OMWB Error #3004: Write to file failed

I was getting the above error while running the Access Exporter tool (both the 2000 and 2002 versions of the mde file). After some detective work, I figured out what was causing it and thought I'd share.
One of the MS Access tables I was trying to migrate to Oracle was named with a slash ('/') buried in the middle of the table name. Once I realized that, I renamed the table in Access replacing the slash with a space.
That fixed it. Hope this helps someone else!
Kevin Ferlazzo
DBA
VA Department of Juvenile Justice

Hi Tom,
Thanks for the feedback.
This issue is actually resolved in the latest version of the Exporter Tool, version 10.2.0.2.0, so such characters are handled before writing to files. The latest version of the Exporter tool will be available as part of the Application Migration Workshop in the upcoming Oracle Application Express release 3.0.
Regards,
Hilary

Similar Messages

ERROR: validate with data file failed

Hi,
We are using SAP BPC 7.5 NW SP08(Admin & client). We are trying to load transaction data from BW actual cube to BPC application for which we have written the following transformation file.
*MAPPING
CATEGORY=*NEWCOL(ACTUAL)
P_ACCT2=MVAL(0RECTOTSTCK|NEWCOL(PRODQU))
P_DATASRC=*NEWCOL(INPUT)
MATERIALBW=0MATERIAL
RPTCURRENCY=0LOC_CURRY
TIME=0CALMONTH
SIGNEDDATA=0RECTOTSTCK
*CONVERSION
TIME=Conversion for IM Actuals.XLS!CONVERSION
We want to map BW keyfigure 0RECTOTSTK (production quantity) to PRODQU - a member of the dimension P_ACCT2. And also we want to load the data from that key figure into our SIGNEDDATA field in BPC.
We have validated and processed the conversion file without error, but getting the following error while validating definition of the transformation file:
"ERROR: validate with data file failed"
Can you please help on this.
Thanks in advance.
Appu

Issue was resolved.We were trying to load data from the cube 0IC_C03.However, that cube had some non-cumulative key figures. BPC 7.5 SP08 does not allow data to be loaded from BW cubes having non-cumulative key-figures to BPC Cubes.This is a bug which will be rectified in SP11 according to SAP.
Since we needed only 0RECTOTSTCK which is a cumulative key figure we created a separate BW cube and loaded it from 0IC_C03 using only the necessary cumulative key figures and other dimensions.We then used the new cube to load data into BPC cube and it worked.

Corrupt file error while writting a file in compress mode

Hello,
I have a scenario where i am writting data in a file in appending mode with filter 'compress' addition using open dataset, on Al11 for the first set of records it works fine but if this file is accessed again for writting data in next select statement ( its between select endselect),the file is getting corrupted, if i try to open this file corrupt file error come. can someone help.
Thanks and Regards,
Gunjan

Hi Gunjan,
Unfortunately, you can't do in that way. The behaviour of that OPEN and FILTER 'compress' clause is to create a compacted file, to be read later, but it can be appended... all your writes go to a pipe and when you close the file this is sent to 'compress' program or other filter and than a compacted file is created.
You can't go back and start inserting again after close it.
Follow documentation:
http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET_OS_ADDITION.htm
The addition FILTER must not be used together with the addition AT POSITION or for the access type FOR UPDATE.
Regards, Fernando Da Ró

"click on the link for each error to highlight the location of the error in the PDF file" fails

I'm working on a document which has tables in it. When I run the accessibility checker for 508 compliance, it tells me the document failed the test (g) 4 Table element(s) with no TH child elements and then provides links to the 4 tables in question. Now, when I click on those links, nothing happens. I know it is supposed to take me to the location of the problem table, and in fact this has worked for me in other documents in the past. Why is it not working now? I could really use this functionality because there are more than 4 tables so I can't tell which ones are failing the test without Acrobat highlighting them for me.
Thanks!
Maddie

Hmm, I tried that but it didn't solve the problem. When I searched for the tables there was always something in the code for the table. Also, saving the PDF to HTML really messed up the layout of the file, so it was hard to tell how well it paralleled the code in the PDF file.
However, I don't know if this would give you any ideas, but these are links from the Accessibility Report, from the list "Structure errors: 7 table element(s) with no TH child elements."
This is one that took me to a table:
file:///U|/Booklets/second%20edition%202011-2016/booklet-2/Book.TwoTAGGED.pdf#page=26&high light=50,558,675,180
This is what ALL the other 6 look like (which, when clicked, took me nowhere):
file:///U|/Booklets/second%20edition%202011-2016/booklet-2/Book.TwoTAGGED.pdf#page=0&highl ight=-32768,-32768,-32768,-32768
It makes me think that there are some artifact tables floating out in space somewhere, at the location "-32768,-32768,-32768,-32768."
If there was some way for me to find them and either tag them as artifacts or delete them... that might solve the problem! Do you know if there is a way?
Thanks!
Maddie

Copy files failed: An unknown error occurred (-50), copy files failed: An unknown error occurred (-50)

Can't consolidate my library. Any clue as to the fix?

Do you have a line number? The script prossibly makes an unjustified assumption that the Album Artist field always exists though I thought I'd covered that one.
Looking at the script there are two locations where the value of .AlbumArtist is read - the second one shouldn't ever cause an error. The first one has never done so for me, but I suppose it is possible if the "first" track in your library isn't a standard audio track...
If the error line is 143 would you mind adding the following line of code before the current line:
If I=1 Then MsgBox .Name ' (letter i = numeral 1)
Can you find the object with that name in the library, and if so what kind of object is it?
tt2

Why do I get an error message saying FILE FAILED TO BE CONVERTED USING ADOBE EXPORT PDF ONLINE?

Can I find some help about why my Adobe online service suddenly start giving me an error message that says FILE FAILED TO BE CONVERTED USING ADOBE EXPORT PDF ONLINE?

Are you trying to convert through Adobe Reader (what version?), or directly at the https://cloud.acrobat.com/exportpdf website?
[topic moved to Acrobat.com Services forum]

HAS ANYONE HAD A PROBLEM WITH WIRELESS PRINTING ERROR RASTER FILE FAILED

My printer displays error message - opening raster file failed. Has anyone had this happen?

Lightroom should recognize your camera (assume it's LR3 or later) automatically without pointing it to the DCIM directory. The files you are referring to is system file I think and not the photos; thus OS cannot read the file.
Do you have a card reader? For some reason, if you connect your camera into Lightroom directly, sometimes LR doesn't show the preview of your images. Instead you'll get ? next to a gray box. If you don't have a card reader, just plug your camera in, ignore the ? and the gray box (this is LR problem, not your camera), then import them anyway. You should see your test shot once it's done importing.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Cannot write configuration file

Hello,
I have a problem loading up a project I have taken over from some one else. I need some guidance as I can't seem to find the solution. However im not that familiar with .NET or MVS as I once
was. The message I get is as follows :-
Microsoft Visual Studio
Creation of the virtual directory localhost:49623/ failed with the error: Filename: \\?\C:\Users\firstname.surname\Documents\IISExpress\config\applicationHost.config
Error: Cannot write configuration file
However I have checked the permissions and can't see anything obvious. Under guidance from another developer I have also updated :-
www.nuget.org/
and
www.nuget.org/packages/Microsoft.AspNet.Mvc
I am using a Windows 7 enterprise edition Dell Lattitude laptop. With MVS as follows
Microsoft Visual Studio Professional 2012
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
Installed Version: Professional
Microsoft Visual Studio Tools for Applications 2012   04938-088-1153812-02395
Microsoft Visual Studio Tools for Applications 2012
Office Developer Tools   04938-088-1153812-02395
Microsoft Office Developer Tools
Team Explorer for Visual Studio 2012   04938-088-1153812-02395
Microsoft Team Explorer for Visual Studio 2012
Visual Basic 2012   04938-088-1153812-02395
Microsoft Visual Basic 2012
Visual C# 2012   04938-088-1153812-02395
Microsoft Visual C# 2012
Visual C++ 2012   04938-088-1153812-02395
Microsoft Visual C++ 2012
Visual F# 2012   04938-088-1153812-02395
Microsoft Visual F# 2012
Visual Studio 2012 Code Analysis Spell Checker   04938-088-1153812-02395
Microsoft® Visual Studio® 2012 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V.
All rights reserved.
Visual Studio 2012 SharePoint Developer Tools   04938-088-1153812-02395
Microsoft Visual Studio 2012 SharePoint Developer Tools
NuGet Package Manager   2.8.60318.667
NuGet Package Manager in Visual Studio. For more information about NuGet, visit docs.nuget.org/.
PreEmptive Analytics Visualizer   1.0
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 11.0.5058.0
SQL Server Data Tools   11.1.20627.00
Microsoft SQL Server Data Tools
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 11.0.3436.0
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3436.0
Web Developer Tools   1.0.30710.0
Microsoft Web Developer Tools contains the following components:
Page Inspector: Tool that offers an efficient way to decompose Web Applications and diagnose front-end issues.
Web Publishing: Extensions required for Web Publishing for both hosted servers as well as on premises.
Web Form Templates: Includes the default templates for Web Form Applications.
Editor Extensions: Includes HTML, CSS, and JS editor extensions that greatly enhance the development experience.

I see some others have had success by removing encryption on the IISExpress folder and removing the Read Only attribute as well.
See this post for details.
Others have had success by doing the following:
- Run Command Prompt (cmd) in Admin Mode
- Enter the following command: DISM /Online /Cleanup-image /Restorehealth
...as detailed here.

Attempt to process file failed with Exception in XML Parser-format problem

Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karun

Hi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1

My 22 MB pdf file "Failed to export to Word."

I have tried several times to convert a 22 MB pdf file to Word, but I receive this error message every time: "File failed to export to Microsoft Word. There was an unexpected problem." No further explanation is available. I know my ExportPDF is working, because I have tested several other smaller files. I even tried using a different browser (Chrome and IE) and home and work computers. I checked the permissions of the document and I have all that are available. The pdf document seems to upload OK although it takes a few minutes because it's large, but then I receive the error message. I got the original file from an internet site (legitimate). Any ideas?

Try disabling OCR with these instructions: http://forums.adobe.com/docs/DOC-3062 to see if that helps.
If it doesn't, please open the PDF in Adobe Reader and choose File > Properties. Let us know what it says next to 'Application' and 'PDF Producer'

Attempt to process file failed with java.lang.StringIndexOutOfBoundsExcep..

Hello All,
I am implementing file2file with file going from shared folder to FTPS server.
I am using TLS and X.509 certificate in file receiver communication channel.
when I implemented my scenario, this is the error its throwing :
Success : Connect to FTP server "my ftp address", directory "/TEST/"
Error : Attempt to process file failed with java.lang.StringIndexOutOfBoundsException: String index out of range: 3
I know this error is caused when java expects the 3 character length string and if its getting more than that... Does any faced this kindaa problem before...Any help is greatly appreciated....Obviously even points....
Thanks,
Ravi

There is no custom code at all? No mappings, no custom modules, no pre/post processing commands?
Also, check if you get this error when sending to ftps server without certificate (or with another certificate). It may be an incompatibility issue with certificate.
Did you import the .pfx (or .p12) file in KeyStorage Service?
Regards,
Henrique.

Cannot write class file...

I have no idea what this means. This app was running just
fine. Then wham.
Here is the error message:
Errors reported by Java compiler: Found 1 semantic error
compiling
"D:/CFusionMX/wwwroot/WEB-INF/cfclasses/cfApplication2ecfm855244706.java":
1. public final class cfApplication2ecfm855244706 extends
coldfusion.runtime.CFPage{ <-------------------------> ***
Error: Cannot write class file "cfApplication2ecfm855244706.class"
because that name conflicts with the name of the class file
"cfapplication2ecfm855244706.class" in directory "cfclasses". This
is illegal because file names are case-insensitive in this system.
If anyone can tell me where to look and what to do here, I
would be very grateful.
Thanks,
Lee

Try clearing out your cfclasses directory which is located on
your machine at D:\CFusionMX\wwwroot\WEB-INF\cfclasses. Then
restart CF.

Error validating the transformation file

Hi All,
We have a Sales Application for which we are loading the data through flat file. The data file has been created and uploaded using UJFS. The transformation file is giving error while validating saying that conversion files do not exist. We have maintained the conversion files for each of the dimensions in BPC except the ones that have to loaded with a constant. Any help on the folllowing error log: The conversion files exist in the company folder. Please advise
[Start validating transformation file]
Validating transformation file format
Validating options...
Validation on options was successful.
Validating mappings...
Validation on mappings was successful.
Validating conversions...
The conversion file does not exist. (ZTIME.XLS)
The conversion file does not exist. (ZACCOUNT.XLS)
The conversion file does not exist. (ZPRODUCT.XLS)
The conversion file does not exist. (CHANNEL.XLS)
The conversion file does not exist. (ZENTITY.XLS)
Validation on conversions was successful.
Creating the transformation xml file. Please wait ...
Transformation xml file saved successfully.
Connecting to server ...
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
[The list of conversion file]
Conversion file: DataManager\ConversionFiles\ZTIME.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\ZACCOUNT.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\ZPRODUCT.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\CHANNEL.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\ZENTITY.XLS!CONVERSION
Task name CONVERT:
XML file (...BUDGET\SALES\DATAMANAGER\CONVERSIONFILES\ZTIME.CDM) is empty or is not found
Cannot find document/directory
Error: Validate with data file failed
Thanks,
Santosh

Hi Santosh,
I am sure you would done it correctly. However, just to be on the safer side, lets revisit all the steps.
From BPC excel, we create a new conversion. Check the name of the worksheet (not the workbook). By default, it will be Conversion. You can change it to something else also. Lets say, we change it to Account. So, the sheet's name is Account. We validate and save the conversion as myconversion.xls. This will create another file named myconversion.cdm. Check the location properly while saving the conversion file. The location would be
HTTP://server_name/appset/application/DataManager/ConversionFiles.
Save it under company folder.
Go to the server, where BPC has been installed. Go to the folder
\Webfolders\appset\application\DataManager\ConversionFiles
Check whether the conversion file is present or not. We should have both "myconversion.xls" and "myconversion.cdm".
Create a new transformation file. Under the *CONVERSION section, We define the conversion file to be used. The format would be
Dimension_Name=conversion_file_name.xls!sheet name
In our example, it would be myconversion.xls!account. (check the use of the conversion file name and the sheet name).
Save and validate the transformation file. Mostly, the issue is around the conversion file name and the sheet name. Check all the steps.
Hope this helps.

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from library to my nook. Error message: failed to write destination file.

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from the library to my nook. I get an error message: failed to write destination file. At first, this happened once in a while but now every time. Help!!!

Modern kobo books should just use regular Adobe DRM and be readable on compatible ereaders that are authorized to the correct Adobe ID.
I understand older kobo book had different DRM: but I wouldn't expect those to
When Adobe DRM book information say 'no copying', that generally means no copying outside those Adobe DRM limitations.
You should be able to copy within the restrictions. You can double-check that with the sellers (Kobo).
Just double-checking
the pocket book is Adobe DRM compatible?
that you have authorized your pocket book with your current Adobe ID?
menu/Help/Authorize Device when plugged into ADE: Library/Authorize Device if using the older more reliable ADE 1.7.2
If the pocket book is already authorized but to a different ID, you will need to deauthorize it first, ctrl-shift-E to ADE with device plugged in (or cmd-shift-E on Mac).
Be aware that will lose the ability to read DRM books authorized with the previous ID.

Getting "file failed to write" error while syncing.

I am syncing IPADs and IPODs (big family) over USB to a windows based machine. During large syncs it often fails with a message like "file failed to write." It is random as to which file fails. In fact if I keep trying it eventually syncs everything. It's like each file has some chance of failure and I just need to try enough times. It takes forever. Please help!
Some details
- I have updated with latest iTunes
- I have tried different USB cables and USB slots on the computer
Thanks.
-- C

Check out this Apple article -> 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
If you have a USB hub, try removing it and connecting the iPad or iPod to the back of the computer. If it isn't caused by the USB connection, the article suggestions will be a good place to start.

OMWB Error #3004: Write to file failed

Similar Messages

Maybe you are looking for