests
adding file changes
added 39 changesets with 303 changes to 115 files
updating to branch default
36 files updated, 0 files merged, 0 files removed, 0 files unresolved
-> Version found: 38
==> Making package: pytyle2-hg 38-1 (Tue Feb 7 22:02:49 EST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
==> Connecting to Mercurial server...
warning: pytyle.googlecode.com certificate with fingerprint e9:f0:26:b1:ff:27:28:33:81:8e:51:7b:fd:a7:de:df:4c:1e:ee:14 not verified (check hostfingerprints or web.cacerts config setting)
real URL is https://pytyle.googlecode.com/hg/
pulling from https://pytyle.googlecode.com/hg//pytyle
searching for changes
no changes found
==> ERROR: A failure occurred in build().
Aborting...
Rerunning makepkg in the same directory fails to get through the version check phase:
==> Determining latest hg revision...
warning: pytyle.googlecode.com certificate with fingerprint e9:f0:26:b1:ff:27:28:33:81:8e:51:7b:fd:a7:de:df:4c:1e:ee:14 not verified (check hostfingerprints or web.cacerts config setting)
real URL is https://pytyle.googlecode.com/hg/
pulling from https://pytyle.googlecode.com/hg//pytyle
searching for changes
no changes found
==> ERROR: An unknown error has occurred. Exiting...
The mercurial portion of both packages seems to match the VCS template exactly. Executing "hg clone [hgroot] [hgrepo]" works, as does performing a pull from the cloned directory.
Any help would be greatly appreciated.
Regards,
szim90
Last edited by szim90 (2012-02-08 10:00:50)That does appear to be the cause of this problem. Thanks karol - marking as solved.
Last edited by szim90 (2012-02-08 10:00:34) -
[Solved] VirtualBox Failed to open a session
Hi everyone,
I've installed virtualbox, qt and virtualbox-additions
I've also added the following to /etc/rc.conf
MODULES=(vboxdrv vboxguest vboxsf vboxvideo)
I've also added my username to vboxusers
When I start a session in virtualbox i get the following error message-------------
Failed to open a session for the virtual machine "Linux VM" ---- Linux VM is the name of the Virtual Machine
VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED).
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb}
Any ideas why the VT-x features would be locked or unavailable?
I've tried 3 different iso images but every time I get the same error.
Thanks in Advance I'm certain I must have missed a step at https://wiki.archlinux.org/index.php/VirtualBox
However I've rebuilt several times and started from scratch at least 3 times. each time I get the message above
Last edited by joe4ska (2011-10-20 03:43:09)DSpider solved my problem. I had Enabled VT-x/AMD-V which caused the conflict.
Once I unchecked the box everything worked perfectly.
http://dl.dropbox.com/u/28308548/hardwa … zation.png
hcjl, I'm probably using it as a Guest. I actually don't know the difference between Host and Guest. I'm very new to virtualbox
Thanks for the help guys.
Last edited by joe4ska (2011-10-20 03:44:19) -
[SOLVED]Get [FAIL] when loading user specified modules.
That is it, when the system is booting i get a [FAIL] message when loading user specified modules after upgrading udev, and the kmod new module handling or something as say in the news. I dont have a modprobe.conf or a modprobe.conf.pacsave file either and creating a modprobe.conf file doesn't solve the problem. The strange thing is that the modules are loaded anyways. I mean the ones that are specified in rc.conf. I dont know if the system [FAIL] to load that modules or others...The system works fine for now too.
Thanks.
PD: sorry if you notice my poor english.
Last edited by Hyugga (2012-01-22 23:09:02)I had the same problem and removing the governor performance from rc.conf solved the problem. I tried however to remove both governors and only leave powernow-k8 (this is the only one that works for me) leaving rc.conf like this:
MODULES=(brcmsmac powernow-k8)
When I boot the laptop and check which governors are available and being used I get the following:
[netlak@soulrebel ~]$ cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: powernow-k8
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 8.0 us.
hardware limits: 800 MHz - 2.10 GHz
available frequency steps: 2.10 GHz, 1.50 GHz, 800 MHz
available cpufreq governors: performance
current policy: frequency should be within 800 MHz and 2.10 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 2.10 GHz.
This like as if the ondemand governor would not be available but when unplugging the laptop and check again I get this:
[netlak@soulrebel ~]$ cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: powernow-k8
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 8.0 us.
hardware limits: 800 MHz - 2.10 GHz
available frequency steps: 2.10 GHz, 1.50 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 2.10 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
This shows that the ondemand module can be autoloaded when needed, so I leave rc.conf only with powernow-k8.
Thanks for your help. -
[Solved] Netctl fails after update
Netctl fails on all wireless connections, with existing profiles or not.
The output of systemctl status netctl@wlp18s0\x2dKALAPPURACKAL.service is
[email protected] - Networking for netctl profile wlp18s0x2dKALAPPURACKAL
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: inactive (dead)
Docs: man:netctl.profile(5)
got this error after after an update yesterday, or may be i removed network manager along with the update(might be blunder)
output of systemctl status | grep net
sys-devices-pci0000:00-0000:00:1c.1-0000:12:00.0-net-wlp18s0.device loaded active plugged Centrino Advanced-N 6200 2x2 AGN
sys-devices-pci0000:00-0000:00:1c.5-0000:16:00.0-net-enp22s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
sys-devices-pci0000:00-0000:00:1d.0-usb2-2\x2d1-2\x2d1.3-2\x2d1.3:1.0-net-usb0.device loaded active plugged Android
sys-subsystem-net-devices-enp0s29u1u3.device loaded active plugged Android
sys-subsystem-net-devices-enp22s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
sys-subsystem-net-devices-wlp18s0.device loaded active plugged Centrino Advanced-N 6200 2x2 AGN
netctl@wlp18s0\x2dKALAPPURACKAL.service loaded failed failed Networking for netctl profile wlp18s0-KALAPPURACKAL
netctl@wlp18s0\x2dproject1.service loaded failed failed Automatically generated profile by wifi-menu
system-netctl.slice loaded active active system-netctl.slice
network.target loaded active active Network
the profile i am trying out now is
Description='Automatically generated profile by wifi-menu'
Interface=wlp18s0
Connection=wireless
Security=none
ESSID='KALAPPURACKAL'
IP=dhcp
Last edited by nu11_p01n73R (2014-03-03 04:15:31)Try downgrading wpa_supplicant. Sounds like a similar problem to this:
https://bbs.archlinux.org/viewtopic.php?id=177875
See my entry at the end.
Cheers,
Steve.
Maybe you are looking for
-
Yoga 2 Pro/i7/8GB/512SSD Dragon Assistant and other (software) issues
Hi all, I've been playing with my new Yoga 2 for a week now. I like how light, fast and quiet the machine is. I do however feel the machine is kind of buggy and wanted to see if anyone else was having similar issues. Windows 8.1 makes me feel like an
-
SAP PI7.31 : Mail with multiple attachments - how to process via UDF
Hi wondering how I can approach this problem. I have to read an Email with any number of attachments - it can have between 1 and 4 or maybe more of different types (CSV,XLS,PDF,ZIP). I need to read this email and extract the attachments to a fold
-
Not a computer person but I'm wanting to get photoshop for my Chromebook and need to know what to buy?
-
Photoshop Album Starter Edition doesn't link to Elements 3.0
I own both Adobe Photoshop Album Starter Edition and Photoshop Elements 3.0 and they run fine independently. At various times while in album starter, when I choose "Go to Standard Edit Photoshop Elements" to edit a photo, it will offer me to purchase
-
Accounts Receivable - Instalments
Hi Guys, I wanted to know if there are any reports which would tell me if a customer has defaulted on their payments (for example they owe £1200 the customer paid the first 3 payments of £10.00 but then never made any payments after this!!). I need t