Officejet 7310 Installation Issue(s) with Windows 7 Pro 64 Bit OS

Recently purchased Windows 7 Pro 64 bit OS platform laptop.  Downloaded latest driver for All-In-One and executed.  Followed USB connection directions, Windows Driver installation indicated all drivers installed completely, but the last step (configuration) failed (after running about five minutes).  
Device Manager indicates "Officejet 7300 (DOT4PRINT)" under "IEEE 128.4 compatible printer" normal; also indicates "Officejet 7300 series (DOT4USB)" under "USB controllers" normal... One can print without any problem.... Other than the failure message at the end of the installation, the "HP Solution Center" won't launch....error message includes: "HP Solution Center cannot run because your device installation is not complete."
I have completely uninstalled and reinstalled to no avail.... I would appreciate some help.   thanks.... Jim

Hi JRParker,
This document on A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows will assist in narrowing the cause of the installation interruption.
I will need to know if you see a four-digit error code, or if the message contains a ".msi" or ".dll"
file association.
Please take a screenshot of this error message by:
1.) Clicking on the Print Scrn
2.) Open Microsoft Paint
3.) Click on File, then Paste. The screenshot should appear on the canvas.
4.) Click File, then Save as. You will have an opportunity to save the document to the desktop with a unique name.
5.) Click Save.
I am looking forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • How do i know if my itunes is compatible with windows 64 bit?

    How do i know if my itunes is compatible with windows 64 bit?

    Did you download the 64-bit installer?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Officejet 7310 & F4580, scan fine, use MacBook Pro.Save as solid gray with banding.

    I used HP Deskjet F4580 and it scanned fine, the image looked fine. When I saved the image (pdf, jpeg, png) they all come out as a gray color with banding. I tried another printer/scanner, HP Officejet 7310 and the exact same problem.  I just purchased a new MacBook Pro, I can't remember if I had this problem recently on my last MacBook. Any suggestions would be greatly appreciated! Julie

    Hi,
    Be sure to use Image Capture or Preview, the HP Scan appliction is not compatible with Maericks and may cause issues while saving the scan:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c04028214
    Please let me kno if that may help,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Very disapointed in Lenovo's service on my T430 machine type 2342CTO with Windows Pro 7 64 bit

    I have been a ThinkPad user since the first model 700.  I have always liked them and when I have had to use other laptops I found them inferior.  However one thing my team has been telling me in the past year or two is that they do not want to purchase anymore Lenovo ThinkPad's.  They have told me that the service and support has been greatly degraded.  I was hesitant to agree with them until my present experience.  We purchase all of our ThinkPad's with a 4 year on-site warranty.  We have people who are in the field and when their computer goes down we need to get it back up and running ASAP.  
    Three weeks ago my hard drive started to give me some problems and  one day after shutting down the computer a message came up that it needed to run Checkdisk which it did.  I was able to keep it going and I did have a backup.   I contacted  the 800 number to talk with a service person and they ordered up service for the replacement of the hard drive and also to replace the fan and sent me the system disks for the T430.  Two days later the insight service person showed up with the parts.  The disks showed up as well via UPS.  The service person replaced the fan and the HDD.  There were 4 DVD's for the system disks.  He started the rebuild and asked if I could finish it and I said I could with no problem.  He left.  I continued the process.  After the 3rd DVD it asked to put in the 4th and when I did a message said that this was the wrong DVD.  I tried all the other 3 with the same response.  I tried building it from scratch again and the same problem.  I called support again and the guy I spoke with thought that I must have a bad DVD and he would send out another set.  That set of 4 DVD’s arrived the next day which I was very thankful for.  He told me that they could only guaranty 2 days.  I thought OK we should be up and running shortly.  The same problem occurred again.  Bear in mind that both sets of these DVD's were all labeled for the ThinkPad T430 machine type 2342 which was my laptop and for Windows Pro 7, 64 bit.  I called Lenovo and this time the tech I spoke with said that there was another set of Disks for my machine that should have been sent.  Of course I was frustrated but there was not a lot I could do about that and I asked if they could make sure that they were overnighted to me so that I would be sure to get them on the next day which was Thursday.  He told me that he could not do that, that they could only guaranty 2 day. I called the next morning to get the tracking number which they gave me and it was supposed to be delivered on Friday which I was very thankful for.  That was Good Friday.  However UPS had some severe weather at their hub in Kentucky and everything was delayed and the disks did not show up until Monday.  I had now been down a whole week from my first call the Monday before. 
    The new set of disks was 3 DVD’s labeled for the T430, Machine type 2342 and Windows Pro 7, 64 bit.  I started the build process.  It continued to work but I made a mistake in the order of disks so I thought that these disks have a problem too.  I called Lenovo and they said that I should just send the system in for depot repair.  I said that will take at least until probably Thursday.  The guy I was speaking to said that I should have it back by Wednesday.  I asked if there was any way that I could send it to them directly that day.  He said no I could not, I had to wait for a box.  I asked if there was anyway to expedite the process and he spoke to his manager and his manager said that the level of service that was on the machine would not allow for any faster service.  The also told me that my service contract would allow me to take it to an authorized Lenovo service center around me.  I said to him that they probably have a queue as well and that I will have to wait for that.  As an aside note we did try service like this with one of our other ThinkPad’s that had a problem and the place messed up the system and we ended up at the end of the day having to send it to their depot for repair.  I hung up and though let me try these disks one more time.  I did and I saw my mistake and the system loaded up the DVD’s properly.  I was getting excited that I could be up and running shortly.  However my excitement was short lived.  Once it started to reboot and expand the installation the drive failed and said that it had to run Checkdisk.  It did and once again there were all kinds of orphaned files etc.  I had to reboot and run it from the DVD’s again and I went through the whole process once again.  The system went into a complete failure and would not do anything.  I called back support with my case # and gave them this information.  The box came the next day and I packed it up and sent it off.  I then started tracking it and it arrived on Wednesday as expected.  Then I wanted to go to the site and track the progress of the repair.  The document you have to fill out and send back with the system gives information on where to go on the web to track the process.  My shows that it arrived on Wednesday 4/8 as expected.  The first message shows “Machine being repaired” at 08:52.  Then I checked later in the early evening hoping to see shipped back to customer.  However what I did see was the following message “Hold for Parts – Service call is on hold until parts arrive”.  Then I kept tracking it and saw another entry on 4/10 at 02:01:54 which was the same “Hold for Parts – Service call is on hold until parts arrive”.  That was of course Friday.  I called the service and they told me that they were waiting on parts which they could not tell me what parts and that there was nothing that they could do.  I then asked if there was anyway to expadite this and the girl I spoke to said that she would seek to accelerate this to another level and that I would get a call from Lenovo in the next 2 to 3 business days!  I said to her that you really mean that that is accelerating it and she said yes.  Yesterday I received a call from an automated attendant, not a real person who told me that they were waiting on parts for my computer and that it could be “5 to 7 business days before they receive the part”.  I could not believe this.  I called again today 4/15 and asked if anyone could tell me the status because the website told me very little.  I told the girl that I was speaking to that I had received this automated attendant telling me that a part would take 5 to 7 business days more.  I asked her if Lenovo kept parts and she said yes but that this part was not in stock.  I asked her what the part was and she was able to find that it was the main system board that had to be replaced.  I said you have already had the unit for 1 week now at depot repair and never mind the fact that I have been without my computer for 2.5 weeks.  She told me that there was nothing she could do and that I had to wait on the part.  That is where this case sits at present.
    I am very very unimpressed with Lenovo’s service.  And furthermore there is no one to talk to about it at Lenovo who gives a care.  I really did not know where to air my grievances with how this case is being handled.  I thought maybe the forum would be a place.  At least others will learn of my dilemma and maybe others have experienced the same thing.
    I still like my ThinkPad but the service of Lenovo has become very poor at best.  The guy that is my technical manager has had a poor experience of late ordering up some other Lenovo products and he does not want to purchase anymore and these were for new product.  They sent the laptop with the wrong software loaded and then said no problem we will send you a new set of disks to load.  He refused and said you have to fix this because it was Lenovo’s mistake.  It takes time to load software and time is money.  I believe we will be leaving the Lenovo field if things continue.  I hope and trust that others will not experience the same treatment as I/we have.  I wonder if Lenovo will even respond to this post.

    I had a real problem with wireless performance on multiple ThinkPads with Win7 until I realized there is a new (or maybe changed implementation) power setting in Win7 which was affecting it.
    If you go into Control Panel -> Power Options and click "Change plan settings" for your current power plan.
    On the next screen click on "Change advanced power settings"
    On the next screen expand "Wireless Adapter Settings" and then "Power Saving Mode"
    Make sure it is set to Maximum Performance.
    Not sure if this will help your particular problem but hope it does.

  • Cannot Complete Installation of Vista with Mac Pro and Boot Camp

    I only have one hard drive with my Mac Pro, and I partitioned the drive into two sections with boot camp and restarted with my Vista 64 bit Ultimate CD.
    I have tried formatting the partition with Vista and it still gives me the dreaded error message of "windows is unable to find a system volume that meets its criteria". I've tried deleting the partition during installation, and making a new partition with Vista, reformatting, then restarting the computer. Same message.
    I don't know what to do. I've tried like mad searching for topics like this one here, but every one of them deals with installing vista on a second dedicated hard drive on the Mac Pro. I only have one. How do I get this to work?
    Please help if you can. I would REALLY appreciate it. I'll be watching the thread. Thank you!!

    Loyalty4Life wrote:
    Thank you for your reply! I'll be here all night.
    I have the 3GHz Dual-Core Intel Xeon processors. I tried installing Vista ultimate with my 32 bit software, but I still get the same message (I own both legally, btw).
    Thanks for your help.
    Several things to do:
    Run OS-X Disk utility and repair the disk if necessary, and file permissions.
    Be sure your HD has the GUID partition scheme and if it has SMART that it's OK
    Zap the PRAM
    Be sure you are logged in as administrator when creating the BC partition and starting the installation of Windows from Leopard
    When I installed Vista Ultimate 64-bit, I was using BootCamp beta, 1.2 or 1.3. I created the partition with BootCamp Assistant.app as you did. It's a 60GB partition that I formatted with NTFS with BC.
    After starting the install in Tiger, I then simply inserted the Vista 64-bit DVD and that was it.
    It just installed.
    Ditto with XP-Pro on my other MBP. Zero problems with BC. It was also done with a beta, BC1.0.
    I have never installed Windows using Leopard. When I updated to Leopard from Tiger nothing changed, but there seem to be more problems with Leopard and BC2.0 than there were with Tiger and the beta versions.
    There are no requirements about legality until after the OS is installed, so that's a moot point.
    There are some install DVDs that are in ISO format and they won't work, but it seems that yours is working but not finding a suitable volume.
    You might try reformatting the BC partition with BootCamp assistant as FAt32 and seeing if that works, but you are limited to 32GB if you do that, but it would be a good test. Vista should then format it into NTFS.
    Be sure that your Leopard OS is fully backed up because stuff happens when you keep fooling around with partitions.
    Also look through this forum for similar problems.

  • Adobe Flashplayer installer not working with Windows 8.1 and Firefox

    I am running Windows 8.1 and attempted to download Flashplayer for Firefox.  I have it working in IE, but it will not launch for Firefox.  Any ideas on what might be blocking the Flashplayer installer from running in Windows 8.1?

    Hi sfmedic,
    Have you tried to download another installer to have a check ?
    Here are several links may be helpful to troubleshoot this issue:
    Flash Plugin - Keep it up to date and troubleshoot problems
    https://support.mozilla.org/en-US/kb/keep-flash-up-to-date-and-troubleshoot-problems
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
     Flash Player Help / Installation problems | Flash Player | Windows
    http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    Considering it can be installed in the Internet Explorer ,this issue is related to the Fire Fox. It is recommended to look for help from the Fire Fox forum.
    Best regards

  • Keyboard layout issue only with Windows 7, not Windows 8

    Hello,
    I have a strange behaviour with Remote Desktop on Windows 7. I have a RDS 2012R2 deployment, with TS Gateways, broker and remote desktop collection. I have published a RemoteApp.
    My issue is with the keyboard layout send by the client. My server is in English - Swiss French keyboard.
    With my Windows 8 client, keyboard in "French", the keyboard used in my RemoteApp is correctly set to "French"
    With my Windows 7 client, keyboard in "French", the keyboard used in my RemoteApp is set to "Swiss - French". This is not the correct layout.
    Why under Windows 7 the keyboard layout is not send correctly ? 

    Hi Sebastien,
    Initially please use latest RDP version 8.1 for windows 7 and check the result. 
    If you want the session to use the default keyboard layout stored in the user profile instead of the layout provided by the Remote desktop Server client after the user logs on to the Remote desktop Server computer, you can set the IgnoreRemoteKeyboardLayout
    registry value to 1. After users first connect to the Remote desktop Server computer, configure the default keyboard layout and input language that you want, and then log off. All later user logons will use the default keyboard layout and input language from
    the profile.
    To do so, please perform the following steps: 
    1. On the remote desktop server, click Start, click Run, type regedit, and then click OK.
    2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout
    3. On the Edit menu, click Add Value, and then add the following registry information:
     Value name: IgnoreRemoteKeyboardLayout
    Data type: REG_DWORD
    Value data: 1
    4. Quit Registry Editor.
    After you first connect to the Remote desktop Server computer, configure the default keyboard layout and input language that you want, and then log off. All later user logons will use the default keyboard layout and input language from the profile.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Installed CS3 with windows vista bit AE won't open.

    When my old faithful computer motherboard fried, I had to get a new computer with Windows Vista Home Premium.
    I had CS3 loaded and working without a glich on my old XP computer.
    I've loaded the whole CS3 suite, but when I open After Effects nothing happens. Using Window's Task Manager, under "Applications" After Effects doesn't show up as a running but under "Processes" the file "AfterFX.exe *32" is listed as running.
    I've also tried uninstalling CS3 and reinstalling it in the directory "Program Files" rather than in the directory "Program Files (x86)" and nothing changed.
    I've tried to opening all the other programs in CS3 with the similar results. Nothing opens, but their .exe files are listed under Task Managers "Processes".
    I'm using this as a vol lic product, so I'm not sure how much tech support I can get.
    Thank you for any help you can give me.

    I'm sorry it didn't work. I probably don't have an answer for you since I'm not an expert or anything.
    One thing I thought was weird was that the software version on my computer for the motherboard was version 6.xx (whatever) and the software I downloaded from the HP web was version 5.xx (whatever). It made it work though..
    I think the update would be on the HP site, not the MSI site. Go to hp.com, downloads, and put in the name of your computer. Download/install whatever motherboard software they have. If that doesn't work, go to the adobe website and search for the document kb402213 and work through that. It's what the person you give Adobe $40 to help you is going to do.
    Good luck. Hopefully this helps.

  • Adobe Flash Player 10.1 issues, errors with Quickbooks Pro 2010 installation

    I recently - uh today - had an agonizing experience installing Quickbooks Pro 2010 because I kept receiving error messages during the Quickbooks installation. It was a new cd that I had purchased a few months ago from Costco, and had been putting off using it, or even installing it.
    So today, I tried to install it, and failed repeatedly. I kept getting the same message, Adobe Flash player file is unavailable - with a drop down screen showing the location of the flash player file that the installation software was trying to find so it could continue the installation. I think I recall seeing an error message originally with Adobe Flash Player 10.1, but it's been a long day, so maybe the error was always referring to Flash Player 8.0.  I tried to browse for a new location that the Flash Player file might be located, looking through the Program Files\Adobe and coming up with nothing.
    I spent a long time looking through the discussion forums on both Quickbooks and Adobe trying to find the answer, also turning off and on my computer,  ha. And I installed the latest Flash version, Flash Player 10.1, then uninstalled it and then reinstalled it, and then uninstalled it and looked for the obsolete Flash Player 8.0 which I couldn’t find on Adobe’s website, but found links to in two other forums…So basically, I tried to solve this on my own, and it didn't work.
    So...I was whining to a friend who suggested I just call Quickbooks technical support. Duh, why didn't I think of that? I guess because the packaging on the new software says that fees may apply if you call customer service.  Well, it doesn't apply to the first call, and also it's crazy to charge someone who can't even install the program. So I called them, and was on hold forever.
    But the problem was solved.
    The tech support person, Manish, was able to install Quickbooks by completely bypassing the usual installation procedure.  He checked for compatibility, which was fine, I have Windows XP, etc. and then I believe went to control panel, add or remove programs, and clicked on add programs, and followed the icons with the Wizard to install the latest version of Quickbooks.  The interesting thing here is that QB has some special download to allow remote access during a trouble shooting call. It initially freaked me out, but it worked just fine, since I could see what was happening on my computer screen even though I wasn't the one operating the computer.
    I asked Manish why this installation method seemed to work. He said some of the Quickbooks cds have a bad Flash Player program file, and doing it this way seems to bypass it. He also said that Quickbooks should not compatibility issues with Flash 8.0 or Flash 10.1, but there were some problems noted with Flash Player 9.0.  I asked if I would have problems if I uninstalled Flash Player 8.0 and then reinstalled 10.1. He said there shouldn’t be problems, so that’s what I just finished doing.
    Hopefully this is helpful for someone else out there in cyberland.
    Also, it was kind of helpful, someone else posted on another forum that you could check what flash files you have by going to C:\Windows\System 32\Macromed\Flash, because I couldn’t even find where the Flash Player was installed.  They are not in the Program files under Adobe.

    Hi, well that sounds like quite an ordeal. Your Flash files are located in C:\Windows\System32\Macromed\Flash  Open Flash with a right click and post back all files listed there. It may be a good idea to just confirm that they are correct.
    Then Using Internet Explorer, go to Tools, Manage addons and Toolbars & Extensions and look for a box Show all add ons.
    You should find Shockwave Flash Object..ActiveX Control..Flash10h.ocx and make sure it is enabled.
    The Flash files and that ActiveX Control is Flash Player.
    Now if you use another browser, you may want to post that version info as well. Also, what service pack do you have with XP?
    Thanks,
    eidnolb

  • Dual OS system booting issue - Solaris with Windows XP Pro

    Hi,
    I have installed Windows XP Professional with SP2 on my laptop Dell Inspiron 6400 (Intel Core 2 Duo). I created partition as below,
    C: 25GB (Primary : Active) Installed XP
    D: 15GB (Primary) - Tried to install Solaris here
    F: 10GB (Primary)
    G: 20 GB (Logical)
    H: 20 GB (Logical)
    1. I tried to install Solaris 10, booted up system from DVD and selected Solaris. I got a message related to "License..." and it stopped right there, nothing showed up on screen after the message. I forced it to shutdown.
    2. Next, I tried with Solaris Express Developer edition DVD. I was able to proceed until "Install" option. After clicking "Install" button, it reported some account name(no account name found) setting problem and quitted from installation. It asked to remove the DVD manually. But I was not able to eject it, got stuck. I switched off it and removed DVD.
    When I bootup the system next time from HDD or CD or USB bootable backup, it showed blank screen and blinking cursor. I am not able to boot system with Win XP or USB Win Xp bootable. I am able to enter BIOS setup.
    Please let me know how to boot up Win Xp and install Solaris with it.

    with my little experience i find solaris 10 isn't able to install on sata hdd but with solaris express edition 5.11 i was able to install it on my lap top toshiba tecra and now i can boot with xp sp2 and solaris i hope this answer your question .

  • L7680 driver installation wont work with Windows 8.1

    I recently bought a new HP Pavilion laptop and updated to windows 8.1 not long after the purchase.  I tried to install my Officejet Pro L7680 all in one printer today and was unsuccessful on every attempt.  The driver/software will download but when I attempt to install the software I get a message of "cannot find file specified".  I called HP and spoke to a rep who informed me that my printer was too old and wasn't compatible with the Windows 8.1 system.  He said there was no update available for my printer and basically I would have to buy a new printer.  Bad answer!!! 
    The issue is a missing file from the Preload Drivers folder: Msiexec.exe
    Please help me find a way to install my printer
    This question was solved.
    View Solution.

    Hi exumsta
    Yes the anitivirus software could be causing issues.
    I would make sure it is turned off during the installation.
    Here is a url to temporarily disable all the start up programs to see if one of them is causing any issues.
    http://theunlockr.com/2012/04/05/how-to-change-windows-8s-startup-programs/
    You will have to follow the same steps to enable all again.
    Let me know how that goes.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Installer Error Message with Adobe Pro IX

    I have tried several times to download Adobe Pro IX with no success.  Today I keep getting an error message that states the installer is misconfigured.  Tried to download new installer and just keep getting the same error message.  I checked the system requirements and I have the correct version of Windows with the correct service pack and tons of disk space and meet all the other requirements.

    [topic moved to Acrobat forum]

  • HP Officejet 6500A won't work with Windows 10

    I just upgraded to Windows 10 from Windows 7 on my HP Pavilion and now my HP Officejet 6500A printer won't work.  Do you have any updates to solve this issue?Thanks.

    I have the same issue with my OJ 6500 (network connected).  And I've been just been sent on a wild goose chase to install the support assistant - which didn't actually resolve my issue.  When I go directly to the drivers, it recognizes my OS as Windows 10, but doesn't give me a matching driver package to download... How/when will this be resolved? Does anyone have a workaround?If I knew that my printer/scanner doesn't work anymore I certainly wouldn't have upgraded to Windows 10.  Win 8.1 wasn't perfect, but at least everything worked... Thanks for any suggestions!

  • Tying to re-install my hp officejet 6310 all in one with windows 7 op system

    Fomerally had this working great.  a tech had some type of patch which allowed this device to work with my Windows operating systerm instead of XP. I didn't make a back up disk and now I can't get it to load. Anyone come across this issue?

    Hi, Please download software and driver from the following link and install on your computer:     http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6300-All-in-One-Printer-series/1120059/model/1120060#Z7_3054ICK0KGTE30AQO5O3KA30R1 Regards.

  • Itunes installation pckg error with Windows Vista

    I keep trying to install itunes onto my new computer and keep getting this message, "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package." Anybody else get irritating message? I WANT MY ITUNES! HELP!

    Are you logged on as the adminsitrator? Also you could try right clicking on the installer and choosing run as administrator.
    If that doesn't help, I wonder if this is a Visual basic script problem, see this Apple article:
    http://docs.info.apple.com/article.html?artnum=304405

Maybe you are looking for