Oo abap Display ALV with all selected lines
I will have to display an ALV report but all the records have to be selected while displaying.
I have to do this using OO ABAP only.
Thanks
Kiran
Solved on my own
Similar Messages
-
Display alv grids in selection screen based on the user event
Hi All,
I am workign on displaying ALV in same selection screen.I am able to display the ALV in selection screen.
But i have 2 buttons in my selection screen 'Create' and 'change'.
When i click on create i need with some type of data and when i click on 'change' my alv grid another type of data.Ex: if i click on crate mara data should be dispalyed when i click on change makt table data should be dispalyed and also i have user defined buttons are in my grids.
So i have used 2 containers to dispaly to different data.I am able to display the perfectly but the problem is first time when i click on create the grid is displaying when i click on change button the create alv grid is displaying down and change data is dispalying up.
I need only one alv grid at a time.Can anybody please let me know how can i do this.
Thanks,
TaraginiHello,
Also I would suggest if it is relevant data maintain in one interntal table and show/hide based on condition
through fieldcatalog (NO_OUT) parameter.
Thanks -
why does my scanned docs. come out with all colored lines on it after going thru the top feed try?
hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
PO print-preview for a PO with all deleted line items
Hello MM Gurus,
I am not able to print preview of a PO for which i deleted all the line items. It gives me a message saying that no print relevant changes.
Client need to print such POs. Client expects a text like "item cancelled " for deleted PO items.
My understanding is that its standard SAP pre delivered customising however it is not working.
Pls suggest.
Regards,
PankajAsk your ABAPer to modify the smart form, deleted materials wouldn't come for obvious reasons in standard system ... you need to get in customized/ developed.
-
WD ALV with mandatory selection mode (1..n or 1..1)
Hi there,
I tried to integrate an ALV table in my WD component. The problem here is, that I chose the selection 1..1 in my data supplying context node. Now I can't start my application anymore without the following error:
Number of Elements of Selection of VIEW_TABLE.1.DATA Violates Cardinality
What do I need to set as ALV property to solv the problem?
Kind regards,
Alberti just want you to check the importance of this
IF_WD_CONTEXT_NODE~SET_CHANGED_BY_CLIENT - set as true so that what ever changes you make to standard ones through coding are implemented...first donot set this parameter and test the things...if still things doesnot work out then use this parameter...Please go through the documentation before you really use this parameter.
in ALV - you have you use if_salv_wd-table_settings~set_selection_state - > as MULTI..but if this placed you selection should be 0-n or 1-n...otherwise it may go for a dump...i guess there should be some workaround...for this..
may be we have to debug to get the things done....
Lukas -
If IF_WD_CONTEXT_NODE_INFO~IS_MULTIPLE_SELECTION would be set to ABAP_TRUE... - > This will not set the value that retuns the value...
Edited by: Lekha on Dec 29, 2011 1:38 PM -
Run Abap in bachground with ignor Selection.
Hi,
is it possible to run an Report wich has an input-parameter in batch
with ignoring the selection-screen?
Short example:
parameters: p_matnr like mara-matnr.
data: matnr liek mara-matnr.
If sy-batch = 'X' the selection-screen shell be ignored!!
if sy-batch = 'X'.
get parameter id field matnr.
else.
matnr = p_matnr.
endif.
write: / matnr.
Thanks for help.
Regards, Dieterthanks for answers.
When the Programm is starting online,
the selection are coming.
when automatic starting from printing
production order the selection screen
doen't appear.
the different handling i check via
sy-tcode.
regards, Dieter -
Best way to to display tables with a select drop down
I have created many SQL query report portlets, but I need a way for the users to select a specific acct nbr in a drop down list and then update a table on the same page. What is the best way to do this? I had created a Frame Driver, but I can not find a way to publish it to a page. Any ideas would be great, thanks.
Hi,
You can use a form based on table to do this. Build the form and publish it on the same page. The form can have a combination of various form items like textbox, textarea and drop down list etc. The form allows to query on the table and update the table.
Thanks,
Sharmila -
Why can't spotlight search be deleted or cleared? Why so secretive? The problem is that this is a huge business security risk.
Fix it Apple!!!SteweyRoux wrote:
Why can't spotlight search be deleted or cleared? Why so secretive? The problem is that this is a huge business security risk.
Fix it Apple!!!
1) If you have sensitive business information on your phone, put a passcode on it.
2) Apple doesn't participate here. If you want to give them feedback, here's the link:
http://www.apple.com/feedback
Best of luck. -
Flush displayed ALV and display normal posting messages on same screen
Hi,
I have a requirement wherein i have displayed ALV with execute button on same screen with FI data displayed in ALV.
Now when user select one particular row and excute it , the requirement is to flush that ALV displayed and display normal
message such as POSTING DONE
How can i achieve it ? I am using REUSE_ALV_LISTWhat do you mean by "Now when user select one particular row and excute it "???
Meaning you do some event like double clicking on that particular row or after selecting it, you will trigger some button?
For 1st condition, make sure you've created an ALV event.
If 2nd one, either you create/modify the ALV toolbar.
Then you can do a simple call screen to exit from that ALV. Or a simple pop up message. -
Hi,
Can any one send sample code for the follwing requirement.
I wnat to display alv with column and also row headings.
Ex:
date1 date2 date3
orderno 01/01/2006 01/02/2006 01/03/2006
quantity 100 200 300
Thanks in advance.
Kiran.Hi Kiran,
First get the Final or Output Internal Table as
Date Orderno Qty
then Convert it into
Date
Orderno
Qty
You'll get what you have asked for.
Cheers,
Prashanth -
Does the 24 inch display come with everything?
I am going to be getting a new macbook pro soon, and I was wondering if the new 24 inch display comes with all of the cables needed to hook it up to the laptop, or do i have to by them separately?
Yes it does. It has one cable out of the back of the display which splits into 3 at the other end (USB, DisplayPort and Power). It's sweet.
-
Hi Experts,
When clicking the button 'append row', I want to add a line filled with some values in selection screen.
I work with OO.
need help please.
MohamedHello Mohamed
The logic is the same as before. Search for $MODFIED to detect the changes in the sample report.
However, I do not think that these requirements make any sense because if you re-implement the Copy function you obviously have to re-implement the Paste function (and perhaps Undo function as well), too.
So basically you reinvent the wheel again.
*& Report ZUS_SDN_ALV_GRID_EDITABLE
*& Thread: ADD A line in alv with values
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="974654"></a>
REPORT zus_sdn_alv_grid_editable_1x.
TYPE-POOLS: abap.
DATA:
gd_okcode TYPE ui_func,
gd_repid TYPE syst-repid,
gif_adapter TYPE REF TO if_salv_adapter,
go_docking TYPE REF TO cl_gui_docking_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
gt_fcat TYPE lvc_t_fcat,
gs_layout TYPE lvc_s_layo.
DATA:
gt_outtab TYPE STANDARD TABLE OF knb1.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_function TYPE ui_func READ-ONLY,
ms_row TYPE lvc_s_row READ-ONLY,
ms_outtab LIKE LINE OF gt_outtab. "$MODIFIED
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender,
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
sender,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm
sender,
handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING
er_data_changed
e_onf4
e_onf4_before
e_onf4_after
e_ucomm
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
ENDMETHOD. "handle_double_click
METHOD handle_toolbar.
" define local data
DATA: ls_button TYPE stb_button.
" Redefine toolbar button functions in order to be able to
" handle them in event USER_COMMAND (standard toolbar functions
" do NOT raise event USER_COMMAND !!!)
LOOP AT e_object->mt_toolbar INTO ls_button.
CASE ls_button-function.
WHEN cl_gui_alv_grid=>mc_fc_loc_append_row.
ls_button-function = 'APPEND_ROW'.
WHEN cl_gui_alv_grid=>mc_fc_loc_insert_row.
ls_button-function = 'INSERT_ROW'.
WHEN cl_gui_alv_grid=>mc_fc_loc_copy. "$MODIFIED
ls_button-function = 'COPY'.
WHEN OTHERS.
CONTINUE.
ENDCASE.
MODIFY e_object->mt_toolbar FROM ls_button INDEX syst-tabix.
ENDLOOP.
ENDMETHOD. "handle_toolbar
METHOD handle_user_command.
" Get current row for function 'Insert Row'
CALL METHOD sender->get_current_cell
IMPORTING
* e_row =
* e_value =
* e_col =
es_row_id = ms_row
* es_col_id =
* es_row_no =
" Store redefined function code
md_function = e_ucomm.
CASE e_ucomm.
WHEN 'APPEND_ROW' OR
'INSERT_ROW'.
" Just trigger PAI
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'NEW_ROW'
* IMPORTING
* rc =
WHEN 'COPY'. "$MODIFIED
READ TABLE gt_outtab INTO ms_outtab INDEX ms_row-index.
WHEN OTHERS.
ENDCASE.
ENDMETHOD. "handle_user_command
METHOD handle_data_changed.
* define local data
DATA: ls_outtab LIKE LINE OF gt_outtab,
ls_good TYPE lvc_s_modi.
BREAK-POINT.
LOOP AT er_data_changed->mt_good_cells INTO ls_good
WHERE ( fieldname = 'ERDAT' ).
** CALL METHOD er_data_changed->get_cell_value
** EXPORTING
** i_row_id = ls_good-row_id
** i_fieldname = ls_good-fieldname
** IMPORTING
** e_value = ls_outtab-erdat.
ls_outtab-erdat = ls_good-value.
IF ( ls_outtab-erdat < '20070101' ).
CALL METHOD er_data_changed->add_protocol_entry
EXPORTING
i_msgid = '00'
i_msgty = 'E'
i_msgno = '398'
i_msgv1 = 'Date must be >= 01.01.2007'
* i_msgv2 =
* i_msgv3 =
* i_msgv4 =
i_fieldname = ls_good-fieldname
i_row_id = ls_good-row_id
i_tabix = ls_good-tabix.
ENDIF.
ENDLOOP.
er_data_changed->display_protocol( ).
" Not really required (only for validations)
ENDMETHOD. "handle_data_changed
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_outtab UP TO 10 ROWS.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
EXPORTING
repid = gd_repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'EXIT' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
WHEN 'NEW_ROW'.
PERFORM add_new_row.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ADD_NEW_ROW
* text
* --> p1 text
* <-- p2 text
FORM add_new_row .
* define local data
DATA: ls_outtab LIKE LINE OF gt_outtab,
ls_stable TYPE lvc_s_stbl,
ld_idx TYPE i.
ls_outtab-bukrs = '1000'.
ls_outtab-ernam = syst-uname.
CASE lcl_eventhandler=>md_function.
WHEN 'APPEND_ROW'.
APPEND ls_outtab TO gt_outtab.
WHEN 'INSERT_ROW'.
ld_idx = lcl_eventhandler=>ms_row-index + 1.
INSERT ls_outtab INTO gt_outtab INDEX ld_idx.
WHEN OTHERS.
ENDCASE.
" Refresh ALV list display
ls_stable-row = abap_true.
ls_stable-col = abap_true.
CALL METHOD go_grid1->refresh_table_display
EXPORTING
is_stable = ls_stable
* i_soft_refresh =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ADD_NEW_ROW
*& Form INIT_CONTROLS
* text
* --> p1 text
* <-- p2 text
FORM init_controls .
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grids
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_docking " go_cell_top
EXCEPTIONS
OTHERS = 5.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
" ENTER trigger event DATA_CHANGED
CALL METHOD go_grid1->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter
EXCEPTIONS
error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
lcl_eventhandler=>handle_double_click FOR go_grid1,
lcl_eventhandler=>handle_toolbar FOR go_grid1,
lcl_eventhandler=>handle_user_command FOR go_grid1,
lcl_eventhandler=>handle_data_changed FOR go_grid1.
PERFORM build_fieldcatalog.
* Display data
gs_layout-grid_title = 'Customers'.
gs_layout-smalltitle = abap_true.
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
** i_structure_name = 'KNB1'
is_layout = gs_layout
ir_salv_adapter = gif_adapter
CHANGING
it_outtab = gt_outtab
it_fieldcatalog = gt_fcat
EXCEPTIONS
OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " INIT_CONTROLS
*& Form BUILD_FIELDCATALOG
* text
* --> p1 text
* <-- p2 text
FORM build_fieldcatalog .
* define local data
DATA: ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'KNB1'
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
ls_fcat-edit = abap_true.
MODIFY gt_fcat FROM ls_fcat
TRANSPORTING edit
WHERE ( key NE abap_true ).
ENDFORM. " BUILD_FIELDCATALOG
Regards
Uwe -
Download alv report output to excel format with out header line
Hi experts,
i want to download a alv report output into excel formatt with out the header line but it has to download including field description. as this output will fed into another transaction, the downloaded excel file should be with out header line.
fro eg:
Report : Zabc ABAP Development Page : 1
Run Date : 12/14/06 System: UD400
Run Time : 08:45:37
this header details should not be downloaded into the excel file.
could somebody help me please.
thanks
deepuhi jayanti,
thanks for your response.
i have delclared all the field types as character but still it is not downloading and it 's sy-subrc is 4... the code is as below.
*field names
lt_fieldnames-value = 'Material Number'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Plant'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Material Group'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Material Description'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'UOM'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Price Unit'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Material Type'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'X-Plant Status'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Valuation Class'.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_avmng.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_avntp.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Latest PO Qty'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Latest PO Cost'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'PO Creation Date'.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_fcaqt.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Prev. Yr. Std. Cost'.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_stcst.
APPEND lt_fieldnames.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = 'XLSHEET'
CREATE_PIVOT = 0
DATA_SHEET_NAME = ' '
PIVOT_SHEET_NAME = ' '
PASSWORD = ' '
PASSWORD_OPTION = 0
TABLES
PIVOT_FIELD_TAB =
data_tab = t_output1
fieldnames = lt_fieldnames
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_pivot_fields = 6
download_problem = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE e001 WITH 'Data could not be downloaded'.
ENDIF.
ENDFORM. " z_dwn_xl
thanks
deepu -
Displaying columns of alv with Main Heading and Sub Heading
Hi friends.
I have certain fields in display of ALV.
Out of all fields(columns), I would have to display some columns with one Main Heading,Below it's being split in multiple rows.
I have data relevent to that multiple fields.
Let say ,
In first row it will show |Allowance |
In second |HRA |PA | OTHERS|
Thanks And Regards,
Amit RautHi,
This is not possible
Refer these links
Re: ALV query
Re: Multiple lines in alv column headings
If this solves ur problem reward points and close the thread -
Dear gurus,
Need help in displaying ALV list report. the below report is an example of AR aging report. The report output is as below:
DEC
NOV
OCT
SEP
0-30
31-60
61-90
90+
xx
xx
xx
xx
SUBTOTAL
The first 2 lines are the list header. While the 'x' is the amount.
How can i display the above output with 2 header lines? I was thinking of using the REUSE_ALV_FIELDCATALOG_MERGE function. But it will have 2 lines of body row too. In fact, i only one one row in the body. But if i define the header lines manually, i would not able to do the subtotal at the end of the alv list. I need to have the subtotal too.
Thanks in advance!Hi,
For this requirement you need to populate the fld catalog using row_pos and col_pos fields specifing proper position.
See this code snippet ..... this is only possible for ALV list.
TYPE-POOLS: slis.
DATA: ld_fieldcat TYPE slis_fieldcat_alv.
DATA: t_alv_fieldcat TYPE STANDARD TABLE OF slis_fieldcat_alv.
DATA : it_fld TYPE slis_t_fieldcat_alv,
wa_fld TYPE slis_fieldcat_alv.
data: BEGIN OF itab OCCURS 0,
carrid like sflight-carrid,
connid like sflight-connid,
planetype like sflight-planetype,
seatsmax like sflight-seatsmax,
END OF itab.
START-OF-SELECTION.
SELECT carrid connid planetype seatsmax
FROM sflight
INTO TABLE itab.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos = '1'.
ld_fieldcat-col_pos = '1'.
ld_fieldcat-tabname = 'ITAB'.
ld_fieldcat-fieldname = 'CARRID'.
ld_fieldcat-ref_tabname = 'SFLIGHT'.
ld_fieldcat-outputlen = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos = '1'.
ld_fieldcat-col_pos = '2'.
ld_fieldcat-tabname = 'ITAB'.
ld_fieldcat-fieldname = 'CONNID'.
ld_fieldcat-ref_tabname = 'SFLIGHT'.
ld_fieldcat-outputlen = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos = '2'.
ld_fieldcat-col_pos = '1'.
ld_fieldcat-tabname = 'ITAB'.
ld_fieldcat-fieldname = 'PLANETYPE'.
ld_fieldcat-ref_tabname = 'SFLIGHT'.
ld_fieldcat-outputlen = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos = '2'.
ld_fieldcat-col_pos = '2'.
ld_fieldcat-tabname = 'ITAB'.
ld_fieldcat-fieldname = 'SEATSMAX'.
ld_fieldcat-ref_tabname = 'SFLIGHT'.
ld_fieldcat-outputlen = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = t_alv_fieldcat[]
TABLES
t_outtab = ITAB. "internal table
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Amitava
Maybe you are looking for
-
What is the easiest way to mix and match drum samples from Logic software instruments
I have been using Logic software instruments (EXS 24 drums kits) for a while. I know how to edit indiviual zones in a drum kit but I would like to know how to copy and paste multiple zones all at once from one kit to another so that I can create a hy
-
After installing 10.7.2 from scratch, permission errors remain
Hey, this is a summery of what have happened: 1. upgraded to Lion from SL (via AppStore) 2. have played with 'get info' > 'apply to all enclosed items' :/ 3. things have gone messy, slow, permission errors. example: (Warning: SUID file “System/Libra
-
Hard drive suddenly not showing up
Hi. I have a 1.5ghz 17" PB with 1GB of RAM. I got it in June '04. Today, I attempted to wake it from sleep after having used it all morning. I typed in my password, and then the box went grey and didn't respond for long time. I force-restarted, and w
-
How do i transfer myAOL mail and address book to Yahoo
I am now with AOL and i want to transfer all my AOL addresses to Yahoo . I am having a lot of trouble with getting my mail from my account with Aol and going back and forth from Mozilla to my address book and forwarding is taking forever . I would li
-
Bridge crashing immediately upon launch
Greetings, I've scoured the Web looking for an answer for this and while I've come across many possible reasons and solutions, none seem to fit the bill. I am using a Trail of CS-5 Extended (12.0.4) on a Mac Mini, OS-X Snow Leopard 10.6.7, 4GB RAM. W