One mov file plays in Media Viewer on Ext Hd Drv, imported into FCPX it plays 5 sec then goes black. No problem with other mov files.

One mov file plays in Windows Media Viewer in Ext Hd Drv. Imported as Proxy Media into FCPX it plays in both Event and Time Line for 5 seconds, then goes black. No problem with many other mov files in same project. Tried converting this one file into MP4, but produced only pixellated jumble.

Can you open the clip in the QuickTime player? What are the specs shown in the inspector?

Similar Messages

  • Rented film, fully downloaded (eventually) press play now then screen goes to authorizing, then goes black blank, no film , repeated process 3 times, still no joy. first and last time I rent a film with Apple, how do I get my money back ? Thanks

    Rented film from Apple TV  fully downloaded (eventually) press play now then screen goes to authorizing for 10 mins, then goes black blank, no film , repeated process 3 times, still no joy. first and last time I rent a film with Apple, how do I get my money back ? Thanks

    First, that cannot be an iBook G4 as that machine cannot run Snow Leopard let alone Mountain Lion.  To run Snow Leopard it has to be an Intel processor, not a G4.  What does it show as the Model Identifier in About This Mac, More Info, System Report, Hardware, Model Identifier?
    Second, if you have erased the hard drive there should not be remnants of any prior content.  Even though Disk Warrior is saying nothing is wrong with the hard drive, it sounds as though there are problems.  You may want to consider simply replacing the hard drive so there are no questions about faults.  A good source is OWC, http://www.macsales.com where they also have on-line videos showing how to do the replacement.
    Third, you could also try again to restart using the Snow Leopard DVD/CD and use Disk Utility on that install disk to erase again, and do it a couple times, then try to install.  If it continues to refuse, then it sounds as though there is a fault with the hard drive.

  • I have problem with playing stream  fullscreen. it goes black but with sound

    i have problem with playing stream fullscreen. it goes black but with sound. i have to wait 10-15 minutes then i can press fullscreen. what to do?
    s

    Thanks!! but i been fixing now for 10 minute ago by restart my macbook pro. My case is it show normal with Intenal-speakers and nothing mark with red light or mult so i tried to restart that it working again

  • I have an IPad 1.  For the past three days I've played Sims Freeplay without trouble.  Today it won't even open. It starts to, then goes black, then all the apps are visible again.  Any idea of what is going on?

    I have been playing EA's Sims Freeplay for three days.  Today the app will not open. It begins to, then goes black, then all the apps are there.  FB is doing it now, too.  Bookworm plays fine, as do other apps like ebooks and weather bug.  I don't know much about what goes on with an IPad, so any help is appreciated.

    - check the app store to see if the apps have an update available
    - delete and redownload the apps

  • Is there a forum devoted to old laptops like the pb100?  I'm trying to resurrect one and would like to discuss problems with others so engaged.

    Is there a forum devoted to old laptops like the pb100?  I'm trying to resurrect one and would like to discuss problems with others so engaged.
    Duane Bluhm
    duane
    <Email Edited by Host>

    Duane,
    For hardware questions, try here:
    https://discussions.apple.com/community/older_hardware
    (the Older PowerBooks category)
    For software, try here:
    https://discussions.apple.com/community/mac_os/classic_mac_os
    (the System 7 category)
    Jan

  • Can video files made with a Canon XA-10 be imported into FCPX?

    Files made with a Canon XA-10 do not seem to be recognized by FCPX.
    Recording system of camcorder is  MPEG-4 AVC/H.264.
    Is there a format problem or a media conversion that needs to be made?
    Thank you.
    John

    Tom is exactly right.  Connect the XA10 to the computer using the USB cable that came with it.  Then go File > Import from Camera.
    Up will pop the import from camera window, which should show two cameras -- your Mac's built-in iSight camera, as well as your XA-10.  And you should see the thumbnails from all the various videos you've shot with the camera.  Just select the ones you want to import and click Import.
    FCPX will begin importing (and transcoding) the videos.  Do not disconnect the camera while this process is unfolding (it may take a while depending on how many videos and how long the videos are).

  • HT1711 Have bought music, but, can't play it, my screen goes black

    Have bought music o iTunes, but, it won't play, screen goes black when I click on play.. Help?

    I just did this and we are now getting a pop up that says:
    Are you sure you want to sync movies? All existing songs, movies and TV shows on the IPOD will be removed and replaced with movies from your ITUNES library.
    Im afraid we will lose the music that she already has uploaded on her IPOD even though the option is to sync movies the warning states songs will be lost.

  • BluRay video plays for a few seconds then goes black...audio plays fine

    I have several videos that are to play from a main menu, then return to the menu.  On all of them, only a few seconds (ranging from 4 to 9 seconds) plays, then the screen goes black while the audio continues.  This is happening with all videos.  The menu structure is working fine, when I go to the end of each video the menu returns.  I'm on a MAC, and all quicktime movies play fine in quicktime player.  What am I doing wrong?
    Thanks
    Steve

    I'm in the Windoze world, and don't do BluRay, so I have no idea if the Avid codec is your problem
    I guess all I can suggest at this point is to Google for something like
    Encore CS5 Avid Codec
    and see if anything jumps out

  • How to view which updates were manually imported into WSUS

    We need to manually install updates on a workstation that is not joined to our domain (in a workgroup) and match the updates that are normally installed via WSUS.
    WSUS has some extra updates added that were downloaded from the Microsoft Catalog site.
    How can I see which catalog updates are added to our WSUS server?

    In that case, I don't know why I've never had the issue on my gazillions of Win7 deployments, and, this KB is therefore very misleading about Vista & later sysprep behaviour...  :S
    http://support.microsoft.com/kb/903262/en-au
    Unless the master image had actually been patched with Windows Update or WSUS, the master image would never actually have a SusClientID. That's the reason most organizations avoid this situation.
    I do not know why the article claims that sysprep was changed to clear this ID. It still does not do it, as evidenced by the thousands of threads in this forum directly related to this issue over the past seven years (since the release of Vista), most
    of which involved just as many Windows 7 systems as they did Windows XP systems.
    The 2nd and 3rd paragraph in the symptoms section is still the case:
    This issue  occurs if the computer was set up by using a Windows 2000 image, a Windows Server 2003 image, or a Windows XP image in which the registry value for SusClientID is populated before it is deployed to client computers.
    When you use Sysprep to generalize an image for a virtual machine, or when you use a unique SID-generating technology to create the images,
    the SusClientId registry value is not cleared if it is populated within the image before the image is deployed.
    What's also relevant (and disappointing), and may have something to do with the claimed involvement of sysprep, is that the WUAgent v7.0 was supposed to have self-detecting capabilties for duplicated SusClientIDs. See the note in that section about "changes
    it's SusClientID if the hardware changes". Sadly, it doesn't work. Also, there's no "hardware change" on virtual machines, so that's a non-starter from the get go. I can count on one hand the number of times I've seen a WindowsUpdate.log where the WUAgent
    correctly detected a duplicate SusClientID and spontaneously generated a new one.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • E5: black screen problem with FLV file

     give solution.....when i play FLV there is option for  pause, stop but black screen.what may the problem .other file plays normal .help me plzzzz
    Solved!
    Go to Solution.

    The only solution is likely to get a newer phone.  The Flash player on your phone (and mine) is based on Flash 8, which is several years out of date.  Also note it's called Flash Lite, which to me suggests that certain features have been removed.  Your FLV file must be trying to do something the player doesn't support.

  • I am an absolute newcomer to Lightroom.  I have downloaded images from camera (OMD EM1) and divided them into folders.  Some folders work ok in Develop mode.  With other folders I get the words "This file could not be found".  What should I do

    As an absolute newcomer to Lightroom 5 I have downloaded images direct from camera (IOlympus EM-1) and divided them into folders. When I go into Develop mode, some folders can be developed ok , but with images from two other folders I get the message "This file could not be found".  What should I do?

    may i suggest opening the files in Olymous Viewer 3  and exporting them (you can do some editing there if you wish or not) asTIFF files. After that you can import the new files into LR. LR seems to like tiiff more than .orf files 
    The advantage to using OV3 is that it seems to do a much better job converting RAW EM1 files. Colors are more accurate ( my red flower pot turned orange when loaded directly into lightroom)
    . The tiff files just LOOK better in LR  after the conversion . there is a youtube on this subject and when i tried it myself i was impressed 

  • Ipod plays 5 songs, then goes silent, often showing Cover Flow as ghostly boxes.

    It does this mostly on newer albums. I've already tried: Latest iTunes, latest iPod software, reset, restore, and finally return/exchange for brand new 160 gb. Still!
    I can fastforward to the 6th and subsequent songs to play them.  But if I fastforward anytime before the 5th song is over, it will usually still stop after the 5th song.  When I turn the screen on after a freeze, the album covers are often gray & white squiggly lines.  I did get the Red X of Death one time yesterday, but that went away.
    The iPod is fully charged.  The only non-standard setting I have is EQ (equalizer) set to Rock.  Remember this is my second iPod having this problem About all I haven't tried is uninstall/reinstall iTunes -or- Restore iPod from Disk Mode.  Whoever solves this should win the Nobel Prize.
    Suggestions?

    Since the problem has been persistant across two different iPods, it seems like that the issue is with the tracks themselves.  You said most of the tracks giving you problems were purchases from the iTunes Store.  Do they stil play okay in iTunes?
    Either way, I would remove them from iTunes, redownload them again at no cost via iCloud and resync them over to the iPod Classic.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    B-rock

  • Source registration-successful with one  problem with other

    Hi everyone,
    I have two schemas icecube_cur_ownr and icecube_his_ownr.
    I can access the two schemas from SQL plus,toad.The TNS entries are as follows
    icecube_cur_ownr=
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xx.xx.xx)(PORT = 1521))
    (CONNECT_DATA =
    (SID = PRIMARY)
    icecube_his_ownr=
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xx.x.xx.xxx)(PORT = 1521))
    (CONNECT_DATA =
    (SID = CADS)
    Also I am able to register the icecube_cur_ownr as a source and succesfully import the tables in OWB through design centre
    The problem is with icecube_his_ownr.During the registration process,when I try to test the connection it pops me an error in the test results
    ORA-12170 :TNS:connection timeout occurred
    Ignoring the error,I proceeded to import the tables and the error message popped up is as follows
    SQL exception
    Reporsitory error:SQL exception
    Class Name:cacheMediator
    Method Name:getDDentry from DB
    Repository error message:ORA-12170 :TNS:connection timeout occurred
    Wondering why the connection is successful for one source and failing for the other as I have followed the same procedure for both the cases.
    Could you please guide me to solve this.
    Thanks Much
    Sridh

    Hi,
    it's different because you connect to diffferent instances.icecube_cur_ownr=PRIMARY, icecube_his_ownr=CADS.
    Did you use the same TNS-Entry to connect with the CADS per sqlplus? If you have several oracle_homes you cannot be not really sure what tnsnames.ora the owb uses.
    So look for some other tnsnames.ora files on this machine and verify the entries for icecube_his_ownr. Perhaps they differ.
    Or use the host/port/Service-method to create the source location to icecube_his_ownr, not the tns option.
    Regards,
    Detlef

  • How do I move my entire iPhoto library to Lightroom 5.6. Will the events be imported into separate albums, or are the images going to be shuffled.

    I've had it w/ iPhoto. Most of my editing is in PSE so it make sense to use Lightroom. (have no idea HOW to use it). So what is the best way to move 30 events and approx. 12K pix.

    Lightroom Help | Import photos from iPhoto (Mac OS)

  • Why are routine processes (mouse scrolling, viewing videos, appearance of typed text) filled with pauses? I've disabled or uninstalled most of my plug-ins, and don't encounter this problem with other browsers.

    My problem is unique to the Firefox browser, and does not occur with Opera or IE.
    Way too often (about once a minute or so), Firefox will suffer a brief pause in performing functions, even simple ones.
    It is impossible for me to watch any video in Firefox without the picture pausing periodically. Oftentimes, text I type suffers a delay before appearing in a web form. Mouse scrolling is not very dependable at all.
    I have disabled or uninstalled most of my plug-ins and add-ons, yet the problem still persists. I have attempted to streamline to only the most necessary plug-ins, but to no avail.
    I love Firefox, but I don't like the choppy videos or downgrading of my productivity these problems are causing.

    My problem is unique to the Firefox browser, and does not occur with Opera or IE.
    Way too often (about once a minute or so), Firefox will suffer a brief pause in performing functions, even simple ones.
    It is impossible for me to watch any video in Firefox without the picture pausing periodically. Oftentimes, text I type suffers a delay before appearing in a web form. Mouse scrolling is not very dependable at all.
    I have disabled or uninstalled most of my plug-ins and add-ons, yet the problem still persists. I have attempted to streamline to only the most necessary plug-ins, but to no avail.
    I love Firefox, but I don't like the choppy videos or downgrading of my productivity these problems are causing.

Maybe you are looking for