SSIS Database Transfer Task failure

Hi,
The Database Trasnfer Task has failed with the following error......
failed with the following error: "Invalid object name 'dbo.exampleViewName.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Does anybody know what this means?
Thanks,
Ben
Mr Shaw... One day I might know a thing or two about SQL Server!

That means that it cant find the object in the database. Has the table being dropped since the creation of the package?
Please check if table is still present in db and is under correct schema
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page
No the table has no been dropped.
I am running the task with the source database online.
Mr Shaw... One day I might know a thing or two about SQL Server!

Similar Messages

Check database integrity throws 665 error when executing check database integrity task in SSMS.

I have read all other cases that relate to this error and cannot get this to work. Running SQL Server 2012 sp1 on Windows server 2012 R2. Disk space and permissions are fine, but I get the error below when I try and use the check database integrity task
within my maintenance plan on both system and user databases. I have researched this and fragmentation is not the issue. I'm lost at this point and would appreciate at least some steps to try. databases are not "read only" as I have read this may
contribute to the problem. All other maintenance tasks run fine.
Error message from SQL LOG
Check Database integrity on Local server connection
Databases: All system databases
Task start: 2014-01-13T11:00:04.
Task end: 2014-01-13T11:00:04.
Failed:(-1073548784) Executing the query "DBCC CHECKDB(N'master', NOINDEX)
" failed with the following error: "A database snapshot cannot be created because it failed to start.
A database snapshot cannot be created because it failed to start.
MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to expand the physical file 'E:\\SQLdata\\MSSQL11.MSSQLSERVER\\MSSQL\\DATA\\master.mdf:MSSQL_DBCC9'.
The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline.
The database could not be exclusively locked to perform the operation.
Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous
errors for more details.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Error Message from Log File Viewer in SSMS:
Source: Check Database Integrity Task      Executing query "USE [ReportServer] ".: 50% complete End Progress Error: 2014-01-13 11:31:54.92     Code: 0xC002F210
Source: Check Database Integrity Task Execute SQL Task     Description: Executing the query "DBCC CHECKDB(N'ReportServer') WITH NO_INFOMSGS " failed with the following error: "A database snapshot cannot be created
because it failed to start. A database snapshot cannot be created because it failed to start. MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to
expand the physical file 'E:\SQLdata\MSSQL11.MSSQLSERVER\MSSQL\DATA\ReportServer.mdf:MSSQL_DBCC9'. The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not
support sparse files or alternate streams. Attempting to get exclusive access to run checks offline. The database could not be exclusively locked to perform the operation. Check statement aborted. The database could not be checked as a database
snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous errors for more details.". Possible failure reasons: Problems with
the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. End Error Progress: 2014-01-13 11:31:54.93     Source: Check Database Integrity Task
Executing query "USE [ReportServerTempDB] ".: 50% complete End Progress Error: 2014-01-13 11:31:55.02     Code: 0xC002F210     Source: Check Database Integrity Task Execute SQL Task
Description: Executing the query "DBCC CHECKDB(N'ReportServerTempDB') WITH NO_INFOM..." failed with the following error: "A database snapshot cannot be created because it failed to start. A database snapshot cannot be created because
it failed to start. MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to expand the physical file 'E:\SQLdata\MSSQL11.MSSQLSERVER\MSSQL\DATA\ReportServerTempDB.mdf:MSSQL_DBCC9'.
The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline.".
Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. End Error Progress: 2014-01-13 11:31:55.02     Source:
Check Database Integrity Task      Executing query "USE [AddressUpload] ".: 50% complete End Progress Error: 2014-01-13 11:31:55.13     Code: 0xC002F210     Source:
Check Database Integrity Task Execute SQL Task     Description: Executing the query "DBCC CHECKDB(N'AddressUpload') WITH NO_INFOMSGS " failed with the following error: "A database snapshot cannot be created because
it failed to start. A database snapshot cannot be created because it failed to start. MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to expand
the physical file 'E:\SQLData\MSSQL11.MSSQLSERVER\MSSQL\DATA\database1.mdf:MSSQL_DBCC9'. The database snapshot for online checks could not be created. Either th... The package execution fa... The step failed.

ReFS is NOT supported in use with SQL Server 2012. Once such item, which you've stumbled upon is the fact that alternate streams and sparse files are not implemented in ReFS and thus these issues are caused. You *could* force the checkdb to execute by using
WITH TABLOCKX but that'll require exclusive access to the database for the duration of the checkdb scan and that's not something I would advise to do.
Sean Gallardy | Blog |
Twitter

DWLoader works in SSIS Execution Process Task?

Does anyone knows if PDW's DWLoader works in SSIS Execution Process Task? Is there a sample?
I struggle to find documentation on using DWLoader.exe in Execution Process Task (EPT) of SSIS. There are articles in PDW BOL about DWLoader.exe or SSIS to load data, however, there is no article I
can find about using DWLoader.exe in Execution Process Task SSIS. I'd expect SSIS to behave the same way as we execute it in Command Prompt.
A working (dwloader.exe) command string when putting to run in [Execution Process Task] in SSIS failed and it is hard to trap the errors. Tried writing the error out in my command string, as well as setting the StandardErrorVariable of the task, neither
one caught the details about the error. I also put the same command string in a bat file and then ran it, it worked. I then used EPT to run my bat, that actually succeeded. (That indicated to me Execution Process Task might have interpreted my string differently).

Hi there,
I am trying to use the dwloader utility to load data into a PDW database. I have created a batch file with the following syntax:
dwloader.exe -M fastappend -m -i "D:\SS\DATA_LOAD.txt" -T BATCH_V0.dbo.ATC_LOAD_TBL -R "D:\SS\LoadErrors_ATC.bad" -t "|" -r "\r\n" "yyyy-MM-dd HH:mm:ss.fff" -E -S 10.11.12.13 -U ATC_Login -P Password > "D:\SS\Error.log"
But the execution fails everytime. The error log gets generated but its empty. Can someone help me with the syntax? Am I missing something here?
Thanks in advance,

How to execute SQOOP.cmd file from SSIS execute process task?

How to execute SQOOP.cmd file from SSIS execute process task?
What is argument need to be prefixed in the arguments property
Executable: C:\Hadoop\sqoop-1.4.2\bin\sqoop.cmd
Arguments: /C "sqoop import -connect "jdbc:sqlserver://mysystem:1433;database=test;username=myuser;password=mypwd;" -table emp -target-dir /user/emptable -m 1"
Thanks
Durga

Hi Durga,
SQOOP.cmd must be no different than any other .cmd/.bat I assume, your question is more about setting the parameters up I guessed.
So unless the arguments change dynamically you can call SQOOP.cmd from yet another .cmd that has its parameters passed to it and the former you simply set to run without the arguments in Execute Process Task.
Otherwise, in general to set a bat/cmd file to run in SSIS one needs to do this:
PS: It is a good idea to populate the working directory with the path to the .cmd
Arthur My Blog

SSIS Execute Process Task to Unzip Remote Files

I have created an SSIS Execute Process Task to unzip files on a remote server.
Executable: \\servername\c$\Program Files (x86)\7-Zip\7z.exe
Arguments: -o\\servername\d$\DBFiles\ -y x \\servername\d$\DBFiles\somefile.zip
The zip file size is about 40MB.
The SSIS task runs very slowly, close to 5 minutes. I know it should not take this long. When I remote logon to the server and run the 7z program to unzip the same file, it unzips in less than 10 seconds.
It seems that the way it is set up now, it constantly sending instructions back and forth from my PC to the server when I run the SSIS package on my PC.
I have 50 files of varying sizes that need to be processed daily. The SSIS unzip task takes 2 hours just to unzip these files.
How should I set up the SSIS Execute Process Task so that it can unzip files on remote server efficiently?
Many thanks in advance

The reason is that the files contain data that need to be loaded to the database. So, the zipped data files are copied to the server where the database lives. The SSIS package unzips the files and loads the database. The SSIS package is stored on the same
server. The server lives in the remote data centre.
My team run the SSIS package using Managament Studio running their PCs in the office, which is a different location to the data centre.
Since the package and files live on the same remote server, I would have thought that that would not be an issue. But the fact that we run the package locally means that the package is executed locally.
My goal is to put the zipped data files on the server, unzip the files, load data to a database on a remote server. I need to allow my team of 4 to be able to use Management Studio to run the SSIS packages to do the above. Would I be better off Remote
Desktop connecting to the server and execute the package there?
I will check out the PowerShell option.

Error while calling pscp.exe through a batch file which is called in SSIS Execute Process Task

Hi,
I am using Windows Server 2012 R2 Standard, SSIS 2012. I am trying to copy files from a remote location by calling pscp.exe through a batch file (FileCopy.bat at location M:\bin\) which is referenced in a SSIS Execute Process Task. My batch file content
is,
ECHO OFF
echo. >> M:\Prod\bin\SourceFile_FileLog.txt
echo %date% - %time% - Copy Start (XYZ_a201211155952avx0_69999.NOR.gz) >> M:\Prod\bin\SourceFile_FileLog.txt
M:\ProdFiles\bin\pscp.exe -unsafe -scp -pw aaaaa myuser@sourceserver:/ABC_data/*.NOR.gz M:\Prod\FromMediation\
echo %date% - %time% - Copy Complete >> M:\Prod\bin\SourceFile_FileLog.txt
The error I am getting is
[Execute Process Task] Error: In Executing "M:\bin\FileCopy.bat" "" at "", The process exit code was "1" while the expected was "0".
Exactly same setup but using Windows Server 2003 R2 Enterprise and SSIS 2005, this works fine and copies the files successfully.
Please provide some guidance on this.
Thank you!
'In Persuit of Happiness' and ..... learning SQL.

Hi,
This is what I am getting while running the batch file from command prompt
M:\bin\mttrb1>CDR_FileCopy
M:\bin\mttrb1>ECHO OFF
The system cannot find the path specified.
The system cannot find the path specified.
scp: M:\Prod\FromMediation\: Cannot create file
scp: M:\Prod\FromMediation\: Cannot create file
scp: M:\Prod\FromMediation\: Cannot create file
The system cannot find the path specified.
'In Persuit of Happiness' and ..... learning SQL.

Ssis execute process task error: process exit code was 1 while the expected was 0

Hi Sir,
in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file.
del \\servername\foldername\name.txt
rcmd \\servername D:\name1.bat
del \\servername\foldername\name2.txt
xcopy \\servername\foldername\file.txt \\server\foldername\outfilefolder
i am getting the below error message:
ssis execute process task error: process exit code was 1 while the expected was 0
i want know at what cases error exit code was 1?
Thanks for your time.

Hi prasad.alm,
The error is generic and can be caused by various factors. Here are some suggestions for your reference:
Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
Check there are no duplicate/existing files in the destination folder.
Try to run the package in 32-bit or 64-bit runtime mode.
If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
Regards,
Mike Yin
TechNet Community Support

SSIS-Execute Process task Error in 2012 version _File/Process "\\Servername\Foldername\batfile.bat" is not in path

Hi Sir,
I have develop the SSIS Package in 2012 version and i am calling the SSIS Package using Stored Procedure according to my requirement and that stored procedure will be using in my SSRS report Datasource.
once after the SSIS Pacakge has design and develop and deploy into the server as Project Deployment model..when i run the ssis Package ,calling through the SP it is working fine...
even when i design a SSRS report using SSDT(sql server data tools), in the SSRS reprot calling the above SP in Dataset.when i execute the SSRS report it is wroking fine...
once SSRS report has been deployed into the remote Server.. when i Execute the SSRS report i am getting the below Error message:
SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path
belo is the SP for calling the SSIS package.
DECLARE @EXECUTION_ID BIGINT,
        @PKG_RESULT INT
EXEC [SSISDB].[CATALOG].[CREATE_EXECUTION] @PACKAGE_NAME=N'abc.DTSX',
                                           @EXECUTION_ID=@EXECUTION_ID
OUTPUT,
                                           @FOLDER_NAME=N'aa',
                                           @PROJECT_NAME=N'xxx',
                                           @USE32BITRUNTIME=FALSE,
                                           @REFERENCE_ID=29 --unique identifier for environment
EXEC [SSISDB].[CATALOG].[START_EXECUTION] @EXECUTION_ID

Where the BAT part is ?
It looks like a security issue.
The account running has no permission apparently over "\\Servername\Foldername\batfile.bat"
Arthur My Blog

How Long Does SSIS Data Profiling Task Take?

Greetings All,
I have been doing all my data cleansing and conforming manually (was unaware of tools available to me). I am testing the SSIS Data Profiling Task on a table with 60,000 records. The Data Profiling Task has taken over an hour and is still
not finished.
My questions are these:
How long does it generally take for this task to run?
What drives execution time for this task?
What is this object doing behind the scenes?
Are there faster tools out there for data profiling?
Best Regards,

It depends on how much data you have in table and how many profiles you have selected for inspection.
Behind scene, it uses TempDB to create temp tables and use it further for profiling.
Below tools are available which are simillar to SSIS Data Profiling:
DataCleaner
DataMartist
-Vaibhav Chaudhari

Bizarre Task failure

I have a function module that performs a call transaction to create a transfer order. I have two tasks that call this function module; one tasks method calls the function and passes a flag to inform the transaction to be processed in foreground, the other tasks method calls the same function, but passes a flag to inform the transaction is to be processed in background mode.
The first task tries to create the transfer order in background; if it cannot create a transfer order, an exception is raised, and in the workflow the exception path then invokes the other task to create the order in the foreground.
In the test environment, this works as desired.
In the production environment, the background task **always** fails; However:
1) Processing the foreground transaction from the inbox always succeeds (I have 50 instances of this so far without failure)
2) If I use the Business Object Builder, and invoke the method used to create the object in background mode that the task uses, it works with no errors.
So in summary:
Test environment - no problem.
Production environment - background task always fails.
Production environment - foreground task always succeeds with no errors; uses same Function module but calls transaction in foreground mode.
Production environment - Can call the method in Business Object Builder test tool and it works fine.
This is also happening with another two tasks that I wrote with a different function module to do a similar transfer order creation.
Anybody shine some light on this madness?
- Tony.

Hi Mike,
WF-BATCH is exactly the same in Test and Production, APART from the email address was missing in production; I have just maintained that and now they are identical.
There is a task before these steps that provides the workflow container with material numbers, but this is to guide the workflow, and reads from a database entry that definitely exists at time of read (there is at least a day between the creation of the sales order where it reads this from and the creation of the transfer orders).
One other difference; both of the failing tasks are in two separate parallel paths of a fork (one for each material of up to two in the order). Can't see how that could affect things, but then again I can't see what's going wrong here anyway.
I have functionality in all of my tasks to write the transaction messages back to the IDoc that started the workflow off; I'm going to activate that when I get back to work, and see if that shows anything.
Cheers,
Tony.

DAC task failure: SIL_PositionDimensionHierarchy_AsIsUpdate_Full

Hi,
The Incremental DAC load failed yesterday night for two workflows:
SIL_PositionDimensionHierarchy_AsIsUpdate
SIL_PositionDimensionHierarchy_AsIsUpdate_Full
The workflows belong to the Out-Of-Box Container SIL_Vert.
The workflows populate zero records on other regular days, but this is for the first time it resulted in an error during DAC load.
The DAC log doesn't show any detectable error message with the root cause information. But since there were many dependent tasks running on top of it, they all got stopped and henceforth resulting in the DAC failure.
###########################DAC LOG######################################
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.1 HotFix10], build [412.0123], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Fri Jan 28 02:15:04 2011
Connected to Integration Service: [Integration_Service_SAMPGHSBL112].
Integration Service status: [Running]
Integration Service startup time: [Sat Dec 04 18:52:14 2010]
Integration Service current time: [Fri Jan 28 02:15:04 2011]
Folder: [SIL_Vert]
Workflow: [SIL_PositionDimensionHierarchy_Type1Update] version [1].
Workflow run status: [Terminated unexpectedly]
Workflow run error code: [0]
Workflow run id [46743].
Start time: [Fri Jan 28 02:14:43 2011]
End time: [Fri Jan 28 02:14:48 2011]
Workflow log file: [G:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SIL_PositionDimensionHierarchy_Type1Update.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Integration_Service_SAMPGHSBL112]
Disconnecting from Integration Service
Completed at Fri Jan 28 02:15:04 2011
=====================================
ERROR OUTPUT
=====================================
Error Message : Unable to get Informatica workflow return code. Check Informatica workflow/session logs.
ErrorCode : -1
Re-Queue to attempt to run again or attach to running workflow
if Execution Plan is still running or re-submit Execution Plan to execute the workflow.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:179)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:585)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
12972 SEVERE Fri Jan 28 02:15:05 EST 2011
ANOMALY INFO::: Error while executing task Informatica Session Batch
MESSAGE:::Submitted task failed during execution
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
com.siebel.analytics.etl.etltask.ParallelTaskBatch.submitIncompleteTasks(ParallelTaskBatch.java:251)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:360)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:326)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
12973 SEVERE Fri Jan 28 02:15:05 EST 2011
ANOMALY INFO::: Error while executing : com.siebel.analytics.etl.etltask.ParallelTaskBatch:Informatica Session Batch
MESSAGE:::com.siebel.analytics.etl.etltask.FailedTaskException: Submitted task failed during execution
EXCEPTION CLASS::: java.lang.RuntimeException
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:469)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:326)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::Submitted task failed during execution
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
com.siebel.analytics.etl.etltask.ParallelTaskBatch.submitIncompleteTasks(ParallelTaskBatch.java:251)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:360)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:326)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
12974 SEVERE Fri Jan 28 02:15:05 EST 2011
ANOMALY INFO::: Error while executing task All Task Batches
MESSAGE:::Execution of child batch Informatica Session Batch failed.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
#######################END OF DAC LOG#################################
After the first fail of the DAC load due, I marked the task as completed and restarted the Execution Plan again; the load failed again due to the second workflow mentioned above. I repeated the same steps and this time, it ran till the end to complete the load process.
The Informatica Log file for the particular workflow shows:
Message: Use override value [DATAWAREHOUSE.DATAWAREHOUSE.SIL_Vert.SIL_PositionDimensionHierarchy_AsIsUpdate.log] for session parameter:[$PMSessionLogFile].
Please suggest us if we can bypass the above mentioned tasks and we can exclude the same from our current Execution Profiles. If the dependencies on these tasks create issues, how do we modulate the same for successful DAC loads going forward. Also please specify the significance of these particular workflows.
Thanks-
Ramaswamy Pappula
Ph: 412-320-6796

Hi gs,
This is database dependent command
depending on conncetion type @DAC_SOURCE_DBTYPE
which DAC reads when you define Source database type in Physical datasources,
By default it will invoke the informatica workflkow SIL_PositionDimensionHierarchy_AsIsUpdate_ORCL
however if your
source is DB2 it will invoke workflow: SIL_PositionDimensionHierarchy_AsIsUpdate_DB2
source is mSSQL it will invoke workflow: SIL_PositionDimensionHierarchy_AsIsUpdate_MSSQL
source is Teradata it will invoke workflow: SIL_PositionDimensionHierarchy_AsIsUpdate_TD
Let me know if this helps.
Thanks,
Ani

SSIS 2012 Script Task to Get File Properties

Hello,
I researched on how to grab a file properties such as file size, file modified date, etc and I came across the following
link:
I followed exact steps and when I went to execute the package, I got the following error:
Below is the code:
// C# code
// Fill SSIS variables with file properties
using System;
using System.Data;
using System.IO; // Added to get file properties
using System.Security.Principal; // Added to get file owner
using System.Security.AccessControl; // Added to get file owner
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_cb8dd466d98149fcb2e3852ead6b6a09.csproj
[System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region VSTA generated code
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
public void Main()
// Lock SSIS variables
Dts.VariableDispenser.LockForRead("User::FilePath");
Dts.VariableDispenser.LockForWrite("User::FileAttributes");
Dts.VariableDispenser.LockForWrite("User::FileCreationDate");
Dts.VariableDispenser.LockForWrite("User::FileExists");
Dts.VariableDispenser.LockForWrite("User::FileInUse");
Dts.VariableDispenser.LockForWrite("User::FileIsReadOnly");
Dts.VariableDispenser.LockForWrite("User::FileLastAccessedDate");
Dts.VariableDispenser.LockForWrite("User::FileLastModifiedDate");
Dts.VariableDispenser.LockForWrite("User::FileOwner");
Dts.VariableDispenser.LockForWrite("User::FileSize");
// Create a variables 'container' to store variables
Variables vars = null;
// Add variables from the VariableDispenser to the variables 'container'
Dts.VariableDispenser.GetVariables(ref vars);
// Variable for file information
FileInfo fileInfo;
// Fill fileInfo variable with file information
fileInfo = new FileInfo(vars["User::FilePath"].Value.ToString());
// Check if file exists
vars["User::FileExists"].Value = fileInfo.Exists;
// Get the rest of the file properties if the file exists
if (fileInfo.Exists)
// Get file creation date
vars["User::FileCreationDate"].Value = fileInfo.CreationTime;
// Get last modified date
vars["User::FileLastModifiedDate"].Value = fileInfo.LastWriteTime;
// Get last accessed date
vars["User::FileLastAccessedDate"].Value = fileInfo.LastAccessTime;
// Get size of the file in bytes
vars["User::FileSize"].Value = fileInfo.Length;
// Get file attributes
vars["User::FileAttributes"].Value = fileInfo.Attributes.ToString();
vars["User::FileIsReadOnly"].Value = fileInfo.IsReadOnly;
// Check if the file isn't locked by an other process
try
// Try to open the file. If it succeeds, set variable to false and close stream
FileStream fs = new FileStream(vars["User::FilePath"].Value.ToString(), FileMode.Open);
vars["User::FileInUse"].Value = false;
fs.Close();
catch (Exception ex)
// If opening fails, it's probably locked by an other process
vars["User::FileInUse"].Value = true;
// Log actual error to SSIS to be sure
Dts.Events.FireWarning(0, "Get File Properties", ex.Message, string.Empty, 0);
// Get the Windows domain user name of the file owner
FileSecurity fileSecurity = fileInfo.GetAccessControl();
IdentityReference identityReference = fileSecurity.GetOwner(typeof(NTAccount));
vars["User::FileOwner"].Value = identityReference.Value;
// Release the locks
vars.Unlock();
Dts.TaskResult = (int)ScriptResults.Success;
Eventually I am looking to just grab the Modified Date from the Windows Explorer folder and insert into table. Any suggestions? Thank you in advance!
Sanjeev
Sanjeev Jha

Hi SSISJoost,
I am so glad you responded to this thread. You are absolutely right. I copied the entire code including the project name (guid) and that solved the error problem.
Now, what did you do to get the message box? I added the watch and I could see the values but how do I get these values in a table? If I remember correctly, in your blog, you mentioned something about using derived columns. I am familiar with Derived Columns
but how do I do that? I appreciate your response.
Thank you.
Sanjeev
Sanjeev Jha
I used a second script task to show all variable values. It has a
MessageBox in it and between all
variables I added a
newline to make it more readable...
But with an Execute SQL Task and parameters you can also put these values in a Table... or you can read the file in a Data Flow Task and add those variables (as metadata) to each record with a Derived Column
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path

Hi Sir,
I have designed the SSIS Package in 2012 Version. and i have deployed into the Integration Server,using Project Deployment Model.
In the SSIS Pacakge we are calling the batch file using Execute Process task.
when i am Executing the SSIS pacakge using Visual Studio(Sql Server Data tools) which is working fine.
When i Execute the Pacakge uisng Sql server Management Studio,after the Deployment i am getting the below Error message.
ExecProcess task:Error: File/Process "\\Servername\Foldername\batfile.bat" is not in path.
Thanks for your time.
Regards
Prasad

Hi Prasad,
When you say executing the package in SSMS, I think you right click on the package and execute it manually rather than execute it through SQL Server Agent job, right? How did you execute the package from the SSMS on DEV server? Have your also deployed the
SSIS project to the SSISDB catalog on DEV server or you used SSMS tool on DEV to connect to the QA server to execute the package?
When you log into the Database Engine instance, make sure the credentials you used has access on the shared folder which hosts the .bat file. Besides, I think the issue may be caused by the Windows UAC feature which may lower the permissions level of an
administrator to a standard user. So, I suggest that you run the SSMS as administrator to see if it works.
Regards,
Mike Yin
TechNet Community Support

SSIS File System Task Move File Could not find part of the path error

Hi All,
I am getting error in production when try to move files from one folder to another folder. But on Dev environment working fine.
An error occurred with the following error message: "Could not find a part of the path 'C:\Archive\ABC.txt'
My package configuration details.
1) For Each loop Container
Prop’s:
Enumerator: For Each File Enumerator
Folder: C:\
Files: *.txt
Retrieve File name --> Fully qualified
In Tab Variable mapping: User::name --0
2) File System task
Props:
Destination Connection: c:\archive\
Overwrite destination: True
Operation: Move file
Is Source Path Variable: True
Source Variable: User::name
Please share your suggestions on this.
Regards,
Vaishu

Hi Vaishu ,
Try below links :
http://www.allaboutmssql.com/2012/09/sql-server-integration-services-rename.html
http://social.technet.microsoft.com/wiki/contents/articles/18776.ssis-move-a-folder-from-one-drive-to-another-drive-using-the-file-system-task.aspx
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

NOT able to call exe in ssis execute process task

I am creating an SSIS package in which we execute an exe file from the EXECUTE PROCESS COMPONENT which contains the logics and uses few sp’s which checks the expiry dates of the certificates of some URL's. But when we keep the file on sever and run it through
TWS it is showing the error "FILE NOT IN PATH" .But if we keep the exe file in local path then it executes through TWS. If we run the package locally without TWS then it runs successfully no matter if the exe is in local path or placed in a shared
server folder. So i want to know is there any constraints in running the EXE file from the shared folder through TWS.
Note:
1.TWS- IBM Tivoli workload scheduler to call and execute ssis packages
2. TWS is install in different server (Like server A)
3. SSIS package and exe file located in different server (Like server B)
4. We are using dynamic path in SSIS package to locate SSIS package and exe file.

Hi SR_MCTS,
According to your description, a package that execute an exe file with Execute Process Task can be executed successfully without using TWS or the exe file stores in local path with TWS. While it fails when use TWS to execute the package with the exe file
stores in shared folder.
If in this scenario, it seems that the logon user that use TWS to execute the package has no access to the shared folder. We can logon as the relevant account or change some relevant settings on TWS to make sure the user has access to shared folder which
hosts the exe file.
Besides, since I’m not familiar with TWS, I’m not sure whether the issue is caused by there are some constraints in running the exe file from the shared folder through TWS. As to this issue about TWS, I suggest you post the question in the following forum:
https://www.ibm.com/developerworks/community/forums/html/forum?id=11111111-0000-0000-0000-000000002658&tags=tws. It is appropriate and more experts will assist you.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SSIS Database Transfer Task failure

Similar Messages

Maybe you are looking for