OID - Help Reqd(Integration Server/Change Logs)

Not sure of the terms. I have been approached to
troubleshoot the following scenario.
Using OID. Intergration server is used besides 3rd
party tools from Sun , IBM. The change logs need to
be picked up by the 3rd party tools. How do i do it.
TIA

Hi Stephan,
I think this is not the correct approach because development and productive systems are different. You must register your technical systems by means of RZ70 transactions. If you have two different landscapes (DEV, PROD) you must register on two SLD servers.
Doc about SLD: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557

Similar Messages

Help with Web Server error log entries.

I'm having trouble turning off logging of messages from the iAS plugin to
the Web Server error log. It seems to be logging "Info" class messages to
the logs.
For example:
[24/Oct/2001:11:38:57] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/index.jsp
[24/Oct/2001:11:39:02] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/PageController
[24/Oct/2001:11:39:02] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/PageController
[24/Oct/2001:15:40:21] info ( 792): gxrequest.cpp:gxrequest() reports: End
req /NASApp/fortune/fortune
Tech support just says "uh try this this this..." and hasn't been able to
stop the logging. They won't even confirm it's a problem (logging info
messages to error logs...).
Has anyone else seen this or been able to stop it?
Thanks,

These entries normally do not get shown. Make sure you turn off
debugmode.
run kregedit and make sure iPlanet\Application Server\6.0\CCS0\HTTPAPI
is set to 0
Rodger Ball wrote:
>
I'm having trouble turning off logging of messages from the iAS plugin to
the Web Server error log. It seems to be logging "Info" class messages to
the logs.
For example:
[24/Oct/2001:11:38:57] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/index.jsp
[24/Oct/2001:11:39:02] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/PageController
[24/Oct/2001:11:39:02] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/PageController
[24/Oct/2001:15:40:21] info ( 792): gxrequest.cpp:gxrequest() reports: End
req /NASApp/fortune/fortune
Tech support just says "uh try this this this..." and hasn't been able to
stop the logging. They won't even confirm it's a problem (logging info
messages to error logs...).
Has anyone else seen this or been able to stop it?
Thanks,--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (SUNPS)
iPlanet e-commerce Solutions
Sun Microsystems Australia Pty Ltd

Help! SQL server database log file increasing enormously

I have 5 SSIS jobs running in sql server job agent and some of them are pulling transactional data into our database over the interval of 4 hours frequently. The problem is log file of our database is growing rapidly which means in a day, it eats up 160GB of
disk space. Since our requirement dont need In-point recovery, so I set the recovery model to SIMPLE, eventhough I set it to SIMPLE, the log
data consumes more than 160GB in a day. Because of disk full, the scheduled jobs getting failed often.Temporarily I am doing DETACH approach
to cleanup the log.
FYI: All the SSIS packages in the job is using Transaction on
some tasks. for eg. Sequence Cointainer
I want a permanent solution to keep log file in a particular memory limit and as I said earlier I dont want my log data for future In-Point recovery, so no need to take log backup at all.
And one more problem is that in our database,the transactional table has 10 million records in it and some master tables have over 1000 records on them but our mdf file
size is about 50 GB now.I dont believe that this 10 million records should make it to 50GB memory consumption.Whats the problem here?
Help me on these issues. Thanks in advance.

And one more problem is that in our database,the transactional table has 10 million records in it and some master tables have over 1000 records on them but our mdf file
size is about 50 GB now.I dont believe that this 10 million records should make it to 50GB memory consumption.Whats the problem here?
Help me on these issues.
For SSIS part of question it would be better if you ask in SSIS forum although noting is going to change about logging behavior. You can increase some space on log file and also should batch your transactions as already suggested
Regarding memory question about SQL Server, once it utilizes memory is not going to release unless there is windows OS faces memory pressure and SQLOS asks SQL Server to trim down its memory consumption. So again if you have set max server memory to some
where near 50 SQL Server will utilize that much memory eventually. So what you are seeing is totally normal. Remember its costtly task for SQL Server to release and take memory so it avoids it by caching as much as possible plus it caches more so as to avoid
physical reads which are costly
When log file is getting full what does below transaction return
select log_reuse_wait_desc from sys.databases where name='db_name'
Can you manually introduce chekpoint in ETL query. Try this it might help you
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Help with change log subscriber rights

Can someone help me give my change log subscriber object rights to see changelogs?
I am using OID 10.1.2.1.0 on RH Linux. I followed the directions for creating my change log subscriber in the OIM Integration guide under "Synchronization with Third-Party Metadirectory Solutions". I used the Oracle Ldap command-line tools from a windows box.
The cn=orcladmin user can see the changelog entries, but my subscriber object account get's "insufficient_rights" when it tries to see cn=changelog, although it seems to be able to browse the rest of the directory tree fine.
Here's a listing of my subscriber object:
C:\D\ldaptools_oracle>ldapsearch -h lynx -p 389 -s sub -D cn=orcladmin -w xxxxx -b "cn=Oracle Internet Directory" "(&(objectclass=*)(cn=miis_change_subscriber))"
cn=miis_change_subscriber,cn=Subscriber Profile,cn=ChangeLog Subscriber,cn=Oracle Internet Directory
orcllastappliedchangenumber=2600
orclsubscriberdisable=0
objectclass=orclChangeSubscriber
objectclass=top
cn=miis_change_subscriber
userpassword={SHA}8wNdwBiIGL4+QyKn06u...
authpassword;oid={SASL/MD5}ah1tJyQf8lp...
authpassword;oid={SASL/MD5-DN}Lt3/8l2R...
authpassword;oid={SASL/MD5-U}1XmqsqH9...
Here's my query for trying to see changelogs.
ldapsearch -h lynx -p 389 -D "cn=miis_change_subscriber,cn=Subscriber Profile,cn=ChangeLog Subscriber,cn=Oracle Internet Directory" -w xxxx -b "cn=changelog" -s one "(&(changenumber>=2600))" targetDN
ldap_search: Insufficient access
But the same query substituting the superuser gives me a list:
ldapsearch -h lynx -p 389 -D "cn=orcladmin" -w xxxxx -b "cn=changelog" -s one "(&(changenumber>=2600))" targetDN
Changenumber=2612, cn=changelog
targetdn=cn=instance1,cn=odisrv,cn=subregistrysubentry
Changenumber=2613, cn=changelog
targetdn=cn=instance1,cn=odisrv,cn=subregistrysubentry
Changenumber=2614, cn=changelog
targetdn=cn=instance1,cn=odisrv,cn=subregistrysubentry
etc...
Is there a particular group he should belong to?
Thanks!

Here I am answering my own question, after 10 days without a single response. Thanks, Oracle!
Through oidadmin (Internet Directory Manager) I added my change log subscriber account to the group: cn=odisgroup,cn=DIPadmins,cn=Directory Integration Platform,cn=Products,cn=OracleContext.
Don't know if this is the correct process or not, but this group has rights to see the changelogs. Now I can see 'em.
Thanks again!

Change the pipeline to the Integration Server - Link or Steps needed -URGNT

Hi,
        Can someone please let me know the set of steps or blog link to configure the
   " Maintain the pipeline to the Integration Server:
   Change the pipeline to the Integration Server by running transaction SXMB_ADM "
   which is to be done as part of the post installation steps for PI usage type in a Heterogeneous system migration.
Thanks
   Sourav

Sourav,
Go to SXMB_ADM --> Configuration --> Double click on Integration engine configuration --> Then in the corresponding integration server you should see this url. If you dont see then click on specific configuration --> Choose category as Runtime --> In parameters put IS_URL then in current value put the url.
Check this help for more information on this:
http://help.sap.com/saphelp_nw04/helpdata/en/89/b5553bf3a76258e10000000a114084/content.htm
Regards,
---Satish

Getting Error while creating Integration server Connection ...PLS help me

Hi everybody,
While creating the Integration server connection I am getting the below error.
Please help me to solve it.
I am using 10.1.3.1 .
Application Server: OK
BPEL Process Manager Server: FAILED
ESB Server: FAILED
Thanks in advance.
Ramana

Now i can able to login to my weblogic admin console and find that listen address is blank i have given the listen address as localhost now i can able to create the application server connection successfully ...Listen address blank means your server will accept connections on all network addresses i.e. on localhost, on 127.0.0.1 and on IP/Host name of machine
If you want to access this server from a remote machine as well, then better keep the listen address field as blank OR assign the value of hostname/IP of machine as listen address. In case you set listen address as hostname/IP of machine, server will not listen anymore to localhost or 127.0.0.1
1)Now iam working in local machine so that i am giving localhost .... In case i doing some bpel work in my local machine and after completing the work if want to move to my server ...do i want to change the connectionand give my server hostname ha?If your BPEL server is a remote server then better create a new connection for that (using listen address and port of that server)
How to see errors in Admin server log C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\servers\AdminServer\logs ...is it i want to check it here?Yes, you need to check the logs in this directory in file AdminServer.log
How to check this?Under $Domain_Home/bin (C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\bin), there will be a file setSOADomainEnv.cmd. If you open this file using notepad, you would see a setting like below -
set DEFAULT_MEM_ARGS=-Xms512m -Xmx768mThis setting defines the heap memory.
Regards,
Anuj

How to change the ROLE: Integration server in business system in SLD

Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
Rehan

Hi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan

Change the Releated Integration Server for all Business Systems

Hello,
follow Scenario:
We export the SLD entries from a Development System in a file.
Now we want to import the Entries in our Prod.-System, and we
have to assign (or change) to other Related Integration Server.
e.g. the esported Business System has in Development the
Related Integration Server D12, but in the Productive System we
need P12.
Is there a other possibility as to change first things first.
Thanks for your help.

Hi Stephan,
I think this is not the correct approach because development and productive systems are different. You must register your technical systems by means of RZ70 transactions. If you have two different landscapes (DEV, PROD) you must register on two SLD servers.
Doc about SLD: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557

Monitoring status of OID Integration Server

Does anyone know anything about the best practices of monitoring the status of OID integration server. I'm writing a small plugin for Nagios and I was hoping to be able to pull a single attribute out of LDAP that tells me the status of Integration server. We have it running against iPlanet, and we need to make sure it's always in sync (and when it's not, notification is sent.)
Is this what the attribute orclodipinstancestatus does? Anyone have any info on the possible values of this (I presume 1 means everything is OK, although this may be the wrong attribute.)
I could just look at the odi/log/AGENTNAME.trc file, but if OID Manager can see the status (sync success or failure) I'm pretty sure it's some value in ldap... somewhere...

I'll answer my own question... I believe this should do the trick.
Using ldapsearch:
ldapsearch -h localhost -D "<SOME ADMIN USER>" -w <PASSWORD> -b "orclodipagentname=<AGENT NAME>, cn=subscriber profile,cn=changelog subscriber,cn=oracle internet directory" -s sub "objectclass=*"
A nice text attribute:
orclodipsynchronizationstatus=Synchronization Successful
reveals the status.

AP log got Connection lost to WLCCP server, changing to Stand-Alone Mod

Our customer has about 200 Autonomous APs(Version=c1200-k9w7-tar.123-2.JA2),WLSM(Maintenance img(1.1(2)),Application img=12.2(15)XR2), Sup720 IOS=s72033-jk9o3sv-mz.122-18.SXD3.bin.The static WDS point to WLSM,somme of AP will fail with log"Connection lost to WLCCP server, changing to Stand-Alone Mode".
Any ideas about solutions on this?

You will receive this error message if the AP loses its connectivity with the WDS. This can happen if the radios are flapping, as well as if there are problems with authentication / registration with WDS. If the AP is powered using POE, please ensure that you configure the proper poe support on them. Also check if authentication is happening correctly. Debugs on the AP and the logs on the AAA server will help troubleshoot this issue.

Help! Batch Capture Changes My Logged Clips' Media Start & Media End

I'd be very grateful for any help on this.
I log a tape with about 40 clips ranging from 30 seconds to 4 minutes. I select the clips and start a batch capture. Everything appears to be capturing normally and I receive no error messages or dropped frame warnings - after my last clip is captured I get a "Successfully Captured" message.
However, as soon as I click "Finished," all of my clip media start's, media end's, and durations in the log window arbitrarily change to weird times. All my media start points are 26 frames too early (I've tripple-checked that "Add Handles" is indeed deactivated), and the media end points make no sense at all.
A clip that was once 44 seconds long is now only 12 seconds long, the media end point moved a whopping 34:03 too early. Another clip will become 2 seconds longer, the media start point still shifted back 26 frames, but with the media end now 31 frames too late. Checking the original files on my drive confirms that only these weird, unusable segments are what has been captured.
What complicates things is that I just discovered today that if I capture locally to my internal hard disk, the clips capture normally (the times remain unchanged). But if I set my capture scratch to my external hard drive (a LaCie F800 2-TB RAID-5 using Firewire-800), that's when the clips start changing themselves. I ran disk utility and found no errors on the drive, and have never had a problem with it or any part of my configuration until the last month or so... the only changes to my system being the regular use of Software Update.
On top of that, my colleague is experiencing a similar problem with batch capture changing his clip times, even though he is using a different computer (single-processor G5), a different video deck (Sony DHR-1000), and a different storage medium (Apple Xserve RAID).
So my question is: What is happening! The only thing I can think of is that perhaps some update has a bug - but I can't find anyone with a similar problem online.
Any help on this would be extremely appreciated! Thank you in advance for your advice.
Dual 2.3GHz PowerPC G5 Mac OS X (10.4.4) Deck: JVC CU-VH1 / Storage: LaCie F800 2-TB RAID-5
Dual 2.3GHz PowerPC G5 Mac OS X (10.4.4)

Here's an update on this. Both my colleague and I have confirmed that if we capture to an internal or external drive that is not a RAID FCPro batch captures just fine.
But, if the drive we are capturing to is a RAID (in my case a LaCie Biggest F800 and his case an Apple Xserve), then we get dropped frame reports and/or clip in's and out's changing after the batch capture is complete.
We even tried reformatting one of the xServe's and rebuilding it as non-journaled, it didn't solve the problem.
It seems impossible that we're the only ones to be experiencing this problem... does anybody have any help or suggestions!?

How to change connection port between INTEGRATION SERVER and Adapter Engine

Hi,
I have scenario that in the productions server we are using SAP web dispatcher to connect to Adapter Engine for example the port is 60000.
So when we copy this server to DR environment the webdispatcher is not there. is that any way to change the all connection port between IS and Adapter from 60000 back to original port 50000 ?
Please advise ?
Thank You and Regards
Fernand

HI,
The waiting status is because of Message Queue is in wiating status. This may be because of overload of the messages, or may be your receiver systems is not ready etc.
SO go to SMQ2 and check the status of the queues.
Also have a look into this blog-
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
<i>
Why I can see this messages only in the integration server?</i>
>>>If message reachs the Adapter engine, you can see in the Adapter monitor. In your case, message is still there in the Integration Engine. Once the queues are cleared it will reach the Adapter engine, so you can monitor it in the adapter engine
Regards,
Moorthy

Help!! I changed my log in screen to show a blank name and pw. Now I cannot open the computer???

Help!! I changed my log in screen to show a blank name and pw. Now I cannot open the computer???

1.Turn on the computer and when you hear the startup chime hold CMD+S. This boots the computer into single-user mode, giving you root access.
2.Once single-user mode loads (it looks like a black screen with white text) mount the hard drive. So at the prompt type in:
/sbin/mount -uw /
3. Now that the drive is mounted we can edit the file system. We need to delete a file that tells your computer that you have completed setup. So type in:
rm /var/db/.applesetupdone
4.We need the system to reboot so it can check for the file and not find it. Type in:
reboot
5.Continue setup
Be sure to select “DO NOT TRANSFER MY DATA”.
6.Finish setup and login.
7. Go to system preferences and edit that account so it HAS A NAME.

Change log.properties without restarting server

Hi ,
Am using OIM9102 with App server WebSphere6.1
How can I handle changing log level in xellerate/config/log.properties file with out restarting server.
Thanks

I don't think this is possible.

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

OID - Help Reqd(Integration Server/Change Logs)

Similar Messages

Maybe you are looking for