Officejet Pro 8600 Plus not working wirelessly with MacBook Air 10.9.2

Downloaded drivers did not work - Apple cannot solve. When I tried installing the software from the disk it says it is only compatible with OS 10.7 or below. Mine is 10.9.2
I have two of the Officejt Pro 9600 Plus printers in separate locations and have the same issue with both printers.

Hi Danecrazed, maybe this link below can help you. This will direct you to download the Mac HP software for 10.9 support.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=us&dlc=en&sw_lang=&product=4323...

Similar Messages

My HP Officejet Pro 8600 can't print from my MacBook Air

Hi,
My HP Officejet Pro 8600 can't print from my MacBook Air. It keeps on showing "The printer is not connected", but the screen on the printer shows connected. I often reset the printer 'EVERY TIME" I want to use it. I also tried to turn off my laptop and printer several times before printing. If I'm lucky enough, it will work maybe for one or two prints. If no luck then I'll have to reset everything again. Sometimes I reset the printer, the printer will not show on my selection.
This question was solved.
View Solution.

Hello boojoo1tw,
Welcome to the HP Forums!
I understand you're unable to print most times with your Officejet 8600. How is this printer connected? Wireless or USB? What is your operating system on your Mac computer? Click here to find out.
If your printer is wireless, then I would recommend assigning a "Static IP Address" by following this HP document on Printer Does Not Maintain Wireless Connection.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scanning issues. I would like to help.
I would recommend powering off your printer and computer. Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in. Once it has begun broadcasting again, power on your printer and computer.
I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro 8600 Plus Not Recognized On The Network

I have a CenturyLink DSL Modem/Router that has 4 ports on the back. I use Port 1 on the DSL Modem/Router to conntect to my NetGear Router. I use Port 2 on the DSL Modem/Router to connect my HP OfficeJet Pro 8600 Plus printer. I use Port 3 on the DSL Modem/Router to connect my Brother MFC-7360N printer. I am not using Port 4 of the DSL Modem/Router.
My NetGear Router is used to connect all wired desktop PC's (5) in the house.
I was able to successfully install the software for the Brother printer on all computers and can print on the Brother printer from any of the desktop pc's.
I have the software for the HP printer installed on all computers but on the WIN XP desktop pc I cannot detect the printer on the network. During the setup process the software detects that the HP printer and the WIN XP pc are connected to two different routers (the DSL Modem/Router is being detected as a router by the WIN XP pc). On the other desktop pc's which are running either WIN7 or WIN8 there is no detection problems even though the printer is connected to the DSL Modem/Router while the PC is conntected to the NetGear Router.
Does anyone have any knowledge as to why I am having this problem. The problem seems to be only with the WIN XP pc and not with the WIN7 or WIN8 pc's.
This question was solved.
View Solution.

You are running a double NAT scenario, not good. Simple fix, put the gateway unit (modem/router) in bridge mode, which will disable the router functions and just make it a modem. Now connect the Netgear router to the gateway unit and have this handle all your wired and wireless connections.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Officejet Pro 8600 Plus not able to use full features

HP Officejet Pro 8600 Plus (Model No. N911h)
Serial No.[Personal Information Removed]
Windows 7 Professional Service Pack 1
The printer is being used on the desktop as a network printer. Windows Firewall is turned off. Office uses Trend Micro Antivirus. Able to use full features like digital fax, print, scanning only when Trend Micro Office Scan is offloaded. Printer was taking dynamic port so created Standard/TCP-IP port created. Even this did not solve the problem. Trend Micro administrators say the port is open. Not sure if anything particularly needs to be allowed by Trend Micro. Spoke with HP support system over phone. They are also not sure what is to be done rectify the problem.

Hello,
I see that you're having an issue unblocking ports for the printer.
Here is a list of the ports that needs to be unblocked. Hopefully this will help.
Incoming ports (UDP) are destination ports on the computer while outgoing ports (TCP) are destination ports on the
HP device.
• Incoming (UDP) ports: 137, 138, 161, 427
• Outgoing (TCP) ports: 137, 139, 427, 9100,
9220, 9500
The ports are used for the following functions:
Printing
• UDP ports: 427, 137, 161
• TCP port: 9100
Photo card upload
• UDP ports: 137, 138, 427
• TCP port: 139
Scanning
• UDP port: 427
• TCP ports: 9220, 9500
HP device status
UDP port: 161
Faxing
• UDP port: 427
• TCP port: 9220
HP device installation
UDP port: 427"

Officejet Pro 8600 Plus, not appending number in sequence to base file name when saving PDF.

Officejet Pro 8600 Plus (new today - everything else working great), Vista 32-bit, HP desktop.
After scanning documents and creating a PDF file (Save to file on my computer w/USB connection), using HP Scan, it does not append numbers in sequence to base file name. HP Scan (Under Advanced Settings/Destinations) reads that it will do this (when you over over the base name field). Perhaps I have to enable something. Do you know how I can do this? Thank you.

I'm not really sure what's going on. The install might not have written right. Try uninstalling and installing from a fresh download. Let me know what happens.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP OfficeJet Pro 8600 Will Not Print Wirelessly

Hi. I have read other threads on this forum with suggested fixes from HP employees and tried them. I have run the tool which found no errors. My firewall is off. I have installed the latest Adobe and uninstalled then reinstalled the printer software. I have followed instructions in book re: turning off computer, router, printer, etc. I can see the IP address for the printer in IE.
Still, this brand new printer will not print wirelessly or otherwise from my hp laptop. VERY frustrating. I have spent hours trying work arounds for a brand new computer. I would greatly appreciate a response regarding how to resolve this problem. Thank you.

I have seen cases where a troubled install went through flawlessly after the computer was reimaged. That may be an option to consider.
I did want to make sure that you had the most current firmware version and it looks like you do.
Before a reimage, you could uninstall Officejet Pro 8600 programs (if there are any) and download and install the drivers for your printer from hp.com. Click here for the HP Officejet Pro Full Feature Software and Driver. By doing this, you would have the most up-to-date drivers. Sometimes a download will work where a disk does not. It you do decide to reimage, I highly recommend the above download for the installation.
Let me know what happens.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

HP Officejet Pro 8600 n911a - not working, again

I purchased this printer (Officejet Pro 8600) last week. Set up was really difficult. A PC laptop set up quickly and works fine. My iMac and Mac Book - coulnd't 'see' the printer for set up. I managed to install drivers and achieve printing by using a USB cable to set up the wireless' connections using the IP address.
All worked for Wednesday to Friday. This monring, both Macs find the printer 'unreachable', the PC is printing fine.
I have:
Hard reset the printer
Downloaded the Apple support files, and restarted
Downloaded the most up to date drivers from the HP website
Still nothing. What next?
My Mac is using OS 10.8.5
This is costing me time and money, not withstanding the purchase price. What next ... I need a printer - or I wouldn't have paid for one.
All help gratefully received.

Good news - I've managed to add a static IP address.
So, for now at least, the iMac and Mac Book can see the printer and print. Hopefully it lasts ...
Still cannot 'scan to computer'. It works on the pc, but I cannot scan to/via the macs - which is what I need to do. And no, I cannot share a network folder on the pc (it is not mine). Is there any way around this? It used to work fine with the HP scan software on my old Deskjet F4580 ... any advice appreciated

Officejet Pro 8600 Plus not connecting

My printer has stopped connecting to my computer. When I click on the control panel on the printer for wireless connection, it tells me that the wireless connection has been disabled and I should contact the printer's administrator. I am the only user of the printer, so this is not an answer. I have spent hours trying to get this printer to connect to my MacBookPro, and it won't recognize the printer even with a cable. And the printer driver seems not to have been updated for over two years (a link to an alleged more current version leads to a dead web page). I have run the HP wireless setup software on my Mac repeatedly but it fails to connect to the printer.

Hello @JeanneS1 ,
Welcome to the HP forums.
I understand that you are haveing a problem connecting to your 8600 Plus over the wireless network.
I would like to help.
I would doubble check the wireless on the printer.
Touch the wireless icon, if it has an IP address Type it inot safari and try to reach the EWS.
If it does not have an IP, or says no link, go into the setup menu.
Then go into the Network sub menu and select the wireless setup wizard.
If the printer has an IP address and you can't reach the Embedded Web Server (EWS), I would power off the printer.
Then unplug the power to your router of one minute. Plug the power back into the router and turn the printer back on.
When the blue wireless light on the printer stops blinking try to connect the printer again.
If the newtork connection is fine, I would uninstall the HP software again.
Then I would verify and repair the disk permissions.
Once that is done, check for Apple updates.
Restart/reboot the Mac.
Install the HP software again.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Officejet Pro 8600 scanner not working!

We have just got a new Officejt Pro 8600 printer in the office and I do a lot of scanning, however, it doesn't always work! I would say it works perhaps 2 times out of 10? It comes up with an error message of 'Scanner lid or Document Feeder open', despite a few pages going through, or me previously successfully managing to scan. Help - it's driving me crazy!!!

The two metal clips under the document feeder are not holding it down far enough. If you lift the adf you can see them underneath one on the front one on the back. Putting a bit of left pressure (towards the left side of the machine) on both clips bends them slightly this will hold the adf cover down tighter and the machine will now see it as closed.
I have fixed over 30 machines doing this.

Officejet Pro 8600 plus 'seeing' duplicate wireless networks - and refusing to connect

Greetings,
I am running a wireless network that uses a couple of Airport Expresses to extend it.
My other HP Printer (Officejet 8500) has no problem connecting to the same network.
I am running MacOS 8.2 and have downloaded/installed
Officejet-Pro-8600_v12.23.0
The Error Message = "Duplicate WiFi Networks Names...Plese check your wireless router settings. Click Change Networks to select a different network."
Folks - I have only one network.
The software is not smart enough to just choose the strongest signal and connect to it !
Thanks for any suggestions...
---alan
Very disappointed

Good thinking !
---alan

Is Windows Server 2012 compatible with HP Officejet pro 8600 plus printers

Hello,
I am wondering whether HP officejet pro 8600 plus printers compatible with Windows server 2012 - I have the driver installed on the server and deployed - installation of the driver and all was successful but it won't print from the server or on a user's computer from the deployed printers list. No error message comes up, I just click print and nothing happens. If I install it individually on the user computers - it seems to print as a 'network printer' but won't print from the server, and if it can not print from the server then it can not print from the deployed printers list. I was looking up on driver compatibility list online earlier and could not find Windows Server 2012 mentioned on the list - only server 2008 and below.
Essentially what I am trying to find out is whether this officejet pro 8600 plus printer is compatible with our server.
Many thanks,
Michael Peters

Hello Michael, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial issue. You can do this at the HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro 8600 Plus no longer printing wirelessly

My HP Officejet Pro 8600 Plus has printed wireless for both my MacBook Pro and iPad for over a year. As of this morning, it no longer will. The Wireless Network Test Results notice says "your hp printer is unable to connect to your wireless router. MAC address filtering may be enabled on your wireless router which can prevent your HP printer from connecting to your wireless network during setup. Solution: if MAC address filtering is enabled and you would like to keep it enabled, you must add the MAC address of your printer (available in this Test Report) to the list of permitted devices for your wireless router before continuing"
My "router" is an Apple Time Capsule. All this is "greek" to me. I have been trying to resolve this for 5 hours now and have made no headway as I really do not know what I'm doing. Do you have any tips (step by step) as to how to get this working again?
Thanks so much!

Well searching the web I find the support page for your printer here.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=4323648
Getting started, drivers, manuals are all here the get it connected.
Let’s try here. Wireless Printing Help
http://www.hp.com/global/us/en/wireless/index.html?jumpid=ex_r11400_go_wirelessprinting
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Officejet Pro 8600 Plus cannot print after OS 10.10 SW update

My Officejet Pro 8600 Plus was working just fine with OS 10.9. I got an email from HP that there was updated software for OS 10.10, so I dowloaded & installed it, and now I get gibberish when I try to print anything -- a web page, email, Word document -- similar results for all.
For example, for a Fitbit update email, the title "Weekly Stats" was printed, my name was printed, some images were partially printed, and all the remaining lines/descriptions were gibberish. Maybe 20% of the characters were printed, the rest was blank space. Looked more like Morse code than text.
I reinstalled 3 times with the same results. I installed the update via the app store, same results. I used Time Machine to reset to yesterday, no impact, same results. I can scan just fine. Have not tested faxing.
My HP Laserjet Pro M401dne was also updated and it still prints fine.
Can I get and reinstall the OS 10.9 SW?
Thanks in advancxe for any assistance.
Kent

Hi,
Please check the following link first:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04473034&tmp_task=prodinfoCategory&cc=us&dlc=en...
and the following link shows how to install new patch:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04469325&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Officejet Pro 8600 plus Printer

I have just purchased the Officejet Pro 8600 plus Printer & installed it with no problems but it won't connect to the internet/web services? It is connected to my home network & will print etc. but when I try to activate the internet as directed, it searches for a while with 'Enabling Web Services (ePrint & Apps)' on the screen & then reads 'Web Services (ePrint & Apps) could not be enabled'.
When I tried to activate the web service during instalation, the page read that if it did not activate I would be directed to a page to download necessary drivers but this never happened & the only thing I could do was to select the 'Next' button which completed the installion without the internet/web service working.
Does anyone know of this issue & if so, can you please tell me how to connect my printer to the internet.
This question was solved.
View Solution.

That is great to hear Roses66. If you could mark my previous post with the 'Accept As Solution" it will help others in this community to find our conversation easier.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Officejet Pro 8600 Plus not working wirelessly with MacBook Air 10.9.2

Similar Messages

Maybe you are looking for