Omni 10 touchscreen does not work

I have a 4 month old OMNI 10 5600US, S/N [edited by Moderator]
The touchcsreen fails to start when I turn on the tablet. Since this is a tablet, I am perty much dead in the water.
How do i go about getting this fixed?

@george-p: Are you serious? This is just a bad joke, isn't?! Instead of helping a user to troubleshoot his problems and fix them, all you do is to quote the forum rules while completely ignoring the question itself. Great support you guys from HP doing there, just as I experienced also in the past. That's why I am done with this company's products!
@joe: you sure the touchscreen stopped working or the device maybe locked up after start? Try connecting a mouse and keyboard via USB hub and a USB OTG cable. If this works you can try to refresh windows without loosing your data.

Similar Messages

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Can I import photos to iPhoto if my touchscreen is not working?

I was just on vacation in Costa Rica and my phone broke there. The touchscreen does not work at all. When it stopped working my phone was in airplane mode and not connected to WiFi... I tried to restart it and nothing works. I am really hoping I can upload my photos to my iPhoto so I don't lose everything from my trip... I have made an appointment at the Genius bar but it isn't for a few days so I am hoping someone can help me in the meantime? Thanks.

Possibly if you both of your devices support iCloud, you have an iCloud account and you have Photo Stream set up on both devices. Set up correctly all photos taken by the iPhone will go into its Photo Stream and be imported into your iPhoto Library automatically. These Apple documents give more info:
iCloud: System requirements
iCloud: Photo Stream FAQ
OT

How to restart my iphone if the touchscreen is not working

My Iphone's screen freeze and the touchscreen is not working.
I cannot turn it off or unlock due t this problem.
How will I turn this OFF?
Thanks,
Jhelle

Start Here > iOS: Not responding or does not turn on
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

My Nokia c6 - 01 does not work

I wouldn't recommend buying this phone. It doesn't work. I have no apllications open and the phone runs out of battery after one day. I also had problems with the touchscreen not working , I can't send sms messages because the touchscreen for certian letters does not work, and incoming calls are not registered on the phone, I can hear the phone ring and can't get to it in time and there is no registered missed call - I can then hear it beep like someone has left a message, but no message is registered. When people phone I often can't pick up the call because the touch screen does not work. I bought my phone into a nokia shop and they sent it to be assessed. They said the phone had been water damaged which means my warrenty is not valid. I had not water damaged the phone. I had reported the problems I was having with the phone from when I first started using it, on the date of purchase. To top it off they have charged me $35 for them looking at my phone. I am so dissapointed with Nokia. The way they work is very unethical. I will never use their products again. Has anyone else had these problems?

Some of the behaviour you described does sound like the phone had been damaged by moisture.
There's many causes of moisture damage, for example:
Phone left in an overly humid or steamy place such as a kitchen or bathroom for an extended period.
Prolonged contact with sweaty skin, for example in your pocket whilst working out.
Placing a phone somewhere cold and humid, for example in a fridge or freezer (sounds silly but some people do this).
Phone dropped in the snow.
Splashes from drinks etc if left on a table.
I even once saw a phone that had moisture damage because a parent had allowed their young child to suck and bite the phone!
These are just some of the causes of moisture damage that don't involve dropping the phone in actual water!
If you feel that none of these apply to you then you will have to make an official written complaint to Nokia in your country.
As for the C6-01 I highly recommend the phone, it's good looking, tough and has a good feature set for it's price. My wife has had one since before xmas and it's performed great with none of the above issues. It even survived a drop down twelve wooden stairs totally undamaged. As with any electronic device she has been careful to protect it from sources of moisture.

Touchsmart 320-1030 Touchscreen is not working after OS re-install

HDD crashed, and was replaced with new, re-installed system from factory recovery CDs, now touch screen does not work. I have re-installed the drivers to no avail. system Properties says under Pen and Touch: No Pen or Touch Input is available for this Display. It used to work before the hard drive crashed. Is there a setting in the BIOS? or something else I may have missed?
Thanks

Hello @ncmich2,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the Touchscreen of your desktop computer is not working after replacing the Hard Drive, and I would be happy to assist you in this matter!
To re-enable the touchscreen features on your computer, I recommend re-installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My Iphone was dropped and now the touchscreen is not working....reset it and recharged and still wont slide for me ??????? what to do

i dropped my iphone and n ow it wont work ...i restroe it and recharged itand it still wont slide for me ....touchscreen is messed up.....everything else ok though???????

Did the reset process work? Have you seen the Apple Logotype after pressing the Home/Sleep button?
If that does not work, I'd suggest to restore iPhone. If even it does not work, your iPhone may need service.

Camera on new iPhone 3GS does not work

My husband got a brand new iPhone 3GS yesterday from the iShop here in Gateway Durban, and the camera does not work at all. You can see through the lense, but non of the touchscreen controls work (ie access to camera roll, take picture, swap to video.) Am I missing something obvious? This is perculiar, in that it is his second iPhone and I have the iPhone 4 so you would think between us we would be able to figure it out, but it does seen truly STUCK. Any ideas?

Have you tried to restore the phone?

HT4623 the wifi turn-on/off feature does not work on my iphone... it's stuck on off and won't turn on. Does anybody know how to fix it?

the wifi turn-on/off feature does not work on my iphone... it's stuck on off and won't turn on. Does anybody know how to fix it?

Hello khalidbadir,
I would be concerned too if my touchscreen was not responding on my iPhone. I recommend following the steps in this article to address an unresponsive touchscreen:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Thank you for using Apple Support Communities.
Best,
Sheila M.

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

A2109 tablet autorotate does not work

The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.

Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1

Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

Omni 10 touchscreen does not work

Similar Messages

Maybe you are looking for