One point voice mail not sending notification to cell phone

I have been through the prompts to set up one point voice mail and even have entered the phone number to send notification to but never receive and such service. Voice mail does work and the prompt is in place asking for notification number and time to do so but again no such service.

Call your phone number from your phone and when they prompt to change password you can select set up password. You will be able to set your password and review them on your phone.

Similar Messages

Could not send notification 65569 (status 'FAILED')

Customize Workflow runs with 2006 error - only happen in the morning
We have created a customize workflow which works a bit funny here:
When we first run the workflow in the morning, it ends up with this error:
Activity Buyer Notifications
Result Mail
Error Name WFMLRSND_FAILED
Error Message 2006: Could not send notification 65569 (status 'FAILED') to 'CONTRACT SERVICES'.
Error Stack WF_MAIL.GetDocContent(PO_DETAILS_BUYER)
Then, thinking of some problem might happend to the workflow mailer, we run the standard workflow, e.g. PO Approval. It runs successfully and send out the notification email. So, we then run the customise workflow again, and this time it works, no error has been generated as above.
The funny thing is, this had happened more than a week, where every morning I have to somehow run a standard workflow (normally I just create a new PO and send for approval), and got my customize workflow run successfully.
Can someone highlight what's going wrong here?
Is that some setup or soemthing that contribute to this problem?
Thanks,
Patricia

The notifications are defined in the workflow but they do use a document type attribute (we send a table of data "Job", "Job Name", "Amounts").
We have changed the database packages a lot and that created many problems afterwards so we minimized when we make those changes and we restart everything (database, IAS Server) afterwards.
Here is the email to SYSADMIN:
=========================================================
Subject: Error in Workflow DUNAPIN2/20060323123955x30741282 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
From
To SYSADMIN
Sent 03-APR-06
Due
Notification ID 41121
An Error occurred in the following Workflow.
Item Type = DUNAPIN2
Item Key = 20060323123955x30741282
User Key =20060323123955x30741282
Error Name = WFMLRSND_FAILED
Error Message = 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
Error Stack = &ERROR_STACK
Activity Id = 52557
Activity Label = GET_GENERAL_LEDGER_APPROVAL:NTF_V2_AR_DEPT_OFF_MGR
Result Code = #MAIL
Notification Id = 41119
Assigned User = KKEMPER
Workflow monitor
Please click on one of the following choices to automatically generate an E-mail response. Before sending the E-mail response to close this notification, ensure all response prompts include a desired response value within quotes.
How do you want to Continue?
How do you want to continue?: Abort Resolved Retry Request information
=========================================================
Any help would be greatly appreciated.
Jim

Out going mail not sending in mavericks

I've had this problem since upgrading to mavericks, mail not sending and the sntp server showing off line.
I"VE FIXED IT!!!!
Guys hope this helps, the ports show default - 25, 465, 585 in edit smtp settings. Check the next box down - use this port and type in 25, I know its in the default list but its sent my mail when using the custom port.
Hope this helps, I spent all day yesterday on to my server supplier and onto chat with Apple in US but couldnt solve it.
Best of luck!!

For the past few weeks, I have been noticing a similar problem: access to 11 email accounts, and three domains, is blocked on occasion. According to my web hosting company, this is happening because some process was attempting to connect via port 585, an insecure IMAP port; and that an automatic firewall rule was invoked to block those attempts. The blocking would last for about one hour after the last attempt was made to connect.
I'm running Mavericks. If I quit Mail, then restarted one hour later, the problem was resolved. UNTIL Mail attempted to connect to my mail servers, upon which the blocks were triggered again.
I downloaded Little Snitch. It told me, unsurprisingly at this point, that three email accounts were attempting to use port 585 to connect to their mail server. But I DON'T USE IMAP with those accounts! Why Mail is attempting to connect to a port which I haven't configured it to use is the puzzle.
The solution for me: tell Little Snitch to deny any access via port 585.

Exception: Could not send notifications due to Error

Hi experts...
I have configure the Notification Message function for the new task in UWL follow the guide below.
https://help.sap.com/saphelp_nwce711/helpdata/en/e4/32ff7865fa483dba3686160f5c6dd0/frameset.htm
It does work on the server (BPM/CE7.11) in my office. (CE install in VMware along with mail Server, use same IP: 8.8.2.180)
But when I do the same thing on client's side, it just doesn't work out. (use the same VM instance, but in different Network environment)
I list the detail info. of settings and exception below:
For BPM Mail Server Connectivity:
host: 8.8.2.180 (also try bpm.hjoy.com.tw)
user: jason
e-mailAddress: jason @demo.hjoy.com.tw
PSW: goodtry
For BPM Notification Messages Configuration:
Mark both option
URL: http://bpm.hjoy.com.tw:50000
Could not send notifications due to Error: (Failed in component: sap.com/tcbpemtmear, BC-BMT-BPM-DSK) Exception raised from invocation of public int com.sap.bpem.tm.notification.MailNotificationSender.startNotification(com.sap.bpem.tm.adapter.Action,com.sap.bpem.tm.ITaskInstance) throws java.lang.IllegalArgumentException method on bean instance com.sap.bpem.tm.notification.MailNotificationSender@1a44705 for bean sap.com/tcbpemtmearannotation|bpemtmejb.jarannotation|MailNotificationSender in application sap.com/tcbpemtmear.; nested exception is: javax.ejb.EJBTransactionRolledbackException: (Failed in component: sap.com/tcbpembaseear, BC-BMT-BPM-DSK) Exception raised from invocation of public void com.sap.bpem.base.mail.MailSenderBean.send(com.sap.bpem.base.mail.IMessage) throws com.sap.bpem.base.mail.MailException method on bean instance com.sap.bpem.base.mail.MailSenderBean@14d43e4 for bean sap.com/tcbpembaseear*annotation|bpembaseejb.jar*annotation|MailSenderBean in application sap.com/tcbpembaseear.; nested exception is: com.sap.bpem.base.mail.MailException: javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 554 User unknown
Please kindly help me for this...

Good day! I configured the notification but I stack with a problem.
There is an error in logs:
Could not send notifications due to Error: {...} nested exception is: com.sap.bpem.base.mail.MailException: com.sun.mail.smtp.SMTPSendFailedException: 550 authentication required
But I've entered the login and the password to the smtp. Where can I find a reason of the error?
Also I tried to configure notification service using the link http://help.sap.com/saphelp_nwce711/helpdata/EN/e4/32ff7865fa483dba3686160f5c6dd0/content.htm, but when I try to configure tcbpembase~ear service there is no edit button and the column "Modifiable" has no check. What it can be?

When I am sending one message, mac mail shows sending several (6 last time), is it virus?

when I am sending one message, mac mail shows sending several (6 last time), is it virus?
mac mail also freezes from time to time and closes for no reason

It is not a virus. It's a bug in Mail that fails to reset that count, so it keeps incrementing each time you send a message. When it says it's sending 6 messages, that really just means you're sending the 6th message since you last opened Mail.

Since moving to iCloud my mail not sending attachments any answers?

Hi
Since moving to iCloud my mail not sending attachments any answers?

After the migration I started having problems with all NON Apple things.
Now, as of July, 6th this is my situation:
Lion devices and iOS5 devices (MacBook, MacPro, iPhone 4s and iPad I) - fine
have a look here for info:
AUTOMATIC SETUP FOR APPLE MAIL ON LION MACS
http://www.apple.com/icloud/setup/mac.html
Snow Leopard - set up after some trouble using these instructions:
OLDER SERVER FOR APPLE MAIL ON PRE OS 10.7 MACS
http://support.apple.com/kb/HT5330
Non Apple clients should work with these instructions but I still cannot get MailForge to work:
SERVERS FOR GENERIC EMAIL CLIENTS
http://support.apple.com/kb/HT4864
MOBILE NON APPLE STUFF
With my HP (Palm) Pre 3 I am still figuring out why every single day they change the servers:
this however might help you as the Palm is more similar to the BB than the iPhone:
PALM PRE 3 SETTINGS: I also have updated the password on iCloud, deleted the old iCloud account on the Pre, created a new one. Please note that it now sends using the older server, I do not know for how long.
INCOMING
OUTGOING

Installed i0S 8 and now my iPhone 4s voice mail not working

installed i0S 8 and now my iPhone 4s voice mail not working

Well, what happens when you try to use it. That would help in the troubleshooting. Have you contacted your cellular carrier? Voicemail is a carrier function.

Sharepoint 2013 designer workflow mail not sending

Hi
I am doing sharepoint 2013 workflow for mail sending using designer.
I am sending mail when new item created in List.
Here status is completed, but mail not sending the following error comes
"The e-mail message cannot be sent. Make sure the e-mail has a valid recipient".
But i have valid email ID.
If i am sending mail through C# (Visual Webpart), mail sending properly.
Give me solution, Thanks in advance

Can you please check the below threads
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3c76459c-01f5-4d75-be17-ee5b2ce1c1dd/sharepoint-designer-2013-workflow-not-sending-emails?forum=sharepointgeneral
http://social.technet.microsoft.com/Forums/sharepoint/en-US/caee58c6-3128-4241-92e2-62f1d0bff01f/sharepoint-workflow-not-sending-e-mail?forum=sharepointcustomizationlegacy
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answeron that post andVote as Helpful

In iOS 5 on the iphone 3gs, how does one disable voice control, not voice dailing. I have never wanted or used voice control please help me disable it.

In iOS 5 on the iphone 3gs, how does one disable voice control, not voice dailing. I have never wanted or used voice control please help me disable it.

are you talking about voiceover where the phone is reading things out loud to you? you have to double tap things in voiceover in order to select them. you'll need to go to settings > general > accessibility > and turn off voiceover there

Apple mail not sending via my server hotmail.

apple mail not sending via my server hotmail. Please help

How would you like us to help when you don't provide any details. We don't have a crystal ball.

All of a sudden this morning my iphone will not send imessages from my phone number but only from my email address. When I go to the settings for my imessages to choose where they are coming from my phone number is greyed out....Is there a way to fix this

All of a sudden this morning my iphone will not send imessages from my phone....

Hi Chas869,
Hmm, that is strange that your phone number is greyed out. There are a few things that we can try. First would be to turn iMessages off, then back on. See if you are able to select your phone number. Then if that doesn't work, turn iMessages back off, then reset the network settings....settings>general>reset>reset network settings, this will reboot the phone. Don't worry, it won't delete anything from the phone, it simulates a battery pull. Once the device comes back on, then turn iMessages back on. Keep us posted if that works!
ErinW_VZW
Follow us on Twitter @VZWSupport

Verizon Safeguards "Not available for this cell phone number"

I just learned from your support rep, that Verizon Safeguards service does not work with the iPhone!. Under my Services under Verizon Safeguards, I get the following message: "Not available for this cell phone number". You gotta be kidding me Verizon...really.
I want to be able to use Verizon Safeguards and block calls a txt from specified numbers, like I have with every other phone I've had with Verizion!
PLEASE, ADD SUPPORT FOR THE iPHONE.

pwk wrote:
I just learned from your support rep, that Verizon Safeguards service does not work with the iPhone!. Under my Services under Verizon Safeguards, I get the following message: "Not available for this cell phone number". You gotta be kidding me Verizon...really.
I want to be able to use Verizon Safeguards and block calls a txt from specified numbers, like I have with every other phone I've had with Verizion!
PLEASE, ADD SUPPORT FOR THE iPHONE.
This is apparently a known issue, there are a few other threads on here. But I had a chat on here with a Verizon rep who said that they personally had numbers blocked on their iPhone4 and that it had to be done through Customer Care, which if you log on to MyVerizon, the number is under Support --> Contact Us. Who knows if it actually works.

Does any One has List of MIDP 2.0 Enabled Cell Phones

Does any One has List of MIDP 2.0 Enabled Cell Phones
and from where to Download it
i think the later part is Diff
i need especially for SAGEM,LG,PANASONIC,ALCATEL,ORANGE

Thanks SIR
for that .com but i need the SDK for Sagem,Alcatel,LG
i have got for Simens , Nokia, Moto,Sony
Thanks

IPhone mail app not sending notifications

I use the mail app for iphone to check my college email,
usually it sends notifications when I receive a new messege but it is not sending any more (No sounds, no banners, no badges),
Although the email app is in Notification Center when I check it in the settings
Is that beacuse I Use IMAP Not POP ?

If Mail is in the notification center and the badge icon is on, alert is on, and ect... Try to reset your device holding home and sleep/wake button; Wait til the Apple logo appears and then let go of the buttons and wait for reboot. Has nothing to do with what type of email account you are using.

Notification mail not send

Hi All,
I have an issue in PR workflow.A notification mail is send to user to approve a PR,but the user says that he did not receive that notification mail.He manually goes to transaction & approve the PR & workflow gets completed.
Please let me know how to find out the cause of this problem.In my workflow log it shows workitem approved by the user.
What can be the cause that notification mail is not send.The user email id is maintained in su01.
Please help.
Thanks in advance

Hello,
You wrote:
"As he executed that step manually ,automatically the workitem got deleted from the user inbox"
This is not something that happens automatically. Is the workflow listeing out for an event which tells it that the activity represented by the step has already been done?
I assume you mean the user performed the operation that was supposed to be done via the workflow step, not that he performed the workflow step itself. If the workflow log shows that he did perform the step, then the user is mistaken.
regards
Rick Bakker
Hanabi Technology

One point voice mail not sending notification to cell phone

Similar Messages

Maybe you are looking for