OnCommand Unified Manager 6.1 and 6.2 API's Documentation

One can use the APIs of OnCommand Unified Manager to develop third-party applications to monitor and manage NetApp storage systems. Also be used to manage and monitor storage systems by using the advanced functionality provided by the APIs of the applications included in the OnCommand Unified Manager server. The following table lists common management tasks and the corresponding API set that you can use:Tasks to be performedWhat to useStorage system health monitoringOnCommand APIsData protectionProtection capability APIsCommand-line tasks not covered by any other APIssh, rsh or telnet API classificationThis section provides guidelines on how to use the APIs for various operations related to the Unified Manager server and its components.The Unified Manager API’s are broadly classified into the following categories:Unified Manager APIsProtection capability APIsLaunch SDK_help.htm to get started with the OnCommand API Documentation.

Do you have the API documentation for OCUM 6.3 (which is in RC at the moment)?

Similar Messages

  • WFA 2.1+ CM Snapshot support with Unified Manager 6.0+

    Hi All,
    If you've come here, you may have noticed that WFA 2.1 appears to lack support of Snapshots in cDOT, and the Snapshot database view within OnCommand Unified Manager 6.0 and above is empty.
    This pack intends to fill that gap by providing a separate collector that uses the same list of clusters as the Unified Manager database collector, but goes directly to the cluster to gather Snapshot information. In future it may gather other information not available within a Unified Manager view.
    Updates included in v4:
    Includes Cluster and Vserver Peer information collections, dictionary, commands and filters.
    You can also connect directly to the cluster, no Unified Manager required!
    To connect directly to a cluster, specify a comma separated list of clusters to connect to, using their 'primary_address' as registered in OnCommand Unified Manager to ensure filters match the cluster.primary_address field.
    Here is an overview of the components in the attached.
    Schema: cm_storage_augment
    Dictionary:
    Snapshot          Represents a Volume Snapshot
    Vserver_Peer    Represents a Vserver Peer relationship
    Cluster_Peer     Represents a Cluster Peer relationship
    Commands:
    Create Volume Snapshot             Creates a Volume Snapshot
    Remove Volume Snapshot           Removes a Volume Snapshot
    Create Storage Virtual Machine Peer with reservations
                                                     Creates a Vserver peer including cm_storage_augment reservations
    Create cluster peer with reservations
                                                     Creates a Cluster peer including cm_storage_augment reservations
    Note: These commands do not depend on the cm_storage_augment schema and may be used independently if needed.
    DataSource:
    CM Storage Augment_6.0           Collects Snapshot information from OnCommand Unified Manager 6.0 and above (via direct cluster connection)
    Filter:
    Snapshots by Volume                 Returns a list of Snapshots for the specified volume
    Snapshots by Volume Regex       Returns a list of Snapshots matching a regex for the volume (ie. ^hourly)
    Clusters with Available Peer Relationships (includes self)
                                                      Returns a list of clusters that have an existing cluster peer, suitable for use in determining where Vserver Peering is possible.
    Filter Aggregates available through Cluster Peers
                                                      Returns a list of aggregates available on clusters that are peered
    Filter Aggregates available through Vserver Peers
                                                     Returns a list of aggregates available on clusters and vservers that are peered matching a regex. Useful in determining if a similar named Vserver exists on the destination.
    Workflow-Example: Create Snapshot
                   Creates a Snapshot of the selected Volume.
    Workflow-Example: Remove Snapshot
                   Removes a Snapshot of the selected Volume.
    Installation Steps:
            Import the DAR file (attached)
            On the Credentials tab, ensure each cluster that is configured in OnCommand Unified Manager is listed and has correct credentials.
            Select the Data Sources tab. Create a new Data Source of type "CM Storage Augment - 6.0"
            Enter details of the OnCommand Unified Manager server and user account
              (User credentials must be normal users and NOT database users)
            Ensure you select "cm_storage_augment" and "Reset Schema" to create database tables.
    Note: Reservations have now been included! Snapshot timestamp is set to 'now' so may adjust once a collection cycle has completed.
              Release v3 include Congruence Tests and Reservation Strings to complete the reservations information. It is also marked as PS Certified to indicate reservations are present.
               If using v2, ensure you update or reservations will not behave as expected.
               If upgrading to v4, ensure you select "Reset Schema" to allow the new Vserver and Cluster Peer tables to be created before the next collection.
    Please report any feedback to [email protected], thanks!
    Enjoy!
    - Michael Goddard.

    Hello, I had no issue importing the dar file but am having one getting the cluster setup as the data source.  Credentials have been set and tested successfully, an OCUM data source was previously setup and tested successfully, but the cluster data source fails with the following error in the wfa.log: failed: com.netapp.wfa.cache.execution.CacheException: Error running data acquisition script: At C:\Program Files\NetApp\WFA\jboss\standalone\tmp\wfa\cm_storage_augment4582972690885238274.ps1:172 char:43 WFA version 2.2 GAWindows 2008 R2 EE (new vm)PowerShell 3.0.NET 4.5OCUM 6.1cDOT 8.2.1p1IE8 and FF32 Has anyone seen this or have an idea on how to fix it? Thanks.   

  • UNIFIED MANAGER ALERT : on EXPIRING SSL certificates in clustered Data ONTAP systems

    The default ssl certificates on clustered Data ONTAP systems are valid for 1 year.
    Since we have cDOT clusters monitored via Oncommand Unified Manager 6.2, we would like Unified Manager to alert on expiring Certificates.
    Is this possible in OCUM 6.2?
    Thanks

    Thanks Saravanan, Initially i had it on RHEL 6.6, and i see some of the existing packages were of a older version and created some issues while rrdtool and sql installation. but i managed to do the installation and faced the same issue. I Didnt know that this is a user account issue not a package dependency issue.and thats the reason i got my server upgraded to RHEL 7.1 and the installation went fine but the same issue. But its working for now, thanks again :-)

  • Unifier manager is empty in mixed node

    Hi experts,
    I created a mixed node for the Attributes of an tablelike  Assignmentblock. The collection of the mixed node is filled correctly with the information of the entity and the extra structure. The problem is, that the extra Attributes are empty in the Assignmentblock.
    I debugged and got the following information.
    In get_xxx Method i get the wrong entity. current = collection_wrapper->get_current( ).
    the collection_wrapper hast a collection_reference to cl_bsp_wd_2collection_wrapper (my Class for my mixed node)
    There I have the attributes CL_BSP_WD_COLLECTION_WRAPPER  with the Attribut COLLECTION_REF (this collection ref is filled with all my data correctly) and the attribute CL_BSP_WD_2COLLECTION_WRAPPER with the attribut UNIFIER_MANAGER which collection is empty.
    Now, how can i get the correct current collection or how can i fill the collection of the unifier manager?
    Thanks and regards,
    Sebastian

    Hi,
    What is the solution to this ?
    We are facing exactly the same issue ?
    Thanks,
    Ashish

  • Cisco Unified WFO - Call Recording and Quality Management with Extension Mobility agents

    Hi All,
    We're considering Cisco Unified WFO - Call Recording and Quality Management for a customer running UCCX 8.0, agents on multiple WAN sites, all agents using extension mobility.
    The documentation I've been able to find describes three different recording methods:
    Using Desktop Recording service (Endpoint) to record from an agent’s desktop.
    Server Recording - Uses SPAN (not so good for remote sites)
    Network Recording - Uses CUCM recording service / SIP trunk / phone's built in bridge.
    Network recording or Desktop recording should be suitable for the customer but it seems that Extension mobility is not supported.  Extension Mobility is not mentioned in the 8.5 installation guide, it is mentioned as ‘not supported’ in the 8.0 guide as follows:
    'Server Recording and Network Recording have the following limitations:
    • Extension mobility is not supported.'
    Neither version's documentation specifically mention extension mobility in relation to the desktop recording method, though I realise this is a similar approach to the 'server recording' method.
    So the question I have is:  Is extension mobility supported in any way on version 8.0, or version 8.5 for recording?  And if so which recording method(s) are supported?
    Thanks,
    Jonathan

    Hi,
    I had more luck asking questions over at the Calabrio forum - they make the software and Cisco re-brand a version of it - there is some good info on their portal (http://portal.calabrio.com), you have to register but it's fairly painless.  The answer I got was:
    "QM Desktop recording has always supported extention mobility as it determines the recorded user by the desktop user's login. Extention mobility was not supported for Server and Network recording until the Calabrio QM 8.6.2 release in April 2011 and will be added to Cisco QM starting with QM 8.5.2 in June 2011"
    Regards,
    Jonathan

  • OnCommand Performance Manager CPU Graphs?

    All, Does the OnCommand Performance Manager CPU graphs report average CPU utilization or ANY load? Thanks in advance for the help!

    Hi, As per the documentation: Cluster CPU TimeDisplays a graph of the CPU usage time, in ms, for all nodes in the cluster used by the selected workload.The graph displays the combined CPU usage time for network processing and data processing. The CPU time for system-defined workloads that are associated to the selected workload, and are using the same nodes for data processing, is also included.You can use the chart to determine if the workload is a high consumer of the CPU resources on the cluster. You can also use the chart, in combination with the Reads/writes latency chart under the Response Time chart, or the Reads/writes/other chart under the Operations chart, to determine how changes to workload activity over time impact cluster CPU utilization. Thanks

  • OnCommand System Manager recieves error 500

    Good day, i am running OnCommand System Manager ver 3.1.1 on Windows. Today, for the very first time, i have seen this issue: i can connect to my 3210 running DataONTAP 8.0.3P2 7-mode, but when i try to reach my new 2240 running DataONTAP 8.1.3P3 7-mode i recieve an error 500 "connection refused". I have found this workaround: on the 2240s i have issued the command >options httpd.admin.enable on ;after this the OnCommand System Manager probably still tries a secure connection, on the console i see errors like [hostname: HTTPPool03:warning]: HTTP XML Authentication failed from MyClientIP .  But now i guess OnCommand System Manager falls back to a non secure connection, i see the question "do you want to set up a secure connection or continue without...", i answer "continue without" and i'm able to manage my filers again. What's happened? Maybe something java updates related? Thanks in advance.
    Alessandro  

    While removing newer version of Java and installing older versions probably fixes this in most cases, do you really want to run version of software that have known vulnerabilities in them? I think that companies like NETAPP, EMC, DELL, HP, etc, etc., need to be accountable for staying current.  They need to upgrade the applications regularly to stay compatible with the platforms they develop in.  The days of write it once and forget it are long gone.  The threat vectors have changed and continue to change on a daily basis. If I had machine that was dedicated to doing nothing other managing storage, network and servers, that never saw any portion of the production network and was isolated 100% from the internet, perhaps leaving archaic versions of depreciated software out there would be an option.  The days of doing business this way are also long gone. Cannot speak for everyone of course, but I don’t have the real-estate on my desk and have no desire to run up down the hall to my MDF every time I want to manage something in the environment.   

  • Release Timeframe for Unified Manager 6.2.1 or 6.3?

    Curious if anyone knows the timeframe for the next release of Unified Manager? I've heard this is supposed to bring the ability back for an event to kick off a script. We use this to automatically generate tickets.

    Hi Branden, Unified Manager 6.3 was released today, and I just checked to make sure the documentation, etc. is on the NetApp Support site. Please check and let me know if you need anything else.Cheers.

  • SNMP Configure OnCommand System Manager 3.1 on FAS2020 Ontap 7.3.7

    Hi, I have the to discover snmp after configure SNMP. Even I tried both trap hosts with my windows IP where I installed Oncommand system manager and the IP of Ontap 7.3.7. Can someone please verify which host is correct one? what is the requirement for SNMP configure. Thanks,Kevin.

    Sorry, access for this KB is restricted. Then, check following point and fix them. 1. Check if SNMP agent is enabled.
       filer> options snmp.enable
       If not, enable it by "options snmp.enable on"
    2. Check if SNMP access is allowed.
       filer> options snmp.access
       If IP address of System Manager host is not listed, set it by "options snmp.access host=<IP address>"
    3. Check filer's SNMP community name.
       filer> snmp community
       By default, "ro public" is displayed.
       If you have modified SNMP community name, you need to modify registration on System Manager.
       Edit C:\Users\<username>\NetApp\SystemManager\SystemManager.config and adjust snmp-community
       element under storage-system element.

  • Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

    following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

    Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

  • How to manage marketing events and keep trask of subscribers ?

    Hi all,
    I'm working on CRM request for proposals in France and I have more and more often one business requirement coming from the customers.
    They often asks to generates outbound campaigns for event that they organize. It could be Sales event, Marketing events, Training sessions etc... ?
    So, for that, they are doing target groups, generating outbound campaigns and have to manage customer feedback and booking if customer accepts. For some customers, it could also generates one billing flow once the customer has booked his participation.
    Do you have any idea on how to handle that in SAP CRM as much easy as possible, how to easily follow-up registrations and use reports on that ?
    Do you know if part of this process could be managed thru RDS ?
    Many thanks in advance for those who could help me.
    Best Regards.
    Stephane BENETEAU

    Hi Stephane,
    It looks like you are looking for more information on Campaign Automation.
    Please see these links. I am sure u will get lot of helpful information.
    http://help.sap.com/saphelp_crm70/helpdata/en/45/ff8980cbb709eee10000000a1553f6/content.htm
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20283126-36ca-2d10-6983-92ed18d36644?quicklink=index&overridelayout=true
    Also Campaings come under CRM Marketing. So you will get more focused information in the Marketing Forum.
    SAP CRM: Marketing
    rgrds,
    Randhir

  • Open module for managing property file and environment variables

    Looking for an open module for managing property files and environment variables (like CLASSPATH) set in a shell script. For handeling properties (preserving comments, supporting includes, appending new entries, and more) I have looked at SuperProperties from openadaptor but find certain functionality lacking. As for interfacing with common shell scripts/files containing setting for CLASSPATH, JAVA_HOME, other system/application variables another type of object editor is needed. Maybe JFIG?
    Any ideas are greatly welcomed.

    You seem wright, you hit a brick wall here with Air to find the location
    of the command console on windows...
    So in fact I never build an exe tool, but this little problem was a nice
    case to test it and I tried it.:
    I downloaded monodevelop
    -GTK# for .NET 2.12.10*
    -MonoDevelop 2.4.2*
       from http://monodevelop.com/Download
    created a console project and had an exe in 5 minutes !
    You can download the findconsole tool and the projectfiles here:
       http://greencollective.nl/temp/dump/findconsole_monoproject.zip
    findconsole.exe will reveal the path/location of cmd.exe on a windows system.
    Cheers,
    Latcho

  • Questions on managing iTunes content and devices?

    I've been a subpar iTunes user for several years now and I figured it was time that I just started asking some questions in order to get help. I love all my different iOS devices, but at times it seems that it's extremely difficult to manage content amongst the devices as well as my different computers (I use a PC for personal use and a Macbook for work.) My wife also has her own iOS device (Which we just use my AppleID on to keep all purchases under a single account) and a PC. So it seems like a constant juggling act to keep my content properly managed.
    The new iCloud stuff looks like a wonderful step in the right direction for helping manage content on my different devices, but I'm still a little curious about the best way to go about storing, sharing, and accessing content. So all that being said, here's my current setup and questions.
    First of all, I have my iTunes Media Folder on set to save everything to a Network Attached Storage I have at my home. This is the version of iTunes that I run off of my PC, which I guess I would say is my primary source of iTunes usage and how I generally choose to manage my content and move things to and from my iOS devices. Everything works out pretty well until I try and manage my content on any other computer.
    Creating a consistent storage location on a NAS
    My first basic question is, "Is it possible to have multiple versions of iTunes on different computers point to the same Media Folder?" If I could have all of my iTunes folders work off the same Media Folder that would probably help cut down on the confusion. However, I'm not exactly sure if this is just a matter of giving them all the same path to use or if there's additional permissions and things that must be setup. Also, what happens if I decide to purchase content through iTunes and I'm not connected to my home network, so the content cannot be saved to my NAS? Does it save to a default location that I can just later move to my NAS?
    Home Sharing
    What exactly is "Home Sharing"? I've read a little bit about it but I'm not 100% sure what it actually gets me since I already have a NAS. Is this what I need for setting up multiple computers to share the same Media Folder? Do I need this at all since my data is located on a central NAS on our home network?
    Syncing devices from multiple computers
    One of the biggest headaches I get with trying to manage content across multiple computers and devices is that I have to use one specific computer to Sync and Manage content on a device. For example, I have my iPhone synced to iTunes on my PC so I can edit and manage music on that device from my PC. But if I'm at work on my Macbook and decide I want to make some changes to Music I have there, then I have to sync my device to the Macbook, effectively wiping all the current content on my phone. Is there no way around this?
    iCloud Questions
    I have content that I've purchased on my iPhone or iPad and want to download it from the cloud to my PC or Macbook, or my wife's computer. Do I have to "repurchase" this content in order to do that, or does it just download directly for free since I've already purchased it before?
    I apologize if any of these are "silly" questions. I've tried to read up on this stuff but I still have difficulty completely understanding it.

    I've been a subpar iTunes user for several years now and I figured it was time that I just started asking some questions in order to get help. I love all my different iOS devices, but at times it seems that it's extremely difficult to manage content amongst the devices as well as my different computers (I use a PC for personal use and a Macbook for work.) My wife also has her own iOS device (Which we just use my AppleID on to keep all purchases under a single account) and a PC. So it seems like a constant juggling act to keep my content properly managed.
    The new iCloud stuff looks like a wonderful step in the right direction for helping manage content on my different devices, but I'm still a little curious about the best way to go about storing, sharing, and accessing content. So all that being said, here's my current setup and questions.
    First of all, I have my iTunes Media Folder on set to save everything to a Network Attached Storage I have at my home. This is the version of iTunes that I run off of my PC, which I guess I would say is my primary source of iTunes usage and how I generally choose to manage my content and move things to and from my iOS devices. Everything works out pretty well until I try and manage my content on any other computer.
    Creating a consistent storage location on a NAS
    My first basic question is, "Is it possible to have multiple versions of iTunes on different computers point to the same Media Folder?" If I could have all of my iTunes folders work off the same Media Folder that would probably help cut down on the confusion. However, I'm not exactly sure if this is just a matter of giving them all the same path to use or if there's additional permissions and things that must be setup. Also, what happens if I decide to purchase content through iTunes and I'm not connected to my home network, so the content cannot be saved to my NAS? Does it save to a default location that I can just later move to my NAS?
    Home Sharing
    What exactly is "Home Sharing"? I've read a little bit about it but I'm not 100% sure what it actually gets me since I already have a NAS. Is this what I need for setting up multiple computers to share the same Media Folder? Do I need this at all since my data is located on a central NAS on our home network?
    Syncing devices from multiple computers
    One of the biggest headaches I get with trying to manage content across multiple computers and devices is that I have to use one specific computer to Sync and Manage content on a device. For example, I have my iPhone synced to iTunes on my PC so I can edit and manage music on that device from my PC. But if I'm at work on my Macbook and decide I want to make some changes to Music I have there, then I have to sync my device to the Macbook, effectively wiping all the current content on my phone. Is there no way around this?
    iCloud Questions
    I have content that I've purchased on my iPhone or iPad and want to download it from the cloud to my PC or Macbook, or my wife's computer. Do I have to "repurchase" this content in order to do that, or does it just download directly for free since I've already purchased it before?
    I apologize if any of these are "silly" questions. I've tried to read up on this stuff but I still have difficulty completely understanding it.

  • How do you reset or find your security question answers? I dont have the option to send a rescue email in manage your account, and i cant find a fix! I have tried so many things.!! Help this is annoying because i cant get anything from the appstore

    I. Forgot the answers to my apple id security questions. I cant buy anything from the app store. I have tried manage your account and tried to send a rescue email but i dont have the option. This is so annoying and i have tried many things, help!

    Have you tried contacting the owner of the iPhone?

  • I am trying to manage family sharing and I get a warning "invalid apple ID" that accounts can participate in one Family at a time.  How can I add my daughter when I can't even access my account?

    I am trying to manage family sharing and I get a warning "invalid apple ID"  accounts can participate in one Family at a time.  How can I add my daughter when I can't even access my account?

    Your best bet would be to try resetting the password to the account that you would like to use via iForgot
    Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
    After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

Maybe you are looking for