One output PDF - multiple reports

My client wants to get the output of 12 different reports in 1 PDF.
What's the shortest possible method to do this.
I am using forms/reports 10g

This thread maybe helpful:
Re: How to append pdf (Very Urgent plz)
Also there are other utilities available on the internet for merging pdfs.

Similar Messages

One Output with multiple communication types

Hello,
My requirement is to print the document as well as send an email to the customers from the same output. Basically One output with multiple communication types ( PRINT & EMAIL). How to configure this in the output type configuration area? Please reply. Thanks

This should be possible with the same output type,
have the output type defined with multiple medium in NACE under processing routines. (say print out in one line & external send in another).
have the condition record maintained appropriately for different customers with different medium.
Note: if your access has customer, dont think you can maintain both 1 & 5 for the same access.
if this functionality is required, i think you can acheive this by maintaining the output under different access, but this will not ensure the same condition type flowing into the document unless the earlier condition type goes to processed status.
Thanks & Regards
Ilango

Report Dasiy Chaining - 1 report, combined output of multiple reports

I have a question here. Is there a way to create a report that will combine the output of other BIP reports into one report? In my case, the person who runs out reports want to run every report concerning units from 1 report. Right now the reports consist of 3 individual RTF templates spread over 2 individual reports. I have attempted combining the data templates and rtf templates where each report was in its on section but this is not working very well because I have no way to reset page numbering when the reports flip over from one to the next. I have it set in word to reset at the end of the sections yet instead of 1 through x in report 1 then 1 - y for the pages of the next report I get 1 through (total number of pages). But is there an easier way to combine it?
Message was edited by:
David Pulliam

We are running BI Publisher 10.1.3.3.1 stand alone version (i guess) on Oracle 10g AS.

One ibot for multiple reports (or all reports in one topic/folder)

Hello,
Is it possbile to set the ibot for report caching to consider a whole bunch of reports rather than setting
up one ibot for every single report?
Regards,
metalray

Hello ADB,
Thanks for that. I wonder how to prove that the caching worked or that is has been done.
I noticed the .TBL files in the cache directory but that does not tell me much. Using OBI Administration and looking at the cache on the physical layer
did not help me either understand how all reports in my dashboard are now cached by running the ibot at midnight.
Out of the BI Answers, Delivers and Dashboards manual:
"NOTE: The Oracle BI Server maintains its own cache. This cache is separate from the Oracle BI
Presentation Services cache.
When you select a specific dashboard or request, Oracle BI Presentation Services checks its cache
to determine if the identical results have recently been requested. If so, Oracle BI Presentation
Services returns the most recent results, thereby avoiding unnecessary processing by the Oracle BI
Server and the back-end database. If not, the request is issued to the Oracle BI Server for
processing."
So basically I want to know how I can see that BI Presentations Services has
really cached the reports in my dashboard i.e. if my ibot works
Thanks,
metalray

Output same Deski report as PDF and XLS

Hello,
will it be possible to generate (not schedule) a Deski - Report using Java SDK ?
desired workflow:
- generate/refresh the report to hold new data (User specific, Local specific)
- output this report in Formats PDF and XLS
- store the output - reports in Users inbox
The goal is to generate the report only once and output the same twice - as pdf and as xls.
As far as i saw in scheduling a report, it is only possible to produce one output (pdf or xls), if we need both, we have to schedule twice. And therefor we will have to generate the same report twice.
I found somthing like
binaryView = (BinaryView)documentInstance.getView(OutputFormatType.XLS);
binaryView = (BinaryView)documentInstance.getView(OutputFormatType.PDF);
in RBean for Webi - reports.
Looking forward for any idea.
Thanks in advance.
Johannes
Edited by: Johannes Kammerer on Sep 15, 2009 4:55 PM

If you're on XI 3.x, then you can specify multi-format exports using Publications.
Otherwise, you'd need to export to a file using REBean SDK, then Enterprise SDK to create a new InfoObject for that artifact.
Sincerely,
Ted Ueda

Multiple Reporting Currency Setup in Release 11.5.9

Hi,
I need a clarification:
Can one any tell me about the feature of Multiple Reporting Currency (MRC)implementation in Oracle Apps 11.5.9??
Whether it is a newly introduced feature in apps or will it come as existing feature in 11.5.9 instance.
If the MRC setup is already existing in the same instance, Do we definitely require any additional patch to implement MRC in 11.5.9??
Pl. respond if anyone knows the answer.
Regards
Ram

Can any one had implemented Multiple Reporting Currency Concept in Oracle Apps 11.5.9??
Respond....
Thanks/Ram

How to generate multiple output pdf's from one oracle reports

how to generate multiple output pdf's from one oracle reports.
I have a report where I have to generate more than one output files from the same report based on a parameter.
Each output file is for each parameter.
Is this possible in oracle reports, is so how ?

You can better post your question in the reports forum instead of this pl/sql forum.

Clubbing multiple reports to one output

Hi,
Is it possible to club multiple reports output to single output?
Thanks

Hi,
Thanks for your reply.
What I mean clubbing multiple reports is that, all these reports are independent reports.
When the user likes to view, he views individual report. When he likes to generate in PDF format for e-mailing or storing, he selects multiple reports and run the report. So that, all the selected reports output should go to one PDF (not to individual PDF).
At one place, we did it through by generating a postscript of each individual report output and clubbed into one PDF. But, it doesnât suits to our current requirement.
Is it possible? Is anybody tried doing it? Please share your ideas and comments.
We use Report Builder 6.0.8.8.3 under Windows 2000 environment.
The whole issue is, after we upgrade our Windows NT to W2K, most of the time, when we invoke reports from Forms, it hangs. Is anybody faced this problem? Any solutions?
Thanks

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

How to publish report output (pdf via XML publisher) on public OAF page

hi,
I need publish pdf file (report created with XML Publisher) over link on OA page on external web, but without accessing people from public web into my output directory for concurent requests (only this one to be allowed to access from external web) ....

sorry, i am late, i couldn't reply on forum ...
first i submit concurent request to create xml output from report (rdf):
ConcurrentRequest cr = new ConcurrentRequest(pConncection);
requestId = cr.submitRequest(applnName, Sablona, Description, null, false, cpArgs);
i am wait for end:
while (FileName == "") {
FileName = getOutputFileName(pageContext,requestId);
getOutputFileName make select to get status of request from database,
and on finish i delive pdf document to customer with oracle.apps.xdo.oa.common.DocumentHelper:
String redirectURL = DocumentHelper.getOutputURL(pageContext,
"XXCS", //appShortName,
Sablona, //templateCode,
(InputStream)dis,
"PDF", //outputType,
properties,
"CS", //language,
"CS" //territory );
pageContext.forwardImmediately(redirectURL, null, (byte)0, null, null, true, "N");
i hope it help you ;o)

Multiple Reports inside one Single Report

Post Author: maximus85
CA Forum: Crystal Reports
Hi....I'm having this problem of having multiple reports inside one single report. Basically what i wanted to built is a Dashboard that contains 4 main subjects:i)Sales - Contains graph that can be drill down for further detailsii)Internal Process - Contains tables that can be drill downiii)Profit/Lossiv)HRAs far as i know, since all four are of different fact table data, they cannot be all thrown inside one single report to be built on. So i came out with using subreports instead for each components and then finally putting them all together as subreport inside the main report(Dashboard).However, i just realized that by doing that, whenever i clicked on the reports that i wanted to drill down with, it will prompt that particular report that i clicked into a new page, and then from there only i can perform drill down.Is there anyway to enable me to straight away drill down the Sales and Internal Process reports from the main reports(Dashboard) instead of having to click twice as that will be unnecessary right?Or mayb if there's another better ways to do what I have to do? Please do advise and suggest......Thanks alot.......

hi chack,
doesnt matter or preferrably both, as long as i can export all the reports in 1 page into 1 excel, or 1 pdf.

Broadcasting multiple reports to one email adress

Dear All,
we have the requirement to generate multiple single reports and to broadcast them via PDF. We have everything working but the individual reports are sent to one e-mail adress, so that one e-mail adress can receive multiple emails. We would like to make the setting that multiple reports are combined in one e-mail per e-mail adress.
Thanks for any help.
Kind regards
Marco
Message was edited by:
Marco Beckers

If possible, try to create a Web application designer with all the Queries in it and execute the report.
Hope this helps!!!

Acrobat convert multiple reports to PDF

Greetings,
I am currently experiencing a road block and not quite sure the best way to solve it.
I have Acrobat Professional 9.0 installed on Windows XP. In conjunction with Microsoft Access 2007 I constantly use the Acrobat Add Ins, which are extremely useful especially the "Convert Multiple Reports" function. This function works great when converting multiple MS Access reports into one PDF file (with bookmarks ), however I need to make this feature more seamless - using Visual Basic I cannot determine how to convert multiple access reports into one PDF file. I am hoping someone has a solution to this? I have thought about using SendKeys to access the Add In function, but this will not suffice since Send Keys do not function with consistency. Is their a .dll function I can refer to as a reference?
Any suggestions would be greatly appreciated.
Thanks in advance,

Hi Meridith ,
If possible please share the file with us so that we can check at our end .
Regards
Sukrit Dhingra

Can I run multiple reports and generate 1 PDF File

Hi
I would like to create multiple reports, run them, and generate 1 PDF output. Is this possible?
Regards,
Néstor Boscán

Hello,
Take a look to the thread :
Re: How to append pdf (Very Urgent plz)
Regards

I am trying to print a snapshot taken from a PDF multiple times on one page.

Reader Will not print multiple copies of a snapshot on one page. I read the help files for Acrobat itself and all it said was take the snapshot and print it. Does anyone know if Acrobat can print multiple copies of the snapshot on one page?
From some reading in another forum page it looks like Acrobat can do it by saving the snapshot repeatedly with different names and the printing all of them at once. I really hate that workaround as I need to do this often.
Message was edited by: duckles10

I tried to do it using Reader. I have a one page PDF document with a UPS shipping label on one side and a special box label with a barcode on the other. This is designed to print on a standard 8.5 x 11 sheet of paper. There are many times when I need to be able to print the box labels more than once. At home, I do it by taking a snapshot of the box label and printing it to a Label printer as many times as I need it. The distributor who also ships items for me only has a full page printer but he can print 4 on a page labels on UPS provided stock. Reader won’t print a snapshot multiple times, the option is grayed out. What I wanted to know is if Acrobat itself can print that snapshot multiple times. I don’t think it can without being able to cut and save that PDF multiple times as separate files. That would be a slow and cumbersome operation. If it would take a snapshot or a single cut and save and print that PDF 4 times on a page it would be a reason to spend the money to buy the program because we need to perform this operation OVER and OVER on a regular basis. On some shipments we might need to print 12 or more extra box labels. We tape smaller boxes together for one UPS label and need to make sure EACH box gets a separate label. Otherwise they sometimes get lost on the other end.
Doing the save 4 separate PDFs process we might actually need TWO copies of Acrobat unless reader can print 4 on a page if it has 4 PDF’s to work from. I have not yet found a good way to save those snapshots from reader. I have tried since I found that it was possible to cut and save them in other formats but not PDF’s as reader can’t save them. The quality of the saved items in other formats is not acceptable. I recently discovered that Microsoft publisher which I have can save a document as a PDF. I’m going to see if I can import to that program next.

One output PDF - multiple reports

Similar Messages

Maybe you are looking for