One line item missing from PO created using Shopping cart

Hello Team, we have raised a shopping cart with 6 line items, having the same vendor and account assignment details. Once the shopping cart was approved the PO was created but the 3rd line item was missing in the PO. When we checked in BBP_PD, the 3rd line item is still showing as item in transfer process. Can anyone please throw some light to this issue. All the line items were approved.
Thanks.
Richa

Hi Richa,
Is there any error in RZ20 for that shopping cart?
Best Regards,
Bharathi

Similar Messages

  • Line item missing from FBL3N report

    Line item is missing from FBL3N report. I am selecting correct parameters for FBL3N report.
    The correct balance is shown in the FS10N report.
    I have checked the document, it is not reversed.
    Can anyone please tell me the reason for the same?

    HI ,
    If its related to 2009 and are you sure that you have selected fiscal year or date in which that document falls .
    Can you Do one thing Please go to Dynamic selection of FBL3N and put that document number in Document number field and then find out whether that documents  come or not .
    if it does then please look at posting date and GL accounts etc for that  and check the header data as well.
    May document is related to different company code .
    One more thing Please check when you run FS10N display line item can you see document there if you can then definatley you will be able to see .
    Please attached the screen shot of document with header data .
    Many Thanks
    Regards.

  • ICR Process 2 - Line Item Missing from Reconciliation Step FBICR2

    Dear Experts,
    I am very close to process 002 working well. I have a scenario I am hoping you can help with:
    1. I posted two intercompany documents
    (Screenshot of Both Documents Here: http://img139.imageshack.us/img139/7264/documentsposted1of2.png)
    2. Data Assignment and Reconcilation is run and three of the line items are automatically assigned, the forth is missing
    (See screenshot here: http://img412.imageshack.us/img412/7334/missing4thlineitem2of2.png)
    Note: The missing item appears in List of Total Documents and List of Records in the auxilary programs
    Where is the $14USD debit to G/L Account 'IC Rev'? Any insight would be greatly appreciated.
    Thanks,
    John Scime
    +1-716-803-4920

    If I unassign the line it only appears in the hierarchy tree undor Company 10 /TP 20 and on the Company 10 unassign box in the dashboard.
    If I go to the hieracy tree under Company 20/TP10 the other half of the document is there under Company 10 unassign box in the dashboard.
    This is strange because both records will not show up on a single screen and therefore (ie. one record on the Company unassigned box and the other in the TP unassign box), they cannot be manually assigned.
    Any ideas how I can bring there screens together (Ideally Auto-matching, but Ill take anything at this point)
    Thanks

  • How to retrieve line Item values from an object using groovy

    def RevenueObject = nvl(ChildRevenue,0);
    println('revenueItems==='+revenueItems.size());
    while(RevenueObject.hasNext())
    def revenueLine = RevenueObject.next();
    revenueLine.setAttribute('Test_c', 'Hello');
    } Groovy Scripting
    Error : Getting null value for Revenue object
    Exception in expression "OpportunityEO" trigger "getRevenueItems" : groovy.lang.MissingMethodException : No signature of method: oracle.jbo.server.ViewRowSetIteratorImpl.size() is applicable for argument types: () values: [] Possible solutions: is(java.lang.Object), find(), use([Ljava.lang.Object;), with(groovy.lang.Closure), sleep(long), find(groovy.lang.Closure)
    at "OpportunityEO" trigger "getRevenueItems" line 7
    No signature of method: oracle.jbo.server.ViewRowSetIteratorImpl.size() is applicable for argument types: () values: [] Possible solutions: is(java.lang.Object), find(), use([Ljava.lang.Object;), with(groovy.lang.Closure), sleep(long), find(groovy.lang.Closure)

    Depending on the message the line number might be in one of the fields:
    MESSAGE_V1
    MESSAGE_V2
    MESSAGE_V3
    MESSAGE_V4
    Although if the message simply is not meant to include the line number, it won't be there. That's the way it is. If there is a user exit available, you may add your custom messages with the line number. In some user exits (in sales order for sure) there is a special variable (flag), which is set when the BAPI runs the transaction.

  • URGENT: Multiple line items in delivery document created for a STO

    Hi Gurus,
    We ar ecreating deliveries using VL10b for a STO. Teh TSO has 40 - 50 line items. But the delivery is created with one line item only an dit creates a delivery for each line item. How cna we allow the inclusion of multiple line items in delivery?
    We are using delivery type NL an ditem categor is NLN.
    Geratly appreciate any help in that.
    Thanks,
    KHAN

    Hi Gianpaolo,
    Thanks for your suggestion I have 5 shedule line itmes for one material and two shedule line for another material and when i changed the material by selecting one line for each sales document no and creates the delivery it is howing three line itmes for the 1st material and line items for the second and quantities equal to the changed quantity in VL02N. and I have value "1" in field "Split per sched.line" in "user role" view of VL10E.
    Kindly help.
    Thanks and Regards
    Tanweer

  • Delivery get created with one line item from sale ord having two line item

    I have an issue when delivery is created with reference to a sales order.
    The sale order consist of a header with customer group VBKD-KDGRP = '01'. There are two line item for this header with item 10 having customer group '01' and line item '20' having customer group '02'.
    When delivery is created with reference to this sale order the delivery contains only one line item corresponding to line item 10 having customer group '01' of the sale order. But I need to have both the line item in the delivery irrespective of difference in customer group.
    What makes this split up of delivery? Is there any configuration or user exit that need to be applied in order to adress this.
    <REMOVED BY MODERATOR>
    Thanks in advance
    Ramachandran Babu
    Edited by: Alvaro Tejada Galindo on Jun 13, 2008 5:45 PM

    Check if there is any copy routine applied in the copy control from order to delivery - transaction VTLA. The routines themselves can be found in transaction VOFM (Data transfer -> Deliveries). LIKP-ZUKRL field contains the split criteria (by the way, check what's in that field on your deliveries).
    It's possible that there is something in the current routine that is forcing the delivery split. Otherwise you can probably use similar approach to make it stop splitting.
    Hope this helps.

  • Sales order Userexit to copy item text from one line item to other

    Hi Gurus,
                 I have an urgent issue. Based on item category in sales order, for one line item, I am getting item text. Now I have to copy same item text to other line item.
    Till now I tried save_document_prep & save_document to
    build object tdname & fetch all tdid from table stxh for object 'VBBP'.
    After that READ_TEXT and SAVE_TEXT function module.
    But during creation of sales order I am not able to get any value in STXH table for created sales order. Now I want to know from which internal table I can get item text ?  (some internal table should be there like xvbap to get text per line item)
    Or is there any other way to do this... Please help.
    Points will be rewarded.
    Thanks,

    Hi ,
    try something like this .
            l_name = ls_vbap-vbeln.
            IF l_name IS INITIAL.
              l_name = 'XXXXXXXXXX'.
            ENDIF.
            CONCATENATE l_name ls_vbap-posnr INTO l_name.
            CALL FUNCTION 'READ_TEXT'
                name            = l_name
    Regards
    Prabhu

  • Create a report same as KSB1 and add WBS line item details from CJI3

    Hello Everyone,
    I need to create a report exactly like KSB1 which should have a selection screen exactly like KSB1 but it should also display the WBS line item details from CJI3.
    What is the right way of doing it? Please advice.
    COEP is pretty huge in Production, and we need to fetch data by a specific date in selection screen or a cost center group. This can take a long time to fetch data from the table based on selection screen input. Are there function modules or do we need to use some other tables to fetch data same as COEP?
    Thanks for all your help.
    Regards,
    Shipra.

    Hai ,
             Please go throuth the note  325546  , u need to implement the customer exit  COOMEP01 .
    regards,
    K.Vinay kumar

  • Shopping cart created with one line item with qty 10  . PR need to be creat

    Hi gurus
    1SC created for  ONE LINE ITEM with QTY  10
    PR need to be created with  10 LINE ITEMS with Qty 1.
    Classic Scanario
    Advise .
    2.Also please let me know  what the batch jobs for  delta  ( user data or HR data) upload. To upload all user changed data synchonization job
    3.Also please let me know what is the batch job for  escalation emails for approvals
    SD

    close not answered

  • FBL5N: missing one line item while viewing the report in spool

    Hi Experts,
    I 've got a problem while viewing FBL5N report in spool. The report is missing one line item, but when I
    execute it in foreground, the report was ok.
    Can somebody explain?
    TQ.

    Hello,
    It seems you should implement notes 1100728 and  1166251 !
    Best Regards,
    Glayds xing

  • More than one VAT code on one line item?

    Hello,
    Running ECS SRM 5.0.
    Is it absolutely impossible to set more than one VAT code on one order line in a SC or PO?
    Can this be acomplished by using a user exit or anything?
    This demand comes from a public sector company which pays different VAT dependent on what they use as account assignment. In some orders when split account assignment is used, it might be two different VAT codes on the same line.
    rgds
    GAR

    Hi
    Which SRM version are you using ?
    As far as i know, this is standard SRM functionality as it not feasible to have multiple VAT codes against one line item.. This is not possible .. Please confirm the same with SAP by creating a Customer OSS message.. Do let me know...
    However this is possible by making the code as per your business requirments using BBP_DOC_CHANGE_BADI.. However, since i have not tried this.. You need to try this yourself..
    Hope this will answer your query..
    Regards
    - Atul

  • SO Multiple Line Items but one line item in billing

    Hi Experts,
    I have a requirement from a client whereby they want to consolidate the items in the sales order and create billing as one line item.
    Example: in sales order there are 5 line items (user need to have separate line items due to PR need to be generated for different vendors via 3rd party).
    Line item 10: Miscellaneous charges - $20.00
    Line item 20: Miscellaneous charges - $20.00
    Line item 30: Miscellaneous charges - $20.00
    Line item 40: Miscellaneous charges - $20.00
    Line item 50: Miscellaneous charges - $20.00
    In standard SAP, when the user generates billing document - the billing will show 5 line items. However user wants to consolidate them into 1 single line item  i.e. Miscellaneous charges - $100.00
    Please advice how can this be done.
    Rgds

    Hi,
    Go to Tcode : VTFL.
    There select your  Billing Type with respect to Delivery type. e.g F1 --- LF or F2 -
    LF.
    Select thet option and goto Items.
    There at item level , select the item category of your materials. There In Details :
    Maintain Billing Quantity : H as Cumulity Batch Quantity.
    Let me know weather is has solved ur problem or not.
    Thanks.

  • One PR for one line item in third party sales

    Hi all,
    When we create and save a third pary sales order, the system will create a Purchase Requesition.
    If there are 5 line items in the Sales Order, the system will create only one PR for all the line items.
    I will create only one sales order, and  I want one PR for one  line item of the sales order.
    How to Configure this.
    Regards
    VASU

    Vasu,
    PR in the sales order is generated by the settings in Schedule line and Item category. In a particular sales order, if there are 5 line items and of same item category and schedule line then system will give only one PR number. Again if the item category ans schedule line is different then there will be multiple PRs.
    Can you please elaborate more on your requirement. Again from one PR you can generate multiple PO
    Thanks,
    Raja

  • Change in one line item should Populate for all line items

    Hi ,
    We have added one custom field Prefereed Vendor at line item level.
    We have requirement that if Prefereed Vendor at one line item level is changed,
    then it should populate for all the line items.
    Can any one tell me how it can be implemented?
    Thanks in Advance.
    Snehal

    Hello,
    I assume you are referring to SC. In standard SRM Preferred Vendor is a partner to an Item. But based on your post, have you added the Preferred vendor as a CUF field?
    Anyway we can achive your requirement in DOC_CHANGE_BADI. This BADI has importing parameter IT_ITEM and exporting as ET_ITEM.
    1. Get the SC from PD buffer using BBP_PD_SC_GETdETAIL into LT_ITEM
    2. Compare the preferred vendor for every item in IT_ITEM with corresponding item in PD buffer
    3. If for some item, the preferred vendor for IT_ITEM is diferrent from that of LT_ITEM --> means we found the item for which preferred vendor was chaged
    4. Now populate ET_ITEM based on IT_ITEM along with copying the preferred vendor from changed item to all items.
    Rgds,
    Prasanna

  • One line item per page --- Urgent

    Hello,
    I am printing an order. But while printing an order I have
    a header
    main
    a footer.
    In main I have to print line items. Now while printing line items ,  my requirement is print ONLY ONE LINE ITEM PER PAGE.
    For every page header and footer should repeat.
    I am trying with AT NEW command but it is giving error. I am using table to loop on item data table.
    Please tell me urgently how to do it.
    Thanks,
    Madhura

    Hi,
    If you want to continue using the table this is what you can do.
    Im assuming u only use the table for printing line items
    So
    Create a loop above the table
    Place the table inside the loop.
    Uncheck the internal table check box inside the tables Data tab
    and copy that looping information into the loop.
    After the table, and inside the loop ..place the command node.
    Also place whatever data in ther main section of the Table now in the header of the table
    Edited by: Nehal Fonseca on Apr 23, 2008 6:35 PM
    Edited by: Nehal Fonseca on Apr 23, 2008 6:36 PM

Maybe you are looking for