OIM Task Failure

Hi All,
I am seeing username against a failure of a task that is assigned to a Group "System Administrator". When I see the "Task Assignment History", I see two rows for it. These are as follows:
Row 1:
Task Status: Rejected
Task Action: User
Assign Type: Group
Assigned To User: Angelo Saiano [10026374]
Assigned To Group: SYSTEM ADMINISTRATORS
Assigned By: 10026374
Assigned Date: April 18, 2012
Row 2:
Task Status: Pending
Task Action: Engine
Assign Type: Group
Assigned To User:
Assigned To Group: SYSTEM ADMINISTRATORS
Assigned By:
Assigned Date: April 18, 2012
As per me, it should have gone to Engine. Why it is going to the user? Am I missing some setting in OIM that is causing this error? This is for OIM 9102 BP11.
This task pertains to change AD password. It is sporadic in nature as it works for most of the users and fails for some. Once a system admin reset the password of user, it starts working for that user.
Please advise.
Edited by: devinderc on Apr 18, 2012 9:21 AM

Hi
your JDK version is not supported.
You need to use JDK1.6.0_10 and later.
Please correct this and
Other reason could be your environment variables. Ensure that you follow installation guide.
Regards
Shashidhar

Similar Messages

Error while runnig OIM task purging script OIM_TasksArch.sh

Error while runnig OIM task purging script OIM_TasksArch.sh
## Enter date in YYYYMMDD format
(All the task data for users which have been disabled/deleted on or before the entered date would be archived) :
## All the task data for users which have been disabled/deleted on or before TODAY's date would be archived,
Do you want to continue [y,Y,n,N]? :
y
Calculating the number of records that would be archived,
this may take some time, please wait...
ERROR ==> An error has occurred during the process
Please check logs created at /export/home/oracle/Purging_Task/Err_Arch_tasks_2012_11_05_16_51_22.log and try again
./OIM_TasksArch.sh: test: argument expected
bash-3.00$ cat /export/home/oracle/Purging_Task/Err_Arch_tasks_2012_11_05_16_51_22.log
-- Task Archival Execution Status
Task Data Archival Summary
ORA-00942: table or view does not exist

In this link you resolved this issue by giving all privileges to DEV_OIM...
Re: Getting error while running OIM in built purging script OIM_ReconArch.sh
Now if again this ORA-00942: table or view does not exist is coming, possibility is that there is no issue regarding privileges as you already have given all privileges to DEV_OIM...
Anyway try again giving full permissions to it just in case for some reasons permissions might have reset...
Now the only option is to study OIM_TasksArch.sh and figure out which tables or view it wants to refer to and is not available to it..
*./OIM_TasksArch.sh: test: argument expected*
The above line means that this sh file needs some arguments... Please study a bit more to figure out those arguments.. It will work...
*23.2.1 Understanding the Task Archival Utility*
http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/archival_utilities.htm#OMADM3033
Following Parameters i.e. Arguments are needed
# File : OIM_TasksArch.sh
# Purpose : To archive data from active task tables to archival task
# tables and to delete data from active task tables.
# Arguments : 1 --> Location of the Oracle Home(ORACLE_HOME)
# 2 --> Oracle Identity Manager Database Name
# 3 --> Oracle Identity Manager Database User Name
# 4 --> Password for the Oracle Identity Manager Database User

OIM task Scheduler

Hi guys,
I have few doubts regarding OIM task scheduler:
1) I have defined a class to run using task schedler everyday. I like to set the status of task scheduler to COMPLETED or FAILED after each run. How can I achieve this?
2) Or I should not catch any exceptions in my code. So that it marks the task scheduler status as FAILED?
I have gone through below link about status of task scheduler but can't make out anything:
http://download.oracle.com/docs/cd/B31081_01/idmgr/b25940/oimadm.htm#CIADIAEJ

Hi,
I think that the BaseScheduledTask sets that status itself when it finishes its run. I've used "getStatusString" to set the task status during the reconciliation process.
By the way, if the Scheduled status is not NONE or INACTIVE when it finishes the job, I think OIM won't let you start again the Scheduled task (someone correct me if I'm wrong, plz, at least it happens when it Stucks on "Running").
In my case, "NONE" is the status that I get when the scheduled failed, and "INACTIVE" when succeed. So maybe you should try to throw the exception and see what happens.
Regards,

DAC task failure: SIL_PositionDimensionHierarchy_AsIsUpdate_Full

Hi,
The Incremental DAC load failed yesterday night for two workflows:
SIL_PositionDimensionHierarchy_AsIsUpdate
SIL_PositionDimensionHierarchy_AsIsUpdate_Full
The workflows belong to the Out-Of-Box Container SIL_Vert.
The workflows populate zero records on other regular days, but this is for the first time it resulted in an error during DAC load.
The DAC log doesn't show any detectable error message with the root cause information. But since there were many dependent tasks running on top of it, they all got stopped and henceforth resulting in the DAC failure.
###########################DAC LOG######################################
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.1 HotFix10], build [412.0123], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Fri Jan 28 02:15:04 2011
Connected to Integration Service: [Integration_Service_SAMPGHSBL112].
Integration Service status: [Running]
Integration Service startup time: [Sat Dec 04 18:52:14 2010]
Integration Service current time: [Fri Jan 28 02:15:04 2011]
Folder: [SIL_Vert]
Workflow: [SIL_PositionDimensionHierarchy_Type1Update] version [1].
Workflow run status: [Terminated unexpectedly]
Workflow run error code: [0]
Workflow run id [46743].
Start time: [Fri Jan 28 02:14:43 2011]
End time: [Fri Jan 28 02:14:48 2011]
Workflow log file: [G:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SIL_PositionDimensionHierarchy_Type1Update.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Integration_Service_SAMPGHSBL112]
Disconnecting from Integration Service
Completed at Fri Jan 28 02:15:04 2011
=====================================
ERROR OUTPUT
=====================================
Error Message : Unable to get Informatica workflow return code. Check Informatica workflow/session logs.
ErrorCode : -1
Re-Queue to attempt to run again or attach to running workflow
if Execution Plan is still running or re-submit Execution Plan to execute the workflow.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:179)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:585)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
12972 SEVERE Fri Jan 28 02:15:05 EST 2011
ANOMALY INFO::: Error while executing task Informatica Session Batch
MESSAGE:::Submitted task failed during execution
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
com.siebel.analytics.etl.etltask.ParallelTaskBatch.submitIncompleteTasks(ParallelTaskBatch.java:251)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:360)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:326)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
12973 SEVERE Fri Jan 28 02:15:05 EST 2011
ANOMALY INFO::: Error while executing : com.siebel.analytics.etl.etltask.ParallelTaskBatch:Informatica Session Batch
MESSAGE:::com.siebel.analytics.etl.etltask.FailedTaskException: Submitted task failed during execution
EXCEPTION CLASS::: java.lang.RuntimeException
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:469)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:326)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::Submitted task failed during execution
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
com.siebel.analytics.etl.etltask.ParallelTaskBatch.submitIncompleteTasks(ParallelTaskBatch.java:251)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:360)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:326)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
12974 SEVERE Fri Jan 28 02:15:05 EST 2011
ANOMALY INFO::: Error while executing task All Task Batches
MESSAGE:::Execution of child batch Informatica Session Batch failed.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
#######################END OF DAC LOG#################################
After the first fail of the DAC load due, I marked the task as completed and restarted the Execution Plan again; the load failed again due to the second workflow mentioned above. I repeated the same steps and this time, it ran till the end to complete the load process.
The Informatica Log file for the particular workflow shows:
Message: Use override value [DATAWAREHOUSE.DATAWAREHOUSE.SIL_Vert.SIL_PositionDimensionHierarchy_AsIsUpdate.log] for session parameter:[$PMSessionLogFile].
Please suggest us if we can bypass the above mentioned tasks and we can exclude the same from our current Execution Profiles. If the dependencies on these tasks create issues, how do we modulate the same for successful DAC loads going forward. Also please specify the significance of these particular workflows.
Thanks-
Ramaswamy Pappula
Ph: 412-320-6796

Hi gs,
This is database dependent command
depending on conncetion type @DAC_SOURCE_DBTYPE
which DAC reads when you define Source database type in Physical datasources,
By default it will invoke the informatica workflkow SIL_PositionDimensionHierarchy_AsIsUpdate_ORCL
however if your
source is DB2 it will invoke workflow: SIL_PositionDimensionHierarchy_AsIsUpdate_DB2
source is mSSQL it will invoke workflow: SIL_PositionDimensionHierarchy_AsIsUpdate_MSSQL
source is Teradata it will invoke workflow: SIL_PositionDimensionHierarchy_AsIsUpdate_TD
Let me know if this helps.
Thanks,
Ani

FU Ant task failure: java.util.concurrent.ExecutionException: could not close client/server socket

We sometimes see this failure intermitently when using the FlexUnit Ant task to run tests in a CI environment. The Ant task throws this exception:
java.util.concurrent.ExecutionException: could not close client/server socket
I have seen this for a while now, and still see it with the latest 4.1 RC versions.
Here is the console output seen along with the above exception:
FlexUnit player target: flash
Validating task attributes ...
Generating default values ...
Using default working dir [C:\DJTE\commons.formatter_swc\d3flxcmn32\extracted\Source\Flex]
Using the following settings for the test run:
FLEX_HOME: [C:\dev\vert-d3flxcmn32\302100.41.0.20110323122739_d3flxcmn32]
haltonfailure: [false]
headless: [false]
display: [99]
localTrusted: [true]
player: [flash]
port: [1024]
swf: [C:\DJTE\commons.formatter_swc\d3flxcmn32\extracted\build\commons.formatter.tests.unit.sw f]
timeout: [1800000ms]
toDir: [C:\DJTE\commons.formatter_swc\d3flxcmn32\reports\xml]
Setting up server process ...
Entry [C:\DJTE\commons.formatter_swc\d3flxcmn32\extracted\build] already available in local trust file at [C:\Users\user\AppData\Roaming\Macromedia\Flash Player\#Security\FlashPlayerTrust\flexUnit.cfg].
Executing 'rundll32' with arguments:
'url.dll,FileProtocolHandler'
'C:\DJTE\commons.formatter_swc\d3flxcmn32\extracted\build\commons.formatter.tests.unit.swf '
The ' characters around the executable and arguments are
not part of the command.
Starting server ...
Opening server socket on port [1024].
Waiting for client connection ...
Client connected.
Setting inbound buffer size to [262144] bytes.
Receiving data ...
Sending acknowledgement to player to start sending test data ...
Stopping server ...
End of test data reached, sending acknowledgement to player ...
When the problem occurs, it is not always during the running of any particular test (that I am aware of). Recent runs where this failure was seen had the following number of tests executed (note: the total number that should be run is 45677): 18021, 18, 229.
Here is a "good" run when the problem does not occur:
Setting inbound buffer size to [262144] bytes.
Receiving data ...
Sending acknowledgement to player to start sending test data ...
Stopping server ...
End of test data reached, sending acknowledgement to player ...
Closing client connection ...
Closing server on port [1024] ...
Analyzing reports ...
Suite: com.formatters.help.TestGeographicSiteUrls
Tests run: 5, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.008 sec
Suite: com.formatters.functionalUnitTest.testCases.TestNumericUDF
Tests run: 13, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.071 sec
Results :
Tests run: 45,677, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 201.186 sec
Has anyone else ran across this problem?
Thanks,
Trevor

I am not sure if this information will help everyone, but here goes...
For us, these problems with FlexUnit tests crashing the Flash Player appear to be related to couple of factors. Recently, we moved up from Flex 3.2 to Flex 4.1 as our development baseline. Many people complained that their development environment (Flash Builder, etc.) was much more unstable. Apparently, 4.1 produces SWFs that require more memory to run than 3.2 does? Anyway, we still had Flash Player 10.1 as our runtime baseline. Apparently, that version of the player was not as capable of running larger FlexUnit test SWFs, and would crash (as I posted months earlier). I upgraded to the latest 10.3 standalone player versions, and the crashes have now ceased. It would be nice to know exactly what was causing the crashes, but memory management (or lack of) is my best guess.
So, if you are seeing these issues, try upgrading to the latest Flash Player version.
Regards,
Trevor

OIM - Task Assignment Adapter - How to get the object instance key?

Hello experts,
I'm trying to use a task assignment adapter to assign an approval task dynamically. Basically, the user can request a resource like "CustomApp Profiles" and we create an object form to let them choose the profile that he needs. Each profile has an owner, which is populate in a Lookup (Owner is the code and Profile is the decode).
So, in the approval task, I need to get the profile selected by user in the object form and search into the lookup who is the owner of that profile. But I don't know how can I get the object instance key using the parameters that can be mapped to a task assignment adapter.
Looking into the OIM documents, I believe that the easier way is using the request key, because the REQ_KEY is a foreign key in OBI table.
Did anyone knows how can I get the object instance key using the request key? Can I use some API or should I execute a SQL statement directly in OIM database?
Best Regards,
Nitto

To retry a task that is in a rejected state, you use the SCH_KEY which is the task key. In OIM, all rejected tasks are listed in the OTI table. It contains all the important information about a rejected or pending task.
You can use the APIs found in the tcProvisioningOperationsIntf class to retrieve open tasks.
-Kevin

Bizarre Task failure

I have a function module that performs a call transaction to create a transfer order. I have two tasks that call this function module; one tasks method calls the function and passes a flag to inform the transaction to be processed in foreground, the other tasks method calls the same function, but passes a flag to inform the transaction is to be processed in background mode.
The first task tries to create the transfer order in background; if it cannot create a transfer order, an exception is raised, and in the workflow the exception path then invokes the other task to create the order in the foreground.
In the test environment, this works as desired.
In the production environment, the background task **always** fails; However:
1) Processing the foreground transaction from the inbox always succeeds (I have 50 instances of this so far without failure)
2) If I use the Business Object Builder, and invoke the method used to create the object in background mode that the task uses, it works with no errors.
So in summary:
Test environment - no problem.
Production environment - background task always fails.
Production environment - foreground task always succeeds with no errors; uses same Function module but calls transaction in foreground mode.
Production environment - Can call the method in Business Object Builder test tool and it works fine.
This is also happening with another two tasks that I wrote with a different function module to do a similar transfer order creation.
Anybody shine some light on this madness?
- Tony.

Hi Mike,
WF-BATCH is exactly the same in Test and Production, APART from the email address was missing in production; I have just maintained that and now they are identical.
There is a task before these steps that provides the workflow container with material numbers, but this is to guide the workflow, and reads from a database entry that definitely exists at time of read (there is at least a day between the creation of the sales order where it reads this from and the creation of the transfer orders).
One other difference; both of the failing tasks are in two separate parallel paths of a fork (one for each material of up to two in the order). Can't see how that could affect things, but then again I can't see what's going wrong here anyway.
I have functionality in all of my tasks to write the transaction messages back to the IDoc that started the workflow off; I'm going to activate that when I get back to work, and see if that shows anything.
Cheers,
Tony.

OIM - 'Task Effect' in Process Definition - Task Properties

Hi all,
I am trying to understand the drop-down selection 'Task Effect' on the General tab of Process Definition - Task Properties.
On page 7-18 of the Design Console docs it says:
"When the disable action is chosen, all tasks associated with the disable action are inserted."
Can someone elaborate on this? If I have four tasks, each with a Task Effect of 'disable', will they all fire if one of them does?
Any hints, or documentation references, would be greatly appreciated. I am using OIM 9.0.3, btw.
thanks,
Kam

Once the process tasks has been executed you can not delete it.
check these links for more info.
Deleting a Process Task
Re: Remove Unused Process Tasks from Process Definition for Export

SSIS Database Transfer Task failure

Hi,
The Database Trasnfer Task has failed with the following error......
failed with the following error: "Invalid object name 'dbo.exampleViewName.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Does anybody know what this means?
Thanks,
Ben
Mr Shaw... One day I might know a thing or two about SQL Server!

That means that it cant find the object in the database. Has the table being dropped since the creation of the package?
Please check if table is still present in db and is under correct schema
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page
No the table has no been dropped.
I am running the task with the source database online.
Mr Shaw... One day I might know a thing or two about SQL Server!

OIM Import Failure

Hi,
I have a process form with a field having length 100.
Now i modify this field length to 50.
I try to import this onto another environment and my import throws error saying cannot reduce field length.
But the problem is after this failure, i am not able to see the earlier version of the form with field length 100 in my design console.
Thanks in Advance.

I try to import this onto another environment and my import throws error saying cannot reduce field length.It seems that Form was already there in your database and you tried to import in the same Database. Export/Import Utility doesn't support changing Field Length.
Go back to stable state of OIM by Database backup if you have.
If you don't have Stable state's DB Backup then Check the database and see does your form resides there ? If you are not able to see your Form in Design Console then it may be due to some permission issues. Check FUG table for permission related to your form.

OIM task Assignment Tab

I am trying to understand how the assignment tab works. In process Def, I have a task, like create user. That has a assignment tab which has one entry in it. It has escalation time and a Default Rule. I entered an escalation time of 10 mins and then proceeded to create another entry below that. However, it says it needs a rule and the Default rule is not applicable since its already used by the first entry.
What rule do I need to create? What should be in that rule? Thanks in advance.

See
http://download.oracle.com/docs/cd/E14049_01/doc.9101/e14061/resmgt.htm#BABIHAIJ
You have to create Task Assignment Rule for this. That Task Assigment Tab is used for assigning that task to someone.
Suppose you have approval workflow and you have create Approval Task in that. Then you can assign it to anyone to approve that task.
In Task assignment tab, you select the user or group who will be responsible for completing that task. If you are giving some time duration in Escalation then it will escalate after that particular time but it tales value in ms.

OIM Task

If i have to send an email on immediate submission of request and i have a process task to do this, where i need to put the process task? I have only prov process and no approval.

As you are not having approval process definition, you may want to send it through the process definition.
So as I can figure out, provisioning task is getting assigned to user and you want to send email notification.
In process definition also you can send email using both Notification and Assignment tabs, these are OOTB functionalities.
You can also use custom code for the same create an adapter of the same and attach it in the process task.
Hope you are looking for this solution.

Execute powershell script in OIM task

Hi everyone,
I have a powershell script.
I want to execute this script on exchange machine.
How can I do this?
Can you send a code blok that executes powershell script if you have?
Thanks.
Best regards.

Hi FXE,
first of all, to protocol execution you can use the cmdlets Start-Transcript
and Stop-Transcript.
If it doesn't create a transcript at all, your error is with launching the console from task.
If it does create a transcript, you can (hopefully) see what the script wrote.
On general principle I'd recommend trying these things:
Try specifying the full path to powershell.exe
Make sure the user running the task has the necessary permissions
Make sure it's running as local admin (with maximum privileges)
Cheers,
Fred
There's no place like 127.0.0.1

Site backup task failure

Ever since I did a site recovery my site backups are failing, I know you can set it back to no then set it back to yes but thats all the options I have (and that didn't work btw).
MSB

Hello Marc,
I would personally try and solve each issue separately. If you can start the backup job manually by starting the service, then troubleshoot the directory structure first. If you look at the link I provided (updated), it shows how to trouble-shoot this. Here
is the direct link here:
http://blogs.technet.com/b/configurationmgr/archive/2012/08/01/support-tip-a-backup-site-server-maintenance-task-may-fail-to-run-in-configmgr-2012.aspx
Using Procmon with the filter settings listed really shows what each process is doing and why it failed.
Ken Jones
Senior SCCM Enterprise Engineer
www.linkedin.com/in/b0n3z/

How to call an external web service from OIM?

Hi,
I have a question on how to call an external web service from OIM within e.g. creating user process? How should it be done; through adapter and task in the process?
Any recomendations?
Thanks in advance!

it is not clear to me if you are having problems with calling java code from OIM or if the problem is the web service API.
Lets do some divide and conquer:
Can you create a simple java class that just writes a couple of lines to the log? Please attach this code to the OIM task and make sure it runs.
Once this works we can start looking at the web service call.
Best regards
/Martin

OIM Task Failure

Similar Messages

Maybe you are looking for