Only overall result need tp be displayed after query execution
Hello Everyone,
I am requirement on query analysis " OVERALL RESULTS". The scenario is explained below.
I am dealing with BW HR Reporting. Now if i execute the query from 2008. 01 to 2008 03. The Result will be displayed for 2008.01, 2008.02, 2008.03. and atlast the overall result. The requirement is , after executing the query for the calday 2008.01. to 2008.03 , i need to get only the OVERALL RESULT". The details of the individauls months will be taken care at the jump target level.
Can somebody give th inputs from your end, so that only the overall results will be displayed.
Appreciate your immediate response. Thanks in advance.
Regards,
pradeep
Hi
How about suppress results on the characteristic properties
Regards
Similar Messages
-
"Variable applied"display after query execution through WAD incorrect
Hi ,
In my queries i provide varible entries for 0FISCPER, 0FISCVARNT along with other variables.In the query i dispplay the values for the variables applied.When i run these queries through 2004s WAD if i were to select 0FISCPER = 01/08/2007 and 0FISCVARNT = AK after query execution the variable applied displays -
<b>0FISCPER = AK/01/08/2007
0FISCVARNT = #</b>.
It works fine on 3.5 templates.We are on SP9.We have a sandbox also and i tested it out in sandbox and have no problem there.
Is anyone facing the same issue?
Regards,
ShivaNot much experience in WAD but I think there should be a query in BEx Query Designer.
There you can choose that characteristics which takes time. Select "Advanced" tab from right hand side.
Under "Filter Value Selection During Query Execution" you will get 4 options.
BTW if you have a query on DSO then creating index ( secondary) on the affected characteristics would also resolve your problem
Regards
Anindya -
Show only overall result in query
Hi Experts,
I have a problem with a web template that I cannot seem to resolve. I have a query with calculated key figures and the overall result is calculated as an average so that I can determine percentages etc. It is only the overall result that my customer wants to see. However if I remove the sales doc characteristic then the overall result is also lost. The query needs sales doc to get the correct result, but then the user has to scroll to the bottom each time to see what he wants to see.
So my question is, how can I make the query/web template display only the overall result line without taking out sales doc and losing each line?
Many thanks in advance.
Sean.Hi Sean,
From what I could understand ,you can try the following.
Since you want the average of a calculated key figure with respect to Sales doc ,u can set the property of the calculated key figure as aggregation = average.
and referance characteristic as 'sales Doc'
Hope this helps.
Varada -
URGENT : display only overall result
hi........my query to track the performance of dealer.
in the selection i've added customer creation date (user entry), customer group as Dealer, branch (user entry), division (user entry) & fiscal year varient.
the structure is:
in the row : bill-to-party
in the column : last year sale | this year sale | last to last year sale |
if i run this qurery in the same workbook for different creation date then i just want to see the overall result for each date range.
how can i do this? pls help........Hi Priya,
Just remove Bill to party from Drill down, i mean no characterstics in drill down (along rows in your case) from all the sheets of workbook.
Only keep your 3 Key Figures along the cloumns.
It will just show you Overall Result. As you want overall result i dont think you need report displayed by Bill-to
Thanks
Chitrarth Kastwar -
Display of only overall Result
Hi
Currently we have a ARreport is displayed following manner
Customer 0- 30 Day 30 - 60 Days E.t.c
A 1000 6000
B 230 10000
Total 1230 16000
User Want to see the report in following manner
0 - 30 Days 30 - 60 Days
total 1230 16000
when he click on 1230, he wants to view the customer who makes to 1230
For information - 0-30 days is a calculated Key figure
if we remove the customer from the row. the total is becoming zero.
your help is appricatedHi,
Try this:
Create a structure in rows also..from context menu>new selectino>drag and drop Material. Rename new selection as Material.
Now drag and drop Material into rows next to structure.
Right clcik on Rows--->display as Hierarchy.
Now execute the Query.you will see Material (Which is Structural element description)...and if you expand it,you will get individual material values...
But as for as i know you would get overall result only for Basic KeyFigures.
Just tryout and let me know.
please don't forget to assign points to useful answers.that's the way of saying thnaks here in SDN. -
Using mail on Ipad only a blanc window will be displayed. After 10 sec the window is automatically closed and the app icon will be displayed.
Redirecting from safari to other mail adress works witout problems. Known Problem?Try to force quit your mail app. Double tap the home button. You'll see the app icons and previews on the screen. Scroll sideways if needed to bring the mail app up on the screen. Flick the preview up and off the screen to close the app. Tap on the home screen preview to exit the mode.
Try to open your mail again and see if it works. -
Unable to select the filter value after query execution
hi,
I am unable to drill down my keyfigures.
1.i have a lC and GC values out of which GC is hidden so after the query execution i would like to filter my value between GC and LC but i do get only LC value in the filter and i do not get GC value to select .
Could any one tell me how this can be done.this is very urgent.
Thx
Subharesolved on my own,so i am closing this.
Thx
Subha -
Date should be displayed on query execution
hello all
when v execute a query date should display when query is executed.like if i execute query on 01/06/2006 this date should be displayed and when execute query on 01/02/2006 this date should be displayed?,like that so on?
kindly anyone let me know how it should be done?
how this should be done?
many thankshi Balaji,
in bex analyzer, you can display the date with menu business explorer -> display text elements -> general, you will see some info, 'author'... 'last refreshed'.
in web (WAD) you can use web item 'text element' and choose element type 'general text' and
element id 'SYUZEIT'.
element id can be used
general text elements:
- technical name of the query (REPTNAME)
- description of the query (REPTXTLG)
- InfoProvider (INFOCUBE)
- key date for the query (SRDATE)
- validity of the data (date and time) (ROLLUPTIME)
- the person who wrote the query (AUTHOR)
- the last time the query was changed (date and time) (MODTIME)
- the last person to make changes to the query (MODUSER)
- current user (SYUSER)
- the last time the query was refreshed (date and time) (SYUZEIT)
hope this helps.
Message was edited by: A.H.P -
Invoice Print Report Add. Layout needs to be displayed after Last Page
Hi,
I am working on Invoice Print Report multiple layout Customization with RDF as Query model and created RTF using BI Publisher DEsktop and have requirement of Repeating Header on all pages, Print Page Total on all pages and Grand Total, Total Payable , Payment Options on last page. This was acheived by <?start@last-page-first:body?><?end body?>. But in one of the layout there is requirement to start new page and display some usage report for the invoice. I tried several options like using splt page break then display the custom usage report. But since I have given start last page body anything after this page is not getting picked up.
Can you please help in resolving this issue.
Regards,
Amit KulwalHi SAMI Mohammed ,
I have same issue like your, but i have to diplay a window like footer with some information. i have done like above details .
But when there are one page its displaying at page 1 only If there are 2 pages then its not at all diplaying in any pages.So kindly guide me regarding this.
Thanks in Advance,
Regards,
Neelima -
Why only receiver cc need to create manually after transportation?
Hi Friends,
I heard that when objects are moved from one environment to other environment the receiver Communication channel need to be created manually again. My question is why only receiver cc, why not sender cc?
Regards,
Suresh.Suresh,
When transporting objects in the Integration Directory, some fields are indeed cleared. However, this is both in sender and receiver communication channels.
The fields that are cleared are field that contain environment-specific data, such as hostnames, URLs etc.
Kind regards,
Koen -
Hi,
I am having an issue of having to refresh my IE to be able to view a migrated SharePoint 2010 site in 2010 mode in SP2013. Is this Token Service Problem, Request Management problem.....
Any ideas out there - driving me nuts!
Thanks.
John.
P.S> Still think this could be related to over-provisioned host as all SP Machines are virtual. Won't know for sure until Tuesday.
Thanks.
JOhn.What are you using Request Management for?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Cfquery results ordered by column added after query run
I have a function that returns a recordset, adds a column
using QueryAddColumn then loops through the recordset and reorders
the items using QuerySetCell.
Once the function has run, the output shows the items in
their natural order and lists the new order as a table column.
How would I then do the equivalent of ORDER BY myNewColumn
since the query has already run.
My code is attached.
Thanks,
PaulNever mind, sussed it!
Added the following for query of query: -
After Query execution report throwing "500 Internal server error".
I have created a new query and transported to QA till last week it was working, due to some testing perpose I have created copy query and added new functionalities and was successful and still working fine in QA.
After that I have made the same changes in DEV and moved the original query one to QA and after execution report is throwing an error "500 Internal server error".
Contacted BASIS and they said the conncections are fine.
Can anybody please suggest to resolve this issue!
Regards,
VJHai All,
First I am running the report from Query designer...
And Main report is created in DEV, moved last week into QA , then saved as MAIN_copy in QA and added extra fields was running fine.
Then went to DEV made the same changes to MAIN report like for the Query MAIN_copy and tranported to QA, now MAIN query is throwing "500 internal server error when i am running from query designer in QA.
When i try to run from RSRT it is going to debug screen @ the breakpoint and caught exception, if i stop and see the error it shows the below
System error in program SAPLRZI0 and form RESOLVE_SELECTION_OBJECT-01- (see long text) -
hi
HI all,
While Executing i am finding this ERROR
" warning your user master record is not sufficiently maintained for auth ob "
Please help me out
Regards,
Prasad -
Pie Chart on Overall result only
Hi
I have records like below
Profile TotalOrders ErrorsOrders NoErrorOrders
AllTel 20 15 5
Cellco 64 34 30
Overall
Result 84 49 35
I want the Pie Chart on Overall Result only . So i created the WebTemplates for it and i included the Chat and Table webitem .
So how can i get the chart on only overall result .
Regards
SureshYou want to display both on the same chart item ?
In this case, you've to define the query with display of the overall result, and change the properties of the chart item, to say that you display the results. Don't know if it's flagged on or off by default. No need of 2 DP. I thought you wanted to display a chart with details on one side, and an overall result on the other side.
Maybe you are looking for
-
Graphics card upgrade for HP G71-340US
Hello, I have a HP G71-340US running Windows 7 Home Premium 64-bit with a Intel GMA4500MHD. I know that this graphic card has a very low performance rate, so is there any alternate graphics available for me to purchase to put it in this system. With
-
"Excel found unreadable content in xlsm excel 2010 do you want to recover"
I have upgraded the Excel 2003 .xls (which has macro) file to Excel 2010 by save as .xlsm. But when i try to open with this in MS Excel 2010. Its showing "Excel found unreadable content in 'test.xlsm'. Do you want to recover the contents of this work
-
Hi All, In advance table when i click on add row button it should create multiple rows but on OAPage only one row should appear.Is it possible pls help me. Thanks.
-
Best Practices for Multiple Forms-Reports Instances (WebLogic) on Win2008R2
Hello all, I've succeeded in creating two instances of Forms/Report (FR) in WebLogic and am looking at about 5 or 6 FR instances on a one Windows Server 2008R2 box. I understand each instances will have its own folder (FR_Inst1) structure under the M
-
Usefullness of Certification Authority Web Enrollment?
If a deployment has Certificate Enrollment Web Service and Certificate Enrollment Policy Web Service installed is there still a need for Certification Authority Web Enrollment? This Windows Server 2012 CA design has an offline root CA, two Enterpris