Adapter monitoring: SOAP is grey although it is used?

Hello everybody,
5 minutes ago I checked our SOAP receiver communication channel and send a message. But in adapter monitoring the SOAP adapter is shown in grey instead expected in green.
So how can I see, if the SOAP adapter works correctly?
Thanks a lot, regards Mario

Hi Mario,
SOAP channel will show either Green or Red only when atleast one message has been processed thru the SOAP channel,
First, for this message, check the SXMB_MONI status? Is it showing Black Flag ??
Else try to activate the adapter once again, just refresh the cache and the send the message once again..
Also have a look into this thread-
how can i enable SOAP Adapter?
Regards,
Moorthy

Similar Messages

In the rwb adapter monitoring the JDBC Adapter always grey

Hi all
I try to use JDBC Adapter in XI 3.0 sp14.
First I deploy the MS SqlServer JDBC by SDM RemoteGui.I can see the deployed JDBC package in \j2ee\cluster\server0\bin\ext\com.sap.aii.af.jmsproviderlib.
Then I create a communication Channel using JDBC 2.0 in a Business System and active the configuration.
But when I monitor JDBC Adapter in the rwb, I find the JDBC Adapter is always grey.In the \server0\log\services\com.sap.aii.adapter.jdbc.svc, no log shows the jdbc adapter is initial.
So what extended configuration shall i do.
Thanks in advanced
Elliott

hi Alessandro,ravi:
Thanks for your reply. I will describe detail.
I use a file adapter as a sender and use a JDBC adapter as a receiver.
In the sxmb_moni I find the processed message status is successful.
So I think the integration server works fine.
In the message monitoring, the message is waiting status.
If I change the receiver adapter to file adapter.
It works fine.So I think the process config is fine and the itegration server works fine. the error is in the receiver JDBC adapter side.
I check the default trace, there is error logs:
#com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer
#sap.com/com.sap.aii.af.ms.app
#com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(QueueMessage, MessageController, Services)
#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction :
[057ffffffb160017c]
#cgbasis.comgroup.cn_XID_5746950#XIAFUSER#0a056bc0900311daa9ca0013d4b31c7c#SAPEngine_Application_Thread[impl:3]
_36##0#0#Error##Java###Rolling back transaction for
message due to: #2#d2fe2281-8fd4-11da-cf7f-
0013d4b31c7c(INBOUND)#Object not found in lookup of
SapXIJDBCAdapterService.#
#com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer#sap
.com/com.sap.aii.af.ms.app#com.sap.aii.af.ra.ms.impl.core
.queue.ReceiveConsumer.invokeHandler(QueueMessage, MessageController, Services)
#J2EE_GUEST#0##cgbasis.comgroup.cn_XID_5746950#XIAFUSER#0
a056bc0900311daa9ca0013d4b31c7c#SAPEngine_Application_Thread
[impl:3]_36##0#0#Error##Java###Transaction rolled back
for meesage due to: #2#d2fe2281-8fd4-11da-cf7f-
0013d4b31c7c(INBOUND)#Object not found in lookup of
SapXIJDBCAdapterService.#
In the adapter monitoring, JDBC Adapter icon is grey. I
can't click for detail information. I only deploy the
JDBC drivers by SDM remoteGui. What else shall I do.
Btw, Can you say sth detail about how to test the
deployed JDBC adapter on visual administrator?
Thanks
Elliott

SOAP Adapter option is disabled in adapter monitoring

Hi
I am trying a simple SOAP to FTP scenario. I have done all the steps in the repository as well as the directory and i have even activated it, but in adapter monitoring the SOAP adapter option is disabled.
Hope someone could help me out on this.
Thanks & Regards
Rahul

Hi Rahul,
We have also faced this type of problem. But at that time we were calling XI from a ASP.Net page.Just a few suggestions which you can try out :
1) Using XMLSPY and your wsdl file, try sending a SOAP request to the XI. If you got the response then there is no problem with your scenario.
2) If you didn't get the response or any erro comes then try recreating a new scenario nad repeat 1) (we have to do this after that only we got success )
3) Check your webdynpro code which call the XI server. Have a look at this weblog :
/people/sap.user72/blog/2005/09/15/connecting-to-xi-server-from-web-dynpro
Hope this will be helpful.
Regards
Suraj

Adapter Monitor Adapter on greyed out

Hi
Under RWD --> Component Monitoring -->Adapter Engine --> Adapter Monitor some of the Adapter(File,RFC,JDBD,JSM,Soup) are greyed out.
We are useing XI 3.0,
any Solution or idea is highly appreciated.
Thanks
Madavi

Thank you for your reply,
i have check the cache is uptoday, but when we do cache refresh it give a error
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://100.4.35.6.0:50100/CPACache/refresh?mode=full'. Line...
CPA cache refresh (mode=full) successfully executed in 164135 milliseconds"
once the refresh is done i can not see the Adapter in Adapter Monitor .and then we restart the services in VA it come back.
sicf look good all services are active
can you please tell how to one comunnication channel using file adapter and activate
Thanks
Madavi

No "Adapter monitoring" in runtime workbench

We appear to having difficulties with our SOAP adapter in XI 3.0.
I have searched through the forum, and most queries relate to SOAP Adapter being greyed out in adapterframework, but it is not even available in the list.
We do no have the Adapter Monitoring as an option in our runtime workbench, either. How can we add this?
Any thoughts gratefully received!

Hi Barry,
have you tried: http://server:port/mdt/amtServlet ?
this is the address of the adapter monitoring
the old address ( < sp4 as far as I remember) of the adapter monitor:
http://hostname:portnumber/AdapterFramework/monitor/monitor.jsp
regards,
michal
Message was edited by: Michal Krawczyk

J2EE adapter monitoring problem/no error description found

Hi!!!
I have a problem with J2EE adapter monitoring.
When I use SOAP adapter (receiver, asynchronous mode)
and there is an error in Web Service (for example,
the structure of the message is incorrect) then in Workbench
(in an adapter monitoring) I can only find information that
there is "application error" and nothing more
(I searched also logs and I didn't find anything).
But when there is an error in Web Service then
there are details about this error in ACK message,
for example that required tag is omitted
(I can see this information in the TCPMonitor when
I configure it between SOAP adapter and Web Service).
In "old days" when I use plain Adapter Engine
I could find all information about errors
in Integration Engine Monitoring (sxmb_moni):
- error message (like "application error") was in the "error" node,
- and details about this error (like "java.io.FileNotFound" (...), for example)
were in the "trace" node.
I suppose there is something wrong with my eyes now that I can't see these details,
so please tell when can I find that.
We have SP12.
Regards,
Andrzej

Hi Andrzej
Check this OSS Note 856597
cheers
Sameer

Adapter Monitor don't show my Sender Adapter

Hi people
I created an scenario to communicate XI 3.0 with a Sender SOAP Adapter.
When I access to the Adapter Monitor of the Runtime Workbench, it shows me the SOAP Adapter inside the Adapter Engine, but i am not able to see my created communication channels.
What could be happening?
Thanks!!
Regards
Javier Sahagun

Krishna, thanks for you response
I refreshed the SLD cache and CPACache. Before doing that, I saw other communication channels but not mine; after executing this operation, it didn't show to me any SOAP adapter.
Also I have read the note and we have made the steps that it indicates, but not yet it has been solved; Is immediate or we must wait for a time so that it makes effect? That another solution we can investigate?
Thanks

RWB- adapter monitoring - IDOC missing ?

Hi, I can not see IDOC adapter in adapter monitoring(RWB). when I tried to execute my scenario(File to Idoc), I got the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>MI_Cremas_IA</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface MI_Cremas_IA</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
1. How do i check if IDOC adapter is running ok or not?
2. I am sure IDOC adapter is installed as I can see adapter metadata objects under http://sap.com/xi/XI/System of SAP BASIS swcv in IR. What configuration I need to do to make IDOC adapter appear in adapter monitoring(RWB) ?
3.Is above error due to problem with interface determination or receiver determination ?
Please help.

Hi,
1. File to File works fine. I just tested this.
2. File to File using BPM works fine. I just tested this.
3. File to IDOC is failing with the following error message. I have checked port and RFC destination in XI server which are working fine.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>MI_Cremas_IA</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface MI_Cremas_IA</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Does this due to any authorizations error ? Please help.
I have tested the configuration in ID which looks good except a message(sender agreement not found).
SXI_CACHE is upto date.
CPA cache refreshed successfully.
SAI_CACHE_RERESH report failed with cx_ai_cache_xms exception. How to fix this. Not sure if this is causing any cache problem.

Adapter Monitoring in RWB

Hi-
I am having a IDOC to File scenario, The scenario was working fine but all of a sudden i am unable to send the File out,i don't see any errors in the Monitor.But the file is not present in the file system.So i went to RWB and clicked on adapter monitoring.I see all the adapter greyed out except the JPR and Xi adapter.JPR is in RED with a message.
SLD host:port = homexi18:50000
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for XI3.SystemHome.homexi18 found
No access to get JPR configuration
What should i do?? is there something i should restart?
Thanks
Venkat

HI Venkat,
Can you check the File Adapter status ? Is it in Grey color ? If so , is this adapter is active in ID ?
1) Try to change something in the File Adapter and activate it . And check the Adapter monitoring for the status..
Are you able to see the messages in Message Display Tool(MDT)
i.e RWB->Message Monitoring->MDT->Audit Log
If you have still problem, then check the Adapter engine Cache etc.. Refresh the cache in SXI_CACHE for the Adapter Engine.
Check the Adapter Metadata in the SAP BASIS Component in the IR..
For more-
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps,
Regards,
Moorthy

Adapter monitoring with central SLD!

Hi ,
we have central SLD in our landscape(different host from XI server),and our basis guys installed PI7.0 SP12.And AE is local as I can see under Integration server.
I can see JPR in adapter in adapter monitoring.
I have question here!
should it needs to show all the list of adapters (FILE,JDBC,JMS,SOAP etc)in adapter monitoring in RWB?does it vary,if sld is central or local ?
what is the ideal way.
thank you,
babu

where the adapter engine should appear in RWB under integration server or under non central adapter engine if we have installed central AE and central SLD?
Under Component monitoring -> Integration server -> Adapter Engine
and it has show all the adapters when we install central AE and with central SLD when we furthur click the show all adapters?
As i mentioned above, u may view all the adapters after clicking
Adapter Engine -> Adapter Monitoring
or is it changed since PI 7.0 to cummunication channel monitoring and no adapter monitoring?
Yes. Now the monitoring of adapters r much intensively done by Communication Channel Monitoring
Regards,
Prateek

Communication channels not shown in adapter monitoring

Hello everybody,
we got several communication channels running on the same file-adapter.
But in adapter monitoring only ONE communication channels is shown.
The other communication channels are not shown although we expected them at least with an error.
Any ideas?
Thanks a lot
Regards Mario

Hi,
I think, you have chosen the selection criteria only for the Correct one in the Page.. Check with All information in adapter monitoring screen.
Following will be looked once you don't have any adapters are visible..
Check SAP BASIS Content is imported in the IR or not.
Check this thread also-
Problems in adapter monitoring
Regards,
Moorthy
Message was edited by: Krishna Moorthy P
Message was edited by: Krishna Moorthy P

HI in production system RWB adapter monitoring

HI in production system RWB adapter monitoring , i am using FILE and RFC , but i am not able to see the Adapter monitoring any thing the both are in grey colour ,
please help me in that
sridhar

Hi,
Can you please tell me your XI SP.?.
bcoz.. in New SP version..
We have to see in the following link for channel monitoring and adapterframework
http://host:port/mdt/monitorservlet?objectName=type=XIAdapterFramework
OR
http://host:port/mdt/channelmonitorservlet..
If solved .. points rewarded please..
Regards
Chilla..

Cannot display Adapter Service in Adapter Monitor - XI Runtime Workbench

Dear Experts,
I have already done the system copy XI 3.0 from Win Server 2003 32bit to WIn Server 2003 64bit.
I have also done the post activities in NW AS ABAP system copy and NW AS JAVA system copy.
I have a problem now,
I cannot display the adapter service in SAP XI Runtime Workbench ( http://jktbtr-sap01:50000/rwb/index.jsp )
Tree Domain -> Integration Server -> Adapter Engine jktbtr-sap01
Button Adapter Monitoring.
In the previous source system I can see all the adapter service : BC, File, JDBC, JMS, JPR, Mail , RFC, SOAP, XI.
But in the target system, I just found JPR with red light.
What configuration should I set to register and start those adapter services in target system?
Regards,
Adhi

can u check whether u are able to see the list of adapters in communication channel. when u select the adapters.
also do the CPACACHE refresh.
chirag

ON RWB - CC Monitoring - SOAP Channel. status says "inactive or unregister

Hi,
I am working on SOAP Webservices.
My Scenario is working fine ... But Some How on RWB - CC Monitoring - SOAP Channel. status says "inactive or unregistered".
On the otherside , my SOAP Scenario is working fine...
But why for that status " "inactive or unregistered"." , I dont Know?
Please Suggest, How to Deal with this ........?
I executed transaction code " se38 - > SRT_ADMIN_CHECK report "
It states me almost every thing unregistered/ inactive/ not configured except ICM Services ..
are these services shoud active and registered for SOAP Scenario?
how to activate them .............????????
That CC status " "inactive or unregistered" has anything to do with this SRT_ADMIN_CHECK report????
Regards
Prabhat Sharma.

Hi
This is the problem which i recently faced and solved.
Cause: Saop related J2EE application are stoped or not set to default start as initial state.This is also a reason
 for 503 service unavailable error while soap posting.
Solution : start the J2EE app , com.sap.aii.adapter.soap.app & com.sap.aii.adapter.soap.lib set them as defualt started
 as initial state.
Where : If you are in PI 7.1 , http:<host>:<port>/nwa->Operations Management -> Systems -> Start & Stop -> Java EE
 Applications.
 Refer http://wiki.sdn.sap.com/wiki/display/XI/start_stop_applications for more help.
 Also in Start button , there will be a dropdown where you can set the default initial state as started.Simply starting may
 cause similar problem ( not registered ????????) again ,so better to set initial as started state.
Regards,
$rinivas

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

Adapter monitoring: SOAP is grey although it is used?

Similar Messages

Maybe you are looking for