One user invisible via CUPS Federation
I have one user whose status is not visible by users that are connected via Federation. Users within the same cluster can see his status normally. And he can see others, both locally and across a Federation connection. However, when someone in another Federation adds him, they see nothing. No error, no blocked symbol, just a grey ball. I can see nothing different about this user, other than the fact that he is the only user in the organization using Vista (everyone else is XP or Win7), but I have logged him into a different computer and the same thing happens.
Under Privacy | Manage Domain, all Federated Domains are set to Ask. When others add him, he gets no notification. So I'm at my wits end. And this is the only user that is desplaying this problem.
Update: It's apparently only his online/offline and Exchange status that is not visible. Remote users can see when he is on the phone.
Similar Messages
-
How to get one users meetings via admin login
I need to get a list of meeting rooms that the user is a
participant/host/presenter in.
In all the documentation I look at, it always suggest to use
"report-my-meetings" while logged in as the user. This really isn't
an option for the system that I'm building. I am logged in through
an account that has full administrative access, but I'm having a
tough time finding out what to pass to accomplish this.
Any help would be appreciated, thank you.To my knowledge (and I have looked for this type a data a few
times), there are no reports that ever differentiate a user as a
participant/host/presenter directly. I think the reason is because
users sometimes are promoted and demoted within a single meeting?
That is not to say a custom report couldn't be made, but either the
XML API (probably not) or directly from the MS-SQL DB on a licensed
installation.
A small nuance to be aware of is, whenever you see a report
that gives the users email address, you know that they are a fully
qualified Connect user. When the email is not there in the report
and only a name is given, they are a "guest". Also, if you assign
yourself as someone's manager, then go to "Manager Reports" link
found on the homepage, you will get a manifest list of all of the
meetings attended by the staff member you assigned under you.
Sadly, that report only gives the meeting room name, time-in &
time-out. To find-out what there roll was, you'd have to find the
meeting in the Meetings tab and look under the permissions link.
Real bummer the report you want doesn't come pre-built with
Connect. Silly, in fact. If you really need this made for you, PM
me and I can see if our engineers could access this
indirectly. -
Multiple itunes accounts via one user on imac
I have an iMac that has iTunes loaded and many of our devices are associated with one iTunes account. I also have a business iTunes account with a separate contact list, music, etc. Is it best to just setup a new user on my iMac and sync it there or is it possible to sync it under one user account?
Is there any way Apple can remove the 90 day block, since I am legimiate owner of two accounts?
Kento,
I am afraid that your approach will not be viewed as legitimate. The Terms and Conditions of the iTunes Japan Store state:
"The iTunes Service is available to you only in Japan, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. iTunes may use technologies to verify your compliance."
The accepted way to do what you are doing is to have a single account, and change the country according to where you physically are. -
How do I move all my files from one User Profile (account) into another?
I needed to create a new account and want all of my files accessible in the new one.ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
the start of that tree is /
so, if you were to do:
cd /
(cd means change directory)
it will bring you at the highest branch of the file system.
cd /Users
will bring you to where all the users are.
to see whats in /Users you can use your friend ls command
ls means list files/directories
so:
cd /Users
ls -la
(the -la here means show all (even hidden) and long format (very verbose)) this flag is very optional.
you will see
fred
user2
for example.
if you want to see the desktop of user2 you would change directory to it then list the files.
for example:
cd /Users/user2/Desktop
Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
ls -la
you should then be able to see everything in users2 desktop
you could have done as well the same thing in smaller steps, for example:
cd /
cd Users
cd user2
cd Desktop
this is the equivalent of cd /Users/user2/Desktop
So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
/Users/user2
which most likely the file you had created from the other user was in /Users/user1
if you copied all the files from /Users/original_user to /Users/secondUser
most likely yes, all your mail, bookmarks etc would be copied over.
so in your case.
sudo chown -R seconduser:staff /Users/secondUser
should work
Remember that if you start a path with the character / it means start from the root of the file system, at the highest top you can ever get.
so
cd /Users/fred
is not the same as
cd Users/fred
unless you were in / already
i know it may be confusing at first but it's actually very logical if you play with it.
to simplify, think of it that / means C:\ on windows
you can't go any higher than C:\ (in a way)
if you're unsure which directory you're currently in, you can always type:
pwd
it will tell you where you are.
for example:
cd /
pwd
this shows /
cd Users
pwd
this now shows /Users
cd /System/Library
pwd will show /System/Library
cd /
cd /Users
cd fred
cd Library
pwd will show /Users/fred/Library
unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
ls -la (this shows all the files where you are)
if you see myfile in the list
do a pwd
whatever is return, the real location of the file would be:
whatever pwd returned / myfile
I hope that makes sense. -
How do I move imove content from one user to another on the same computer?
We bought our Macbook pro about six months ago. We made the mistake of creating two users for it (my husband and myslef) but bow we only log in under my user name. The problem is we originally imported all of our video camera content to his "log in" and now it is in his imovie folder, and not mine. I want to make a movie on my log in with the fottage that we imported to his. So, how do I get video content from one users login on the SAME computer to the other log in users? I cannot seem to move it for the life of me. I did not expect this to be so difficult.
Hi,
You need to log into his account and look, under the Movies folder, for iMovie Events. Inside, you'll find folders with the events names and still further will be the movie itself. Copy each to an external media or use the Shared folder so both accounts can reference them.
Another option would be to attach an external HD and via iMovie (Events Library pane) move them to the new disk. You would preserve the thumbnails and analysis already performed on the videos.
Good luck! -
Copying iTunes Library from one user account to another on the same MacBook
I recently purchased a new Macbook running 10.4.8 and transferred my iTunes library from my G5 via firewire.
The problem is that I started using one user account and
when the library transferred over it went into another
user account. Is there a way that i can take the library
and put it under the user account that i had established
prior to the transfer or do i have to import each MP3
(via the HD) separately?Does this article contain anything useful?
(20198) -
Problem accessing hard drive for more than one user at the same time
Hello all,
I recently bought a 2nd generation AirPort Extreeme 802.11n to replace a cheapo wireless router. The main reason I wanted to get the AirPort was so I could attach a USB hard drive which holds iTunes music files Originaly I had a G4 MDD and this was a second internal hard drive. Since my wife and son also share my Mac, we stored the iTunes music folder there, so we could all access the files. That worked fine.
Then I got a early 2009 iMac and gave my wife the G4. My son also has a G3 iBook, using the wireless internet conection. At first I had the drive in an external case attached via Firewire. Both my iMac and my wife's G4 are attached to the network using ethernet, not wireless. She was able to access the music files so long as my Mac was on, but the connection was flaky.
So as mentioned, I picked up a used AirPort Extreme from OWC, mainly to attach the hard drive, since it's no longer in my Mac. It took some fiddling, and I was honestly surpsied that the APE was trickier to set up than expected, but now I have the external drive mounting, and we can all access the files from any of the Macs in the house. It works great except for one thing. If I'm logged into my iMac, and then another family member logs in on the same iMac, we don't all have access to the hard drive. It's still mounted, but the you have no permission to view the files on it.
Then if I remount it, I can access the files, but now the other user can't.
So in a nutshell, only one user can access the drive at the same time from the iMac, but we can all access it from different Macs.
Anyone have an idea of why this is happening and how to remidy it?This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost. -
I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on my iphone
Quote: "You cannot merge two or more Apple IDs into a single one. You can, however, use one Apple ID for iCloud services and another Apple ID for store purchases (including iTunes in the Cloud and iTunes Match). See “Using one Apple ID for iCloud and a different Apple ID for Store Purchases” above for details." See also Apple ID & iCloud FAQ: http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US
You can set up your iCloud account on your iOS device under: "Settings > iCloud" and a other account for store purchases under "Settings > iTunes & App Stores". Unfortunately merging accounts is not possible but you could transfer all of your music manually via iTunes from your Mac or PC. -
Audio only working for one user at a time - flash is the cause
but what is the solution?
OSX 10.6.8
flash player 10,3,183,10
If one user is listening to something via some kind of web (flash) media player, and the other user logs on, then this 'new' user is unable to listen to anything at all - all audio is blocked - not just web stuff
I know flash is the cause as I can go to task manager and kill the other person's flash plug in and the sound comes on instantly
I've tried reinstalling but no joy
How can I fix this?I've reinstalled flash and checked that I have the latest version but this is getting ridiculous
Everytime I want to use skype or itunes or iplayer, I have to log in as the other user, close down all their web browsers, then go back to my account to get it to work, much to the annoyance of the other user.
Flash now: 11.1.102.55
OSX: 10.6.8 -
Error while trying to assign a role via CUP in Portal
Hello Experts,
I am trying to create a request to assign a role in EP via CUP ( 5.3)
EP Connector is working fine as I have imported Portal roles etc
SPML service is working fine
I have done the mapping in the Provisioning tab for Portal system
logonname in portal is email address of an employee
So the I have done the following mapping
AC Field Application field
email addres-Stndard logonname
And I have the following error while trying to create a request which I grabbed form the log
ERROR Exception during EJB call, Ignoring and trying Webservice Call
LinkageError: loader constraints violated when linking com/virsa/cc/xsys/webservices/dto/WSRAInputParamDTO class
ERROR com.virsa.ae.core.BOException: Exception from the service : Invalid System
com.virsa.ae.core.BOException: Exception from the service : Invalid System
ERROR : BO Exception in Save request
Any suggestions would be really appreciated
Regards
KevKevin,
I was able to replicate your issue and there is a setting in the CUP that you have to disable, Goto the config tab in the CUP and select NO for the "Risk Analysis On Request Submission " under risk analysis.
Issue here is you did not create a connector for your EP in the RAR, I believe you have the above mentioned parameter to yes and so when you are submitting a request CUP is trying to do the risk analysis but RAR was not able to find any System, so it is thowing an error.
You can resolve this issue in two ways, one is to create a connector in RAR or the other is to disable the setting in the CUP.
Hope this helps.
Naveen -
Mobile account on laptop will no longer connect for one user
I have a set of laptops with user accounts set up on them as mobile accounts. This morning one user stuck in his username and password, and the login panel went away and the "purple stars" came up, but it hung there and didn't continue and log him in. After about 5 minutes he got tired of waiting and hit the power button on the laptop. When it rebooted, the usual login panel offering his name, the local administrator account and "other" was missing his name -- just the admin account and "Other". Then he came to find me...
If I go to "Other..." and ldap is green light, and put in his username and password, it shakes it's head like he doesn't exist. I've tried all of the usual tricks back on the Open Directory server -- turn his account off and back on, change the password save change it back, etc. I have compared the setup with several other users who work just fine, and I can't see anything different. I have even logged in with my account (which is not set up for mobility) and it takes the username and password and refuses after a certain point in the login. When I log in with other mobile accounts, it logs in and gets as far as offering to create a local directory (which I cancel out of.) So it's just this one user's account.
When I log in to the local admin account and run system prefs and go to accounts, his account is there and shown as type "mobile". His directory is there, and an 'ls -l' on it shows that he owns it. I've run the directory utility, and everything looks great -- and I can log on via ldap with the other accounts. If I break ldap connectivity by turning off the airport and unplugging the ethernet cable, the light goes red and then the only option on the login panel is the local admin account, not the lodmin plus his account in local mode.
Anybody know what's broken? Evidently the mobile accounts don't like to be powered off in the middle of a login! Anybody know if there is some lock file somewhere that I needs to be deleted?Hi @TSimo,
Welcome to the HP Forums!
I wasn't able to find much on a Photosmart 7420, did you perhaps mean Photosmart 7520?
If that is correct, this may just be a case of needing to reconnect the printer to the wireless network again due to the upgraded router and extender
To do this, please restore the network defaults on the printer (press the wrench on the printer's touch screen, select Wireless, then select Restore Network Defaults, should be the last option) and once that completes go back to the same Wireless menu on the printer and run the Wireless Setup Wizard on the printer. This will update the connection on the printer itself.
After this completes you will need to remove the driver and re-add it on the computer. How this is done depends on the operating system, so if you're not sure how to remove the driver and re-add it, please let me know which operating system you use and I will get you some instructions
Hope to hear from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP -
After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.
We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning. -
Problem opening pdf's with one user
Hello,
We deployed adobe reader X on a terminal server 2008 with about 10 users, which login directly via an rdp session (no broker).
With one user, we have the problem that when she tries to open a pdf (either directly, in a browser, from outlook, whichever),
then the adobe reader program appears in the taskbar and then the program is gone. We tried the following things
- Kill the adobe reader process
- Repair adobe reader using the software install tool
- Downgrade to adobe reader 9.4.1 by uninstalling X and installing 9.4.1 (a version which is used extensively without problems at another customer)
- Delete the terminal server roaming profile and create a new one in active directory on the domain controller.
Other users have no problem with this and a testuser with the same rights (copy function in AD) does not have this issue.
Every time we apply one of the above solutions, it works for 15 minutes and then we are back to the original symptoms.
The adobe reader process seems to be still active after you close a document and after it stops working.
Does anyone have a clue on how to fix this permanently?This is a problem (bug) with the built-in PDF Viewer (pdfjs) that currently doesn't handle this link properly.
*http://starkhealth.org/enviro/GRADE%20A%20FOOD%20EXCELLENCE%20AWARD.pdf
I've seen issues like this before, but can't find a bug about this issue. -
hi
i'd like to ask for help.here is a brief introduction.
i publish a web project on a server(the name,"server-deploy"),(it connect with sql server datavvase with connection string of database "Trusted_Connection=Yes",with web config file <authentication
mode="Windows" /> <identity impersonate="true"/>
there are some users whose Impersonae_clients_after_authentication are enabled. and most of them can connect to database via the deployed project .
but one user,he was told 'NT AUTHORITY\ANONYMOUS LOGON', and according to even viewer("security of "windows log") of "server-deploy",it shows "Audit failure"(the Task category is "credential validation")
and here is some information
[ Name] Microsoft-Windows-Security-Auditing
EventID 4776
The computer attempted to validate the credentials for an account.
PackageName MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
TargetUserName (user)
Workstation (Workstation)
Status 0xc0000064
while when other user do login ,there is no log whose Task category is "credential validation".
COULD ANY ONE CAN DO ME A FAVOR TO HELP ME?ANY HELP IS APPRECIAT. THANK U VERY MUCH IN ADVANCE :)
best regards
martinand i made a small windows form application here
private bool impersonateValidUser(String userName, String domain, String password)
WindowsIdentity tempWindowsIdentity;
IntPtr token = IntPtr.Zero;
IntPtr tokenDuplicate = IntPtr.Zero;
if (RevertToSelf())
if (LogonUserA(userName, domain, password, LOGON32_LOGON_INTERACTIVE,
LOGON32_PROVIDER_DEFAULT, ref token) != 0)
if (DuplicateToken(token, 2, ref tokenDuplicate) != 0)
tempWindowsIdentity = new WindowsIdentity(tokenDuplicate);
impersonationContext = tempWindowsIdentity.Impersonate();
if (impersonationContext != null)
CloseHandle(token);
CloseHandle(tokenDuplicate);
return true;
if (token != IntPtr.Zero)
CloseHandle(token);
if (tokenDuplicate != IntPtr.Zero)
CloseHandle(tokenDuplicate);
return false;
and here is the code of buttonclick
if (impersonateValidUser(user,psw,doman))
if (!System.IO.Directory.Exists(this.textBox1.Text))
MessageBox.Show("not exist with imper");
else
MessageBox.Show("exist with imper");
undoImpersonation();
else
MessageBox.Show("fail login.");
and i was told "exist with imper"(usually if Impersonae_clients_after_authentication is not enaled would told "not exist with imper" ) -
Lumia 520 "Remote wipe of user data via Internet"
I'm interested in purchasing a Lumia 520 and read on the spec site that it can do "Remote wipe of user data via Internet" (http://www.nokia.com/in-en/phones/phone/lumia-520/specifications/).
Is there any special software that I need to be able to do this (like have it connected to a BlackBerry server in the case of enterprise BlackBerry devices) or is it as simple as stated on (http://www.noknok.tv/2013/05/02/how-to-find-your-lost-nokia-lumia-running-windows-phone-8/) where all you have to do is log into windowsphone.com where you can erase a linked phone?
This phone will be used for business so in case it is lost I need the ability te remote wipe it. Our company currently has a BB server and we all have BB devices, but with BB not doing so well I was thinking of getting a Nokia.
Thanks.
Solved!
Go to Solution.WHNOKLUM520 wrote:
So far so good. That's great news. If I could ask one follow up question though:
Would it matter if the same SIM is installed on the phone? Lets say the 'thief' was able to get into the phone with a different SIM (if the security was not setup correctly) - would the phone be erased based on the SIM that's installed or on the IMEI number of the device?
Thanks
If there's no data connection, windowsphone.com cannot access your phone to send push notifications and if push notifications fail, then it will try to send SMS to your phone.
I just tried to ring my phone after taking out the SIM card, it was connected to wi-fi and I could ring it.
The silence will fall
Maybe you are looking for
-
Transactional behaviour in third party - XI idoc scenario
Hi, a third party system is sending an idoc via TRFC-call with the function module "IDOC_INBOUND_ASYNCHRONOUS" to the XI-system. The scenario is working fine, but one day the XI table space was full. The third party systems gets the following error m
-
Copying logical database from one server to another
Hello All, I have one logical database name as KDF in my test server which has become inconsistent due to some reason . In my live server tht logical database is consitent now what is the option to copy the same from my live server to test server . I
-
On or after January 1, 2013 (that was the last day that it worked), I lost the ability to text pictures to a non-iPhone user. Can you help, because my daughter misses the pictures. If it matters, I am on AT&T and my daughter on Verizon Wireless.
-
Silverlight Tool for debugging and inspecting UI created dynamically from Styles
We have a Silverlight grid. In the grid style xaml, in row header style, I am creating a custom grid column header with an arrow on the click of which it renders a list box control with columns name and check boxes to select. This list is populated f
-
Cheapest legal place to buy Photoshop CS5 in UK
Hi all, I want to buy Photoshop CS5, and I am in the UK. Does anyone know what the cheapest legal shop or on line store is in the UK. Amazon UK is £ 546-00 which is a lot cheaper than via the Adobe site which is £ 657-00! All I want is a serial numbe