Once again: frm-41213

Hi,
I am currently trying to migrate forms from 6i to 10g (9.x). The form runs fine on the web. Now I have changed the code to call a report from within the form according to the example in the "Migrating Forms Applications from Forms 6i".
Unfortunately I get an 41213 error when I try to start the report from within the form (running the report directly on the report server works).
The call
vc_rep_status := REPORT_OBJECT_STATUS(vc_report_job_id);
produces the error message.
I have already commented out the <security> tag in the .conf file (with a restart).
Do I also have to change some properties in the rwservlet.properties file?
What could I try to track down the problem?
Stefan

I have to correct myself: The call
vc_report_job_id:=RUN_REPORT_OBJECT(v_report_id);
produces the error message (the previously given call does that too but since it depends on run_report_object that is no big surprise...)

Similar Messages

Again FRM-41213: Unable to connect to Report Server

Hi all
I've been fighting with this problem a week, but I can not understand why my form, which works fine in the Oracle DS Report Server, can not run the report in the Oracle AS.
I'm using the Oracle AS 10g. All forms and reports are done in the DS 10g too. All testing stuff I've made at once:
1. rwclient works good
2. rwservlet works too
3. SSL is switched off
The report server, which I use is in-proc sservice (installed during the installation of AS). I did not make any other service of reports - I think it must work too.
I've made such code:
PROCEDURE RUN_REPORT(pReportParams Report_Params_Type)
AS
lParamList ParamList;
lReport REPORT_OBJECT;
lReturn VARCHAR2(100);
lRepServer VARCHAR2(100);
lHost VARCHAR2(20);
lPort VARCHAR2(6);
lURLStr VARCHAR2(100);
lStatus VARCHAR2(100);
ljobID VARCHAR2(100);
BEGIN
     lReport := FIND_REPORT_OBJECT(pReportParams.ReportName);
     TOOL_ENV.GETVAR('REPORTSERVERNAME', lRepServer);
     IF TRIM(lRepServer) IS NULL THEN
          SHOW_ERROR_MESSAGE('Report server name is not defined in the .env file');
     ELSE
          lRepServer := TRIM(lRepServer);
     END IF;
     TOOL_ENV.GETVAR('HOSTNAME', lHost);
     IF TRIM(lHost) IS NULL THEN
          SHOW_ERROR_MESSAGE('Report server host is not defined in the .env file');
     END IF;
TOOL_ENV.GETVAR('REPORTSERVERPORT', lPort);
     /*IF TRIM(lPort) IS NULL THEN
          SHOW_ERROR_MESSAGE('Report server port is not defined in the .env file');
     END IF;     */
     IF ID_NULL(lReport) THEN
          Show_Error_Message('Report '||pReportParams.ReportName||' is not found');
     END IF;
     lParamList := GET_PARAMETER_LIST('REPORT_PARAMS');
     IF NOT ID_NULL(lParamList) THEN
          DESTROY_PARAMETER_LIST(lParamList);
     END IF;
     lParamList := CREATE_PARAMETER_LIST('REPORT_PARAMS');
SET_REPORT_OBJECT_PROPERTY(lReport, REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(lReport, REPORT_COMM_MODE, ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(lReport, REPORT_DESTYPE, CACHE); --cache/printer
SET_REPORT_OBJECT_PROPERTY(lReport, REPORT_DESFORMAT, pReportParams.Format);
SET_REPORT_OBJECT_PROPERTY(lReport, REPORT_SERVER, lRepServer);
lReturn := RUN_REPORT_OBJECT(lReport, lParamList);
ljobID := SUBSTR(lReturn, LENGTH(lRepServer) + 2, LENGTH(lReturn));
IF ljobID IS NOT NULL THEN
lStatus := REPORT_OBJECT_STATUS(lReturn);
WHILE lStatus in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
lStatus := REPORT_OBJECT_STATUS(lReturn);
END LOOP;
IF lStatus = 'FINISHED' THEN
     IF TRIM(lPort) IS NOT NULL THEN
lURLStr := 'http://'||lHost||':'||lPort||'/reports/rwservlet/getjobid'||ljobID||'?server='||lRepServer;
     ELSE
          lURLStr := 'http://'||lHost||'/reports/rwservlet/getjobid'||ljobID||'?server='||lRepServer;
     END IF;
     SHOW_INFO_MESSAGE(lURLStr);
WEB.SHOW_DOCUMENT(lURLStr, '_blank');
ELSE
Message('Report can not be run with status '|| lStatus);
END IF;
END IF;
DESTROY_PARAMETER_LIST(lParamList);
END;
END;
The parameters: REPORTSERVERNAME, HOSTNAME, REPORTSERVERPORT are decribed in the env file. the name of the server is defined correctly.
I noticed that the procedure
lReturn := RUN_REPORT_OBJECT(lReport, lParamList);
returns <server_name_0>. In the result, the job=0 - I think the forms service can not access to the report service, but I can not understand why.
Could anyone help me?
Thanks in advance

1) pls make sure inproc server is up
inproc server is hosted in oc4_bi_forms j2ee container. so oc4j_bi_forms should also be up
give
http://host:port/reports/rwservlet/getserverinfo?server=server_name
and you can see status of server. (or you can in oracle enterprise manager)
You can also see status of submitted jobs using
http://host:port/reports/rwservlet/showjobs?server=server_name
2) any reports servlet command will automatically start inproc server.
but submitting a request thru run_report_object will not make it start automatically
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

FRM-41213 message will come up the first time

When users run reports in Oracle Forms from time to time, particularly after the report server engine (InitEng=1, minEng=1, maxEng=2) has been idle for a while, the FRM-41213 message will come up the first time. Then, the second time (or after that) when users try to run reports again reports come up.
It looks like, after certain idle time, all existing report server engines are killed automatically. Then, the very first call to the report server at that time will usually fail because it has exceeded the time limit to ping the report server when it is actually trying to start an engine.
Is this an issue with the server configuration? If so, is there any way to correct it?
Thanks.
Andy

The OAS version is actually 10.1.2.3 - latest patches applied to 10.1.2.0.2. The issue is actually intermittent and usually happens when there is a cold call to the report server from RUN_REPORT_OBJECT in Forms. When the first call fails, the second time (or after that) when the same report is called will always succeed. However, this failure pattern is consistent. I also tried to use "trcrro1012" to generate some trace files and got the following. Thanks.
<pre>
[Thu Oct 22 08:45:43 PDT 2009] Calling RUN_REPORT_OBJECT with REPORT_SERVER=apprs
com.sun.corba.se.internal.iiop.ConnectionTable(Thread[main,5,main]): Client get called: host = 10.10.10.10 port = 4526
com.sun.corba.se.internal.iiop.ConnectionTable(Thread[main,5,main]): SocketException java.net.ConnectException: Connection refused: connect while creating socket for new connection
com.sun.corba.se.internal.iiop.ConnectionTable(Thread[main,5,main]): Serious error: aborting connection
[Thu Oct 22 08:45:53 PDT 2009] RUN_REPORT_OBJECT returned : apprs_0
ERROR TYPE : FRM
ERROR CODE : 41213
ERROR TEXT : Unable to connect to the Report server apprs.
</pre>
Here is the configuration file:
<pre>
<?xml version = '1.0' encoding = 'ISO-8859-1'?>
<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\product\midtr1012/reports/dtd/rwserverconf.dtd">
<server version="10.1.2.0.2">


<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="100"/>



</cache>
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="2" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000">


</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="2" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000"/>


<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">

</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">

</destination>


<job jobType="report" engineId="rwEng" retry="3"/>
<job jobType="rwurl" engineId="rwURLEng" retry="3"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>

<log option="noJob"/>


<trace traceMode="trace_append" traceOpts="trace_all"/>
<connection maxConnect="20" idleTimeOut="20">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>


<identifier confidential="yes" encrypted="yes">ZgZCDkywAUaHwMnb+A6YTg0RUH18p+JnK5e6PYJzMHahoaXuaMlHLsLimJoUJC7SgRkIKvxUWzcN+fnGpAgXqPbDwQIip3iy1IVDD28qcMq341JDJJwkp3UHBmgF9iaHE1QT5Ax+oDOlbJDRu8UsVvWdEEYE+/I/eo4Lke/II/28sEGlHFJbQ39gtjMB9ULQcKnUVc8mNUTEEE+VoCCzboSmVB1Tlmw1WXrs5IPPTkiNwb6FeN+wSWv19mxKLJgUHzw3QXcGIM2h5dtO7SPlo5agERVicAVt83fWwrd5/1r7BJD/gsUS5tgob91faIqoDU8INtNWdbGJxiQJGKon/lGAqjkSIHbPVWiNUgcB4gNQtFZwFQ8BU9qQCpolnki9zj8NmkRZpqTeMsEDrj2EbJhrFg6UEnrxrgKy1vCYf0bhPyZks/mY94nW4tSekTnqUW5gFVgUe0Ms0WiPx0o=</identifier>
<pluginParam name="mailServer">dphhub01.sfgov.org</pluginParam>

<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
</pre>

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

MDT 2012 deploy OS from USB external drive failed - need to unplug and plug it once again

We are using MDT 2012 and deploying Windows 7 using media (USB external hard drive). We can successfully deploy Windows 7 32 bit using this method but there is a problem with deploying Windows 7 64bit. This problem appears only on HP EliteBook 840. We can
boot into WinPE 64 bit and can start proper task sequence, all image is applied then after restart, before logon screen appears there is an error saying that cannot find litetouch.vbs script. After clicking ok, I can logon to Windows and there is no usb external
drive recognized. But when I unplug and plug usb drive once again it is recognized by Windows and can be used. I can see that Windows install some drivers just after plug it again
I checked BIOS looking for some USB power options - there is no such settings. And 32 bit deployment works ok. So this is not a case. Looks for me like a problem with proper usb drivers for 64 bit. I download all drivers from HP website (driver pack and
drivers only for USB 3.0). We are using make and model matching in MDT - works ok for all the rest hardware models. Any idea how to troubleshoot it?

Not sure what's going on here. Is this a USB "Flash" drive or a USB "Hard Drive". There *Is* a distinction.
I *thought* that MDT would copy itself to the c:\minint\scripts folder to continue installation.
Next time, when you see this error, Press Shift-F10 to get into a cmd.exe prompt. Can you find litetouch.vbs on any of the drives? Does the USB Drive appear?
IF in fact, the USB Drive is not appearing after the 1st reboot, then you have a problem. Why did the USB 3.0 driver not install. Check the Driver Installation Logs to verify.
Keith Garner - keithga.wordpress.com

Report is not getting refreshed after changing prompts once again?

HI,
I am running some webi and deski reports using webi sdk also i'm handling the prompts of
report.
Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
then i fill all the prompt for the report it shows the data for selected prompt values.
But if i once again changed prompt values it shows data of previously selected prompt values not for
the currently changed prompt values. means reports not getting refreshed.
sometimes its work correctly.
What will be problem?
How can i resolve this issues?
Please help me
Thanks in advance
Harshad

The workflow is:
1. Refresh
2. Set Prompts
3. Get View.
then repeat.
Are you refreshing before setting prompts?
Sincerely,
Ted Ueda

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install. It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer.
I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process. I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software. I also scanned the downloaded zip with two virus scanners and both said it was clean. Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
https://www.youtube.com/watch?v=vlT0N2CX50g

I tried upgrading to MountaIN lION HOWEVER i WASNT ABLE TO Install. I then tried reinstallling Snow leopard but once again it will not let me install stating there are errors on the disc. I have run disc repair on disc utility but it wont allow me

I was told to reinstall Snow leopard which I did . More troubles! It then came up cannot iinstall as there are errors. Tried going into disc utilities and repair but once again it stated iin red I cannot proceed. can anyone help me here. Before this was happening my system was slowing right down with the beach ball making an apearance after tapping the mouse or typing text.

So you are trying to reinstall Snow Leopard?
In order to do that, you need to erase your hard drive - you cannot go back to an earlier system without erasing. Make sure you back up your files first. Then insert the Snow Leopard install disk, and restart while holding down the C key. If that does not work, insert the install disk, go to System Preferences > Startup Disk and highlight the install disk > click on restart.
Once you are booted into the install disk, go past the language selection and then to Utilities in the menu bar. Use Disk Utility to repair the drive (just in case), erase it and then install. After that, eject the disk and update to the latest 10.6.8.

Error calling report FRM-41213 unable to connect to Report Server

Hi,
I have installed Oracle Database 10g R2 and Oracle Developer 10gR2.
I installed it in both Windows 2000 SP4 and Windows XP SP2.
I would like to call a Report using a button inside Oracle Form.
I create my own Report Server, using : rwserver server=repsrv
A Java-based window appear OracleAS Reports Sevice, and showed that repsrv is ready.
In Form (inside a button -> WHEN-BUTTON-PRESSED) :
1. Using RUN_REPORT_OBJECT()
   rep_id := find_report_object('REPORT10');
     if not id_null(rep_id) then
       v_rep := run_report_object(rep_id);
     else
          message('Null');
   end if;
   a. If I did not specify the name of the Report Server in Reports node of Form's property object
(I leave it blank)
The following error appear :
FRM-41211: Integration error, SSL failure running another product
b. If I specify the name of the Report Server : repsrv
The following error appear :
FRM-41213: Unable to connect to Reports Server repsrv
2. Using WEB.SHOW_DOCUMENT()
a. If did not I specify the server name in the parameter
WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||,'_blank');Another web browser appear and the following error appear :
REP-51002: Bind to Reports Server rep_<computer_name> failed
b. If I specify the server name in the parameter --> server='repsrv'
WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||'server=repsrv','_blank');Another web browser appear and the following error appear :
REP-51002: Bind to Reports Server repsrv failed
In Report :
If I try to navigate manually to :
1. http://localhost:8889/reports/rwservlet using web browser.
It showed OracleAS Report Services - Servlet Command Help page.
2. http://localhost:8889/reports/rwservlet?userid=scott/tiger@orcl&report=D:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
The following error occured
REP-51002: Bind to Reports Server rep_<computer_name> failed
3. Finally,
http://localhost:8889/reports/rwservlet?server=REPSRV&userid=scott/tiger@orcl&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
The following error occured
REP-51002: Bind to Reports Server repsrv failed
4. Any attempt to different command (i.e showenv, showjobs, etc) seems failed
If I did not specify the server then REP-51002: Bind to Reports Server rep_<computer_name> failed
If I specify the server - 'repsrv' then REP-51002: Bind to Reports Server repsrv failed
5. I have tried to use rwrun in command line.
rwrun report="D:\My Documents\form\module1.jsp" userid=scott/tiger@orcl destype=file desformat=pdf desname="D:\My Documents\form\module2.pdf"
The PDF file created and it looks exactly as the web layout as in Oracle Report Builder (Run Web Layout CTRL-R)
Question :
1. What supposed to be done?
The Report server is ready, but the web browser seems unable to connect to Report Server.
2. Can we used or call or executed an executable command line from Form (using PL/SQL inside button)?
Any help would be grateful.
Many thanks,
Buntoro

Hi,
Problem solved.
I got the solution from another post.
Re: REP-51002: Bind to Reports Server rep failed
Here are the step I did.
Note : Please make backup for the following file : rwnetwork.conf
- In file rwnetwork.conf, remove or commented the following
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
- And then uncommented
<namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
- replace the
%NAMING_HOST% with your computer name or specify an IP address
%NAMING_PORT% with 14021
It should look like this :
<namingService name="Cos" host="blahblah" port="14021"/>
- I did not change the : name="Cos", since I do not understand what does it for
- Save you changes.
- Start the OC4J.
- Find the location of : namingservice.bat (on Windows platform)
- execute in the command line : namingservice.bat 14021
- finally start the report in the web browser
Note:
To shutdown the namingservice, use : namingservice.bat 14021 shutdown
Regards.
Buntoro

How can I buy it on my Apple ID so I can use Recovery to put my MBP to function once again? Help D=

My MBP just failed, bought it from a friend and dont have an Apple ID with Lion, Lion is no longer on the App Store so, how can I buy it on my Apple ID so I can use Recovery to put my MBP to function once again? Help D=
Or what else could I do? I don´t have any USB to reinstall the OS and my DVD Unit is death, but it seems I can reinstall over Wi-Fi if Im able to link an OS X Lion license to my Apple ID

You would need to call Apple Sales (USA 1-800-MY-APPLE) and purchase a redemption code for Lion.

If I am browsing on site such as Ebay or any shopping site, and click on an item, when I return to the search page I am once again at the top of the page and have to search down for where I was in the list of items.

If I am browsing on site such as Ebay or any shopping site and click on an item, when I return to the search page I am once again at the top of the page and have to search down for where I was in the list of items. This is not only on Ebay it is everywhere I search. Firefox goes back to the top of the page . It is annoying to have to figure out exactly where I was if I left the page and then returned. This is a hinderance when using Firefox. I have considered uninstalling it because of the inconvenience of 're-searching' after already doing a search. Firefox used to take me right back to where I was if I left a page, but that feature is not working now. I am not sure how to change this in the settings.

Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

FRM-41213 : Error raised by a form when launching report on the same server

Hello !
I get this error FRM-41213 when launching a report via rp2rro.rp2rro_run_product.
I don't want to set the report server in a var or property into a library or a form cause my app is to be sent to customers who will not have the sources files.
This app is a migration from an app 10g to 11g.
In 10g whe hadn't to set the ReportServerURL ... But in 11g it can't be ok if we don't set the server URL (with the URL it's ok)
The 11g Report server is running on port 9002, and the form server on port 9001 on the same machine. But the two server are accessible by an ohs on port 8888.
What the f**k ?
:)

Hi
I don't run my reports using rp2rro.rp2rro_run_product but in both 10g and in 11g have always needed to specify the name of the report server.
We have used different methods for different clients/customers. At times we have stored this name in a table in the application, other times in a pre-defined file on the server which we read using text_io.
HTH
Tony

FRM-41213 When calling report from a form using RUN_REPORT_OBJECT

Hi,
I get an error frm-41214:unable to connect to the report server when i am trying to call a report from a form using RUN_REPORT_OBJECT.
My code is as follows:
I have created a simple report using employee table such tht when i give the department number as parameter it should get the corresponding details along with that i also have highlited the system parameters:
DESFORMAT
DESNAME
DESTYPE
also other user parameters as
p_action
p_servername
p_user_connect
and in the before parameter form trigger the following code:
function BeforePForm return boolean is
vc_parameter_form VARCHAR2(4000);
vc_hidden_runtime_values VARCHAR2(1000);
vc_report_name VARCHAR2(100);
begin
IF (:P_ACTION = '_action_') THEN
     vc_hidden_runtime_values := '_hidden_';
ELSE
     srw.get_report_name(vc_report_name);
          vc_hidden_runtime_values:='report='||vc_report_name||'&destype='||:destype||'&desformat='
||:desformat||'&userid='||:p_user_connect||'&server='||:p_servername;
END IF;
vc_parameter_form:='<html><body bgcolor="#ffffff"><form method=post action="'
||:P_ACTION||'">'||'<input name="hidden_run_parameters" type=hidden value="'
||vc_hidden_runtime_values||'">'||'<center><p><table border=0 cellspacing=0 cellpadding=0><tr><td>'
||'<input type=submit></td><td width=15><td><input type=reset></td>'||'</tr></table><p><hr><p>';
                    srw.set_before_form_html(srw.text_escape,vc_parameter_form);
return (TRUE);
end;
After this i created a form with department table as my datablock:
I created a report object in the form with name REPORT6.
-Created a procedure in the form with the following code
PROCEDURE RUN_REPORT_OBJECT_PROC(report_id REPORT_OBJECT,reportserver VARCHAR2,runformat VARCHAR2) IS
report_message VARCHAR2(100);
rep_status VARCHAR2(100);
vc_user_name VARCHAR2(100);
vc_user_password VARCHAR2(100);
vc_user_connect VARCHAR2(100);
vc_connect VARCHAR2(300);
BEGIN
vc_user_name:=get_application_property(username);
vc_user_password:=get_application_property(password);
vc_user_connect:=get_application_property(connect_string);
vc_connect:=vc_user_name||'/'||vc_user_password||'@'||vc_user_connect;
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,runformat);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,reportserver);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'p_deptno='
||:Dept.Deptno
||' paramform=yes P_USER_CONNECT='
||vc_connect||' P_SERVERNAME='||reportserver
||' P_ACTION=http://iitv-1:8888/reports/rwservlet?');
report_message:=run_report_object(report_id);
rep_status := report_object_status(report_message);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
rep_status := report_object_status(report_message);
END LOOP /* Wait for Report to be finished */;
IF rep_status='FINISHED' then
web.show_document('http://iitv-1:8888/reports/rwservlet/getjobid'||
substr(report_message,instr(report_message,'_',-1)+1)||'?server'
||reportserver,'_blank');
ELSE
message (rep_status||' Report output aborted');
END IF;
END;
I created a press button and in the when_button_pressed trigger i added the following code:
declare
     repid REPORT_OBJECT;
     repserver VARCHAR2(100);
     runformat VARCHAR2(10);
BEGIN
     repid := find_report_object('REPORT6');
     repserver := 'rep_iitv-1';
     runformat := 'HTML';
     run_report_object_proc(repid,repserver,runformat);
     END;
Then tried to run the form but i got this error frm-41213 unable to connect to the report server.
Any one please help me.

Run_report_object can't work with forms9i
Regards
Vikas Singhal

Once again, I need help...I'm starting to hate this board

Ok, I'm going to start from the beginning. When I first built this computer last year, (specs at the bottom) everything ran seemlessly. I upgraded to WinXP and no problems. Then my hardrive started screwing up around mid-summertime. The computer would freeze, crash, ect. Various things. After doing some research, running diagnostics and calling IBM, it was decided that the drive had gone bad. So I took it out, and bought a new western digital. After installation of the drive, and installing XP on the newly formatted drive, I expected everything to work fine. It didn't. First, there were blue and black screens of death. Sometimes the blue screens would mention something about IRQ's not less or equal, sometimes something else. Sometimes the computer would just restart for no reason. So I reformatted again. This fixed the blue screen problem and for about a day, everything (I thought) was cool. Think again. To start, I couldn't run any 3d application for an extended period of time without it freezing. And if I set the CPU to 1.2 ghz (where it should be!) it gets even worse. I even tried uping the voltage a little. No help. Sometimes the computer would just (once again) restart for no reason. Especially while using winamp. I tried different drivers, different bioses, readjusting my fan on my cpu, running memtest86 (which showed the memory to be fine). I have read through MANY threads on the forums and tried many other things, with no luck. The current situation, after attempting to install WinXP servicepack 1 is that I cant even load Windows. It always gets to the point where the blue bar is moving across while it says WinXP, and then the computer restarts. I ran tests to check how the powersupply was running during use, nd all the numbers looked good. The thing that really pisses me off, is that everything use to work fine, before the IBM drive crashed. Guys, I need some expertise and a Beer. I can do the second one myself and will gladly get a case for whoever can help me straighten this out! Even if I just have some part that needs replaced, I just need answers! Thanks guys!
Athlon 1.2 ghz 266fsb
Msi nforce k7n420pro
300W powersupply
Integrated graphics
256 mb Crucial memory
yamaha 24x burner
kenwood 52x cdrom
floppy drive
d-link wireless network card (could this be a problem? I was having problems before I got this card)

All these guys with there power supply is a bunch of bunk and the combine this and that. a decent 300w psu will run the nforce with onboard vid or a geforce 3 easely. and forget all the combined crap.
Heres what my 300watt power could handle before I gave it to my kid.
MoBo.
1900xp
Geforce3
Scsi card
Modem
2- IBM 60 GB 7200rpm
Cold cathode ray tube 12"
CD ROM
Smart media reader
And whatever else I plugged into the usb port and the only time I ever had Maveric's problem, which I had the same thing was when switch system driver from 1.0 to 1.05 they gave me the same thing he is having. so I stayed with the 1.0 until the 1.13's came along and they worked well.
I suggest his is a driver issue IRQ not less then, Bksod or random restarts or other blue screen errors.
Try the 1.00's
Oh by the way now my kid uses my old 300watter on his 1900xp nforce machine, with all kind of toys and his is also stable. So Wonky and Athlonix quit suggesting that a 300psu is not sufficent when in fact it may work very well. oh and one more thing Athlonix GET OFF THE SOUND CARD THING!!! the onboard works, can't you get that in your head. Only yours doesn't every one elses does. can someone draw a picture of that
Jim.

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe

I guess I spoke too soon! I really can't believe this nightmare is not over yet! My account is still wrong. The credit that I was due totaled $63.00 I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72. I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible? None of the late fees were credited and the amount due for my monthly charges are wrong. Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20. The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money. I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change! I lost money once again due to the verizon rep's. so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account. Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end! I need real help!
>> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

Once again: frm-41213

Similar Messages

Maybe you are looking for