OLEDB Destination Fast Load Auto Truncation
I have one Data Flow task with OLEDB Source(for SQL Server) and OLEDB Destination(for SQL Server).
In OLEDB destination I have used Fast Load option. Also I handled error rows to move to error table.
In my source I have with columns column1(int) , Column2(Varchar(10)).
Destination has two column column1(int) , Column2(Varchar(7)).
Error table has 4 columns column1(int) , Column2(Varchar(10)), Error number(nvarchar(max)), Error Description(varchar(max))
In source, column2 values are more than 7 charactors.
When I run the package, destination loading only with first 7 charactors for Column2.Truncation happening for remaining charactors.I dont want to do like this.If the destination length is suufficient then the entire row should be moved
to my error table.
When I check Error tab option of destination Even Truncate also in disabled state to enable the redirect row.
Truncation must raise an error and the error rows should redirect in your scenario, so what you described does not make sense.
No, when writing to SQL Server the data will be truncated, without error.
The only thing you get is a warning when designing the package.
You get truncation errors when you try to put data longer than the column width in the data flow buffer, i.e. at the source or at transformations, but not at the destination apparently.
@Prabu: you can check the length using a conditional split. If the lenght is too long, redirect the row yourself to the error table.
MCSE SQL Server 2012 - Please mark posts as answered where appropriate.
Similar Messages
-
SSIS Fast Load fails to copy correct number of rows
Step 1 - truncate destination table
on success
Using obdc source table source to a odbc destination use a fast table load to take three colums out of source, and copy to destination.
In the source, column 1 is the primary key (int)
Other two columns are time stamps
Destination table, column 1 is int (no keys) - does not allow nulls, column 2 & 3 allow nulls
Noramlly the rowcount in the source and destination tables match after a run. However, on occasions, the destination table count is less than the source table. On the destination odbc source, we enable identify insert and check constraints. I can't see how we'd drop rows since by definition the row needs to existing in the source (we're copying the primary key).
The first time this occurred, anecdotal information is that the source sql server was under memory stress.
Has anyone seen this behavior before? Any ideas on how to resolve it?
KenI just ran into this same issue. After a solid half day of troubleshooting I found this little 'fast load' setting to be the culprit.
We have a very simple copy operation taking rows out of an ODBC source, adding a column and then stuffing them into a destination ODBC source. All the operations were run on a development machine with a local SQL Server install and plenty of RAM/CPU headroom.
I'd enabled logging of all kinds everywhere trying to detect the problem but nothing was tripped. When run under debug mode (in dev studio) I see the correct number of rows (684 in this case) reported being sent to the ODBC destination; however, when I look in the table itself I only ever see the first one.
As soon as I turned off the fast load option then I started getting the full data set moving over properly.
At this point, I'm of a mind to go through and remove 'fast load' from every one of my packages. I'll take reliability over speed any day of the week. -
Data flow from Flat file Source to OLEDB Destination
Hi All
I have Flat file Source data I am trying to Import OLEDB Destination so I am getting below
Whis Is Error I am getting at Flat File Source
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Flat File Source returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Can you please help Me I will Grateful to you Friends.0
[Flat File Source [2]] Error: Data conversion failed. The data conversion for column "LongName" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page."
[Flat File Source [2]] Error: The "Flat File Source.Outputs[Flat File Source Output].Columns[LongName]" failed because truncation occurred, and the truncation row disposition on "Flat File Source.Outputs[Flat File Source Output].Columns[LongName]" specifies
failure on truncation. A truncation error occurred on the specified object of the specified component.
Which Is error I have got Thanq for your time & let me know
Hi Visakh16 this is Complete error I have got -
Teradata fast load log file empty
hei all,
after update odi 11g teradata fast load script not running, error tells to see the log file but log is empty
any solution
naseerany solution please
-
IWeb site remade in Dreamweaver - cleaner code, faster loading?
I love iWeb. But iWeb sites load slow ... and there is a LOT of messy code in there (my web experts and html whiz friends tell me this). I've tried optimizers, but found they often create odd and unpredictable glitches on individual pages. And only speed up the load process by 10%.
I'm experimenting with designing the site in iWeb, then transferring all the materials\text\graphics into Dreamweaver ... to see if this gives me a faster loading site. I wonder if I'm wasting my time?
And I'd love to know a way to have the iWeb sites load faster ...
BenI don't think you can pin it down to a percentage for each page. If you watch WSM as it optimizes your files you will see the saving for each file in the window - if you are quick!
I publish my websites to Mobile Me to test them and then optimize and upload them to a commercial server. The difference in download time is noticeable.
Where WSM really scores is when trying to get your website to load in IE - the World's Worst Browser.
Pages that hang and lock up IE will usually load after optimizing.
I have had the band of missing background occasionally. Usually I would just run the files again and mistakes are corrected - sometimes it takes two or three passes.
After running the files again I launch the offending page in my browser directly from the WSM output folder (by double clicking the .html file) so that I can check it before uploading again. -
Does iWeb automatically compress photos for faster loading? Or should I do it first? Thx
Hi everyone, when I look at the large photo in the "white" theme's Welcome template, I wonder when I drag and drop one of my photos in, does iWeb compress the photo for faster loading? Or should I compress them before adding to site?
By "compress" I mean, make photo file size smaller! :)
Thx! :)In iWeb Preferences you can optimze images on import. But I always scale most of my images to 800 x 600 pixels prior to importing. I do this in Graphic Coverter which also makes the image files smaller by taking unneeded information out of the file, which also reduces the file size.
In Graphic Converter -
IWeb 09 any cleaner code? Any faster loading pages?
Just wondering if iWeb 09 has improved in writing cleaner\faster code? Are the pages loading any more quickly than in earlier versions. I've got half a dozen fairly complicated sites done with whatever the last version of iWeb was before 09 ... I'm wondering if I rework them, reload and republish them with 09, whether I will see any improvement in end-user performance (faster-loading pages)?
BenI have upgraded to iLife '09 seems that pages load EVEN slower than before! Especially on I.E. 6 and 7 browsers. I downloaded the trial of Maestro to see if that would help. No dice.
Site after Maestro: http://www.only2degrees.com/kktmp/Only2Degrees/Home.html
you don't even want to know how much worse it was before I ran Maestro on it. .iWebSite.js seems to be what super-bloats this iWeb. I can remove it, but then it disables all the links and buttons.
the java script seems to just loop and loop and loop and loop and... well you get the picture, all through each page causing it to load slowly. I too at each new release of iWeb hope that Apple has heard us and fixed this problem. They have not. I call and they tell me they will look into it and report it, etc...
In an ideal world everyone would own a Mac and use Safari or FireFox as their browsers. But it's not ideal, sure wish there was a better way for those of us who don't hand code or have the time to hand code to be able to use iWeb or anything similar to create decent websites.
Any suggestions or answers would be awesome!
Kerilyn -
Auto Truncat of text in table row.
Is there any way to truncate the text displayed in the table row. I need to auto truncate the text in case text does not fit in the row with current column height.
Hi Kevin,
I am also facing the same situation. I want to display teh text with truncated to 30 characters only. I identified the outputTexta nd added the truncateAt attribute and set it to 30. but it doesn't seem to work. Moreover the line - truncateAt="30" is underlined with orange squiggly lines indicating that there is some error and when I mouse over it , it says that this attribute is not supported when the component is inside of a hierarchyViewer component.
Any pointers?
Thanks,
Dhirendra -
why is iphoto faster loading images in full size than aperture?
aperture loads a proxy (lower res) image with the "loading" sign ontop of it and it takes several seconds until the full res high quality is loaded. while in iphoto it's loaded instantly.
any idea why and how i can speed up the loading in aperture?
thxWhat version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
SQL loader and truncate drop storage clause
Hi,
I check that during load data via sqlloader like that:
LOAD DATA
TRUNCATE
INTO TABLE TEMP_TABLE
FIELDS TERMINATED BY ","
(id,
text
it use reuse storage in truncate command. Is there any way to set truncate with drop storage option?But drop storage is the one which happens by default then You issue truncate command
From documentation
Use the TRUNCATE statement to remove all rows from a table or cluster. By default, Oracle Database also performs the following tasks:
Deallocates all space used by the removed rows except that specified by the MINEXTENTS storage parameter
Sets the NEXT storage parameter to the size of the last extent removed from the segment by the truncation process
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10006.htm
After additional reading I found out that sqlloader uses truncate with reuse storage by default and if You need drop storage, then You have to issue this command through sqlplus. There is no way how to mention it via controlfile.
Edited by: Laura Gaigala on Mar 3, 2009 12:26 PM -
Excel source multiple column values to oledb destination single column in ssis 2012
Excel sheet has 4 columns which is filled with data till 500 rows on each column. I want to insert those excel data into single column(PolicyIds) and am using oledb destination. In excel souce i dont hav any column header. Can anyone suggest me how can i do
this effectively. (May be i can use script task to get range of data and use it as SQL variable). Is there any best approaches.
Sample excel
A B C D
1001 1005 1009 1013
1002 1006 1010 1014
1003 1007 1011 1015
1004 1008 1012 1016Inside Excel Source, use Data Access Mode - SQL Command as below:
select F1 from [Sheet1$] where F1 is not null
union all
select F2 from [Sheet1$] where F2 is not null
union all
select F3 from [Sheet1$] where F3 is not null
union all
select F4 from [Sheet1$] where F4 is not null
-Vaibhav Chaudhari -
Tuning OWB 10g Mappings for fast loading
Hi,
What are the various techniques in which I can tune my OWB mappings for optimized performance?
Is it a good idea to increase my commit frequency from 1000 to say 25,000 to reduce I/O?
What other parameters could be important to the fast loading of data?
Thanks & Best Regards,
Harshad BorgaonkarIf you say loading, do you mean inserting?
If so, I gather from the fact that for you the commit frequency is relevant, that you are not using set-based loading, which is the fastest way to load records. Any reason why you don't use set-based loading, or didn't you know that the commit frequency is irrelevant in that case?
Kind regards,
Jaap. -
Error in creating JCo connection with destination type'Load-Balanced Con'
Hi,
I am working on webdynpro application(NW 04s), i need to connect with the backend system(ECC 6.0) using model.I configured my SLD and created technical system successfully.
The technical system got created with an error:
CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCApplicationServer.CreationClassName="SAP_BCApplicationServer",Name="ID1.Number.01.HostName.ahsides"
But the system got created so I proceeded with Jco connection creation:
I need to create 2 Jco connections for this,
First with Data Type 'Application Data' & Destination Type 'Single-Server connection'. Second with Data Type 'Data Dictionary' & Destination type 'Load-balanced Connection'.
The first Jco with 'Single-Server connection' got created successfully and ping and test is also successfull.
The second Jco connection with 'Load-Balanced Connection' got created successfull but it is throwing error while pinging and testing.
Ping Error : Failed to ping JCo destination 'WD_EMPLOYEE_RFC_METADATA_DEST'.
Test Error : com.sap.mw.jco.JCO$Exception: (102) JCO_ERROR_COMMUNICATION: JCO.Client not connected in repository call
Please help me in this.This problem was with 'Load-Balanced Connection' only.Hi,
Have you taken a look at the file %windir%\system32\drivers\etc\services?
If you haven't, try and find the line sapms<sid>, where sid is de SID of the system you-re trying to reach.
If the line isn't there write it down like this.
sapms<sid> 36<nr>/tcp
That works for me. -
I am getting error 'Failed to Load Auto Layout' while Generating Templates in BI Publisher 10g (10.1.3.4.2).
application.log says:
End tag does not match start tag 'group'.
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
at oracle.xml.parser.v2.NonValidatingParser.parseEndTag(NonValidatingParser.java:1395)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1340)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:362)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:308)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:306)
at oracle.apps.xdo.dataengine.DataProcessor.getSQLRTFLayout(Unknown Source)
at oracle.apps.xdo.dataengine.DataProcessor.writeDefaultLayout(Unknown Source)
at oracle.apps.xdo.servlet.resources.ResourceServlet.createAutoLayout(ResourceServlet.java:288)
at oracle.apps.xdo.servlet.resources.ResourceServlet.service(ResourceServlet.java:144)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.jav:303)
and
java.lang.NullPointerException
at oracle.apps.xdo.servlet.resources.ResourceServlet.createAutoLayout(ResourceServlet.java:283)
at oracle.apps.xdo.servlet.resources.ResourceServlet.service(ResourceServlet.java:144)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
Please help me on this. how to troubleshoot this issue.
Edited by: 931749 on May 20, 2012 9:58 PMI believe I am having a similar problem, except I did remember to remove the terminating semicolon after pasting my SQL query into BI Publisher.
I have a report which is simply a copy of a different report which works perfectly in all ways. The copy has only had its SQL edited, and I get the same error:
"Failed to load auto layout"
Also, the data won't finish loading into Excel when I hit the 'Excel Analyzer' button from the web interface from the 'View' screen. It leaves me with an empty sheet called 'remove_me_please'. I feel like removing the whole damned BI Publisher system from our servers when I see this.
What is so confounding is THE REPORT GENERATES VALID DATA! I can set the output to 'Data' and the XML produced is perfect. I can even make a pivot table in the Online Analyzer. I just can't autogenerate an RTF layout or use the Excel Analyzer. I'm using a fully updated version of .NET 2, and fully patched MS Office 2003 Pro. BI Publisher version is 10.1.3.3.2, and the Excel & Word add-ins are those downloaded from our BI Publisher server.
IT IS IMPOSSIBLE TO DIAGNOSE PROBLEMS IN THE QUERY IF THE QUERY WORKS IN MOST SITUATIONS. It works in Toad, and even in BI some ways. The SQL interpreter needs to be trashed and rebuilt from the ground up. This system stinks, Oracle! I have been very frustrated with BI Publisher for the 6 months I've been using it. That Query Builder has got to go, too! (No numeric aggregation? What is wrong with you?)
Furthermore, even after we update everyone's MS Office and .NET, the 'Oracle BI Publisher' menu doesn't even show up in half the installations we do. Everyone around here is starting to doubt that IT is really going to come through on their reporting needs. I'm thinking 6i sounds really good right now. -
Video Clips. Embed them or link them for faster loading?
Hello All,
Which method is better for iWeb (making the website load faster): I need to show some short video clips on the site I'm building, so should I embed the clips or just have a link that will redirect you to the site the has the clips (a site like Vimeo.com). Or does that make any difference in the loading time>
Thanks for your help.
MikeI found the problem with the software. You can not use Acrobat Professional 7.0 with FrameMaker 8.0 or you will not be able to properly Distil the PDF and the video will only be an image of the first frame. You are not able to install the Distiller 8.0 add-on that comes with FrameMaker 8.0 with the Acrobat Professional 7.0 installed. The console error received when creating the PDF is:
"Save as PDF failed to post-process the PDF file for Flash Data: errors were encountered in the PDF file.
The PDF file should be intact and usable but may not reflow properly. Check that the destination PDF file is not in use or its permissions, then Save as PDF again. If the problem persists, please contact Adobe Technical Support."
The fix is to remove Acrobat Professional 7.0 permanently and install the FrameMaker add-on or to upgrade to Professional 8.0
Maybe you are looking for
-
I can not open "www us army mil/" or most related web sites ...
I use the site a lot at work; it is also known as ako. It is a site created for use by US DoD personnel. If you type: - ako - into google several links appear. I can only open the one for their help page and their publicly available information pa
-
Building a Composite Business Process from Scratch-Guided 1 (Cannot Build)
Hi, I have tried to followed the document : Building a Composite Business Process from Scratch with SAP NetWeaver BPM u2013 Guide 1 to create my first BPM program, however, the program cannnot be built. I don't knoww how to fix the program, can you h
-
Apple's order process (simple question)
My imac is listed at "not yet shipped" but the shipping date has past (by one day). Is this normal? I've never ordered a mac before. I've researched there is three possible options for status ("not yet shipped", "prepared for shipping", and "shipped"
-
why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Cons
-
System Extension Cannot Be Used message pop-up
I just upgraded from an iMac power pc to a new iMac with snow leopard. I have an HP Photosmart B8850 printer and uninstalled the previous software driver and installed updated software. The problem is that I get a warning box with the message [ Syste