Invalid switch configuration-oob error

Hi all,
We are using NAC in OOB Virtual Gateway mode only for wireless users.But we are facing an error on user PC stating that,
    invalid switch configuration-OOB error:OOB client MAC ADD/IP ADD not
                   found. Please contact your network administrator.
              Please contact your administrator if the problem persists.
Thanks in advance.

Please check your snmp settings on the wlc and the manager. This is usually seen when the agent passes the mac address and clients ip address to the CAS but the CAM never receives the mac notification trap.
thanks,
Tarik

Similar Messages

  • "Server either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error driving me nuts!

    OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
    this error mentioned above:
    "Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
    I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
    I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
    a few questions:
    1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
    you know better than me that it is not the case here!)
    2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
    virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
    3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
    4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
    5.how would I fix it?
    P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.

    Hi,
    Thank you for posting in Windows Server Forum.
    The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
    can create one external switch which might fix the problem.
    Please check below article for information.
    VDI Deployment Error About Virtual Switch
    In addition please referthis article for information regarding virtual switch.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • OOB Error - WLC OOB VG

    I have configured OOB 4.5.1 VG with WLC 2100.
    NAC:
    CAS is located on VLAN 40 with 192.168.123.2/24
    CAM is located on VLAN 60 with 192.168.199.2/24
    SNMP Receiver -- community: cam_v2
    WLC profile: -- V2C Read: cam_v2,
                          V2C Read/Write: cam_v2 
    Successful added 192.168.123.3 with WLC Profile
    NAC Server is connected to Gi2/0/2 and Gi2/0/3
    NAC Manager is connected to Gi2/0/1
    Switch: 
    3750 is the core switch like follow:
    interface GigabitEthernet1/0/6
    description connect to WLC Port 1
    switchport trunk encapsulation dot1q
    switchport mode trunk
    interface GigabitEthernet1/0/7
    description connect to WLC Port 2
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 40
    switchport trunk allowed vlan 40,70,170
    switchport mode trunk
    interface GigabitEthernet2/0/1
    description CAM
    switchport access vlan 60
    interface GigabitEthernet2/0/2
    description trsut_VLAN
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 999
    switchport trunk allowed vlan 3-10,40,60,70
    switchport mode trunk
    interface GigabitEthernet2/0/3
    description untrust_VLAN
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 998
    switchport trunk allowed vlan 13-20,170
    switchport mode trunk
    Switch 3750 is the core switch.
    We set Gi1/0/6 as trunk interface to WLC Port 1, Gi1/0/7 as trunk but only 40,70 and 170 with native 40 connected to WLC Port 2.
    Wireless:
    WLC Mgr interface is VLAN40 with 192.168.123.3/24
    AP interface is VLAN7 with 192.168.120.2/24
    SNMP General - cam_v2
    Trap read/write: cam_v2
    SSID with vlan_nac interface with Quarantee VLAN 170, and Interface VLAN 70
    i did 2 tests :
      1. associated with WLC "PORT 1" <---Result : Can get the login page but fail to login (OOB Error: OOB Client <MAC></IP> is not found.
      2. associated with WLC "PORT 2" <-- Result:  Can't get the login page
    WLAN set the vlan_nac interface and check the  "NAC" enabled option.
    How to succes configured WLC with NAC???? Any Suggestion? or any successful case could be shared? Many Many Thanks
    I attached result for reference.

    Could give more information? i double check all snmp setting on WLC and NAC is correct and successfully add WLC device into NAC.
    However, i wanna to ask L2 adjacent between WLC and NAC Server..
    what it mean ??
    interface GigabitEthernet1/0/6
    description connect to WLC Port 1
    switchport trunk encapsulation dot1q
    switchport mode trunk
    interface GigabitEthernet2/0/2
    description trust_VLAN
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 999
    switchport trunk allowed vlan 3-10,40,60,70
    switchport mode trunk
    interface GigabitEthernet2/0/3
    description untrust_VLAN
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 998
    switchport trunk allowed vlan 13-20,170
    switchport mode trunk
    Should i add any native vlan 998 or 999 into Gi1/0/6? in order to snmp trap successfully deliver to CAM?
    How can I check SNMP trap fail to send to CAM? .... i have 2 clients ..both have same issues.. !!!

  • Deploying agent 12c - Invalid switch - "oracle"

    Hello,
    My OMS is OEM 12c BP1, host OMS is AIX5.3.
    Deploying OEM Agent 12c on several Windows 2003SP2 remote servers, most of them successfully.
    But on one of them, it returns an error that puzzle me.
    In D:\oracle\product\agent12c\ADATMP_2012-08-30_08-19-52-AM\logs\install.err, I can read :
    Invalid switch - "oracle".The log In D:\oracle\product\agent12c\ADATMP_2012-08-30_08-19-52-AM\logs\install.log is
    D:\oracle\product\agent12c\ADATMP_2012-08-30_08-19-52-AM
    Present working directory:D:\oracle\product\agent12c\ADATMP_2012-08-30_08-19-52-AM
    Archive location:D:\oracle\product\agent12c\ADATMP_2012-08-30_08-19-52-AM  directory
    -ignorePrereqs
    ORACLE_HOSTNAME
    ORACLE_HOSTNAME
    myagenthost.mydomain.com
    AGENT_BASE_DIR
    AGENT_BASE_DIR
    D:/oracle/product/agent12c
    Agent base directory:D:/oracle/product/agent12c
    D:/oracle/product/agent12c
    OMS_HOST
    OMS_HOST
    myomshost.mydomain.com
    OMS Host:myomshost.mydomain.com
    myomshost.mydomain.com
    EM_UPLOAD_PORT
    1159
    AGENT_INSTANCE_HOME
    D:/oracle/product/agent12c/agent_inst
    b_doDiscovery
    false
    b_startAgent
    false
    b_forceInstCheck
    true
    AGENT_PORT
    3872
    Agent base directory:D:/oracle/product/agent12c
    OMS Host:myomshost.mydomain.com
    Agent image loc : "D:\oracle\product\agent12c\ADATMP_2012-08-30_08-19-52-AM"
    D:/oracle/product/agent12c configonlyfalse
    Reading the properties file: "D:\oracle\product\agent12c\ADATMP_2012-08-30_08-19-52-AM"\agentimage.properties
            1 file(s) copied.
    This is the version 12.1.0.1.0
    This is the type core
    This is the aru id 912And the log on the OMS host for this Agent deployment is
    2012-08-30_08-31-21:INFO:=========STACKTRACEPrinting Exception :oracle.sysman.prov.remoteinterfaces.exception.ClusterException: Error while running cmd D:/oracle/product/agent12c
    /ADATMP_2012-08-30_08-19-52-AM/agentDeploy.bat, on nodes myagenthost.mydomain.com.
            at oracle.sysman.prov.remoteinterfaces.nativesystem.NativeSystem.runCmdOnNodes(NativeSystem.java:1260)
            at oracle.sysman.prov.remoteinterfaces.clusterops.ClusterBaseOps.runCmdOnNode(ClusterBaseOps.java:263)
            at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:510)
            at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:496)
            at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.doInstall(BaseDeployerOps.java:330)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
            at java.lang.reflect.Method.invoke(Method.java:611)
            at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.executeActions(BaseDeployerOps.java:1732)
            at oracle.sysman.core.agentpush.ui.deployer.NewAgentDeployer.deploy(NewAgentDeployer.java:58)
            at oracle.sysman.core.agentpush.ui.deployfwk.DeploymentWorker.run(DeploymentWorker.java:26)
            at oracle.sysman.util.threadPoolManager.WorkerThread.run(Worker.java:264)
    oracle.sysman.prov.remoteinterfaces.exception.CommandException: The command "'D:/oracle/product/agent12c/ADATMP_2012-08-30_08-19-52-AM/agentDeploy.bat' -ignorePrereqs  ORACLE_HOS
    TNAME=myagenthost.mydomain.com  AGENT_BASE_DIR=D:/oracle/product/agent12c  OMS_HOST=myomshost.mydomain.com  EM_UPLOAD_PORT=1159  AGENT_INSTANCE_HOME=D:/oracle/product/agen
    t12c/agent_inst  b_doDiscovery=false  b_startAgent=false  b_forceInstCheck=true  AGENT_PORT=3872  2>D:/oracle/product/agent12c/ADATMP_2012-08-30_08-19-52-AM/logs/install.err  1>D
    :/oracle/product/agent12c/ADATMP_2012-08-30_08-19-52-AM/logs/install.log" was not run.
            at oracle.sysman.prov.remoteinterfaces.plugins.RemoteCommandJSCH.runcmd(RemoteCommandJSCH.java:213)
            at oracle.sysman.prov.remoteinterfaces.nativesystem.RemoteExecutionEngine.runcmd(RemoteExecutionEngine.java:417)
            at oracle.sysman.prov.remoteinterfaces.nativesystem.NativeSystem.runcmd(NativeSystem.java:5463)
            at oracle.sysman.prov.remoteinterfaces.nativesystem.WindowsSystem.runCmd(WindowsSystem.java:1662)
            at oracle.sysman.prov.remoteinterfaces.nativesystem.NativeSystem.runCmd(NativeSystem.java:4455)
            at oracle.sysman.prov.remoteinterfaces.nativesystem.NativeSystem.runCmdOnNodes(NativeSystem.java:1234)
            at oracle.sysman.prov.remoteinterfaces.clusterops.ClusterBaseOps.runCmdOnNode(ClusterBaseOps.java:263)
            at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:510)
            at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:496)
            at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.doInstall(BaseDeployerOps.java:330)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
            at java.lang.reflect.Method.invoke(Method.java:611)
            at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.executeActions(BaseDeployerOps.java:1732)
            at oracle.sysman.core.agentpush.ui.deployer.NewAgentDeployer.deploy(NewAgentDeployer.java:58)
            at oracle.sysman.core.agentpush.ui.deployfwk.DeploymentWorker.run(DeploymentWorker.java:26)
            at oracle.sysman.util.threadPoolManager.WorkerThread.run(Worker.java:264)
    ============It's also complaining that the error message cannot be found.
    I think I followed the same way to deploy Agent on this server than I did on other where it was successfully done. So, probably some configuration is different somewhere on the server itself which has to be checked and changed. Any idea ?
    Nicolas.

    Thank you for stopping by.
    Akanksha wrote:
    Is this locked avvount usecases that you are trying ?For example, you can create a named credential titled User_A, and set it to run as User_X that has the root privileges. In this case, the wizard logs in to the hosts as User_A, but installs as User_X.I really do not understand what you mean here. I have maybe 20 remote Windows server (all Windows 2003 SP2) which I deployed the Agent on, and 3 are failing even though I did exactly the same over all the servers.
    2 are returning the error below :
    Parameter format not correct - "ppl".
    The syntax of the command is incorrect.1 is returning the error I described in my first post. I sent you the files for that last one by email since this is the one I started to talk about in that thread.
    And yes, I agree, probably something specific on those 3 servers which I have to figure out.
    Thanks,
    Nicolas.

  • Cisco Prime 2.1 CLI-Template for Switch configuration Backup

    Hello everybody,
    I am trying to write a CLI Template in cisco Prime to save the running-configuration of our core switch to the FTP server, 
    I have already configured the FTP username and Password in the core Switch 
    ip ftp username cisco
    ip ftp password cisco123
    in Cisco Prime I have created a template as follow:
    copy running-config ftp: 
    $FTP_IP_addrress >> the FTP Server
    $name                    >> the name of file and the date
    After deploying this template on the core switch,
    I received Error Msg in Prime as follow:
    Error : Command returned an error : copy running-config ftp: 172.16.30.30 Run_Config_Core_19_2_2015 ^ % Invalid input detected at '^' marker. QAF-DC-4507-CORE(config)#
    I know that the backup files can be fetched directly from Cisco Prime in the Configuration Archives, But also I need to test if we can take a backup directly to the FTP server using Prime.
     Thanks in advance.

    Thank you Bkennedy for replying,
    I changed my template to be as follow:
    #MODE_ENABLE
    copy running-config ftp: 
    $Mgmt_IP_addrress
    $name
    #MODE_END_ENABLE
    but still I am receiving Error like :
    Error : Exception while sending interactive commands to device, Expect timeout: Failed to match expected device output due to Expect timeout current timeout 60000. Current output : Address or name of remote host []? Current expects : (DC-450.{0,30}|DC-4507-AGG)\([^\)]+\)#\s*\z DC-4507-AGG# 
    I believe that we have to tell the Prime how to send the variables to Switch, because the switch is waiting for the remote host IP address and the destination file name???
    DC-4507-AGG#copy running-config ftp:
    Address or name of remote host []? X.Y.Z.W
    Destination filename [dc-4507-agg-confg]?
    % VRF table-id 0 not active
    % VRF table-id 0 not active
    Writing dc-4507-agg-confg !
    24425 bytes copied in 1.500 secs (16283 bytes/sec)
    DC-4507-AGG#

  • Invalid Security role-name error in Web Project

    Hi All,
    I have imported a J2EE application project built in JBOSS into NWDS 7.1.
    While building the project i get the following error
    <b>CHKJ3020E:Invalid Security role-name error: PEHNTAHO_ADMIN</b>
    This error directs me to the following code in web.xml
    <security-constraint>
              <display-name>Default JSP Security Constraints</display-name>
              <web-resource-collection>
                   <web-resource-name>Portlet Directory</web-resource-name>
                   <url-pattern>/jsp/*</url-pattern>
                   <http-method>GET</http-method>
                   <http-method>POST</http-method>
              </web-resource-collection>
              <auth-constraint>
                   <b><role-name>PEHNTAHO_ADMIN</role-name></b>
              </auth-constraint>
              <user-data-constraint>
                   <transport-guarantee>NONE</transport-guarantee>
              </user-data-constraint>
         </security-constraint>
    <b>I have tried out the following things to resolve this issue :</b>
    <b>1) Remove the role manually</b>(as suggested by various people in other J2EE forums), but then some other error came in to picture
    <b>2)Then I added the following code in web.xml</b>
    <security-role>
              <role-name>PEHNTAHO_ADMIN</role-name>
         </security-role>
    Then the above mentioned build error gets resolved, but then I get the following error while deploying the application.
    Dec 3, 2007 12:59:21 AM /userOut/daView_category (eclipse.UserOutLocation) [Thread[Deploy Thread,5,main]] ERROR: Deploy Exception.An error occurred while deploying the deployment item 'sap.com_AnalyticsApp2EAR'.; nested exception is:
         java.rmi.RemoteException:  class com.sap.engine.services.dc.gd.DeliveryException: An error occurred during deployment of sdu id: sap.com_AnalyticsApp2EAR
    sdu file path: D:\usr\sap\CE1\J01\j2ee\cluster\server0\temp\tcbldeploy_controller\archives\191\AnalyticsApp2EAR.ear
    version status: HIGHER
    deployment status: Admitted
    description:
              1. Error:
    Cannot update application sap.com/AnalyticsApp2EAR. Reason: The application sap.com/AnalyticsApp2EAR will not be update, because its validation failed. Reason:
    ERRORS:
    Web Model Builder: com.sap.engine.frame.core.configuration.NameNotFoundException: The parameter/s in String "<?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
         <!-- whole web.xml-->
    </web-app>
    " is/are not defined and could not be substituted., file: AnalyticsApp2.war#WEB-INF/web.xml, column 0, line 0, severity: error
    WARNINGS:
    Web Model Builder: Following tests could not be executed because of failed precondition test "Web Model Builder" : Implicit Constraints Test, JSF Application Test, Mapping Test, Web File Existence Test, Web Class Existence Test, Security Role Test, file: AnalyticsApp2.war, column -1, line -1, severity: warning
    <b>3) I had also added the following code in web-j2ee-engine.xml</b>
    <security-role-map>
              <role-name>PEHNTAHO_ADMIN</role-name>
              <server-role-name>all</server-role-name>
         </security-role-map>
    but still i get the same deployment error.
    Please help me in resolving this problem.
    Can anybody tell me the use of role "PEHNTAHO_ADMIN"?
    Thanks and Regards,
    Sruti

    Hi Malathy,
    Once the users are created in Authentication Provider, and once the roles are created in Weblogic Server, You just have to map users to roles in Jazn-data.xml.
    Could you please let us know you created a roles named users in WLS ?
    Thanks & Regards,
    Murali.
    ============

  • Deploy Office 2010 by using Group Policy - Invalid switch - "/config"

    Hi All,
    We are following steps described in this article -
    http://technet.microsoft.com/en-us/library/ff602181.aspx . However it won't work and will terminate with error code 1 - "Setup ended with error code 1". Further investigations has shown that error is produced by start-up batch script due to Invalid
    switch - "/config". According to the above article to trigger an install we need the following:
    start /wait %DeployServer%\setup.exe /config %ConfigFile%
    However it will fail with the error: Invalid switch - "/config", because obviously "/config" switch does not belong to START command
    It seems to work if we will use the following (without START /WAIT):
    %DeployServer%\setup.exe /config %ConfigFile%
    Could anyone please elaborate on the above?
    Also why would we want to use START /WAIT at all?
    TY

    So, you figured out that this problem occures if path to deployment share, config.xml and setup.exe has spaces in it, that is absolutely true.
    But I see another workaround, not changing your share path to have no spaces in it.
    I suggest changing the setup script.
    Do the following:
    1) Find this part of the script:
    REM If 1 returned, the product was not found. Run setup here.
    :DeployOffice
    start /wait %DeployServer%\setup.exe /config %ConfigFile%
    echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
    2) Use quotes wisely to get something like this:
    REM If 1 returned, the product was not found. Run setup here.
    :DeployOffice
    start /wait "%DeployServer%\setup.exe" /config "%ConfigFile%"
    echo %date% %time% Setup ended with error code %errorlevel%. >> "%LogLocation%\%computername%.txt"
    As you can see, I used quotes to mark those parts of scipt that will have spaces in UNC paths when running the script in cmd.
    It did the trick for me and i have spaces in my UNC path to setup share :) Hope that helps.

  • Invalid Report File Path Error

    I have included several Crystal Reports as embedded resources in a Visual Studio 2010 C# project.  When I try to run the application on a client PC I receive an invalid report file path error.  Why am I receiving this error if the rpt is embedded in the manifest?

    The following code now works on my development machine.  It obtains the server name and database name from the configuration file.  When I run on my client PC, however, it prompts me to log into the database.  It provides the correct server name but the database name is blank and integrated security is not checked.  The database name field is not enabled so I cannot provide a value.
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Windows.Forms;
    using CrystalDecisions.CrystalReports.Engine; //jp
    using CrystalDecisions.Shared; //jp
    namespace WindowsFormsApplication1
        public partial class FormRptArtist : Form
            private CrystalReport1 crReportDocument = new CrystalReport1();
            public FormRptArtist()
                InitializeComponent();
                ToolTip toolTip = new ToolTip(); toolTip.SetToolTip(btnHelp, "Flash Video Training / Help");
                helpProvider1.HelpNamespace = GlobalClass.gb_help;
            private void FormRptArtist_Load(object sender, EventArgs e)
                TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
                TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
                ConnectionInfo crConnectionInfo = new ConnectionInfo();
                Tables CrTables;
                bool repeat = true;
                while (repeat)
                    try
                        crConnectionInfo.ServerName = Properties.Settings.Default.CrystalServer;
                        crConnectionInfo.DatabaseName = Properties.Settings.Default.CrystalDatabase;
                        crConnectionInfo.IntegratedSecurity = true;
                        CrTables = crReportDocument.Database.Tables;
                        foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
                            crtableLogoninfo = CrTable.LogOnInfo;
                            crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                            CrTable.ApplyLogOnInfo(crtableLogoninfo);
                        crystalReportViewer1.ReportSource = crReportDocument;
                        crystalReportViewer1.Refresh();
                        break;
                    catch (Exception exp)
                        MessageBox.Show(exp.Message);
                        DialogResult result1 = MessageBox.Show("Try Again?", "Database Connection Error",
                            MessageBoxButtons.RetryCancel);
                        if (result1 == DialogResult.Retry)
                            FormCrystalParms newWindow = new FormCrystalParms();
                            newWindow.ShowDialog();
                        else
                            repeat = false;
            private void CrystalReport11_InitReport(object sender, EventArgs e)
            private void btnHelp_Click(object sender, EventArgs e)
                GlobalClass.displayflashhelp(this, "formrptartist");     
            private void crystalReportViewer1_Load(object sender, EventArgs e)

  • INVALID END HEADER FORMAT error

    I have just installed the Oracle 9i database on windows NT server, but the
    Oracle Database Configuration Assistant returns INVALID END HEADER FORMAT error, eachtime i attempt to create a new database.
    Oracle 9i software is installed, but no database was created. How can i solve this problem?
    or how can i create the database manaully?
    kayode,
    [email protected]

    Hi,
    If you don't have a database error (ORA-), then you're probably hitting some sort of DBCA bug. I'd use the DBCA to generate scripts and then run the scripts manually to see if you can create a database that way.
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci1054696,00.html
    Are you able to create scripts through DBCA if yes then you can create your database with help of scripts.
    go through below link for manually database creation ( it is also some working in Oracle 9i. After scripts creation. Script creation is different then oracle 10g.)
    http://dbataj.blogspot.com/search/label/Database%20Creation
    if not then you hit bug ( according to above mention link) raise a iTAR.
    regards
    Taj

  • Invalid Web Service URL Error

    I am trying to access define a new webservice system using the WSDL for my local queryview web service.  When I put in the WSDL URL it comes back with a "Invalid Web Service URL" error.  If I put the URL in the Browser address, it successfully brings back the web service information.  Any ideas why I can't define this web service system?
    http://<server>:8001/sap/bw/xml/soap/queryview?sap-client=040&wsdl=1.1
    <server> is a token for posting concerns...
    Thanks!

    I am imagining that the BW QUERY_VIEW_DATA web service complies to the Basic Profile 1.0. 
    And I don't quite understand this part?
    <i>In addition, connections to Web services for SAP backend systems must be performed via logical destinations (configured in the SAP J2EE engine with the Visual Administrator) and not via portal systems</i>
    Since the QUERY_VIEW_DATA Web Service resides on my BW system is the BW system considered a SAP backend system?  Any guidance is greatly appreciated.

  • Invalid factory calendar or error in the factory calendar

    When I am trying to post " Goods issue for consumption:" in T.code MB1A getting below error error
    Invalid factory calendar or error in the factory calendar
    I am made chages in OY05 still facing same issue. Please help me out.

    Hi
    The factory calender is not a mandatory field during configuration, but is required for IM postings to occure.
    Check and maintain factory calender:  SPRO\SAP ref IMG\Enterprise structure\Definition\Logistics general\Define, copy, check, delete plant.
    Regards

  • Usb internet invalid ip invalid ip configuration

    I have a Lenovo tablet a3500-fl
    usb internet invalid ip invalid ip configuration
    I did once connect via usb internet, second time didnt work
    I cant fix this
    error is internet invalid ip invalid ip configuration unidintified network
    tried open control panel network and sharing center change adapter settings local area connection properties and change/unchange Internet protocol version 4 /TCP/IPv¤) to automaticaly and the same to local area connection 2 (which is Lonovo a3500-fls usb internet
    Winndows 7 64
    Windows 8.1 64

    Thank you, enzo46, for your suggestion but I don't understand how it would work to solve the problem. I'n not asking the ISP to assign a pubic IP address to the AEBS. Instead, I'm asking the router/modem, which is acting as the DHCP server for my private network, to assign a private IP address to the AEBS. The ISP has no visibility into my private network and therefore cannot assign a private address to the AEBS. Also, the router and the modem are integrated so I can't unplug them separately.
    On the other hand, if you are suggesting that the router/modem be unplugged to reset its pool of addresses and that I have the AEBS release its currently assigned IP address before trying to reconnect, I can see where that might be helpful

  • Wireless OOB NACissue : OOB Error: connected device client_MAC not found.

    Dear all,
    I've deployed wireless OOB NAC. Some user can login normally, but some other user can not login. The error message is OOB Error: connected device <client_MAC> not found. This only happen at some PC user.
    Does anybody have any idea?
    Thanks

    Dear all,
    When some wireless user cannot login, i usually issue command clear mac address-table dynamic on the switches then the problem is solved temporarily. I wonder why this was happened. Is there any parameter that i need to tune in NAC or WLC or switches?

  • CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

  • Invalid element RenderOptionsSpec - CB error while calling Output Service through web service

    Hi,
          I am trying to call generatePDFOutput from Output Service through web service.
    I have generated the proxy class using RAD webservice client option by http://10.235.0.232:8080/soap/services/OutputService?wsdl
    here is my code
    OutputServiceServiceLocator outputService =new OutputServiceServiceLocator();URL serviceURL =
    new URL("http://10.235.0.232:8080/soap/services/OutputService?blob=base64");OutputServiceSoapBindingStub outputClient =
    new OutputServiceSoapBindingStub(serviceURL, outputService); 
    ((javax.xml.rpc.Stub) outputClient)._setProperty(javax.xml.rpc.Stub.
    USERNAME_PROPERTY,DSC_CREDENTIAL_USERNAME);((javax.xml.rpc.Stub) outputClient)._setProperty(javax.xml.rpc.Stub.
    PASSWORD_PROPERTY,DSC_CREDENTIAL_PASSWORD); 
    //Reference XML data to merge into the PDF document
    BLOB inData =new BLOB();inData.setBinaryData("Input xml in bytes");
    formName =
    "/AdobePOC/Forms/sample.xdp"; 
    //Set PDF run-time options
    PDFOutputOptionsSpec pdfOptions =new PDFOutputOptionsSpec();pdfOptions.setFileURI(
    "repository://"); 
    RenderOptionsSpec renderOptions =
    new RenderOptionsSpec();renderOptions.setCacheEnabled(
    true); 
    BLOBHolder generatePDFOutputPDFDoc =
    new BLOBHolder();BLOBHolder generatePDFOutputMetaDataDoc =
    new BLOBHolder();BLOBHolder generatePDFOutputResultDoc =
    new BLOBHolder();OutputResultHolder outResultHolder =
    new OutputResultHolder(); 
    //Create a PDF Document
    outputClient.generatePDFOutput(TransformationFormat.PDFA, formName,"repository://", pdfOptions, renderOptions,inData, generatePDFOutputPDFDoc,generatePDFOutputMetaDataDoc, generatePDFOutputResultDoc,outResultHolder);
    return generatePDFOutputResultDoc.value;
    I am getting the following error while executing the above code.
    09 17:05:05:407 IST] 00000028 SystemErr R AxisFault
      faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userExceptionfaultSubcode:
    faultString: 
    org.xml.sax.SAXException: Invalid element in com.adobe.livecycle.output.client.RenderOptionsSpec - CBfaultActor:
    faultNode:faultDetail:
    {}faultData:<ns1:exception xmlns:ns1="http://adobe.com/idp/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/><ns2:message xmlns:ns2="http://adobe.com/idp/services">Invalid element in com.adobe.livecycle.output.client.RenderOptionsSpec - CB</ns2:message>
    {http://xml.apache.org/axis/}hostname:A1AIGMD02018
     [6/25/09 17:05:05:407 IST] 00000028 SystemErr R org.xml.sax.SAXException: Invalid element in com.adobe.livecycle.output.client.RenderOptionsSpec - CB[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.createFault( 
    SOAPFaultBuilder.java:222)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.endElement( 
    SOAPFaultBuilder.java:129)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.encoding.DeserializationContext.endElement( 
    DeserializationContext.java:1087)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch( Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.jaxp.SAXParserImpl.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.encoding.DeserializationContext.parse( 
    DeserializationContext.java:227)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.SOAPPart.getAsSOAPEnvelope( 
    SOAPPart.java:696)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.Message.getSOAPEnvelope( 
    Message.java:435)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke( 
    MustUnderstandChecker.java:62)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.AxisClient.invoke( 
    AxisClient.java:206)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invokeEngine( 
    Call.java:2784)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2767)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2443)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2366)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:1812)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.adobe.idp.services.OutputServiceSoapBindingStub.generatePDFOutput( 
    OutputServiceSoapBindingStub.java:579)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.adobe.idp.services.WebOutputService.call( 
    WebOutputService.java:70)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.aig.dbg.cto.service.webService.controller.ServiceCallThroWebService.call( 
    ServiceCallThroWebService.java:13)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.aig.dbg.cto.service.webService.controller.WebServiceHandler.perform( 
    WebServiceHandler.java:92)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.struts.action.ActionServlet.processActionPerform( 
    ActionServlet.java:1787)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.struts.action.ActionServlet.process( 
    ActionServlet.java:1586)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.struts.action.ActionServlet.doGet( 
    ActionServlet.java:492)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.aig.dbg.cto.service.publishing.controller.PubServlet.doGet( 
    PubServlet.java:42)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at javax.servlet.http.HttpServlet.service( 
    HttpServlet.java:743)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at javax.servlet.http.HttpServlet.service( 
    HttpServlet.java:856)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service( 
    ServletWrapper.java:966)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest( 
    ServletWrapper.java:478)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest( 
    ServletWrapper.java:463)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest( 
    WebApp.java:3129)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest( 
    WebGroup.java:238)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest( 
    WebContainer.java:811)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest( 
    WebContainer.java:1433)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready( 
    WCChannelLink.java:93)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination( 
    HttpInboundLink.java:465)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation( 
    HttpInboundLink.java:394)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete( 
    HttpICLReadCallback.java:102)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted( 
    AioReadCompletionListener.java:152)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback( 
    AbstractAsyncFuture.java:213)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions( 
    AbstractAsyncFuture.java:195)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.AsyncFuture.completed( 
    AsyncFuture.java:136)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.ResultHandler.complete( 
    ResultHandler.java:194)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop( 
    ResultHandler.java:741)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.ResultHandler$2.run( 
    ResultHandler.java:863)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run( 
    ThreadPool.java:1510)
    Please help me to fix this error.
    Thanks in advance
    Lavanya.

    Hodmi, Thanks for your reply.
    If i set RenderOptionsSpec values its not throwing Invalid element RenderOptionsSpec - CB error but its throwing ALC-DSC-000-000 internal error
    [6/26/09 17:11:35:021 IST] 00000029 SystemErr R AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userExceptionfaultSubcode:
    faultString: 
    com.adobe.livecycle.output.exception.OutputException: ALC-DSC-000-000: com.adobe.idp.dsc.DSCException: Internal error.faultActor:
    faultNode:faultDetail:
    {}faultData:<ns1:result xmlns:ns1="http://adobe.com/idp/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
    {http://xml.apache.org/axis/}hostname:A1AIGMD01299
     [6/26/09 17:11:35:021 IST] 00000029 SystemErr R  
    com.adobe.livecycle.output.exception.OutputException: ALC-DSC-000-000: com.adobe.idp.dsc.DSCException: Internal error.[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.createFault( 
    SOAPFaultBuilder.java:222)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.endElement( 
    SOAPFaultBuilder.java:129)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.encoding.DeserializationContext.endElement( 
    DeserializationContext.java:1087)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch( Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.jaxp.SAXParserImpl.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.encoding.DeserializationContext.parse( 
    DeserializationContext.java:227)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.SOAPPart.getAsSOAPEnvelope( 
    SOAPPart.java:696)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.Message.getSOAPEnvelope( 
    Message.java:435)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke( 
    MustUnderstandChecker.java:62)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.AxisClient.invoke( 
    AxisClient.java:206)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invokeEngine( 
    Call.java:2784)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2767)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2443)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2366)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:1812)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at com.adobe.idp.services.OutputServiceSoapBindingStub.generatePDFOutput( 
    OutputServiceSoapBindingStub.java:579)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at com.adobe.idp.services.WebOutputService.call(WebOutputService.java)
    [6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.aig.dbg.cto.service.webService.controller.WebServiceHandler.perform( 
    WebServiceHandler.java:76)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at org.apache.struts.action.ActionServlet.processActionPerform( 
    ActionServlet.java:1787)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at org.apache.struts.action.ActionServlet.process( 
    ActionServlet.java:1586)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at org.apache.struts.action.ActionServlet.doGet( 
    ActionServlet.java:492)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.aig.dbg.cto.service.publishing.controller.PubServlet.doGet( 
    PubServlet.java:42)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at javax.servlet.http.HttpServlet.service( 
    HttpServlet.java:743)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at javax.servlet.http.HttpServlet.service( 
    HttpServlet.java:856)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service( 
    ServletWrapper.java:966)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest( 
    ServletWrapper.java:478)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest( 
    ServletWrapper.java:463)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest( 
    WebApp.java:3129)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest( 
    WebGroup.java:238)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest( 
    WebContainer.java:811)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest( 
    WebContainer.java:1433)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready( 
    WCChannelLink.java:93)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination( 
    HttpInboundLink.java:465)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation( 
    HttpInboundLink.java:394)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready( 
    HttpInboundLink.java:274)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators( 
    NewConnectionInitialReadCallback.java:214)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete( 
    NewConnectionInitialReadCallback.java:113)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted( 
    AioReadCompletionListener.java:152)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback( 
    AbstractAsyncFuture.java:213)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions( 
    AbstractAsyncFuture.java:195)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.AsyncFuture.completed( 
    AsyncFuture.java:136)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.ResultHandler.complete( 
    ResultHandler.java:194)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop( 
    ResultHandler.java:741)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.ResultHandler$2.run( 
    ResultHandler.java:863)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run( 
    ThreadPool.java:1510)
    Please help me to fix this also.
    Thanks in advance
    Lavanya.

Maybe you are looking for

  • Jvm startup fails with error when using large -Xmx value

    I'm running JDK 1.6.0_02-b05 on RHEL5 server. I'm getting error when starting the JVM with large -Xmx value. The host has ample memory to succeed yet it fails. I see this error when I'm starting tomcat with a bunch of options but found that it can be

  • Dynamic Table Selection function module

    Dear Friends,   We have got critical requirement on Custom BAPI function module :      we have to pass one field name of table and table name : Eg (Matnr and MARC).      we have to get table contents w.r.t field name of table and table : Has to displ

  • Connecting Airport Extreme to wired Windows

    I'm interested in getting the new Airport Extreme, but I was curious how it is for connecting to Windows via ethernet. I'm specifically talking about Windows 98. Is the Airport Extreme like any typical router when it comes to the ethernet connections

  • Query not using the index

    Query SELECT case.case_objid FROM [email protected] case, table_x_cwp_tickect_details_vw t WHERE CASE.case_condition_cd IN ('OPEN', 'OPEN-DISPATCH', 'OPEN-REJECT', 'OPEN-RETURNED') AND case.case_type_cd in ('CUSTOMER FAULT', 'CHRONIC','SC

  • CORUPROC (Process chain for confirmation, collective background processing)

    Hello Guru, Can you please explain me the program CORUPROC (Process chain for confirmation, collective background processing) that can be use in SE38. and how it its important for CO16N (Reprocessing Incorrect Production Order)? CORUPROC is also the