'Ol UFO Style Airport Extreme and Ancient Computers & OS

My tiny network= PowerPC G5 and iBookG4, both OS Tiger 10.4.11, and the mushroom/ ufo style Airport Extreme.
I can't tell if this Airport is on its' last leg, the signal has been diminishing and erratic the past few days, always worse at night.
I have done the soft and hard reset of the Airport, following the timing and sequence, Modem, Airport and Computer, waiting 10-15 mins in between.
The Airport shows full power, middle light constant green, the right light indicating the the base is communicating via the lan port is flashing and green. The left light indicating the base is communicating via airport is the one that appears to be failing. After a reset is flashes a little bit, then dims to a very low glow which remains constant.
I haven't had great signal strength in the past few days, and strangely it gets worse as the night wears on, making me think this has something to do with the my provider (Time Warner). I'm hard wired to the internet now, and it appears to be ok, not great speed, but it never is due to ancient cable wiring.
I have gotten the dim shade and "Restart Your computer" freeze on both computers after my last attempts to connect to my network which shows in the list, but with no signal.
I live in a mulit story building with lots of wireless, I've reset the channel to one that no one else is on.
Any thoughts are welcome and thanks in advance.

... Mine went automatically to Channel 7, so I guess that good?
If you set your AEBS's wireless channel to "automatic", it is supposed to choose the best channel it finds. Apple doesn't publish the algorithm by which it accomplishes that, but I surmise that if your AEBS chose that channel, things are probably as good as they're going to get until you can upgrade your equipment to 802.11n.
The kernel panics you describe are almost always due to some hardware incompatibility - the culprit is usually memory or some USB device. You can isolate the cause by removing or substituting suspect memory modules and USB devices. The increased fan speed is likely related to whatever caused the kernel panic, and will go away once you solve that problem. It also happened to me once in the distant past while I was trying to connect wirelessly peer-to-peer with a Windows computer. So, it's possible using Airport Utility with a flaky wireless link may have caused it, though I can't explain how.
Everything is going at once it seems.
Computers, at least as far as my experience goes with Apple's equipment, don't degrade gradually. Hard disks, optical drives, things with moving parts sometimes give you some warning before they fail completely. Power supplies usually fail catastrophically. All those things can be replaced. In general though, your computers and AEBS should keep on working until they becomes functionally obsolete.

Similar Messages

Verizon Fios - Airport Extreme AND Airport Express drop IP Address

Hi everyone,
I am absolutely BEGGING for help here! I am so frustrated with Verizon Fios that I can hardly take it. The scenario - the crummy Actiontec router that Verizon provided us when we got service 10 months ago shot craps recently. So, I got out my Airport Extreme to see if that would work. After 30 minutes of tech support I got it working, only to have all kinds of trouble with what they told me after FURTHER hours of tech support, was that my router was dropping the IP address.
So, knowing that I can't possibly be the only Verizon customer using an Apple router, I thought it was the Airport Extreme unit itself. I went out and got an Airport Express, and again, I am resetting my router or calling Verizon tech support at least once a day, if not more, to break the lease and get a new IP address. It's killing me. I can't live life like this.
Can ANYONE help me figure out how to get this scenario to work without having to purchase another crappy, ugly Actiontec router? I don't have FIOS TV, just internet. I can't tell you how much I would appreciate the help. It's driving me insane!!
Thanks so much in advance.

It appears that I am in same boat. I got FIOS last October and it worked seamlessly with my Airport Extreme/Express network for months. All of a sudden, we couldn't get to the internet after returning from vacation in late August. Reset, reconfigured, and tinkered with the Airport extreme and our computers, but could not get out to internet even though we could still print and see each other over the airport network. Contacted Verizon and they told me that they do not support the airport and that we have to use their Actiontec router for Internet access. Told them that we had been using our Airport, connected to their Actiontec, to access the Internet for months seamlessly and they said that that was not something they would recommend/support and that we had to go directly through their wireless router to get Internet support. I asked if they changed something in the last week that would prevent access and they would not confirm.
We also found that my son's older desktop with 802.11b wireless USB connection and MS OS can't even get out using the Actiontec router directly. Verizon site talks to 802.11b not necessarily being supported, but we had no issues when we were routing everything through the Airport. I just don't want to invest in all kinds of new network devices when we were fine until something happened over a weekend.
I am playing around with buying the latest Airport extreme (ours is a 802.11g model) to see if that works, but Verizon refuses to acknowledge that it's a viable solution and apologized to us that we have to switch between their network router and our Airport router to do routine printing, play music, etc., but they were not open to helping us prevent running multiple networks, either.
Obviously, this is unacceptable customer service, but Verizon techs that I spoke to do not feel that they have any obligation to support us with re-establishment of connectivity that we got with our original service. It sounds from this thread that other folks were getting disconnected or can't establish connectivity over the summer. Am wondering what Verizon is doing that is causing this and who else is getting impacted. Also wondering if upgrading to the latest Airport will help.

I'm having a hard time setting up my external hard from with my AirPort Extreme and Time Machine Backups.

I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.

It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.

How do I open ports on my airport extreme and assign a fixed IP Address for a device connected to my network?

I recently had a security system installed in my house. One of the features is an EPAD which enables me to have a virtual keypad on my iphone, and computer to operate the alarm system. The technician was not familiar with Mac's and Airports. How do I open port 80 to 80 in my airport and assign a fixed IP address for the EPAD? Apparently this is what is needed to make this work.

There are three ranges of "strictly local" IP addresses reserved for local Network use:
192.168.xxx.yyy
172.16.xxx.yyy
10.xxx.yyy.zzz
What your Router does for you is to act as your agent on the Internet.Your requests are packaged up and forwarded on your behalf, and only when a response is expected is the response returned to your local IP address.
Directing Network Traffic to a Specific Computer on Your
Network (Port Mapping)
AirPort Extreme uses Network Address Translation (NAT) to share a single IP address with the computers that join the AirPort Extreme network. To provide Internet access to several computers with one IP address, NAT assigns private IP addresses to each computer on the AirPort Extreme network, and then matches these addresses with port numbers. The wireless device creates a port-to-private IP address table entry when a computer on your AirPort (private) network sends a request for information to the Internet.
If you’re using a web, AppleShare, or FTP server on your AirPort Extreme network, other computers initiate communication with your server. Because the Apple wireless device has no table entries for these requests, it has no way of directing the information to the appropriate computer on your AirPort network.
To ensure that requests are properly routed to your web, AppleShare, or FTP server, you need to establish a permanent IP address for your server and provide inbound port mapping information to your Apple wireless device.
To set up inbound port mapping:
1) Open AirPort Utility, select your wireless device, and then choose Base Station > Manual Setup, or double-click the device icon to open its configuration in a separate window. Enter the password if necessary.
2) Click the Advanced button, and then click Port Mapping.
3) Click the Add button and choose a service, such as Personal File Sharing, from the Service pop-up menu.

Using an Airport Extreme and a Time Capsule at the same time

Guys I have had an Airport Extreme and a Time Capsule running together for nearly a year now and over the last few days the TC has been behaving badly. I changed its settings and now I'm in a mess. No, I can't remember the previous settings
Does anyone have a definitive list of the settings I need please? I have an ethernet cable modem, and the Airport Extreme is plugged into that as the main router. Two computers and the Time Capsule are plugged into the Airport Extreme using ethernet. The Time Capsule at the moment is just used as a network drive for Time Machine, but at some point I want to move it, with a long ethernet cable, and use it for extending the wifi in the house.
1. Should I connect the TC using its WAN port or one of the other ethernet ports? At present it's one of the other ones.
2. What TC settings should I use to have it function purely as a hard drive? At the moment there's some kind of conflict and my internet connection drops every 30 minutes.
3. Then later, what settings will I need to get the ethernet connected TC to extend the range of my wifi?
I read the Apple doc about WDS and tried setting the TC up that way. Then I discovered there is no WDS option in the AE Wireless settings. Only "Create a wireless network" or "extend a wireless network". The same setting on the TC has these options: "Create a wireless network" "Participate in a WDS network" or "extend a wireless network". Both devices have firmware 7.5.2. It didn't work with only the TC set for WDS, of course, but after that I can't get it back the way it was - which wasn't reliable anyway
Any help in exactly what the Wireless and Internet settings should be would be massively useful. Thanks!

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

Airport Extreme and Orange LiveBox (France). No access from Internet

Hi
I have bought an Airport Extreme and configure it to use BonJour and Mobileme to be able to access my connected (USB) hard disk when I am not at my home office. When I connect from other network I can see the device, but I can not access it. Actually even when I am at home I can only connect to the disk when I directly connect to the Airport Express, but not connecting via the LiveBox router. I have set up a DMZ zone directly to my Airport Express ID, but this does not seem to work either.
Anybody knows how to solve this?
Or what are the parameters for Orange in France so I can configure the Airport Extreme and get rid off the LiveBox?
Any suggestion?
Thanks!

Welcome to the discussions!
I would highly recommend that you use an experienced IT professional for your proposed network. He or she will need to make an on-site inspection and take a number of measurements to determine the best way to design the network.
In terms of network design, the "best" and far superior design will have a main router distributing ethernet feeds to a number of other wireless access points.
Just from your preliminary information, it's very doubtful that trying to "extend" using wireless only will provide the reliable service that you need.
Please consult with an IT pro (and try to avoid using someone's friend who "knows computers") before you take any further steps. The money will be well spent.
Message was edited by: Bob Timmons

Using a current Time Capsule with Airport Extreme and Airport Express Older generation

I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet? I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6. Is there a tool to assess the local network speed?
The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing. Not even streaming music seems to work and it stutters to halt.
I had expected that the dual band functionality would allow fast local connections where needed. What do I need to change?
Thanks you.
Tom

Hi Bob,
The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
- round extreme base station supports a printer only - remote WDS indicated in set up
- airport express supports remote speakers - set up does not indicate WDS status
I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network. Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network. It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network.
Obviously, this will need some more experimentation but any input would be appreciated.
Thank you and regards,
Tom
PS> Timezone wise I am currently living in Australia - must change my profile one day.....

Apple TV, Airport Extreme and Disk Sharing

Can I put all my photos, music, vidoes, etc. on a USB drive connected to my airport extreme and NOT need a Mac on to play music, etc?
In other words, will the Apple TV see the shared USB drive and pull from there?

Whether or not the movies are streamed or stored
locally on the atv, you will still have long menu's.
Not necessarily. iTunes allows you to limit what is stored locally on the Apple TV (for instance by syncing only so many recent or unwatched items, or just specific ones, selected from the category tabs). This is relatively easy to manage with the iTunes GUI, since even for long lists you have tabs, scroll bars, & clickable boxes, giving you much quicker access to list items compared to Apple TV's sequential menus.
Moreover, as the Apple TV drive fills up, it gives preferential treatment to content in a predictable hierarchy, which together with iTunes management of what is synced can keep stored item lists short & fresh. iTunes based management also allows for an effective form of parental control (by allowing only syncing with selected items from a selected iTunes library) & for different locally stored content for different Apple TV's. When you want (or want to allow) full iTunes library access, you can set up an Apple TV for streaming from selected computers.
Regarding USB-connected auxiliary storage in general, it isn't clear how it could be managed -- remember, there is no Finder (& probably not enough RAM to support it) in Apple TV, plus no GUI to support drag & drop or the other file system amenities we are accustomed to in OS X. It may be doable, but probably not in a manner appealing to non-geek type users.

Connecting AirPort Extreme and AirPort Express

Hi, I have a windows 7 pc connected to the internet with a dsl modem/router (technicolor TG587n v3 made by Thomson) and a Mac computer that gets connected wirelessly, but now I have purchased an AirPort Extreme and an AirPort Express and I want to connect the new AirPorts to provide a more stable connection and also to extend the wifi signal and connect a non wifi USB printer to be accessible by the other computers in the household. Would it be possible for someone to spell out all of the steps to be taken to achieve this? Many thanks

No worries. It was all to do with the sequence of events which happened as follows (bear in mind that I'm not a technical person). First of all I've left the original moden/router's connection as it was, then I connected the Airport Extreme to the original modem with an ethernet cable. After this I started Airport Utility and I chose to do a manual setup until it recognised the Extreme, once this was done I plugged the Express to a power point, then Airport Utility recognised the Express and once again I did a manual setup and voila!
The above steps are only a summary of what took place as I did get a little bit confused as the first person that attended to my enquiry was not an expert with creating networks. The second person was amazing knowledgeable.

Windows, Mac Non-wireless Mac, Airport Extreme and Printer

I bought a Canon Pixma MP500 printer at the Tice's Corner Apple Store. We wanted to put this in the back of our Airport Extreme and did so. Here is our hook up:
eMac Airport Extreme Cablevision Cable Modem
Printer
The eMac goes through the ethernet input, and the other ethernet input goes to the cable modem. We have a printer in the back hooked up as well. This Airport Extreme provides wireless security and working WiFi internet to the eMac, a wireless iBook G4 and a wireless HP-Compaq NC6220 Windows XP computer. We have the macs hooked up to printing correctly, just not the HP-Compaq. Thus it is wireless nad connects to our internet interface fine (yes, the wireless switch is on), it is a company computer with a VPN and firewall (that allows for printer installation). Note that the HP-Compaq nc6220 uses Intel ProSet Wireless as its wireless client. I tried installing Bonjour for Windows and the steps in the article in the link: http://docs.info.apple.com/article.html?artnum=107998and it did not work. Therefore, I cannot wirelessly print on all 3 computers. The main problem is the HP-Compaq. I am out of things to try.
If anyone has any advice, I would apreciate them to post back. Check back soon,
thatthaneguy
HP-Compaq nc6220 Windows XP Windows XP Professional

If the PC is connected to the work VPN then it is part of the work network and can no longer access local resources on your network such as a printer.
If the VPN is not operating then try these guides.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
iFelix

Can time capsule connect to ethernet through airport extreme and then send wifi on a different band ?

Hope this makes sense.
At the moment, an Airport Extreme (n) is connected to a single wall outlet by ethernet and sends wifi signals at both 2,4 and 5 GHz.
I would like to add a Time Capsule (also n), position it immediately next to or above this Airport Extreme and connect to the AE with a very short ethernet cable (so not extending the Extreme's wifi signal since that could reduce the signal's strength by half).
This way both are connected to the internet by ethernet (the AE directly to the wall outlet, and the TC to the AE's ethernet out), hence both should be able to send wifi at full signal strength.
In order to achieve full wifi strength I would then set the Extreme to (only) send at 2,4 GHz and the Capsule to (only) send at 5 GHz.
Please note that the house has an open (loft style) floorplan, so there's no reason to position the AE and the TC at a distance from each other for wifi reach throughout the house.
Dear Bob, what do you think? I've been reading up but didn't find a directly related post.
Is this the right way to go about it?
KInd regards.

I would like to add a Time Capsule (also n), position it immediately next to or above this Airport Extreme
The position immediately above is poor.. and next to each other is even worse.. you are blocking the antennas from one side or the other..
Please use a patch lead of around 2M (6feet) min.. and place them that far apart.
very short ethernet cable (so not extending the Extreme's wifi signal since that could reduce the signal's strength by half).
Having the devices link wirelessly causes the speed to drop by half which is caused by double hop wireless.. it does not reduce signal actually.. but you can have interference issues.
In order to achieve full wifi strength I would then set the Extreme to (only) send at 2,4 GHz and the Capsule to (only) send at 5 GHz.
Please note that the house has an open (loft style) floorplan, so there's no reason to position the AE and the TC at a distance from each other for wifi reach throughout the house.
The gap between two radio transmitters is so they don't flood the receiver on the unit next to them.. It has nothing to do with the room. If I stick two transmitter/receivers next to each other they need some space. It is also to give full access to the antennas which are spaced around the sides on the older N models.
You also cannot turn off one band.. If they are dual band models.. ie Gen3 AE and later. Gen2 TC and later.. they are permanently dual band. You cannot do anything about it.
You can simply set the channels.. although auto should work.. there are 11 channels for 2.4ghz.. set one to channel 1 and the other to 11.
At 5ghz there are heaps of channels.. set one to 36 and the other to 149.. or whatever is available.
You are not going to achieve anything much doing this unless you have more clients than bandwidth.. ie both boxes can fully service internet to up to 10 clients.. maybe more if each band is used properly.. you will gain nothing using two routers next to each other.
Beaten by your preferred forum eggs spurt.. !!

Airport Extreme and Airport Express on Ethernet Wired Network

I recently did work on my house and now have the house hard-wired for ethernet. I have an AirPort Extreme in my home office. That signal does not reach past the old part of the house (brick apparently blocks some of the signal). So I want to use my Airport Express in the new part of the house to have wireless in the new part as well.
Currently, I have the Airport Extreme plugged into the network, with the Airport Express plugged into the network in the new room. I get wireless connection in the office, but not in the new room.
I am not sure how to configure the base stations.
-- Do I need to use WDS? I am not currently, because each wireless router has its own independent wired link to the network.
-- Do I need to call the wireless networks by different names? Currently I have them both called the same thing.
-- Do I need to set the Airports for a different channel? Currently I have one on 10 and one on 11.
This should be very simple. Unfortunately, my experience has been that the Express base station is very difficult to configure, very quirky and not for the average user.
BTW, the Express is hooked up to the stereo and iTunes plays through that-- but remember it is a hard wired connection. Also both Airports show up in the Admin Utility, so no problem there.
Thanks.
~aviduser
1. Macintosh SE (1988)
2. PowerBook 180 (1993)
3. PowerMacintosh 7600 (1996)
4. PowerMacintosh G4 (2001)
5. PowerBook G4 12" (2003)
(Oh yeah, and there was the Newton MP2k)
G4 867 Quicksilver Mac OS X (10.3.9)

Do you have another router?
If not:
Connecting them together via Ethernet should be done like this:
Internet -> [WAN] AEBS [LAN] --> AirPort Express
The AirPort Express should so that the option to distribute IP addresses is disabled. The AEBS and Express should have the same network name and encryption configuration. The AEBS and Express should be on different channels.
This configuration will put all the computers on the same subnet. All of the computers will get IP addresses from the AirPort Extreme base station (AEBS).
OR connecting them via wireless should be done through WDS. The hardware connection should be done like this:
Internet -> [WAN] AEBS
The AirPort Express should not be connected to Ethernet.
See KB 107454, AirPort Extreme and Express: Using WDS to create a network from multiple base stations.
If you do have a router, then both AEBS and Express should be configured so that the option to distribute IP addresses is disabled. The hardware connections should be set up like this:
Internet -> router -+-> [WAN] AEBS [LAN]
....................|-> AirPort Express
The AEBS and Express should have the same network name and encryption configuration. The AEBS and Express should be on different channels.
This configuration will put all the computers on the same subnet. All of the computers will get IP addresses from the router.

Airport Extreme and DW7000

I have successfully used an Airport Extreme base station to run a Dell and Mac wirelessly via dial up. I now have a satellite connection with a DW7000 modem and wonder if it is possible to run both computers wirelessly with the Airport connected to the DW7000? Anyone know?
Thanks,
prea
Dell 9200 Windows XP Airport Extreme and DirecWay satellite connection

I solved this from another source,

Airport Extreme and D-Link DNS-323

I just setup a D-Link DNS-323 on my home network. My plan is to use it as a regular backup drives for two computers around the house. I had to do the initial set up of the drives with a PC but once that was done, I connected the DNS-323 to my Airport Extreme and I was able to connect to it no problem. My question is: how do I know what IP address the Airport Extreme is assigning to the drive. I need this address to be able to use a browser to configure the drive any further. Any hekp would be greatly appreciated.

Did you guys get any further with this?
I have a similar problem. My DSL modem syncs no problem when its sitting on its own or if I run a cable up the stairs and hardwire the network but as soon as I plug the Ethernet cable from my Airport Extreme Base Station into the modem, the DSL light starts to flash indicating it can't sync. If I unplug the Ethernet cable again, after a few seconds, the DSL modem will sync again.

Uverse - Airport Extreme and MacBook Pro assigned same IP address

Ok, so I have a Uverse RG -> Airport Extreme -> bunch of computers. For some reason, everytime my MacBook Pro sleeps and then I wake it up, it says it can't connect to the internet because there is another device with the same IP address. None of my other Macs (iMac, Powerbook, iPad, iPhones) ever exhibit this behavior. I'm not sure what's going on here. It's almost like the AE takes on the IP address of the MacBook Pro every time it sleeps (or maybe its the other way around). If I go to advanced settings on my MBP and try and renew the DHCP lease, it won't renew and continues to give me the same error message. If I log on to the AE and renew the DHCP lease, it comes back just perfect. This has to be an issue with my RG since it's assigning the IP addresses right? I tried manually setting the IP address of my AE. That seemed to fix it for awhile, but then the MBP again started reporting the same IP address as another device on the network. I didn't discover which device it was, but I did determine it was not the AE since it was configured with a manual IP address. This is getting pretty frustrating as I have to log on to the AE and reset the DHCP lease every time I leave and come back to my MBP. Anyone have any ideas what could be causing this?

I had the same problem with an Airport-enabled iMac.
Here's what I did that fixed the problem:
Log into the Uverse Admin Tool through your browser.
Click on the Settings tab.
Click on the LAN link in the grey bar
Click the circle in front of "Configure Manually"
Set the "Router Address" to 192.168.1.254
Set "Subnet Mask" to 255.255.255.0
Set "First DHCP Address" to 192.168.1.100
Set "Last DHCP Address" to 192.168.1.199
Click the "Save" button. (You'll probably have to enter your password.)
Now open the Airport Utility.
Choose your Airport Express on the left and click the "Manual Setup" button.
Click the "Internet" icon in the top bar.
Click on "TCP/IP"
Select "Manually"
Set "IP Address" to 192.168.1.42
Set "Subnet Mask" to 255.255.255.0
Set "Router Address" to "192.168.1.254"
Set "DNS Server" to "192.168.1.254"
Click the "Update" button.
This sets your Uverse router, which is handing out the IPs, to only give IPs out that number between 100 and 199. It reserves the rest for you to enter manually. So your laptop, your iPhone, etc, will get the DHCP addresses between 100 and 199 but your Airport Express will *always* have 42.
You may have to reboot everything to make sure each device gets the new IPs.
Also, there is no significance to the 42 number. It can be anything between 1 and 99.

'Ol UFO Style Airport Extreme and Ancient Computers & OS

Similar Messages

Maybe you are looking for