OOF not working after Exchange 2010 install

I have a Exchange 2007 server environment where I recently installed a new Exchange 2010 server. After installing the 2010 server, my clients are receiving the following error when trying to configure OOF. "Your automatic reply settings
cannot be displayed because the server is currently unavailable. Try again later." I've not moved any mailboxes to the new server, just installed it.
I've done all the tests I can find online and all pass without issue. I'ma able to get to the OOF URL without issue as well.
The 2007 server is on SP 3 rollup 12.

Hi,
The above problem generally occurs because the CAS server uses the credentials that you used to log on to Windows instead of the credentials that you used to log on to the mailbox in Outlook. I recommend you install the hotfix in the following KB to solve
this issue.
"Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later" error when you try to open the Out of Office Assistant in Outlook 2010
http://support.microsoft.com/kb/2596516
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support
Not sure that would be the issue with every machine on the network, plus the user I'm logging in with is the mailbox I need to access so the credentials should be the same.

Similar Messages

AutoDiscover not working after Exchange 2010 SP2 - SP3 update.

Hi Everyone,
I'm sorry if this is a really simple thing, but i've played around for hours and exhausted google.
I run a 2010 exchange server for everyone at the office, and today I updated from 2010 SP2 to SP3.
The problem I have is auto discover no longer accepts anyones username or password. If you set the account up on the client machine by manually entering the details everything works great.
All the DNS records are correct and have been working for 2+ years. I have recreated the Autodiscovery virtual directory in EMC.
If i manually browse to mydomain/Autodiscover/Autodiscover.xml, when asked for a username and password it says it incorrect. I can then log in to OWA with the same credentials and it works.
Thanks,
Garrett
The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://mydomaincom.au:443/Autodiscover/Autodiscover.xml for user mydomain.com.au.
The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response.
Additional Details
An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).
HTTP Response Headers:
Transfer-Encoding: chunked
Connection: keep-alive
Content-Type: text/html
Date: Wed, 22 Apr 2015 00:44:51 GMT
Set-Cookie: __cfduid=dc0261b4643b5dbe27f750bbc28bfef7c1429663490; expires=Thu, 21-Apr-16 00:44:50 GMT; path=/; domain=.macarthurcs.com.au; HttpOnly
Server: cloudflare-nginx
WWW-Authenticate: Negotiate,NTLM,Basic realm="mydomain.com.au"
X-Powered-By: ASP.NET
CF-RAY: 1dad4d701ae911c5-SJC
Elapsed Time: 3357 ms.
Attempting to test potential Autodiscover URL https://autodiscover.mydomain.com.au:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.

Hi,
Based on my knowledge, the above issue is caused by the loopback check being enabled. Please follow the steps below to disable loopback on the CAS servers:
1. Run regedit, in Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
2. Right-click Lsa, point to New, and then click DWORD Value.
3. Type DisableLoopbackCheck, and then press ENTER.
4. Right-click DisableLoopbackCheck, and then click Modify.
5. In the Value data box, type 1, and then click OK.
6. Quit Registry Editor, and then restart your computer.
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

Touchsmart 320-1030 Touchscreen is not working after OS re-install

HDD crashed, and was replaced with new, re-installed system from factory recovery CDs, now touch screen does not work. I have re-installed the drivers to no avail. system Properties says under Pen and Touch: No Pen or Touch Input is available for this Display. It used to work before the hard drive crashed. Is there a setting in the BIOS? or something else I may have missed?
Thanks

Hello @ncmich2,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the Touchscreen of your desktop computer is not working after replacing the Hard Drive, and I would be happy to assist you in this matter!
To re-enable the touchscreen features on your computer, I recommend re-installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Free/Busy availability and Out of Office not working after Exchange 2003 to Exchange 2010

We just migrated from Exchange 2003 to Exchange 2010 as an intermediate step before we get to Exchange 2013. I want to make sure everything is working OK before we start the migration to Exchange 2013.
The users have Outlook 2010, and there are 2 issues. They can't view free/busy times for other people using the scheduling assistant, and they can't set their Out of Office messages. If they go in through Outlook Web Access, then these features
work!
I've searched the forums, and I see a few similar issues, but I don't think this is related to the .Net issue on the CAS server.
Any suggestions?
Thanks!
--Kent

Hi Kent,
Try checking the free busy info Outlook 2010 with running /cleanfreebusy switch
Check the Free/Busy System Public Folder and pointed out to the correct server on each mailbox DB in Exchange 2010
Find the public folder replica database
get-publicfolder -Identity "\NON_IPM_SUBTREE\SCHEDULE+ FREE BUSY" -Recurse | fl name,Replicas
In E2k10 check if the exchange 2003 is added in the replica list. If not try adding them and check.
force Public folder content replication.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.
That will encourage me - and others - to take time out to help you.
Regards,
Sathish

SME 7.1 not working with Exchange 2010 SP3 UR8v2 and OnTap 8.2.3 7mode

Followed IMT and installed software that NetApp said would work.Ontap 8.2.3 7-modevmWare 5.0 SP3Microsoft Windows Server 2008 R2 SP1Exchange 2010 SP3 UR8v2NetApp Host Tools 6.0.2SnapDrive 7.1.1SME 7.1 Everything connects fine. SnapDrive sees my drives. SME connects to Exchange Server. However in the process of configuring SME, I get the following error. I have followed knowledge base article and increased the timeout of DFM connection in registry, but that has not solved the problem. Has anyone run into this before? SME 6.1 works fine, but is not compatible with SnapDrive 7.1.1 (causes verifications to fail because server can't mount clone) and lower SnapDrive versions are not compatible with Ontap 8.2.3. I am in a real bind here. Thanks in advance.

the following configuration for SME 7.1 is no longer supported: Windows Server 2008 R2Exchange 2010 SP3 RU1 – RU5WMF/PowerShell 3.0SME 7.1 The supported configuration will now be: Windows Server 2008 R2Exchange 2010 SP3 RU5WMF/PowerShell 4.0SME 7.1 this is because Microsoft does not support WMF 3.0 on Server 2008 R2 running Exchange 2010 SP3, with any RU version.SME 7.1 requires a minimum of PowerShell 3.0 (part of WMF 3.0) in order to run. Feel free to review the Exchange Server Supportability Matrix located here: https://technet.microsoft.com/en-us/library/ff728623%28v=exchg.150%29.aspx. All existing documentation (ISG, Admin Guide, IMT) will be updated shortly to reflect this change in requirements. hope that helps,Domenico.

Outlook 2013 Category view not updating after Exchange 2010 SP3 RU3

After updating to Exchange 2010 SP3 RU3 last night, users who use categories view in Outlook 2013 are complaining that the view does not update. The alert is received in the notification area and the unread message count next to Inbox updates appropriately.
The view can be force updated by switching between All and Unread, by using Reset View, or closing and opening Outlook. It seems anything that forces a 'redraw' of the view will update it - except for the actual reception of email. I easily replicated
this issue. For reference:
Exchange 2010 SP3 RU3
Windows 7 x64 Ent
Outlook 2013 (15.0.4551.1004) 32-bit
I do see that SP3 RU4 has been released, however the only change listed is a security patch.
Thank you for any ideas.

Hi, Everyone –
This has been a known issue for a very long time – we have people at our workplace that are very disappointed since a feature as great as categorizing email (not using tasks) has become broken and has not even been considered to be fixed for
over half a year. It was not fixed in the updates for Patch Tuesday this week.
I would like to confirm that this is an issue with Outlook 2010 and 2013 when running the latest Exchange 2010 and there is NO FIX
– I have scoured the internet for a solution – all proposed "textbook" solutions do not work and I am positive that the issue can be recreated; however, everyone from Microsoft does not mention trying to recreate the issue at all.
The workaround of creating a rule to send new emails to a category could break other pre-existing rules and cause more frustration and wasted time for users/IT before and after the issue is fixed.
Please fix this issue sooner than later, as the Categories view is completely broken and unusable at this point in time.
Regards,
IT Helper

Scan to Email from VPN sites not working on Exchange 2010

Hi,
       I have Exchange 2010 SP1 with HCAS array installed in the organization. We have site offices connected through site to site VPN. All our outlook clients are working fine in the sites. We have MFP printers in both Head
office and site offices. HO scanners are working fine for Scan to email (Internal recepients), but site offices scanners are able to send the email without any attachment. We have tried creating new receive connectors for the scanner with anonymous authentication,
but still attachments were not receiving. Log found in the printer as shown below.
1 page(s)
Document Size:A4
Subject:Scanned File from SS AUH Printer
E-mail Destination(s)
to: [email protected] (Success)
E-mail processed by the Device
File format: pdf (color)
File Size:0
I have configured Valid mailbox as the SMTP authentication and from Address for the scanner and the User received the following delivery failure report
******* HP Digital Sending: Delivery Error *****
The following job has not been delivered. Please retry sending the job. If the problem continues contact your network administrator.
----- Transcript/error-code of session follows -----
0/33 (0X21)
Kindly advice.
Regards,
Emthias
With Regards, Emthias Abdulsalam

Hi
   >>HO scanners are working fine for Scan to email (Internal recepients), but site offices scanners are able to send the email without any attachment. We have tried creating new receive connectors for the scanner with
anonymous authentication, but still attachments were not receiving.
    I have question about these sentences. If I misunderstand your saying, please correct me.
    1. Have scanners function to send email to exchange system?
        Did you test it before?
Do you try to send email to another account like (windows live,yahoo)?
    2. According to your error log, it seems to be network configuration problem.
        Do you modify network configuration of scanner?
    3. Can you check transport rule of your server?
You can read this
article. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Setting Out Of Office from Outlook not working with exchange 2010

Hi
We have an exchange 2010 server with 2 load balanced CAS server and Mailbox servers in a DAG. We have a few domain
names accepted (will call it firstdomain.com and seconddomain.com) but only one is in certificate (firstdomain.com).
The issue is - when user with default email @seconddomain.com try to set “Out Of Office” from outlook (2010 with all service
packs and updates) he is getting “ Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later” where
setting it from webmail works fine and setting it from outlook for users with @firstdomain.com reply address works fine.
we have both internal and external urls for all virtual directories set to external
host address (https://mail.firstdomain.com
  etc). All the users are on intranet with local ip subnets (sites connected via vpns ), all the routing is in place and DNS points to correct ip addresses.
Autodiscover works fine (tested in outlook ) and giving correct address for OOF link
( https://mail.firstdomain.com/ews/exchange.asmx)
wich opens fine if entered into address bar in IE so its NOT AN AUTODISCOVER issue .
I enabled logging in outlook and thats what I am getting in there:
We have an exchange 2010 server with 2 load balanced CAS server and Mailbox servers in a DAG. We have a few domain
name accepted (will call it firstdomain.com and seconddomain.com) but only one is in certificate (firstdomain.com).
The issue is - when user with default email @seconddomain.com try to set “Out Of Office” from outlook (2010 with all service
packs and updates) he is getting “ Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later” where
setting it from webmail works fine and setting it from outlook for users with @firstdomain.com reply address works fine.
we have both internal and external urls for all virtual directories set to external
host address (https://mail.firstdomain.com
  etc). All the users are on intranet with local ip subnets (sites connected via vpns ), all the routing is in place and DNS points to correct ip addresses.
Autodiscover works fine (tested in outlook ) and giving correct address for OOF link
( https://mail.firstdomain.com/ews/exchange.asmx)
wich opens fine if entered into address bar in IE so its NOT AN AUTODISCOVER issue .
I enabled logging in outlook and thats what I am getting in there:
1600       0x49763D20        02/02/15 16:50:44
+++++++++++++++++++++++++++++++
1600       0x49763D20        02/02/15 16:50:44
OWINHTTP SEND HTTP REQUEST BEGIN
1600       0x49763D20        02/02/15 16:50:44
Profile=Outlook
1600       0x49763D20        02/02/15 16:50:44
  [email protected]
1600       0x49763D20        02/02/15 16:50:44
URL=https://mail.firstdomain.com/ews/exchange.asmx
1600       0x49763D5F        02/02/15 16:50:45
GetLastError=0; httpStatus=401.
1600       0x49763D5F        02/02/15 16:50:45
OWinHtpp disabled auth schemes:
1600       0x49763D5F        02/02/15 16:50:45
<NONE>
1600       0x49763D5F        02/02/15 16:50:45
OWinHtpp supported auth schemes:
1600       0x49763D5F        02/02/15 16:50:45
Negotiate
1600       0x49763D5F        02/02/15 16:50:45
NTLM
1600       0x49763D5F        02/02/15 16:50:45
Basic
1600       0x49763D5F        02/02/15 16:50:45
OWinHttp attempting Auto-Negotiate with Desktop Credentials.
1600       0x49763D5F        02/02/15 16:50:45
OWinHttp USING pcreds->dwAuthScheme:
1600       0x49763D5F        02/02/15 16:50:45
Negotiate
1600       0x49763D9D       02/02/15 16:50:45
GetLastError=0; httpStatus=500.
1600       0x49763DAD       02/02/15 16:50:45
OWINHTTP SEND HTTP REQUEST END
1600       0x49763DAD       02/02/15 16:50:45
Last thing - we are using proxy server and with proxy off it works fine although all
possible exchange server hosts/domains/ip addresses excluded from proxy.
Aside from obvious question - what can be wrong and what to test next, another question
is - how can I check/monitor setting OOF on server side (log files etc)?
Last thing - we are using proxy server and with proxy off it works fine although all
possible exchange server hosts/domains/ip addresses excluded from proxy.
Aside from obvious question - what can be wrong and what to test next, another question
is - how can I check/monitor setting OOF on server side (log files etc)?
Thanks

Hi,
According to your description, I understand that Outlook client with second domain name cannot use OOF setting and get an error “Your Out of Office settings cannot be displayed, because the server is currently unavailable.” However OWA works fine.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account or some special user experience this question.
Would you please try to reconfigure Outlook profile in other Computer, Outlook version and return the results?
If this issue only appeared on Outlook 2010, please refer to below link to troubleshooting:
https://support.microsoft.com/kb/2596516?wa=wsignin1.0
Please try to run ExBPA to test OOF to get more details about this question. Additional, I find a similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/exchange/en-US/81ebc1de-c899-4097-b224-a0e4b33e4162/users-cant-open-out-of-office-assistant
Best Regards,
Allen Wang

Keyboard and Touch-Pad Not Working After Having to Install New Hard Drive

I had to install a new hard drive in my HP Pavillion DV9700t that has Vista Home Premium 64-bit. After going through the recovery process with backup disk the built in keyboard and touch-pad do not work. During the installation, an error message came up saying something along the lines of "the drivers are not supported by this verison of windows because they are unsigned." The drivers that had that error were "hpqkbfiltr keyboard filter driver," "HP remote control HID Device," and "hpqkdfilter driver." I tried to update the drivers for the keyboard from the hp website, but the keyboard and touch-pad still do not work.
My question is, where do I find the digitally signed drivers for the keyboard and touch-pad that Vista won't flag and disable?
Help please!

Sparkles,
Thanks for the suggestions.
When dealing with MS Fix It, I was choosing run. Upon further investigation on that site, there really isn't a scan that applies to my issue anyways I tried the .NET Framework repair tool, and that seemed to work. It told me to try re-running what I was having issues with, so I tried running the Windows PowerShell again, but again was faced with the following message "windows update standalone installer encountered an error: 0xc8000247." I went back to the .NET screen and hit "Next" because it didn't work, and that responded by saying they were going to submit logs to Microsoft. I won't hold my breath on that one.
I'm to the point where I honestly don't care anymore. I have no idea what to do, because doing a clean install with the discs HP sent me isn't going to help because they are just recovery discs, and not an actual Windows disk. This is the second hard drive I have had to put into my laptop and use those recovery disks on in the last 3-years. The built-in keyboard hasn't worked during that time frame on either hard drive. I don't think the recovery disks I was sent install properly. Not sure where to go from here. I spent way too much money on this laptop years ago having it custom built to handle all of my drafting programs, so I don't want to just kick it to the curb. I was looking into the possibility of just replacing it, but I cannot stand the Windows 8 interface.
I guess I should have fixed the issue with the keyboard on this hard drive before loading all of my programs. Between the recovery disk install, formatting of the hard drive, and installing all of my programs it took well over 12 hours. Not really looking forward ot that again Then there's shockwave and flash and all of the other goodies that my recovery disks won't restore anyways.
Sorry if this seems like a negative post, but I'm just tired of trying to no avail. Maybe I should just take it somewhere to get it looked at, but I can't see them being successful if the recovery disks won't help anyways.
Thanks for you help,
MadBuch

Siri does not work after IOS 7 install

Siri doesent work after I OS 7 install I hear it is a hardware problem. Siri works fine but then you download IOS seven and it stops working. Apple has told a couple people they have to buy a new phone. I hope thats not true. Because I will buy a new phone but it wont be apple if thats the case.

Hello, Dan.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the article below when experiencing issues with Siri.
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Cheers,
Jason H.

Secondary monitor does not work after OS X install

My secondary monitor does not work well after OS X install. The image on my secondary monitor is different even the screen svaer image is different and the mouse can not be seen.

Try the easy thing first - NVRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that does not work, post back with more info, including the version of Mac OS you are running. How is the external monitor connected, did it ever work, and from what OS X to what was the "OS X install" in your title?

Thunderbolt is not working after Mountain Lion installed

I'm putting this discussion again because the problem didn't solve like I thought !
As you can see from the title that I have a problem already after I installed the new OS X Mountain Lion. I got my thunderbolt to Hdmi adabtor connected to an LCD TV and it was working great with snow lepord. But after the I installed Mountain Lion. it won't even recognize that there is something connected and I don't see the options in my System Prefrences> Diplays like before.
I already run software update and it's all up to date and also done a PRAM reset and nothing changed.
It only ok for a couple of min. if I restarted it and without the sound working from the LCD TV.
Please I need help here.

Well I would have hit repair. This might be stemming from a deeper issue with the installation. I've never seen that dialogue box before, and if ignoring it and booting normally worked for you then I say you did the right thing.
however
I would, go to disk utility and then select your boot drive and verify and repair disks and permissions.
if anything else WEIRD should occur, you may want to go to the recovery partition of ML (cmd+R while hearing the boot chime) and reinstalling ML. That dialogue box you mentioned is strange and should be noted. A reinstall will probably fix whatever issue comes up.

Iphoto not working after time machine install

I have a first gen intel iMac and the hard drive had a sudden failure I was not overly concerned about my Data as I use time machine. I had a new Hard Drive installed and I used time machine to install back to snow leopard. all seems fine for a few days and every thing (software and hard ware (scanner)) was working fine. then I opened iPhoto to add a few new photos and all I get is the spining beach ball the library is 26 gig in size and was working fine before. I am at a loss as I still have all 9745 original photos on back up drive but not in order like in iPhoto and really don't want to recreate my library all over again. I've done disk permissions and only seem to have a problem with Java any body got any ideas?

Hi there Guys
I don't know if this is a true fix but my iPhoto 11 is now working iPhoto had an update and I did it to both my iPhoto programs (mac book and iMac) I then opened the not working librery on the laptop and it said the library need to be updated it did this and opened okay and all was working fine (I copied library on to a portable FireWire HD) when I copied it back to my iMac it said the same and went through the update and is now working fine.

OOF not working after Exchange 2010 install

Similar Messages

Maybe you are looking for