On Exit Pause doesn't work
Hi,
I have set a slide to pause on exit but it just won't work, it continues to the next slide and pauses. I know I must be missing something obvious but can't think what! Any help would be really apprectiated. Using Cap 7.
Thanks,
Hi Ryan,
Welcome to Adobe Forums!
You are not missing anything, you have applied the action in correct way.
But pause on exit works in this way, it will execute the pause action after exiting the slide.
You can also use an interactive object like click box or button on the last part of slide in timeline and set a pause on it.
Please check this discussion on Forum: http://forums.adobe.com/message/5496225
One of the users has suggested an advanced action to make the slide pause on last frame.
Thanks.
Similar Messages
-
Windows exit button doesn't work
Hi,
Does anybody know why the windows' red exit button doesn't work for my program?
ThanksHamed_47 wrote:
The close button is set to be in the menu, so I it's not in tle list of this close control.
Sorry, I did not understand what you mean.
The ring control lists all the controls you have on the panel, and usually there is a QUIT ot EXIT button. You may want to select this one.
What this ring control does is equivalent to setting the ATTR_CLOSE_CTRL programmatically, i.e. you define the ID of the control for which a commit event is generated when you select the Close item in the Windows system menu. -
Exit Customize doesn't work - other questions...
Firefox updated to Beta 29 (i didn't do it x_x) and everything is confusing me right now. Actually pissing me off to be honest. I was playing around this new, tried to customize it but didn't work. I followed this page and nothing. https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars the Exit Customize doesn't work at all. I have to quit firefox using Alt+F4 and start all over.
So, that doesn't work for me. How do I go back to the previous version of Firefox or how do I undo this Beta 29 thing? I really don't like it.You can check for problems with preferences.
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Guys, I've put a few hours researching the web for code examples on how to program the Exit button on a J2ME app. It didn't help me finding out why my Exit simply doesn't work. It must be something trivial that I'm just not aware of. I would really appreciate your help analyzing the following code.
Regards,
Filipe
public class BiblioMIDlet extends MIDlet implements CommandListener {
private Display display;
private Form gui;
private static Command renewCommand, exitCommand;
public BiblioMIDlet() {
renewCommand = new Command("Renew", Command.ITEM, 1);
exitCommand = new Command("Exit", Command.EXIT, 1);
gui = new Form("Biblio");
display = Display.getDisplay(this);
protected void startApp() throws MIDletStateChangeException {
this.showLoginForm();
private void showLoginForm() {
TextField user = new TextField("User", null, 9, TextField.NUMERIC);
TextField password = new TextField("Password", null, 4, TextField.PASSWORD | TextField.NUMERIC);
gui.append(user);
gui.append(password);
gui.addCommand(renewCommand);
gui.addCommand(exitCommand);
display.setCurrent(gui);
protected void pauseApp() { }
public void commandAction(Command c, Displayable s) {
if (c == exitCommand) {
destroyApp(false);
notifyDestroyed();
protected void destroyApp(boolean arg0) { }
}Hai
I think u missed to add the commandListener in your code "gui.setCommandListener(this)"
public class BiblioMIDlet extends MIDlet implements CommandListener {
private Display display;
private Form gui;
Command renewCommand, exitCommand;
public BiblioMIDlet() {
renewCommand = new Command("Renew", Command.ITEM, 1);
exitCommand = new Command("Exit", Command.EXIT, 1);
gui = new Form("Biblio");
display = Display.getDisplay(this);
protected void startApp() throws MIDletStateChangeException {
this.showLoginForm();
private void showLoginForm() {
TextField user = new TextField("User", null, 9, TextField.NUMERIC);
TextField password = new TextField("Password", null, 4, TextField.PASSWORD | TextField.NUMERIC);
gui.append(user);
gui.append(password);
gui.addCommand(renewCommand);
gui.addCommand(exitCommand);
/* u missed this line of code in your program*/
gui.setCommandListener(this);
/* End */
display.setCurrent(gui);
protected void pauseApp() { }
public void commandAction(Command c, Displayable s) {
if (c == exitCommand) {
destroyApp(false);
{ notifyDestroyed();
protected void destroyApp(boolean arg0) }
regards
jinesh -
USER Exit variable doesn't work in BSP
Hi gurus
I made a characteristic variable with user-exit replacement type.
It get the user id from sy-uname. It works well in Gui version. But when I execute the layout in BSP (WI), it doesn't work.
But If i do the hard-coding the line from (l_eto_charsel-low = uid.) to (l_eto_charsel-low = '4012121'.) it works well.
The following is my coding.
Please give me any comment.
CLEAR eto_charsel.
DATA l_eto_charsel TYPE upc_ys_charsel.
DATA uid type c. "(also I have tried 'data uid type sy-uname')
uid = sy-uname.
l_eto_charsel-chanm = i_chanm.
l_eto_charsel-seqno = '0001'.
l_eto_charsel-sign = 'I'.
l_eto_charsel-opt = 'EQ'.
l_eto_charsel-low = uid. ++++>
INSERT l_eto_charsel INTO TABLE eto_charsel.
ENDFUNCTION.
Message was edited by: Bryan LeeHi,
Your patch level seems to be OK.
pls. try the declaration as 'Data: uid like syst-uname' or you could try directly assigning the sy-uname.
Try to debug and see the content of the sy-uname, when it hits this code.
HTH,
Regards,
Nataraj. -
Currency conversion type by customer exit variable doesn't work
Hi all.
In my query I need amounts by quarter, applying quarters last date rates as currency conversion.
Query has Year parameter. Based on this parameter, by customer exits I calculate every quarters last date and use them as currency conversion types.
The problem is that query DOESN'T APPLY currency conversions!
I checked TCURR table - currency conversions do exist for applied days
I checked my customer exits - the date calculation works fine
I suppose where is something wrong in query processes (customer exits/currency conversions) sequence before running it.
Someone knows anything 'bout that?Check these docs.. and check again.
[Creating Currency Translation Types|http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6813e07211d2acb80000e829fbfe/content.htm]
[Use Variables for Currency Conversion|http://www.scribd.com/doc/7061035/How-to-Use-Variables-for-Currency-Conversion] -
On .swf files, the Exit button in the skin doesn't close the
file (it works just fine if the file is .exe). All the other
buttons work fine. Any ideas?Hi, I know this issue was a long time ago, but I am experiencing the same problem with a course that has been loaded into the LMS, the exit/close button on the playbar isn't working. I am using Captivate 5. I have published using AICC rather than SCORM, as there were some issues with the passing over of scores from the e-learning programme I'd built to the LMS which were resolved by using AICC. The close/exit button however did work when it was originally published using SCORM!
I'm considering just removing the exit/close button on the programme and putting a message at the start and at the end to say just close browser window to exit the programme.
I'd be very grateful if anyone could advise if there is anything else anyone could recommend trying?
Thank you
Sarah -
Hi everyone,
In screen painter there is the code:
WHEN 'EXIT'.
LEAVE PROGRAM.
But it doesn't exit the current screen. What's the problem? (leave screen doesn't work either.)
Thanks!Hi,
use this.
Process After Input.
Module exit AT EXIT-COMMAND.
in program.
Case Okcode.
When 'Exit'.
leave to screen 0.
Automatic field checks can be avoided by AT EXIT-COMMAND, Which works exactly the same way as cancel works on application tols bar.
EXIT button on the toolbar has FUNCTION TYPE 'E' only function type's can enter a module with addition AT EXIT-COMMAND -
Hi experts,
In screen painter I use AT EXIT-COMMAND to exit current screen as the following code. But it doesn't exit the screen if ok_code = 'create' while other ok_code work well. Can anyone tell me that's why?
Thanks!
module exit.
if SY-UCOMM = 'EXIT' or SY-UCOMM = 'BACK'.
LEAVE PROGRAM.
elseif SY-UCOMM = 'CLEAR' or SY-UCOMM = 'CREATE'.
CALL SCREEN 100.
endmodule.write this statement in PAI
and check weather sy-ucomm capturing the key r not
MODULE EXIT.
IF sy-ucomm = 'LEAV'
SET SCREEN 0.
LEAVE SCREEN.
ENDIF.
ENDMODULE.
Regards
Anbu B -
Customer exit variable doesn't work
Hi,
I tried to create customer exit for my query but iam not getting the right result.
My requirement is to create a Key figure variable that displays Q1 - Q4 based on fiscal year/period (001.2008) entered by the user.
steps I have taken
1. created variable MD_VAR for fiscal year/period
2. created key figure variable MD_VAR_KF where I have the description as Q1 .
and the result I have is Q&MD_VAR_KF& but I would like to get Q1
my code
data: lv_month type n length 3.
CASE I_VNAM.
WHEN 'MD_VAR_KF'. "KF variable
IF I_STEP = 2.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM ='MD_VAR'.
lv_month = LOC_VAR_RANGE-LOW+6(3).
IF lv_month = '001' OR lv_month = '002' OR lv_month = '003'.
L_S_RANGE-LOW = '1'.
ELSEIF lv_month = '004' OR lv_month = '005' OR lv_month = '006'.
L_S_RANGE-LOW = '2'.
ELSEIF lv_month = '007' OR lv_month = '008' OR lv_month = '009'.
L_S_RANGE-LOW = '3'.
ELSEIF lv_month = '010' OR lv_month = '011' OR lv_month = '012'.
L_S_RANGE-LOW = '4'.
ELSE.
L_S_RANGE-LOW = 'wrong values'.
ENDIF.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.
ENDCASE.
What did I do wrong and how do I achieve my requirement
thanksWhen you variable result displays the variable name inside &...& means the variable is not deriving a value.
Make sure the variable &MD_VAR_KF& is defined as a Text variable and as an Exit variable. Otherwise it won't process it in the exit.
If Fiscal Period is dependent on Fiscal Year Variant (I can't remember off-hand) then the variant key will preceed the Fiscal Period value in the variable, and the value is always processed based on internal format YYYYMMM. So your substring will be +6(3) if FYV dependent, and +4(3) otherwise.
You have focused the issue on the code but didn't clarify how you defined the variable itself. If these settings are correct then you need to debug the code to see what part works and what doesn't, then provide more details. -
Pause doesn't work in simulation
Hello all the freinds
I try to capture an elearning with my adobe captivate cs4 and it realy works very nice ,but I can't pause my simulation ,when I press PAUSE key ,it doesn't pause the simulatin ,but the End key works and end the simulation ,
would you please help me
I appreciate youHi there
Are you talking about trying to pause playback of a recorded demonstration? For example, you recorded a series of steps, you are playing it back and you are trying to press Pause to stop playback?
Pause is intended to suspend the recording process. Perhaps you began recording a series of steps, a window popped up unexpectedly, so you press Pause so Captivate doesn't record your action of dealing with the sudden new window. You deal with it, press Pause again and resume your recording.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
I have an AT&T calling card, and I'd like to use the pause button to dial the 1-800 number, code, and the international number. The pause button adds an extra space in front and I can't seem to use the function. Am I the only one with this issue? I purchased 3GS in January '10.
why are you trying to use a calling card with a cell phone.. those mainly don't work with cellphones.
-
User Exit EXIT_SAPLMGMU_001 doesn't work with all MM views
Hello,
I'm using user exit EXIT_SAPLMGMU_001 in MM02/MM01 tcode to check if valuation class is correctly filled and i've a problem when i select all views for material. In MM02, when i select Accounting View, i can make the validation because in user exit, structure wmbew is filled, but if i select all views, only structure wmara is filled, all others structure are empty.
does anyone can help me in this?
ThanksHI
CHECK WITH THESE USER EXITS
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Hope this helps !!!
Cheers
Alfred -
i upload my iPhone 4s and it went to recovery mode i have tried to exit recovery mode by pressing the home and the power bottom but it doesn't work what more can i do please help me
http://support.apple.com/kb/ht1808
-
Captivate 4 Pause Button Doesn't Work
Does anyone know why the pause in Captivate 4's buttons
doesn't work? I've rechecked my settings and it's still not
working.On the properties dialog of a button, under the Options tab
please make sure that the "Pause after:" check box is checked.
Additionally, the time entered for this field should be comfortably
less than the slide time so that the slide could be paused well
before it ends.
For eg: if the slide duration is 3 seconds then I would
advise you to have pause after time to say something like 1.5
second.
Maybe you are looking for
-
Error while using user defined function in reports
Hi, When I use the below user defined function in oracle reports I got the wrong number of arguments error select test_function(id,a_number,v_date-14,b_number) from dual; If I remove -14 from the argument it works. But iIneed to subtract 14 days from
-
HP Pavilion dv6-6b56er and Windows 7 x64 Professional
Hello. I've purchased Pavilion dv6-6b56er with pre-installed Win7 x64 Basic, which is not convenient for me, because of it's lack in functionality. So I've made a full backup of pavilion's hard drives and deleted all software from it. Then I've insta
-
IBooks Author strips tab stops from Table of Contents
Tab stops that are generated from section names are stripped from published iBooks Author files. When I click on Table of Contents in iBooks Author, I can see it exactly like it should be. Please see the screenshot that I have uploaded tabs.jpg.
-
How to delete all the crystal reports from SAP B1 ?
Dear Experts, I have one problem and I need to Delete all the Crystal PLD's and Crystal Reports from SAP B1. I can delete a PLD or Report using delete option from Report and layout manager or layout designer. But I need to select delete option for ea
-
HD memory disappears upon export
I recently updated my Retina MacBook Pro to the 10.8.2 Supplement update 2.0 and now Motion is acting odd. I've been working on a project for the past few days, prior to updating, whenver I exported a video it would work as predicted. Now, after th