On what Transaction Type the code can be reliable

Hi
I am using JPA for doing CRUD Operations for my spatial Data
Please tell me if i get any advantage if i using EJB Container Manged Transaction suppourt as
TransactionAttribute(Required)
for my insert and update operations .
rather than going for EntityTransaction Suppourt as
EntityTransaction etr = EntityManager.getTransaction();
etr.begin();
etr.commit();

The iPhone supports the following audio & video files:
Audio formats supported: AAC, Protected AAC, MP3, MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV
Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
To get the files onto the iPhone just add them to your iTunes library. From there you can copy them over to the iPhone.

Similar Messages

  • What are all the objects can be imported  and exported...

    Hi all,
    what are all the objects can be imported ..
    and what are all objects exported....in XI..
    and what is context objects and logical routing..
    Cheers,
    Raghavesh

    Hi,
    Your question 1 is not very clear. Are you taking about Export and Import under TOOLS --> EXPORT / IMPORT? If yes, all objects created in the IR and ID can be exported and improted. They are used for moving your objects from one environement to another .TPZ files.
    Individual Objects that can be improted in the IR  are those that come under
    1. External Definitions --> XSD, WSDL, DTD which acts
    as the message types.
    2. Idocs and RFC's.
    3. Imported Archives -->External Mapping progrars ( Java and XSLT ) , external .jar files etc.
    Context objects is nothing but to put in simple words an XPATH. At times XPATH can become too long and complex and to avoid typing them at different places, you create CONTEXT Objects for these path and then use them.
    Logical Routing refers to Conditional Receievr / Interface Determination where on the basis on some conditoon your target Recievr / Interface is determined.
    Regards,
    Bhavesh

  • Alert: WebServices connectivity (Internal) transaction failure - The credentials can't be used to test Web Services.

    Hi.
    Could you please help me to resolve this issue.
    I have SCOM 2012 installed to monitor environment with Exchnage 2010 SP3. There are 2 sites with Exchnage servers within the organization. There are 2 mailboxes being created to test both sites.
    I am getting following alert:
    Alert: WebServices connectivity (Internal) transaction failure - The credentials can't be used to test Web Services.
    description: The test mailbox was not initialized. Run new-TestCasConnectivityUser.ps1 to ensure that the test mailbox is created.
    Detailed information: 
    [Microsoft.Exchange.Monitoring.CasHealthUserNotFoundException]: The user wasn't found in Active Directory. UserPrincipalName: extest*****@****.local. Additional error information: [System.Security.SecurityException]:
    Logon failure: unknown user name or bad password.
    Diagnostic command: "Test-WebServicesConnectivity -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true"
    EventSourceName: MSExchange Monitoring WebServicesConnectivity Internal
    I have tried the next steps:
    1. Verified that mailbox is exist and it's not locked (same for the second mailbox)
    2. Deleted those mailboxes and created  a new  using new-TestCasConnectivityUser.ps1  verified that this mailbox is visible on all DC's accross the forest (both mailboxes)
    and that temporary password was accepted;
    3. Cleared the cache on the SCOM 2012;
    4. Still getting the same alert
    I will really appriciate any help.
    Thanks.

    Hi,
    Hope these posts help you:
    http://thoughtsonopsmgr.blogspot.ca/2013/11/exchange-server-2010-mp-no-synthetic.html
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/437f2bbb-cd96-40c3-8c56-6d4d176a9520/exchange-2010-mp-constantly-throws-webservices-connectivity-internal-transaction-failure?forum=operationsmanagermgmtpacks
    Natalya
    ### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

  • I have an iMac 24" EMC 2111 intel core 2 duo running OX lion and would like to set up a first gen Apple wireless keyboard. It has been discovered but won't let me type the code. What am I doing wrong?

    I cant set up my older wireless keyboard with my iMac. The Apple site shows this keyboard model as needing a USB keyboard and mouse for initial set up, but I dont know how to do that. Blue tooth finds the keyboard, yet when I need to type the passcode, nothing happens. the keys wont function. What am I doing wrong? Thanks

    I cant set up my older wireless keyboard with my iMac. The Apple site shows this keyboard model as needing a USB keyboard and mouse for initial set up, but I dont know how to do that. Blue tooth finds the keyboard, yet when I need to type the passcode, nothing happens. the keys wont function. What am I doing wrong? Thanks

  • What happened to the code reference panel from CS5?

    I have been watching a CS5 Flash ActionScript tutorial, but I am using Flash CC. In the tutorial, there is a code reference panel to the left of the actions panel that has a list of all the possible code pieces, and when hovering over any of them, it shows a tooltip describing the code piece. Did they remove this panel in later versions of Flash, and if so, is there any way to bring it back? It would be extremely useful as a tool to learn ActionScript.
    The following is a picture to show what I am referring to.

    There's a chance you might find it in the exchange but I believe ultimately the packaged documentation is no longer the desired route to obtain help.
    If you hit Help->Flash Help you'll be instantly directed online. I think that shows you that they want you to view the most up to date documentation for the product possible.
    While the methods/properties/etc are missing from the left menu, you can always contextually see them by default when you type a period next to an objects name. If I make a Sprite and type the name followed by a period I am greeted by a contextually specific list of properties and methods for the object I'm referring to:
    If I don't know what the property or method does, I can accept it, select it and hit F1 to be taken directly to the documentation for it:
    This shows the emphasis on using the online documentation.
    If you haven't already, check out these resources for learning ActionScript:
    http://tv.adobe.com/videos/actionscript/
    http://www.adobe.com/devnet/actionscript/learning.html

  • HT201365 I updated my software Wide. The update completed but when I wanted to open the device access code is required, I typed in the code can be wrong then the device is locked . at pelefon .said the solution is to delete everything on the

    I updated my softwarew in my iphone. The update completed but when I wanted to open the device, access code is required, I typed . the code, it can be wrong i try again but then the device is locked. at pelephone corporetion  said the solution is to delete everything on the device and
    . Reinstall the software
    . Is there no other solution' may be i can cancel  the code

    You can only add music to iTunes Match from your iTunes library on your computer, not from your iOS device.  If you have music on your iPad that is not on your computer, you'll have to import it to your iTunes library on your computer to add it to iTunes Match. 
    Music purchased from the iTunes store can be imported directly to your iTunes library by authorizing your computer for the Apple ID(s) used to purchase the music (in Store>Authorize This Computer), then connecting the iPad to your computer, opening iTunes and going to File>Devices>Transfer Purchases.  Music from other sources will require using 3rd party software to transfer to your computer, such as Touch Copy.

  • What would be the code for a previous button?

    I am passing Strings from an array to JTextArea. When I hit the "next" button on my jtoolbar, it shows the next string in the array. This is the code I have for the next button:
    static final public String NEXT = "next";
    String cmd = e.getActionCommand();
    String[] arr =
    "the strings",
    "that i am",
    "passing to JTextArea"
    if(NEXT.equals(cmd)
    showNextValue();
    public void showNextValue()
    textArea.setText(arr[index]);
    index = (index+1)%arr.length;
    My question is:
    how would I write the code for the method showPreviousValue() without getting an indexoutofbounds exception? It would do the same thing as showNextValue, but show the user the previous string when they hit the previous button.
    Thank you!!!

    how would I write the code for the method showPreviousValue() without getting an indexoutofbounds exception?I'm guessing that you tried something and got an IndexOutOfBounds exception. You might do better to post what you tried.
    Basically you need to figure out why the exception occurs - for instance by printing the value of the expression that you were using as the index value. And then figure out some way of avoiding that problem. (Probably a little bit of arithmetic.)

  • I have purchased a app store card a scratched the code and two of the numbers have come off. Under the scratchy how do i retrieve the code can any one help kn i contact anyone

    I have purchased a app store gift card and scratched the code off and two of the numbers to the code came off under the sticky thing is there any way of retrieving this cade so i can use it please an soneone please help

    Hi,
    Here is a Support Article that will help:
    http://support.apple.com/kb/HT6021
    Cheers,
    GB

  • TS1292 I got a gift card for my friend but when he types the code it says invalid he's entered it correctly and we can't figure out why it won't redeem

    I got an iTunes card for a friend but when he goes to redeem it it says invalid

    The javadoc of createImage() states that "The return value may be null if the component is not displayable."
    Not sure, but it may be that you need to call init() after this.setVisible(true).

  • Whats wrong with the code?????

    Hi All
    Pls can anyone help me, what is wrong with the below code, when ever i tried giving 10 digit number to chk out whether it is prime or not it is giving an NumberFormatException to me, pls can anyone help me...
    class PrimeNo{
    public static void main(String args[])
    int a = Integer.parseInt(args[0]);
    int count=0;
    for(int i=2;i<a;i++){
    if(a%i==0)
    System.out.println(a+" is not a Prime Number");
    count = 1;
    break;
    if(count==0)
    System.out.println(a+" is a Prime Number");
    Thnx and rgrds
    Badri

    Just curious, since this has already been answered, but to simplify code, would it be possible to set it so that if the value is not a prime number, just do the value like so:
    if (//code determines it is prime)
    System.out.println ("prime number");
    else
    prime = !prime;
    if(!prime)
    System.out.println ("not a prime number");not really code there, more pseudocode, but you get my drift. Would this make sense to do?

  • Where in the Code can I Call a function Before Insert

    Hi, using DWMX and VBSCRIPT with n MS Access table set on a
    W2k3 server and ASP
    I need to insert a value 'intGradID' from a function into a
    hidden field 'hGradID' when the submit button (to insert a record
    in an access database) is clicked (and before insert takes place as
    this is the key field that I am adding).
    I realise Javascript might be required (not too great with
    Java) so any help please tell me where to put script/code and what
    to put. Thanks.

    Why not just setup the field in the record to be
    auto-incrementing? That way
    on insert the next # in the series is assigned to the new
    record. And even
    if 2 people someone did it at exactly the same time, the
    server takes care
    of the collision.
    "Dave(UK)" <[email protected]> wrote in
    message
    news:e9uakp$s11$[email protected]..
    > Hi, using DWMX and VBSCRIPT on a W2k3 server and ASP
    >
    > I have an on-line application form for Graduates (bound
    to Insert Into a
    > table
    > called graduates). On open of the page (at the top) I
    have some some code
    > to go
    > look in the Graduates table for the last gradID No and
    add 1 for this new
    > Graduate and I set a session variab;e with the GradID
    found and that value
    > is
    > the 'Initial Value' of a hidden field hGradID which is
    inserted into
    > GradID in
    > the table on Submit, along with the other info. Works
    Perfectly!! Until,
    > that
    > is, during the course of one Graduate registering,
    another tries to do so
    > ..
    > both get the same gradID and the one who submits last
    ends up with the
    > error
    > 'Dulicate in Key field '(ie GradID in the table). What I
    got to work was
    > to set
    > up another table (GradOn) into which at the end of the
    GradID+1 routine,
    > the
    > GradID was entered and when the form was submitted, it
    ran a routine to
    > delete
    > the contents of GradOn. Then if the form was opened
    again by another user,
    > the
    > first routine now was to check for a presence of a
    record (any record) in
    > the
    > GradOn Table - if a record existed, it redirected to a
    'Registration in
    > Progress - Please try later page' ... again all worked
    well, perfectly,
    > until
    > a. The user left the form open for hours
    > b. The user used the browser to wuit the page instead of
    the logoff which
    > ran
    > a routine to 'Delele * from GradOn'

  • HT1320 my i-pod has a code, and cant find the code.Can I Make a new code?

    LOST MY CODE FROM I-POD, HOW CAN I MAKE A NEW CODE?

    Connect it to the computer you sync with and Restore it in iTunes.

  • My touch ipod is locked and i can't remember the code can you restart the whole ipod

    need help to unlock my touch ipod i forgot my code

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad into Recovery Mode
    http://support.apple.com/kb/ht1808

  • When adding music other than what comes with the theme; can you choose a specific section of the music

    I have added a song to replace the Revolution's theme music.  Is ther a way to set a specific section of the song to play instead of the entire song?

    Not with iTunes.  If you want a specific part of a track you should edit a copy of the track with a 3rd party audio editor to leave just the portion you want.  Then import that clip into iTunes and use in iDVD.
    OT

  • New Write up transaction type which can post to Affiliated company

    Hi Gurus,
      Can you please help me with this request.
    I have been asked to create the New Write up transaction type which can post to Affiliated companies copy  of transaction type 700.
      But i dont see any such option (Posting type) in transaction AO78.
    Where as i can see the option in Transaction AO73( Acquisition) and AO68 (Retirement).
    Can you please guide me how can i create this transaction type if i can and the reason if i cant.
    Appreciate your time and early reply
    Regards

    OA81 is a general transaction. and AO78 specific for that kind of transaction types.
    I think these field are hidden in  AO78 for the reason that you can't use Affiliated company.
    I never have seen a screen with Write up that you can fill in an Affiliated company.
    For me this have only sense for postings between company code's.
    You can tray to change the values by using the debugger, but it can give nice other effectslike that it is no longer possible to run the depreciation run when you have used this transaction type. Or it is working now but never again after an upgrade. There is a reason that you can't use these fields.

Maybe you are looking for