Free/Busy availability and Out of Office not working after Exchange 2003 to Exchange 2010

We just migrated from Exchange 2003 to Exchange 2010 as an intermediate step before we get to Exchange 2013.  I want to make sure everything is working OK before we start the migration to Exchange 2013.  
The users have Outlook 2010, and there are 2 issues.  They can't view free/busy times for other people using the scheduling assistant, and they can't set their Out of Office messages.  If they go in through Outlook Web Access, then these features
work!
I've searched the forums, and I see a few similar issues, but I don't think this is related to the .Net issue on the CAS server.
Any suggestions?
Thanks!
--Kent 

Hi Kent,
Try checking the free busy info Outlook 2010 with running  /cleanfreebusy switch
Check the Free/Busy System Public Folder and pointed out to the correct server on each mailbox DB in Exchange 2010
Find the public folder replica database
get-publicfolder -Identity "\NON_IPM_SUBTREE\SCHEDULE+ FREE BUSY" -Recurse | fl name,Replicas
In E2k10 check if the exchange 2003 is added in the replica list. If not try adding them and check.
force Public folder content replication.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.
That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Similar Messages

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
    Make sure all your data is available on your computer for manual syncing later.
    Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
    And you are using iTunes 10.7?
    I'm just trying to help get you going.

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • Keyboard delete and caps lock keys not working after update

    Shortly after a windows update two keys, delete and caps lock do not work. I have tried the following
    1. system restore..it says it cannot restore as a file is missing. I have used this function before without any problem.
    2. Update key board driver (standard PS/2)..it says latest version is installed.
    3. Uninstall and reinstall.
    4. Reset using the remove batteryt hold down power key option.
    The caps lock and delete does not work in Notepad or MS Word.
    It seems unlikely that the two keys themselves are damaged as it is unlikely that they would both fail at the same time and the problem after the windows undate is suspicious.
    I am using Windows 7 Home premium on a 64 bit HP G62.
    help appreciated as ever
    thanks
    matyiii

    matyiii wrote:
    Thanks I am beginning to suspect the same thing. I will try keyboard replacement as a last resort.....no fun to buy a new key board and have the problem persist...
    regards
    Matyiii
    Here's another test...since your laptop has USB ports get or borrow a USB keyboard and try it and if all those keys work and test then the results would mean your laptop keyboard has stop functioning as least you narrow done the problem.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • IPad 2 front and back camera is not work after update iOS 7.0.4 it gives like the resolution is not adjusted

    After updating my ipad 2 to iOS 7.0.4 , front and back camera is not working it gives like very small dots or dash. I did restore from iTunes and reset by holding on the home and sleep button, I also tried to close the app from the task bar but still all trials didn't solve the problem.

    I haven't heard of this before so I doubt it's a bug. Probably something happened during the 7.04 download.
    Backup your iPhone to iTunes and restore it as a new iphone, then restore from the backup. This will give you a fresh copy of iOS 7.04.

  • Apple Mail and Exchange Out of Office Not Working

    Has anyone had issues with Yosemite Mail and setting Out of Office for Exchange 2010?
    I can set Mail to send Out of Office replies but cannot change the scheduled dates from 2/12/1982, 10:00 AM. Even when I do set it, it does not seem to send the OOO notifications. I can set it just fine on my iPhone 6 and Mavericks Mail worked fine for setting the OOO.
    I deleted my account several times and reset it and I can get all my Mail back just fine but OOO still doesn't work correctly. I wanted to try to change the server settings but Mail doesn't allow you to do that for auto connect Exchange accounts.
    Because of this (and my concern with reported issues with updating meetings), I switched back to Outlook 2011 until these bugs get ironed out. This is too bad because I love the notifications feature for Apple's programs.
    I'm running on a 2014 13" MacBook Pro.

    Same issue here. I can see these error messages repeating when I'm trying to change the date.
    2014-12-11 02:29:23,447 Mail[87049]: (
      0   CoreFoundation                      0x00007fff900d564c __exceptionPreprocess + 172
      1   libobjc.A.dylib                     0x00007fff990b86de objc_exception_throw + 43
      2   CoreFoundation                      0x00007fff900d86bd -[NSObject(NSObject) doesNotRecognizeSelector:] + 205
      3   CoreFoundation                      0x00007fff9001fa84 ___forwarding___ + 1028
      4   CoreFoundation                      0x00007fff9001f5f8 _CF_forwarding_prep_0 + 120
      5   AppKit                              0x00007fff8f1e61de -[NSDatePickerCell(NSInternal) _constrainAndSetDateValue:timeInterval:sendActionIfChanged:beepIfNoChange:retur nCalendarToHomeMonth:preserveFractionalSeconds:] + 259
      6   AppKit                              0x00007fff8f1ea5da -[NSDatePickerCell(NSTextFieldWithStepperDatePickerInternal) _commitSubfieldFieldChanges] + 1292
      7   AppKit                              0x00007fff8f1e6528 -[NSDatePickerCell(NSInternal) _finishPendingEdit] + 53
      8   AppKit                              0x00007fff8f1e969d -[NSDatePickerCell(NSTextFieldWithStepperDatePickerInternal) _textFieldWithStepperTrackMouse:inRect:ofView:untilMouseUp:] + 648
      9   AppKit                              0x00007fff8f1e51c8 -[NSDatePickerCell trackMouse:inRect:ofView:untilMouseUp:] + 159
      10  AppKit                              0x00007fff8f018139 -[NSControl mouseDown:] + 714
      11  AppKit                              0x00007fff8f511f4f -[NSWindow _reallySendEvent:] + 12827
      12  AppKit                              0x00007fff8ef9c50c -[NSWindow sendEvent:] + 368
      13  AppKit                              0x00007fff8ef4e096 -[NSApplication sendEvent:] + 2238
      14  Mail                                0x0000000106c767d0 Mail + 272336
      15  AppKit                              0x00007fff8eddae98 -[NSApplication run] + 711
      16  AppKit                              0x00007fff8edc62d4 NSApplicationMain + 1832
      17  libdyld.dylib                       0x00007fff8fbe05c9 start + 1
      18  ???                                 0x0000000000000001 0x0 + 1
    2014-12-11 02:29:23,613 Mail[87049]: -[NSDateComponents timeIntervalSinceDate:]: unrecognized selector sent to instance 0x6180005423c0
    2014-12-11 02:29:23,613 Mail[87049]: -[NSDateComponents timeIntervalSinceDate:]: unrecognized selector sent to instance 0x6180005423c0

  • Free/Busy not working after mailbox migration to Exchange 2013

    I'm in the process of migrating user mailboxes from Exchange 2007 to Exchange 2013
    It seems that many of the users (not all) are having problems seeing free/busy once they have been migrated.  If we remove the Outlook profile and recreate it, all is good.  Problem is that this is happening to more and more people.  Everyone
    is on Outlook 2010
    Test-OutlookWebServices -ClientAccessServer Ex2013 -identity MyName -MailboxCredential $cred    Results in:
     Autodiscover: Outlook Provider Failure
     Exchange Web Services          Failure
     Availability Service           Skipped
     Offline Address Book           Failure
    The same if I run that command against the Exchange 2007 server.
    What am I doing wrong?

    I should have mentioned that.  Yes, OWA works perfectly for the affected users.  Just as deleting their Outlook profile and recreating a new one does.
    Results of Get-WebServicesVirtualDirectory:
    Identity    : Exch2007Srvr\EWS (Default Web Site)
    InternalUrl : https://legacy.company.com/EWS/Exchange.asmx
    ExternalUrl : https://legacy.company.com/EWS/Exchange.asmx
    Identity    : Exch2013Srvr\EWS (Default Web Site)
    InternalUrl : https://mail.company.com/ews/exchange.asmx
    ExternalUrl : https://mail.company.com/ews/exchange.asmx
    The URL you reference above is actually the site I used to perform migration.
    What's interesting (at least to me) is that on my machine I did not have any issues with seeing calendars. The Test E-mail AutoConfiguration (without Guessmart), I get prompted for my password over and over; however, after clicking on cancel I
    get:
    Attempting URL
    https://mail.company.com/autodiscover/autodisconver.xml found through SCP
    Autodiscover to
    https://mail.company.com/autodiscover/autodisconver.xml starting
    GetLastError=0;httpStatus=401
    GetLastError=0;httpStatus=401
    GetLastError=0;httpStatus=401
    GetLastError=0;httpStatus=401
    GetLastError=0;httpStatus=401
    Autodiscover to 
    https://mail.company.com/autodiscover/autodisconver.xml Failed (0x80040413)
    Attempting URL 
    https://autodiscover.company.com/autodiscover/autodisconver.xml found through SCP
    Autodiscover to
    https://autodiscover.company.com/autodiscover/autodisconver.xml starting
    GetLastError=0; httpStatus=200.
    Autodiscover to
    https://autodiscover.company.com/autodiscover/autodisconver.xml Failed (0x800C8203)
    Autodiscover to https://company.local/autodiscover/autodiscover.xml starting
    GetLastError=12029; httpStatus=0
    Autodiscover to https://company.local/autodiscover/autodisconver.xml Failed (0x80004005)
    Autodiscover to
    https://autodiscover.company.local/autodiscover/autodisconver.xml starting
    GetLastError=0; httpStatus=0
    GetLastError=0; httpStatus=200
    Autodiscover to
    https://autodiscover.company.local/autodiscover/autodisconver.xml Failed (0x800C8203)
    Local autodiscover for company.local starting
    Local autodiscover for company.local Failed (0x8004010F)
    Redirect check to
    https://autodiscover.company.local/autodiscover/autodisconver.xml starting
    Redirect check to
    https://autodiscover.company.local/autodiscover/autodisconver.xml Failed (0x800C820D)
    Srv Record lookup for hydraforce.ads starting
    Srv Record lookup for hydraforce.ads Failed(0x8004010F)
    However, when I did this on a system that cannot see any calendars, it all works perfectly.
    Browsing to
    https://autodiscover.hydraforce.com/autodiscover/autodiscover.xml does result in Error Code 600

  • Out of Office not working

    Hi 
    I got stuck around a issue where in out of office is not working .. although I am able to set back out of office from outlook and OWA but do not receive any response for either internal or external .  There are no rules in-place , also tried deleting IPM.Note.Rules.OofTemplate.Microsof
    from Mfcmapi but no luck so far . Please suggest.
    Aditya Mediratta

    Hi Aditya,
    1.Please disable the out of office and re enable it again and at the same time please check the oof is enabled on the owa.
    Set-MailboxAutoReplyConfiguration “[email protected]” –AutoReplyState Disabled -InternalMessage $null -externalmessage $null
    Set-MailboxAutoReplyConfiguration “[email protected]” –AutoReplyState enabled -internalmessage "out of office" -externalmessage "out of office"
    2.Check the event logs on the mailbox server for the event ID "3004"
    3.On problematic user mailbox ,just take a backup of all the rules from outlook client and then delete those rules and then disable the OOF and re enabled it again.If we have the crossed the rules quota thenOOF message will not generated from that mailbox as
    well as we will be getting the event ID 3004 on the mailbox servers.
    If In case on the above step if you don't  wanted to delete the existing rules then we can increase the rules quota size and check the oof message is generated or not.
    Get-Mailbox –Identity "nithya" | fl RulesQuota
    Set-Mailbox –Identity "nithya" –RulesQuota 256KB
    4.To check it is for an single user or else for the whole organisation you can make use of creating the test mailboxes and check the results.
    If the problem is on the organisation wide : -
    1.Make sure exchange mailbox assistant service is running on the exchange servers.
    2.Then make sure the EWS url's are properly configured on the exchange servers as well as check the autodiscover funtionality too.
    3.Then for the remote domains to receive oof message we need to allow external oof messages on the remote domain configuration .
    Thanks & Regards S.Nithyanandham

  • Pinch in and out on trackpad not working to zoom in and out in firefox

    Ever since i bought my macbook pro (early 2011) I was able to use the pinch in and out trackpad feature to zoom in and out in firefox. This suddenly stopped working a couple of days ago. It still works in safari so this seems to be Firefox specific. All other trackpad features are still working too.
    I uninstalled Firefox on my mac by moving the Firefox icon to the trash and downloaded/installed it again. Note that i didn't delete my profile (just deleted the Firefox icon) so all bookmarks were preserved even after downloading and installing Firefox from scratch. This didn't help fixing the issue.
    Any ideas on this problem ? how to fix it?
    Thanks!

    All these programs seem to be for windows. I am facing the issues with firefox on a macbook pro.
    I wasn't suggesting resetting Firefox. I have already done this step a couple of days ago as I was facing connectivity issues with some websites completely freezing and not loading. reset didn't help. I started seeing the trackpad issue around the time i did the reset.
    I am wondering if uninstalling Firefox and deleting all data associated with it (profiles etc) would fix the issue. Can you advise on what should be deleted with firefox?

  • In and out point feature not working

    I am a teacher at a tech school and I teach Premiere Pro CS5.5  I teach my students how to use the in and out points in the source clip monitor and then to select the button to insert or overwrite that section to the time line.  I also teach them how to use the in and out point in the timeline monitor and then to select the button to lift or extract that section from the time line.  For some reason this works for most of the students, but not for all.  I actually had it happen to my project during a demonstration.  Sometimes the action that you wanted on the timeline will not happen.  The playhead may slide over like it worked, but the clip is not there or the extraction never happened.  I check all the other video tracks to try to see if it is on another track, but it is not.  The fact that it works for some students and not others, makes me think that maybe it has to do with the type of video clip they are working with (similar to the mono/stereo/5.1 differences with audio clips).  I have to be missing something.  Help!

    You didn't say Mac or Windows, but my experience on Mac is that some features of Pr 5.5.2 just stop working, and can only be brought back by an app relaunch, a reboot, or by trashing the preferences (Hold option down while launching from the Dock.).
    But... some of what you describe could also be caused by not selecting the track selectors in the Timeline panel properly.

  • Mute button, low volume button and high volume button not working after upgrade to Win7 Pro

    Hi all, Im using X301. Previously it was shipped with the Vista Business. I was entitled for free upgrade to Win7 since the thinkpad was bought after 25th of June 09. The problem started after I successfully upgraded my Vista to Win7 Pro. My Mute/Unmute button was consistently in amber colour (signal for disabled). the volume button also is not working anymore. On the system side, everything was fine. the drivers is working properly.. the windows also is showing the volume is in a good shape. Unfortunately the button on the thinkpad is always on the disabled mode. Ive been searching for a related drivers that i could download and solve the issue. but till now all the softwares and drivers downloaded from lenovo could not solve my problem. any suggestion or comment is highly appreciated. thanks a million

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Wecam and USB mic input not working after upgrade to Lion

    The audio inputs (micraphones) all show up in Syetem Preferences but if I talk into the microfones (on USB soundcard/Trust Webcam) no levels are  being shown, I have tried clicking on eatch input it turh but n luck.
    I am getting the impresion Lion broke lots of audio atuff so dont hold up mutch hope for a solution (Except upgrading to Snow Leperd).
    Any ideas,
    Ben

    Beginning with Leopard, Mac OS X supports the so-called UVC web-cameras, you do not need any driver for them. I have just bought a small, pretty and cheap one, Logitech C110.
    My older Genius 1321 is unfortunately unusable from SL onwards, but works with Tiger and Leopard. It is not UVC, and drivers are not available any more.
    conclusion: if your camera is not UVC will not work via ‘plug-and-use’, you need an updated driver, check with the manufacturer. If they do not offer any, buy a UVC one, they are very cheap, but you do not need anything. The one I have just bought works fine, and also has internal mic.

  • Satellite L305D-S5881: Touchpad and FN keys do not work after Win 7 installation

    I have recently installed windows 7 and all of a sudden yesterday my touchpad did not work.
    I was not able to move my mouse arrow at all.
    I had to purchase a wireless mouse so I could use my laptop.
    When I press the fn key plus f9 nothing happens to see if it is enabled or disabled.
    I have a satellite l305d-s5881
    thanks for your help

    Hi mate
    The Satellite L305D-S5881 belongs to the Toshiba US series and has been released for US market.
    You will need to visit the Toshiba US driver page in order to get all drivers.
    To get the touchpad working, you will need to install the Touchpad driver.
    Furthermore the FN buttons are controlled by VAP (value added package) and Flash Card Support Utility.
    You need to install both; firstly VAP and then Flash Cards.
    Here is the Toshiba US page:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
    Greets

Maybe you are looking for