OOB Error - WLC OOB VG

I have configured OOB 4.5.1 VG with WLC 2100.
NAC:
CAS is located on VLAN 40 with 192.168.123.2/24
CAM is located on VLAN 60 with 192.168.199.2/24
SNMP Receiver -- community: cam_v2
WLC profile: -- V2C Read: cam_v2,
                      V2C Read/Write: cam_v2 
Successful added 192.168.123.3 with WLC Profile
NAC Server is connected to Gi2/0/2 and Gi2/0/3
NAC Manager is connected to Gi2/0/1
Switch: 
3750 is the core switch like follow:
interface GigabitEthernet1/0/6
description connect to WLC Port 1
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet1/0/7
description connect to WLC Port 2
switchport trunk encapsulation dot1q
switchport trunk native vlan 40
switchport trunk allowed vlan 40,70,170
switchport mode trunk
interface GigabitEthernet2/0/1
description CAM
switchport access vlan 60
interface GigabitEthernet2/0/2
description trsut_VLAN
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 3-10,40,60,70
switchport mode trunk
interface GigabitEthernet2/0/3
description untrust_VLAN
switchport trunk encapsulation dot1q
switchport trunk native vlan 998
switchport trunk allowed vlan 13-20,170
switchport mode trunk
Switch 3750 is the core switch.
We set Gi1/0/6 as trunk interface to WLC Port 1, Gi1/0/7 as trunk but only 40,70 and 170 with native 40 connected to WLC Port 2.
Wireless:
WLC Mgr interface is VLAN40 with 192.168.123.3/24
AP interface is VLAN7 with 192.168.120.2/24
SNMP General - cam_v2
Trap read/write: cam_v2
SSID with vlan_nac interface with Quarantee VLAN 170, and Interface VLAN 70
i did 2 tests :
  1. associated with WLC "PORT 1" <---Result : Can get the login page but fail to login (OOB Error: OOB Client <MAC></IP> is not found.
  2. associated with WLC "PORT 2" <-- Result:  Can't get the login page
WLAN set the vlan_nac interface and check the  "NAC" enabled option.
How to succes configured WLC with NAC???? Any Suggestion? or any successful case could be shared? Many Many Thanks
I attached result for reference.

Could give more information? i double check all snmp setting on WLC and NAC is correct and successfully add WLC device into NAC.
However, i wanna to ask L2 adjacent between WLC and NAC Server..
what it mean ??
interface GigabitEthernet1/0/6
description connect to WLC Port 1
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet2/0/2
description trust_VLAN
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 3-10,40,60,70
switchport mode trunk
interface GigabitEthernet2/0/3
description untrust_VLAN
switchport trunk encapsulation dot1q
switchport trunk native vlan 998
switchport trunk allowed vlan 13-20,170
switchport mode trunk
Should i add any native vlan 998 or 999 into Gi1/0/6? in order to snmp trap successfully deliver to CAM?
How can I check SNMP trap fail to send to CAM? .... i have 2 clients ..both have same issues.. !!!

Similar Messages

  • Decrypt Errors - WLC 4404

    Hello,
    We recently had a few clients being locked down with countermeasures by our WLC 4404 due to TKIP-MIC errors. After doing some reading on the benefits of AES over TKIP I switched our WLAN security settings to AES, and pushed a new wireless policy to our client machines. Every thing appeared to work well, except now the trap log on the 4404 is showing a LOT of WPA decrypt errors. I've checked a few of the clients that appear to have problems, but they've got the right policy and WPA settings to match what is on the WLC.
    It's not one particular NIC, it's various clients.
    Any thoughts on how I might clear these up?
    Rob

    One reason for that is configuration of two WEP keys on a single WLAN is not supported. Currently WLAN can only take one WEP key.

  • Error when running workflow inititiation program

    Hi,
    I get the following error when I try to run my java application which initiates
    a BPM workflow.
    <Nov 28, 2001 3:21:32 PM PST> <Error> <B2B> <<WLC-WLPI-Plugin> ERROR: WLC-WLPI
    p
    lugin must be initialized before creating workflow instances>
    Exception occured: com.bea.b2b.wlpi.WLPIException: ERROR: WLC-WLPI plugin must
    be initialized before creating workflow instances
    I could not find any documentation on how to perform this step. Can anyone please
    help. I have also attached this program.
    --Krish.
    [PIP3A2_Customer_RN2.java]

    Yes the B2B server is started and running. I see these two final messages which
    I believe is the indication that the server is up and running.
    Initialized WebLogic Integration Plugin Framework version 2.1
    Started WebLogic Integration - BPM Server version 2.1
    --Krish.
    "Adrian Price" <[email protected]> wrote:
    Are you sure the server has finished starting up? You should see a console
    message about WebLogic Integration 2.1 started when it is ready to service
    client requests.
    "Krish Khambadkone" <[email protected]> wrote in message
    news:3c057360$[email protected]..
    Hi,
    I get the following error when I try to run my java application whichinitiates
    a BPM workflow.
    <Nov 28, 2001 3:21:32 PM PST> <Error> <B2B> <<WLC-WLPI-Plugin> ERROR:WLC-WLPI
    p
    lugin must be initialized before creating workflow instances>
    Exception occured: com.bea.b2b.wlpi.WLPIException: ERROR: WLC-WLPIplugin
    must
    be initialized before creating workflow instances
    I could not find any documentation on how to perform this step. Cananyone
    please
    help. I have also attached this program.
    --Krish.

  • Hub startup failed due to licensing failure

    Hi all.
    I have just installed weblogic 6.0 sp1 on solaris 2.8. the web server starts
    up and everything is hunky dory.
    furthermore i downloaded collaborate 1.0.1 and installed it. the
    installation went fine.
    here is my problem. when i execute the startWeblogic.sh script in the hub,
    Weblogic reports the following error:
    <24-Apr-01 13:49:03 GMT+01:00> <Error> <WLC> <<Hub> ERROR: Hub startup
    failed due to licensing failure.>
    I get this problem using jdk122 and jdk130.
    I cannot seem to find the problem.
    Any feedback would be appreciated.
    PS. My license.bea file looks as follows:
    <?xml version="1.0"?>
    <bea-licenses>
    <license-group format="1.0" product="WebLogic Collaborate"
    release="1.0">
    <license
    component="Core Server"
    expiration="2001-05-24"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    signature="2tDDH3g1qXubdlfsahWRNrR6+tc=0MC0CFCoH/XUHiZuu+yhzpuzv6UFl
    kJ44AhUA2/U26g1keq5nNoO00NC2u9ezWeA="
    />
    </license-group>
    <license-group format="1.0" product="wlpi" release="1.2">
    <license
    component="WebLogic Process Integrator"
    expiration="2001-05-24"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    users="5"
    signature="2tDDH3g1qXubdlfsahWRNrR6+tc=0MCwCFEh5H427STpTMX1y25DSmc65
    b/MVAhQMNJo1ujoB6DudzF59hL/Tx2vbGQ=="
    />
    </license-group>
    <license
    component="WebLogic"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="OFcm7oSc4jOT5vonluVZpsAHX2g=0MCwCFEmkcBweXEoxtJxzCIarx8i+
    XBguAhQvCxM9E/T4HGfbIUfb4+OiNUYsPw=="
    />
    <license
    component="SSL/Export"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="OgS8PvglCrGr5xglLHeut8tE5vc=0MC0CFQDcxuNftALK3tZYuJw6hI15
    GaqrBgIUcTi0vNzwoG1alTX1WXnvcX9EOiM="
    />
    <license
    component="2PC"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="CcdspC/3P0iELwWsETBWI/hEalw=0MC0CFQCtTlW7enw3kFZ7IU09jaa/
    BVle5wIUSSfMk23C19hznredmfr+soEYiX0="
    />
    <license
    component="In-memory Replication - Servlet"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="c+mtrQ1ZuRiKeiELua/hSxvHqew=0MC4CFQC4qvLRsblTBvC5+IEVrDI1
    Tek1YwIVAJ1NYWZE6xPHYyyVdlaXRJbhayCj"
    />
    <license
    component="In-memory Replication - EJB"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="ZenJ1bPXGf2N/Bq8XugDnDIP8sQ=0MC0CFQC+ayYQFxhpIMug7ZHtZIfS
    vg4tlwIUHIYgx30GoxIdmR19cGddWM/mp3E="
    />
    <license
    component="EJB 1.1"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="XwwhoY5ysJ8h1pjzx23ujxZI9nY=0MC4CFQC2ATLeRv6cStQE1B/gyMUT
    R6SRvQIVAMsQmtFC0/J4sF26n+B1zEyDOmv/"
    />
    <license
    component="EJB 2.0"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    units="5"
    signature="ksI9jkE6gL9u8GdVEpZNQtOvjm8=0MCwCFBUir1rQV/FLNdc+4lfdIV1x
    +xk5AhQpQwwWMfUd6TbL3UvB0u9DbZponQ=="
    />
    <license
    component="JMS"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="Z4Q4VngOAJSqSsr1UXC37DTOyVg=0MC0CFQCZtOwzb02hOSR3z9Hp6k86
    nl1uFQIUfhy+ODL+Y7B9DkGDS7yT4zQPPpE="
    />
    <license
    component="Cluster"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="Tkg9CGjEik3MbkFmi6rPsSiO0J0=0MC0CFEAV5hPKLVSgV8YoeCEVu5m7
    5ktkAhUA2lBI0PwiMigvK1E/pVS0vqmsy3w="
    />
    <license
    component="Clustered JMS"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="nEpfLZwWyM4Bo7UZZHE4hQgntMc=0MCwCFBKYtPvqZE18JdGBvU6cZomM
    xW1cAhR3moJKg7FHMxvsZphQz5jVCahrfA=="
    />
    <license
    component="jDriver/MSSQLServer4"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="Dgw2DzDWyBNob6pJunUY1Xoz7c8=0MC0CFQC4PKj8UFoC3J0XuC7pmzRL
    TtgP8QIUAhJF5DuvZ10zvf/6mxe0Ti/rG4c="
    />
    <license
    component="jDriver/Informix4"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="6O/i8fVnKIeVwzz+e0zUMQL5uRU=0MC0CFH+NK7nnRm+Qp+qRXZdeV2yF
    6YxdAhUA3vch2xTdmM5Ao+00+IOR5f3jGH0="
    />
    <license
    component="jDriver/Oracle"
    expiration="2001-05-23"
    ip="any"
    licensee="BEA Evaluation Customer"
    type="EVAL"
    units="5"
    signature="NtSVpPAloTJqBstOWKVnuh3q0H4=0MC0CFA+2ny24Zdyrb0lsL3duwfEB
    9zKMAhUAqDtTbLMN3QfJWUVhJr+NBQU/x/k="
    />
    </license-group>
    </bea-licenses>

    Gotta add listeners.ContextListener to your CLASSPATH
    in Eclipse.
    I don't think that package name is right. You've got
    another problem besides your context XML.
    %The context XML may not be the problem at all. Such tomcat errors are standard when it was unable to load required classes on startup.
    The listeners all being interfaces, it's impossible to say whether it is the standard listeners or custom listener classes (regd in your web.xml) that's not being found on startup.
    cheers,
    ram.

  • Invalid switch configuration-oob error

    Hi all,
    We are using NAC in OOB Virtual Gateway mode only for wireless users.But we are facing an error on user PC stating that,
        invalid switch configuration-OOB error:OOB client MAC ADD/IP ADD not
                       found. Please contact your network administrator.
                  Please contact your administrator if the problem persists.
    Thanks in advance.

    Please check your snmp settings on the wlc and the manager. This is usually seen when the agent passes the mac address and clients ip address to the CAS but the CAM never receives the mac notification trap.
    thanks,
    Tarik

  • Wireless OOB NACissue : OOB Error: connected device client_MAC not found.

    Dear all,
    I've deployed wireless OOB NAC. Some user can login normally, but some other user can not login. The error message is OOB Error: connected device <client_MAC> not found. This only happen at some PC user.
    Does anybody have any idea?
    Thanks

    Dear all,
    When some wireless user cannot login, i usually issue command clear mac address-table dynamic on the switches then the problem is solved temporarily. I wonder why this was happened. Is there any parameter that i need to tune in NAC or WLC or switches?

  • Error in submitting sample OOB sales order.

    Hi,
    We are working on 7.2.2.1.0 and O2a Cart. 2.0.1.0.0 while testing OOB code and sample salesorder10000Deliver EBM getting below error on order creation.
    Any Idea?
    <68e30e7e84bfb14e:-6114209b:13efa947e1c:-8000-00000000000000e6> <1370003911273> <BEA-000000> <rule.XQueryHelper: Error in call to extension function {public abstract void oracle.communications.ordermanagement.extensionpoint.XQueryExtensionContext.setParameter(java.lang.String,java.lang.Object)}: Cannot convert value of type element({urn:com:metasolv:oms:xmlapi:1}Null, xs:anyType) to class class java.lang.Object. . File[*module with no systemId* (actual location resolved to [*module with no systemId*])] Line[42] Column[-1]
    net.sf.saxon.trans.XPathException: Error in call to extension function {public abstract void oracle.communications.ordermanagement.extensionpoint.XQueryExtensionContext.setParameter(java.lang.String,java.lang.Object)}: Cannot convert value of type element({urn:com:metasolv:oms:xmlapi:1}Null, xs:anyType) to class class java.lang.Object
         at net.sf.saxon.functions.ExtensionFunctionCall.iterate(ExtensionFunctionCall.java:229)
         at net.sf.saxon.expr.Expression.evaluateItem(Expression.java:352)
         at net.sf.saxon.expr.Expression.process(Expression.java:461)
         at net.sf.saxon.instruct.ElementCreator.constructElement(ElementCreator.java:376)
         at net.sf.saxon.instruct.ElementCreator.evaluateItem(ElementCreator.java:322)
         at net.sf.saxon.instruct.Instruction.iterate(Instruction.java:308)
         at net.sf.saxon.functions.Existence.effectiveBooleanValue(Existence.java:105)
         at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:679)
         at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
         at net.sf.saxon.expr.LetExpression.process(LetExpression.java:378)
         at net.sf.saxon.instruct.ElementCreator.processLeavingTail(ElementCreator.java:296)
         at net.sf.saxon.instruct.Block.processLeavingTail(Block.java:556)
         at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
         at net.sf.saxon.instruct.ElementCreator.constructElement(ElementCreator.java:376)
         at net.sf.saxon.instruct.ElementCreator.evaluateItem(ElementCreator.java:322)
         at net.sf.saxon.instruct.Instruction.iterate(Instruction.java:308)
         at net.sf.saxon.instruct.Choose.iterate(Choose.java:754)
         at net.sf.saxon.expr.LetExpression.iterate(LetExpression.java:306)
         at net.sf.saxon.expr.ForExpression$MappingAction.map(ForExpression.java:772)
    at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    Caused By: oracle.communications.ordermanagement.orchestration.generation.OrchestrationPlanGeneratorException: Could not create Orchestration Plan
         at oracle.communications.ordermanagement.orchestration.generation.i$a.a(Unknown Source)
         at oracle.communications.ordermanagement.orchestration.generation.a.a(Unknown Source)
         at oracle.communications.ordermanagement.orchestration.execution.impl.b.a(Unknown Source)
         at com.mslv.oms.handler.completeorder.CompleteOrderHandlerEJB.a(Unknown Source)
         at com.mslv.oms.handler.completeorder.CompleteOrderHandlerEJB.process(Unknown Source)
         at com.mslv.oms.handler.a.processRequest(Unknown Source)
         at com.mslv.oms.handler.createorder.CreateOrderHandlerEJB.process(Unknown Source)
         at com.mslv.oms.handler.a.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
         at oracle.communications.ordermanagement.ws.c.a(Unknown Source)
         at oracle.communications.ordermanagement.ws.d.a(Unknown Source)
         at oracle.communications.ordermanagement.ws.OrderManagementWSPortImpl.createOrder(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.wsee.component.pojo.JavaClassComponent.invoke(JavaClassComponent.java:112)
         at weblogic.wsee.ws.dispatch.server.ComponentHandler.handleRequest(ComponentHandler.java:84)
         at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:141)
         at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:114)
         at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
         at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
         at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
         at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseWSServlet.java:285)
         at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:169)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
         at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    Caused By: oracle.communications.ordermanagement.rule.XMLRuleException: Error in call to extension function {public abstract void oracle.communications.ordermanagement.extensionpoint.XQueryExtensionContext.setParameter(java.lang.String,java.lang.Object)}: Cannot convert value of type element({urn:com:metasolv:oms:xmlapi:1}Null, xs:anyType) to class class java.lang.Object
         at oracle.communications.ordermanagement.rule.l.b(Unknown Source)
         at oracle.communications.ordermanagement.orchestration.generation.j.a(Unknown Source)
         at oracle.communications.ordermanagement.orchestration.generation.j.a(Unknown Source)
         at oracle.communications.ordermanagement.orchestration.generation.j.a(Unknown Source)
    Regards,
    UJ

    Hi Ashwin
    In realtime there will limit to user to access to some Plant Data.
    For SD guys access to sales order only it will not allow to create delivery for that product..for thts y u r not allowed to access  for delivery.
    In real time they will create user profiles for each document type.
    Regards
    Srinivas.

  • Project Server 2013 - OOB Reports Error

    Hi,
    I have configured PWA site and I created and published many projects. I'm trying to use the OOB reports but I have the following error when I'm trying to view the report from the PWA but if I opened the report in Excel then refreshed data connections
    it will work.
    Any idea why it is not working from PWA?
    Thanks,

    Please configure Secure Store Service in order to  open report in WEB.
    I think either you are using Report Viewer and report author Group that is why you are able to open report on excel or you are using account which you configured in in excel services. If you will try with any other user account to open excel report then
    only accounts which are available in group can view the report.
    If you need your users to open reports in Excel client, you must follow the Report Authors configuration.
    Secure Store is only used by Excel Services it means if you want to open excel report on web(IE) then you must
    configure Secure store services.
    Secure store service doesn't
    talk to the Excel 2010 client.
    Report Viewers group configuration only supports use of reports on the web via Excel Services
    kirtesh

  • OOBE Error When installing CS6 on Mac. Cannot open Media DB

    So i am trying to install CC on a mac 10.10 OS, and when i run the install package, it runs the startup scripts, then flashes to validating install and them come up with a error that the installtion has failed
    Looking at the logs is says
    ERROR  OOBE  Cannot open MediaDB
    It says that four times
    Advise???

    Hi Sam,
    media.db file is located under below location. Please try deleting the existing one and then give a try. also, please give full control access to below location..
    MAC HD>library>application support>Adobe>caps>media.db
    Thanks,
    Ashish

  • NAC WLC OOB integration

    I am trying to get NAC integration with WLC working for wireless users in OOB and can't get it to work. I followed directions step by step from the Configuration Example on the Cisco web site. Without enabling NAC on the WLC I am able to associate and work fine. With NAC enabled, association works but the client stays on Quarantive VLAN and never gets switched. I can see the client as Discovered client on the CAM only when I turn off 802.1x for layer 2 security on the WLAN but still it does not get switched to Access VLAN nor do I get a web login screen. The DHCP for wireless clients is provided by the WLC itself so that traffic does not pass through the CAS. Am I doing anything wrong?

    Faisal
    I haven't tried to browse to the CAS IP. I will try that when I am there next time. The laptop did have a NAC agent with a discovery host of the CAM IP as it was used as a wired client before. Looking at the routing table, I would think routing should not be an issue as the Guest subnet correctly points to the untrusted interface with no GW and that should take VLAN 201 pathw hich is the quarantine VLAN ID for WLC Guest WLAN. Just FYI the 172.16.8.0 subnet which is the guest subnet is not being routed internally for security reasons and is jus a L2 VLAN on the core switch
    10.8.21.11/32           -               0 0
    10.8.21.1/32            -               1 0
    10.8.21.0/24            -               2 0
    0.0.0.0/0               10.8.21.1       1 0
    10.8.17.0/24            -               2 8
    10.8.15.0/24            -               2 8
    172.16.8.0/24           -               2 8
    10.8.21.10/32           -               0 2
    10.8.17.169/32          10.8.21.1       1 0
    10.8.17.152/32          10.8.21.1       1 0
    10.8.17.182/32          10.8.21.1       1 0
    10.8.17.128/32          10.8.21.1       1 0
    10.8.17.119/32          10.8.21.1       1 0
    10.8.17.137/32          10.8.21.1       1 0
    10.8.17.188/32          10.8.21.1       1 0
    10.8.17.200/32          10.8.21.1       1 0
    10.8.17.165/32          10.8.21.1       1 0
    10.8.17.124/32          10.8.21.1       1 0
    10.8.17.113/32          10.8.21.1       1 0
    10.8.17.197/32          10.8.21.1       1 0
    10.8.17.206/32          10.8.21.1       1 0
    Thanks
    Shaffeel

  • Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D

    i keep getting this Event in my event viewer and dont know what to do. Could use any help

    Hi,
    Regarding the error messages mentioned here, have you checked the below thread?
    Microsoft Security Client OOBE stopped
    due to the following error: 0xC000000D
    Please take a try with the methods suggested by the others above.
    Best regards
    Michael Shao
    TechNet Community Support

  • Bsod Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D

    I have a t540 with all hardawre and software updates running Win 7/64 pro and get this message repeatedly.  Microsoft says to delete  MSSEOOBE.etl but that file doesn't appear to be in the 64 bit version of Microsoft Security Essentials
    If it happen when the PC is in SLEEP mode it  causes an abnormal shutdown/recovery when the PC restarts  Did uninstall and reinstall MSE
    One MS thread says to contact the OEM - so here I am.
    I was also getting Code 10 Disk Errors but there was a MS KB fix for that
    Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
    Source:        Microsoft-Windows-Kernel-EventTracing
    Date:          5/29/2014 8:39:03 AM
    Event ID:      3
    Task Category: Session
    Level:         Error
    Keywords:      Session
    User:          SYSTEM
    Computer:      bill-THINK
    Description:
    Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/ev​ent">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
        <EventID>3</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>2</Task>
        <Opcode>14</Opcode>
        <Keywords>0x8000000000000010</Keywords>
        <TimeCreated SystemTime="2014-05-29T13:39:03.627614300Z" />
        <EventRecordID>209</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="212" />
        <Channel>Microsoft-Windows-Kernel-EventTracing/Adm​in</Channel>
        <Computer>bill-THINK</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="SessionName">Microsoft Security Client OOBE</Data>
        <Data Name="FileName">C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl</Data>
        <Data Name="ErrorCode">3221225485</Data>
        <Data Name="LoggingMode">5</Data>
      </EventData>
    </Event>
    Any thoughts?  I guess I will try another AntiVirus but Microsoft Security Essential is running on 2 other Win 7 laptops
    Thanks

    Hi,
    Regarding the error messages mentioned here, have you checked the below thread?
    Microsoft Security Client OOBE stopped
    due to the following error: 0xC000000D
    Please take a try with the methods suggested by the others above.
    Best regards
    Michael Shao
    TechNet Community Support

  • Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D using win 7 64bit over and over BSOD

    Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D    using win 7 64bit over and over BSOD
    My event viewer has been coughing the error line above. It has lead to the feeling of a Carotid Artery leak of memory where my whole
    system slowly stops working till BSOD. Windows Explorer just stops working then Death.
    I HAVE HAD THIS HAPPEN MORE AND MORE, AND IT APPEARS TO BE A PROGRAM PROBLEM, ANYBODY ELSE HAVE THIS.
    IT HAS COST ME 2 DAYS WORK NOW.
    MIKE

    Hi,
    When does the issue begin to occur?
    Since Windows system uses separated user mode and kernel mode memory space, stop errors are usually caused by kernel portion components, such as a hardware device,
    third-party drivers, backup software or anti-virus services (buggy services).
    Please refer to the following steps to troubleshoot the issue.
    1. Boot the computer in
    Clean Boot for a test.
    2. Temporarily disable all unnecessary hardware devices in Device Manager, such as Modem, sound card or external device.
    For detail steps, we can refer to the link below:
    Device Clean Boot
    3. Upgrade the virus definition, run antivirus program and perform a full scanning.
    If the issue persists, please upload the minidump file (%systemroot%\minidump) to SkyDrive (
    www.skydrive.live.com ), then share the link to me. I will be glad to assist you to analysis the data.
    Thanks,
    Novak

  • Microsoft Security Client OOBE stopped due to the following error: 0xC000000D

    I keep getting this error in my event Viewer and I removed Microsoft Security Client a few weeks ago and replaced it with Bitdefender 2012
    Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
    I am also getting these aswell...
    Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.
    Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0811960D92F5.  The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the
    network address (DHCP) server.
    A problem prevented Customer Experience Improvement Program data from being sent to Microsoft, (Error 80004005).

    If you do not want to reinstall Microsoft Security Essentials to stop this problem, there is a step which you MUST, I repeat, MUST follow.  As indicated above by Zuhl3156, YOU MUST, again, MUST shutdown the security counter.  This is a problem
    when you uninstall MSE, it does not remove the security counter.  This is the reason that everyone says to delete the C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl file.  This file is used and created by this counter.
    If you have uninstalled the MES, then you MUST delete the C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl.  But, MOST IMPORTANTLY, you MUST go into into Computer Management and drill down into:
    System Tools -> Performance -> Data Collector Sets -> Startup Event Tracing Sessions
    Then, in the frame to the right on that window, select Microsoft Security Client OOBE, right click on it and select Properties.  Then DISABLE it (uncheck the Enabled box).  Then, when you select OK, if you have uninstalled MSE and NOT reinstalled
    it, the entry in the right frame will 'magically' disappear.
    This is a problem with the uninstall of MSE and needs to be resolved by Microsoft (hopefully they are reading this).  It has taken me DAYS to discover this, and many different attempts to resolve this.  But, apparently, this has now resolved my
    problem.  I have seen performance counters cause many problems in my experience with Windows, and am very confident that this resolves the issue.
    I cannot thank Zuhl3156 enough for his suggestion and my willingness to try it (I noticed 'performance counter' and jumped on it).  It seems to work wonderfully for the moment.
    I hope this helps someone else who has spent days trying to chase this nightmare down.
    Jim

  • Microsoft Security Client OOBE Error plus 2 CSRSS Processes?

    This has to be a bit abnormal, but apparently this concerns what happened 30 minutes ago, System just flat out Froze up and then after the restart an error that received the Microsoft Security Client OOBE Error Code 0xc000000D had happened in the Kernel
    Tracing event, following the restart 2 CSRSS Process are now present, normally it should be 1 as a priority, and in turn that tells me an Exploit that Microsoft Might have missed some how hit my system and this issue is now concerning.

    Hi,
    Do you still get OOBE Error Code now?
    Regarding  your problems getting Microsoft Security Essentials OOBE error code 0xc000000D.
    Please navigate to C:/program data/microsoft/microsoft security essentials/support/  , and then locate the file: "MSSEOOBE.etl" and simply delete it.
    The MSE will recreate it after your restarting your computer. That could solve the issue.
    Please refer to the following thread for more details.
    Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D
    http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/session-microsoft-security-essentials-oobe-stopped/387c21ed-75db-47e3-9baf-687f6c66f0eb
    My Windows 7 has two csrss processes too.
    We can locate the file in the folder C: Windows/System32. Please test.
    If they are located in other folder, we could suspect them as virus. I suggest you to conducting a Antivirus scan.
    Please refer to the following thread for more detail.
    2 csrss.exe running Windows 8.1.
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/2-csrssexe-running-windows-81/cdbaf6d0-4920-4595-9f4f-b0d6e45b9d2a
    If there are any problems, please let me know.
    Best regards

Maybe you are looking for