Online issue with the radio

I can listen to the radio on the internat but after 30 min off it shut down and i have to reset why? help anybody

Audition works internally on wave files, so it converts the mp3 to wave as it loads.
Here is what I think is happening. A 16-bit wave file uses just over 10megabytes per minute, so a 3.5 hour stereo wave file will be just over 2 gigs in length.
The maximum length of a wave file is 4 gigs. If the wave file is recorded at a bit depth of 16 bits, it will fit into a single wave file, if it is recorded as a 32-bit wave file it won't.
Internally, I understand that Audition can work with wave files larger than 4 gigs, although I cannot vouch for this. If this is the case, I would expect that if you set the session parameters to 44.1kHz, 16-bit, and then loaded in the mp3 file, it might work. If the session file is set to 32-bit, it wouldn't.
What I don't know is whether the session parameters can be or are altered by whatever the headers of the mp3 file are reporting.
The bottom line for me is that you need to think about dividing up a 3.5 hour program into smaller files for editing within Audition.
It would be useful to have a definitive guide to this ffrom Adobe.

Similar Messages

How do I fix the buffering issues with the radio app?,

How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?

msbroome wrote:
How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?
What is your Internet data rate?

Issues with the Radio Group and interactive report

Hi,
I have an interactive report that shows customer names and associated revenues... I want my users to be able to filter customer list by Province and by City in a way that when the user select a province then only associated cities show up (driven by a table)... for the filtration I am using 2 Radio Group items (one for Provinces and the other one for Cities)
Everything is working fine, except for the fact that when I select a province (let's say Prov A) and then select a city (let's say City A1) and again when I select another Province (let's say Prov B) I get the list of all cities associated to Prov B + city A1... Not sure why my previous selection of City is showing up with the list of new cities when I change the province... I SHOULD BE ABLE TO REST ALL CITIES WHEN A NEW PROVINCE IS SELECTED
here is the code
For interactive report
select     CUSTOMER_NAME,
     SUM(YTD) AS YTD
from     T_TABLEA
where
(PROVINCE=
CASE
when :P2_PROV = 'All' THEN PROVINCE
ELSE :P2_PROV
END
and
(CITY=
CASE
when :P2_CITY = 'All' THEN CITY
ELSE :P2_CITY
END
GROUP BY CUSTOMER_NAME
For Province Radio Group I am using a static list:
STATIC2:All;All,Alberta;AB,Ontario;ON,Quebec;PQ,British Columbia;BC
For City, I am using a dynamic list using following code:
select 'All', 'All' return from dual
union
select distinct INITCAP(CITY) display_value, CITY return_value
from T_TABLEA
where
Province = :P2_PROV
order by 1
Thanks

Check the session state of items P2_PROV and *:P2_CITY* when the issue occurs and run the LOV query separately with the session state values.
If that too fetches it wrongly, then you would need to change your query.

HT4623 iOS 8 version 8.1.2 issues with the calendar displaying wrong TIME ZONE!

I just updated to iOS 8 using version 8.1.2 and am having issues with the calendar. I use my GMAIL calendar and sync to my iPhone and now any calendar entries that I add from my phone display the current time zone AND GMT time. Entries that were already there display correctly. New entries entered from the GMAIL calendar also display correctly. The issue is with NEW entries entered on my PHONE into the calendar. This is very annoying and causes problems for new entries that need EDITED. Once opened to edit it defaults to GMT time! WRONG!! I have turned off the automatic time zone feature and Time Zone Override in Settings but it's still WRONG! There are multiple reports of this online so I would like to know when/if it will be corrected or if there is a fix! Please help!!

Quite the same problem here, GMT, UTC.......
Why when they do an update they don't check it completely???

Previous computer crashed without my Adobe CS3 Design Standard for Macintosh application being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help!

Since the previous computer crashed without my Adobe CS3 Design Standard for Macintosh applications being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help, I've tried using the online "contact us" with no success, unable to get in contact with a tech support agent that can assist me.

CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.

I am trying to "personalize my cs2 software online download with the serial number from my original boxed cd set and it didn't work. I tried using the download serial number and that doesn't work either. Need help!

I am trying to "personalize" my cs2 software online download with the serial number from my original boxed cd set and it didn't work. I tried using the download serial number and that doesn't work either. Need help!

I understand that you have also used the download link & serial number from Adobe - CS2 Downloads, if still the CS2 is not working, then please refer to the system requirement for e.g System requirements | Photoshop
The issue can be that the present operating system might not be compatible with the CS2.
Regards
Rajshree

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

Frequent issues with the contacts

Hi,
Everyday I face issues with the contacts. It does not search the contact I wanted to look and stuck on the first page of the list for few seconds and then move to the searched contact. But when I open that contact, it shows the contact details of first name of my conact list, not the one I searched. It is irritating and happens everyday.
Only way to resolve this is by restarting the device or power off and ON it.
Does anyone face this. Is there any solution availble for this issue.

I am a real estate broker and I have 1200 contacts and when I transferred the contacts from my old BB Torch to z10, the transfer was successful and all my contact fax numbers are listed as fax. BB has announced that they are going to have USB Outlook sync in the future release of BB link. I am eagerly waiting just like you, it is important part of my business and online cloud sync is not an option for me. I currently email my contacts from my desktop to my z10 as a .vcard and update any new contacts.. Same with the calendar. You can also save it on your sd card. A temp solution until the feature is available. or use outlook.com or other cloud service.
To add a fax to your contact, open the contact in edit mode, click on add field and select fax.. You also have a choice to set fax work, home , direct or other.

Hp Envy X2 issues with the touchpad gestures

I am experiencing some issues with the touchpad gestures after every time it wakes up. I am already update the drives posted in the hp web site, is anybody out there with the same issues?

I couldn't find any graphic drivers for that notebook, but here is an updated chipset that is available for your notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114872-1&cc=us&dlc=en&lc=en...
It was released 6 days ago, so it might enable that option for you. It can't hurt to try it out. If not, you might just have to hold out a little bit until they update the driver.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Anybody else having issues with the new 1.1??

For some reason, I have encountered two issues already.. Whenever I'm exporting my galleries as web pages, nothing happens! It creates a null folder that I specify but then doesn't export any photos or html pages.. If I delete the folder and do it again, the exact same way, for some miracle it then begins to export.. There is no logical explanation and its clear that its a bug..
Also, when exporting multiple images into CS2, that also fails for me.. It only opens up one picture and even though the others are selected, it doesn't seem to do the trick.. Its not my computer because i have a brand new quad w/ 4 gigs of memory.. I didn't encounter either of these issues with the older version..
Anybody else??

I tried both, and was successfull both times.
External Edit:
1. I selected 2 images (D200 RAW images).
2. Right clicked to get the contextual menu and selected Open with External Editor (I have my prefs set up for Photoshop).
3. Both images opened in Photoshop.
I can't image it being system specific. What camera and file type are you using?

Issues with the Surface Pro 3's pen in Photoshop CS6

I used photoshop CS6 with no problems on my old computer that was connected to a graphics tablet.
However, I recently bought a new windows computer called the Surface Pro 3. Everything works perfectly with the trackpad and touch, but I've had some issues with the Surface pen.
The pen can draw on the canvas, but whenever I click something on any of the windows with the pen, the entire application freezes and I would have to click the computer's taskbar at the bottom to unfreeze the application.
It's impossible to work like this. Is there any solution to fix this problem? It says that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

If you have Photoshop CS6 version 13.1.2 which is the Subscription version of Photoshop, You shoule Isstall Photoshop CC 2014 on your surface Pro 3. It will work without problems on the surface Pro 3 and you will also have the option have the option to use Photoshop CC 2014 preference 2x UI to scale Photoshop's UI up in size on your Surface Pro 3.
If you do not have a subscription the Perpetual version of windows CS6 should be version 13.0.1.3. In that case the only way to scale Photoshop UI is to have windows do it. You would need to to update your windows 8.1 registry and add an external Photoshop manifest file in your Photoshop CS6 folder. To get the Surface Pro 3 pen to work with Photoshop you would need to install NTig pen device drivers the support the wintab APIs.
You will not be able to use Photoshop without a keyboard popping up the windows onscreen keyboard is too cumbersome. You can use a utility like Touchkey to create Overlay touch keys on Photoshop and use Photoshop without a keyboard.
The differece betweek Adobe 2XUI scaling an windows scaling ise windows scaling scalet the image areas as well as the Photoshops UI
A couple of touchkey overlat keyboards could look something like this

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks

Design issue with the multiprovider

Design issue with the multiprovider :
I have the following problem when using my multiprovider.
The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
And from another s-system I am also loading the masterdata for IobjectA
Now I have created the multiprovider based on the cube and IobjectA.
However, surprisingly join in not workign in multiprovider correctly.
Scenario :
Record from the Cube.
IObjectA= 1AAA
IObjectB = 2BBB
IObjectC = 3CCC
Records from IobjectA =1AAA.
I expect the record should be like this :
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
However, I am getting the record like this:
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
1AAA         : #             :#
In the Identification section I have selected both the entries for IobjectA still I am getting this error.
My BW Version is 3.0B and the SP is 31.
Thanks in advance for your suggestion.

May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
My Expectation from Multi Provider is :
IObjectA
1AAA
(From InfoObject)
Union
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
(From Cube)
The record in the multiprovider should be :
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
Thank you very much in advance for your responses.
Best Regards.,
Praveen.

Issue with the App Store showing up blank.

Issue with the App Store, it will not let me search for new apps. The screen is blank. The update section and features section works, but it will not let me search for new apps. I have restarted my phone and no changes. The newest update to the iphones when the iphone 5 came out, i think, messed up this app. When i am looking at how to fix it, it tells me to delete it and try again, but the App store is not a deletable app. Any ideas why my App store, specifically the search section of this app doesn't work?

I suspect it is on Apple's side of things. Mine was blank too, but now it works again. Fixed itself one morning.
https://discussions.apple.com/message/19659161#19659161

Performance issues with the Vouchers index build in SES

Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?

Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES>

Online issue with the radio

Similar Messages

Maybe you are looking for