OIM11g: Error trying to define a connector

Hi all,
Has anyone seen this error before when trying to define a connector:
"getSelectDependencies encounter some problems: Population can be done in DBCreated Mode Only"
I can't find it mentioned anywhere?
Thanks for any help.

I strongly suspect this is down to 11g caching. I wanted to re-define an existing connector. To do this I loaded the old version back into 11g deployment manager just to look at the make up of it (did not import it). Then I tried doing a connector define. I think it picks it up from the cache.
Same issue as when you import a connector then change it and import it again, OIM often won't recognise changes in the deployment manager until it is restarted.
I don't have time to look into it in detail.
Wayne.

Similar Messages

  • Getting error when trying to create Exchange Connector in System Center Service Manager 2012

    Getting error when trying to create Exchange Connector in System Center Service Manager 2012
    The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
    Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
    Warm Regards, Pramod Kumar Singh Manager-IT

    Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
    Also, your question is related to SCSM, please post at SCSM forum if you have further question.
    Juke Chou
    TechNet Community Support

  • OIM11g: ERROR INSTALLING OID11G CONNECTOR

    Hi All,
    I am using OIM11G 11.1.1.5.0 and OID 11.1.1.6.0 and I am getting below error while installing the OID Connector (OID-11.1.1.5.0.zip):
    *oracle.iam.platform.utils.SuperRuntimeException: oracle.iam.platform.kernel.EventFailedException: An error occurred while executing the kernel event handler
    2012-10-30T10:17:57.833-07:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: eb0a823f54660468:-3634625d:13a9e2e37f9:-8000-000000000000a213,0] [APP: oim#11.1.1.3.0] IAM-0080046
    [2012-10-30T10:17:58.252-07:00] [oim_server1] [ERROR] [] [XELLERATE.DDM.IMPORT] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: eb0a823f54660468:-3634625d:13a9e2e37f9:-8000-000000000000a213,0] [APP: oim#11.1.1.3.0] Exception from Post Import handlers [[
    oracle.iam.platform.utils.SuperRuntimeException: oracle.iam.platform.utils.SuperRuntimeException: oracle.iam.platform.kernel.EventFailedException: An error occurred while executing the kernel event handler.
         at oracle.iam.configservice.impl.UserManagementPostImportForDm.postImport(UserManagementPostImportForDm.java:109)
         at com.thortech.xl.ddm.engine.util.Utility.callPostImportOpeartion(Utility.java:264)
         at com.thortech.xl.ejb.beansimpl.tcImportOperationsBean.performImport(tcImportOperationsBean.java:1200)
         at Thor.API.Operations.tcImportOperationsIntfEJB.performImportx(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:600)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
         at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
         at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy479.performImportx(Unknown Source)
         at Thor.API.Operations.tcImportOperationsIntf_uawk3z_tcImportOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
         at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
         at Thor.API.Operations.tcImportOperationsIntf_uawk3z_tcImportOperationsIntfRemoteImpl.performImportx(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:600)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
         at $Proxy483.performImportx(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:600)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
         at $Proxy518.performImportx(Unknown Source)
         at Thor.API.Operations.tcImportOperationsIntfDelegate.performImport(Unknown Source)
         at com.thortech.xl.webclient.actions.ConnectorInstallProcessAction.importXmlForInstallation(ConnectorInstallProcessAction.java:709)
         at com.thortech.xl.webclient.actions.ConnectorInstallProcessAction.completeInstallation(ConnectorInstallProcessAction.java:209)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:600)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
         at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
         at com.thortech.xl.webclient.actions.ConnectorInstallProcessAction.execute(ConnectorInstallProcessAction.java:108)
         at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
         at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
         at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
         at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
         at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
         at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
         at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:276)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:265)
         at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
         at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:120)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:76)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:121)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(AccessController.java:284)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: oracle.iam.platform.utils.SuperRuntimeException: oracle.iam.platform.kernel.EventFailedException: An error occurred while executing the kernel event handler.
         at oracle.iam.configservice.impl.UserManagementPostImportForDm.updateReconUserOldStateEntityDef(UserManagementPostImportForDm.java:385)
         at oracle.iam.configservice.impl.UserManagementPostImportForDm.postImport(UserManagementPostImportForDm.java:105)
         ... 101 more
    Caused by: oracle.iam.platform.kernel.EventFailedException: An error occurred while executing the kernel event handler.
         at oracle.iam.platform.kernel.impl.DefaultActionHandler.execute(DefaultActionHandler.java:48)
         at sun.reflect.GeneratedMethodAccessor1795.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:600)
         at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
         at $Proxy284.execute(Unknown Source)
         at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1035)
         at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
         at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
         at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:739)
         at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.process(OrchestrationEngineImpl.java:499)
         at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:444)
         at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:378)
         at oracle.iam.configservice.impl.UserManagementPostImportForDm.updateReconUserOldStateEntityDef(UserManagementPostImportForDm.java:383)
         ... 102 more
    Caused by: oracle.mds.core.ConcurrentMOChangeException: MDS-00165: metadata Object "/file/RECON_USER_OLDSTATE.xml" has changed
    MDS-00164: There is a concurrent "UPDATE" operation on the document "/file/RECON_USER_OLDSTATE.xml".
         at oracle.mds.core.UpdateableMOContent.constructConcurrentMOChangeException(UpdateableMOContent.java:1427)
         at oracle.mds.core.UpdateableMOContent.saveMOContent(UpdateableMOContent.java:1134)
         at oracle.mds.core.MDSTransaction.flushChangesToPTrans(MDSTransaction.java:838)
         at oracle.mds.core.MDSTransaction.internalCommit(MDSTransaction.java:2884)
         at oracle.mds.core.MDSSession.flushChanges(MDSSession.java:1043)
         at oracle.mds.core.MDSSession.flushChanges(MDSSession.java:871)
         at oracle.iam.platform.kernel.impl.MDSManagerImpl.modifyObject(MDSManagerImpl.java:78)
         at oracle.iam.platform.kernel.impl.MDSDefaultActionHandler.execute(MDSDefaultActionHandler.java:38)
         at oracle.iam.platform.kernel.impl.DefaultActionHandler.execute(DefaultActionHandler.java:41)
         ... 115 more
    Caused by: oracle.mds.persistence.ConcurrentDocChangeException: MDS-00164: There is a concurrent "UPDATE" operation on the document "/file/RECON_USER_OLDSTATE.xml".
         at oracle.mds.internal.persistence.db.BaseReposAccess.getMDSException(BaseReposAccess.java:2017)
         at oracle.mds.internal.persistence.db.BaseReposAccess.preparePathForInsert(BaseReposAccess.java:2296)
         at oracle.mds.internal.persistence.db.shredded.NewPath.insert(NewPath.java:164)
         at oracle.mds.internal.persistence.db.shredded.ShreddedReposAccess.saveDocumentInternal(ShreddedReposAccess.java:684)
         at oracle.mds.internal.persistence.db.shredded.ShreddedDBMSConnection.createOrSaveXMLDocument(ShreddedDBMSConnection.java:639)
         at oracle.mds.internal.persistence.db.BaseDBMSConnection.saveDocumentWithComment(BaseDBMSConnection.java:1874)
         at oracle.mds.internal.persistence.db.BaseDBMSConnection.saveDocument(BaseDBMSConnection.java:1690)
         at oracle.mds.persistence.DelegatingMetadataStoreConnection.saveDocument(DelegatingMetadataStoreConnection.java:487)
         at oracle.mds.internal.persistence.BufferedMSConnection.saveDocument(BufferedMSConnection.java:590)
         at oracle.mds.persistence.PTransaction.saveStoreDocument(PTransaction.java:1268)
         at oracle.mds.persistence.PTransaction.saveDocument(PTransaction.java:864)
         at oracle.mds.core.UpdateableMOContent.savePDocument(UpdateableMOContent.java:1809)
         at oracle.mds.core.UpdateableMOContent.saveMOContent(UpdateableMOContent.java:1090)
         ... 122 more*
    Any pointers to resolve this.
    Regards,
    Sunny
    Edited by: 968494 on Oct 30, 2012 10:20 AM

    Hi Nishith,
    Yes, my OIM is 11g BP02 which is not compatible. I need to upgrade it to 11.1.1.5.3 with patches 14163597 and 13897038.
    Thanks a lot for your help.
    Regards,
    Sunny

  • Error while Test Connection with Connector

    hi all:
         there is an error while  Test Connection with Connector , I also test it through sys administration->sys configuration->
    suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
    ***************ERROR 1 while *error while Test Connection with Connector ******************************************************
    Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this
    system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly
    ************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
    .runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
    9##0#0#Error##Java###04:4524/05/10_0077_6087550
    [EXCEPTION]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
    &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
    Please check the protocol and host entries for system &\#39;sapdev&\#39;.
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
    (AbstractIntegratorComponent.java:123)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
    (ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Hi,
    As per this part of the trace:
    Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
    You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
    (WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system  object
    with the hostname of the ITS server.
    Generally the template is
    <System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
    So that's why you got
    Please check the protocol and host entries for system ..

  • AE 5.2 Defining SAP Connectors

    Hello,
    Can someone identify to me the process in defining NEW SAP connectors for Access Enforcer 5.2?
    I have been configuring AE and have the process working for creating new users where the user receives the email identifying their password and the system they have been defined to once the provisioning is completed
    The SAP BASIS group who performed the installation have defined the connections as "VIRSAR3_01_MODEL and VIRSAR3_02_MODEL", for the DEV and PRD systems respectively.
    Our production system is known to users as SAPPRD and I would like to create a SAP connector that shows that as the name rather than "VIRSAR3_02_MODEL"
    I have tried to use the Define Connectors from the AE customization panel but have not had success in saving the definitions.
    I am thinking that the VIRSAR3_02_MODEL name may be a default used during installation and there may be more than just going to the AE Define Connector panel to add additional connectors or name them differently.
    Appreciate if someone can identify the proper steps I need to take; I would think the SAP BASIS group will need to be involved. This is somewhat new to them also.
    Thanks
    Jerry Synoga
    [email protected]

    Hello Listeners,
    I have researched this issue with our BASIS group and we have now become more familiar with the AE Connectors;
    The ones that I have been given are what is defined with the NetWeaver  installation and are defaulted to the VIRSAR3_01_MODEL and VIRSAR3_02_MODEL; these then become available in the AE Configuration process for defining SAP Connectors; these are the JCO connectors and will work if used for AE provisioning of NEW / Change users
    It is recommended by SAP that for this type of connection you should use a non-JCO connector which should be defined using the AE Configuration> Connector> Define SAP process; when I tried to do this and change the "name" of the connector, I would receive the ACTION FAILED message; the system log identified the error as a Duplicate Key (too bad the AE message was not that informative);
    we discovered that the Key setting was made up of the "short description" field of the Define Connector process; since I only changed the 'name" field, I was hitting the duplicate key error; one would have thought that the 'name" field, which would always be unique, would comprise of the key;
    The JCO connectors should be used according to SAP for communication between tools such as AE and CC ( Access Enforcer communicating with Compliance Calibrator; this is something I plan on getting to in the near future
    Conclusion is that if you need to change the JCO connector names to something other than the defaults, you can do this if you have access to the NETWEAVER ADMINISTRATION functions;
    The non-JCO SAP connector can be defined for communication between AE and the SAP backbends system; remember that the 'short description" field should be unique among all the connectors - JCO and non-JCO
    With this knowledge I have successfully completed the connector definitions and now have a better understanding of this process
    Hope this lengthy explanation helps others
    Thank You
    Jerry Synoga
    jerry,.[email protected]

  • Error when cloning a AD connector (cannot insert NULL into ("OIMUSER"."OIU"

    I am getting below error when trying to clone AD connector (new resource). I Imported/Exported AD resource Object, Process form and the dependent lookup tables.
    I can see the new resource object, process definition, process forms and Recon rule, when i tried provision a the new resource i see this error in logs.
    DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Importing ProcessAdministrator(XMLCREATED)
    DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Object is being created
    DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Creating data object
    DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT],Creating data object with params: com.thortech.xl.dataobj.tcDataBase@14d388c,41,null,[B@9355bd
    DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Resolving dependency to {UserGroup=SYSTEM ADMINISTRATORS}
    DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Dependency resolved with key: 1
    DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Saving data object
    INFO,23 Dec 2010 02:34:46,256,[XELLERATE.DDM.STATS],Purging 6 prepared statements
    ERROR,23 Dec 2010 02:35:52,663,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
    java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
         at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
         at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
         at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
         at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
         at com.thortech.xl.dataaccess.tcDataBase.writePreparedStatement(Unknown Source)
         at com.thortech.xl.dataobj.PreparedStatementUtil.executeUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.insertImplementation(Unknown Source)
    Please let me know if you have any idea..
    Thanks..
    Edited by: IDMuser19 on Dec 29, 2010 2:21 PM

    After Setting Database to DEBUG mode i see below errors in the log
    DEBUG,27 Dec 2010 16:26:44,850,[XELLERATE.DATABASE],select ost_launch_dependent, ost_key, ost_status from ost ost, obi obi where ost.obj_key=obi.obj_key and obi.obi_key=181
    INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
    DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
    INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
    DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
    INFO,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],DB read: select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
    DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
    DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],insert into oiu (OIU_KEY, OBI_KEY, USR_KEY, OIU_SERVICEACCOUNT, OIU_CREATE, OIU_CREATEBY, OIU_UPDATE, OIU_UPDATEBY, oiu_rowver) values (?, ?, ?, ?, ?, ?, ?, ?, ?)
    DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select OIU_seq.nextval from dual
    ERROR,27 Dec 2010 16:26:44,928,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
    java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
         at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
         at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    INFO,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
    DEBUG,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
    ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.SERVER],Class/Method: tcDataObj/save Error :Insertion of dataobject into database failed
    INFO,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
    DEBUG,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
    ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
    java.lang.Exception: Rollback Executed From
         at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
    Thanks .... Please reply if you have any idea..

  • Error in file filename : Database Connector Error

    Dears,
    I face a problem from several days with one of my deployed reports to CMS.
    The problem is the same reports run for some users and other users keeps to give them this error:
    Error in file <filename>: Database Connector Error
    Note: there is no filteration or any condition on users name and data resulted from this report is one for all users.
    I tried everything, even i remove all objects from the report and keep only page headers it works.
    But, if i readded any field from my DB object in crystal report the error appears again.
    Please help, Thanks in advance.

    Hello,
    You are using the original release of Cr XI R2. This has likely been fixed after applying all Service Packs and Fix Packs.
    You should update the BOE Servers also so before doing so please check with the BOE Administrator.
    To get the BOE patches you have to log into Service Market Place. To get CR patches make sure you have your keycode saved and available.
    Uninstall CR using the Add/Remove Programs in Control Panel and then use the Full version of CR XI R2 Service Pack 4 and you can then apply SP 6, if it requires SP 5 first please do so:
    https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
    https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
    https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
    We do recommend that BOE and CR be on the same patch level.
    Thank you
    Don

  • Error while installing AD exchange connector

    Hi All,
    When I m trying to install exchange connector 9.1.1.7.0 in OIM 11.1.1.3.0 I m getting the following error
    the error occurred while importing connector xml files
    please help me in this regards
    DOBJ.XML_IMPORT_ERROR
    oracle.iam.reconciliation.exception.ConfigException: oracle.iam.platform.entitymgr.SchemaUpdateException: CREATE TABLE RA_EXCHANGE12 (RECON_TABLE_KEY NUMBER(19,0) PRIMARY KEY NOT NULL,re_key NUMBER(19,0) REFERENCES RECON_EVENTS(re_key) NOT NULL,RECON_CHGLOGATTR_IDXLST VARCHAR2(256),RECON_DBOVERQUOTALIMIT18282E09 VARCHAR2(10),RECON_OTHERTELEPHONENU8FAAE255 VARCHAR2(20),RECON_ADSERVER6D5E9E00 VARCHAR2(19),RECON_DBUSERDEFAULTS311616E5 VARCHAR2(5),RECON_MAILNICKNAMEC69E0A1F VARCHAR2(50),RECON_DELETEDITEMFLAGS4B8499C1 VARCHAR2(2),RECON_MAILSTORENAMEF58A4893 VARCHAR2(300),RECON_SUBMISSIONCONTLED9766CE0 VARCHAR2(10),RECON_DELIVERYCONTLENG317E1988 VARCHAR2(10),RECON_PAGERNUMBER582E286 VARCHAR2(32),RECON_MAIL VARCHAR2(80),RECON_MOBILENUMBERF6563487 VARCHAR2(20),RECON_DBOVERHARDQUOTALE34CA3C8 VARCHAR2(10),RECON_LOGONNAMED4149F30 VARCHAR2(150),RECON_OBJECTGUID VARCHAR2(32),RECON_GARBAGECOLLECTIO4F439638 VARCHAR2(10),RECON_EXCHANGERECIPIENTB8EAAD7 VARCHAR2(10),RECON_DBSTORAGEQUOTA8D855431 VARCHAR2(10),RECON_DISPLAYNAME66894369 VARCHAR2(100),RECON_TELEPHONENUMBER7AECF325 VARCHAR2(20),RECON_EXCHANGEHIDEFROM83F62EF4 VARCHAR2(5),RECON_SAMACCOUNTNAME VARCHAR2(256))
    Regards
    Sri

    Did you tried and failed in importing the AD connector in OIM?
    Login to the OIM database and check if that table already exists. Do you get any other errors before or after this one in the diagnostic logs.

  • Error trying to establish connection to the EIS

    Hi,
    I created a simple Drag&Relate structure, With one InfoObjects as source and a R/3 transaction as target.
    it works fine but only with my user !!!
    When other user wants to use this functionality appear this message:
    <i>Error trying to execute a query statement against MetaMatrix: Error trying to establish connection to the EIS : Connection Failed: Nested Exception. Failed to get connection. Please contact your admin.</i>
    I verified that this user had permisions in BO and Iviews...
    I assigned him super_admin role, but it  isn't working
    what do I forget ?
    Regards.

    Hi All,
    Which method are you using for the backend connection, SAPLOGONTICKET or UIDPW?
    If it is SAPLOGONTICKET then the each user that you are using in the Portal runtime should be defined (same user name) in the backend that he access. If it is UIDPW then you have to map every Portal user which accesses the backend system to a user in the backend, via the Portal user mapping.
    Best Regards,
    Raanan

  • Error trying to open source media - Compressor 1.2.1

    I have a problem with a movie that have been sent to me. I seem unable to add it to a batch in Compressor or in Final Cut Pro 4.5 HD for the that matter.I'm using QuickTime 7.0.3 adn Mac OS X 10.4.3
    When ever I had it to Compressor I get this error:
    "Alert: Error trying to open source media file"
    http://www.saruken.com/temp/Compressor-Error.jpg
    And when I import it into Final Cut I get this error:
    "File Error: 1 file(s) recognized, 0 access denied, 1 unknown."
    http://www.saruken.com/temp/FCP-error.jpg
    The settings for the offending movie are:
    Format: H.264, 640x480, Millions, AAC, Stereo (L R), 22.050kHz
    FPS: 29.97
    Data Rate: 90 kbytes/sec
    Key Frame: Every 300 Frames
    The only difference between my test, which works fine, and this file is the frame rate (mine is at 25fps) and the number of audio channels (my test was in mono).
    The file I was sent was encoded in Compressor, not sure which one - but I think it might be version 2.
    The strange thing is it opens in QuickTime fine. I've tried exporting from QuickTime Pro as another h.264 with mono sound with no joy. I've tried saving a reference of the movie to see if that works, again no joy.
    The only way I can get Compressor to accept the file is by transcoding it to another codec, like Soreson 3. Then FCP and Compressor are happy.
    What I can't work out is why the h.264 file I made is fine (and any file I still make as well), and the one I was sent is not. I'm also having the same problem with an h.264 file I downloaded from Apple QuickTime Trailers, and an another I found on the web.
    Updates that have been done recently incase they might have caused the problem are 10.4.3 and installing Motion 2 Trail (since removed), which wanted to update Pro Application Support (this might be the problem?).
    Any help greatly apprieated
    Hami

    I just tried the offending movie file on my Powerbook, it has never seen Motion 2 or those Pro Application Support updates - and it gets the same error.
    Very odd indeed - any ideas?
    thanks in advance
    Hami

  • Error: there is a problem connection to the GPRS service in your registered home network, error trying to make data connection. this may be casued by a voice call, a wired activesync connection or inncorrect network setting

    like 2 weeks ago i called in to att to see how much is the data plan and it would end up costing $30.
    so i was like screw that. well they figured that i got a new phone replacing the LG shine. so they asked
    for to call this number so they can recieve data which would updated the system that i have a plam treo 750.
    ever since this conflict i can't send picture messages. i get that problem. everytime i attempt to send a picture
    i recieve this.
    - there is a problem connection to the GPRS service in your registered home network.
    - then i get a test that says error trying to make data connection. this may be casued by a voice call,
    a wired activesync connection or inncorrect network setting.
    please someone help me.
    btw. hard reset and soft reset did not work for me.
    Post relates to: Treo 750 (AT&T)

    problem fix, i had to call in. customer serivce. and when i called to ask about the plan. they blocked it. so i had to unblock my internet.
    Post relates to: Treo 750 (AT&T)

  • CR 2008 on SAP BW : Error on file filename : Database Connector Error

    Hi,
    We are facing a rather strange problem in our Prod box.
    When we run a CR with a mandatory parameter from EP or Infoview,
    For the first available LOV on Plant,  (Plant is the Mandatory Parameter entry for the report)
    For the first execution,
    the Crystal report fails to execute and throws the following error.
    Error on file <filename>: Database Connector Error
    When we re-run the report with the same parameters, it executes and displays the result.
    We are using Crystal Reports 2008 on SAP BW Query with SAP BW MDX Driver
    Since the users currently access this report, we need this get resolved asap.
    Any help is greatly appreciated.

    Hi,
    this is a forum so people will answer questions when they get to it.
    if you need help "asap" then I would suggest you open a case with SAP Support
    Ingo

  • Error trying to backup photoshop elements 4.

    Error trying to backup photoshop elements 4.  Getting windows error:  unable to save all data for file b0000408.jpg  data lost  try to save this file elsewhere; 
    and getting photoshop error "error encountered while writing file"  and a bunch of numbers.
    I have backed up to this device without problems.

    Thank you for your reply.
    I have tried the backup multiple times and it crashes in different places each time - it seems.
    I did the select all and "ctrl W".  This did nothing.  Did you really mean "ctrl + W"?  Remember I have version 4.0.
    I was able to do a successful back up onto a drive that has none of my pictures on it.  Could this be the problem?  I have an external hard drive that I have been using for my backups which have been working just fine.  I recently started storing my pictures in my catalog on this external hard drive.  Since then, I have not been able to back up to that drive.  Nor have I been able to back up to any other drive that has pictures on it.

  • Hyper-V encountered an error trying to access an object on computer ...

    I'd like to share an issue which occurred during one of my recent configurations as well as the associated solution which worked for me.
    While configuring Hyper-V Manager on a non-domain joined Windows 8.1 Enterprise client, to communicate with a non-domain joined Microsoft Hyper-V Server 2012R2, I received the following enjoyable message:
    Hyper-V encountered an error trying to access an object on computer '.....' because the object was not found. The object might have been deleted. or you might not have permission to perform the task. Verify that the Virtual Machine Management service
    on the computer is running. If the service is running, try to perform the task again by using Run as Administrator.
    As it turns out I forgot to change the machine name on the Hyper-V server. It's worth noting that it's also necessary to add an entry in the client machine's HOSTS file which matches the computer name of the Hyper-V server.

    Hi ITMAGE,
    Thanks for your sharing and support for this forum .
    It should be helpful to other people who are facing this issue .
    Best Regards,
    Elton JI
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • FPN - error trying to lookup object - remote role assignment not working

    Hello everyone,
    We have implemented a Federated Portal Network connection in our landscape between our portals.
    We use only remote role assignment functionality.
    Everything was working fine, but since 2 days we encounter the following error in the Default trace.
    Error trying to lookup object: alias: <role name>
    It is possible to open the producer portal in the Portal Content Administration and also searching for the Producer portal roles is possible in User administration. But when we assign the remote role the tab is not displayed in the portal only the above mentioned error is shown in the default trace. Our portals run SP 12 and BI Java SP14.
    Is there a solution or workaround for this issue ?
    Martin

    Hi,
    I have the same issue as you, I cannot see role tabs in Consumer portal and I get the same error in the defaulttrace as you.
    What did you do to resolve this issue?
    Many thanks
    Gordon

Maybe you are looking for