Oops message in i915 macbook
Recently I started being unable to boot linux in my Macbook. The console (framebuffer) works well but once I try to start X I just get a blank screen and can't do anything else.
Just made an update (pacman -Suy) and the problem persists.
During boot I get the following oops message.
Any relevant information regarding this is welcome.
Thanks in advance.
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/scsi_level
CPU 1
Modules linked in: uvcvideo videodev v4l1_compat v4l2_compat_ioctl32 cpufreq_userspace cpufreq_powersave cpufreq_conservative cpufreq_ondemand acpi_cpufreq freq_table mperf i915(+) drm_kms_helper drm i2c_algo_bit coretemp eeprom btusb bluetooth rfkill snd_hda_codec_realtek snd_seq_dummy isight_firmware snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_hda_intel firewire_ohci firewire_core crc_itu_t snd_hda_codec i2c_i801 i2c_core appletouch joydev snd_hwdep snd_pcm_oss video output intel_agp intel_gtt applesmc input_polldev processor button sg ac battery iTCO_wdt iTCO_vendor_support pcspkr snd_pcm snd_timer snd_page_alloc mbp_nvidia_bl evdev snd_mixer_oss snd soundcore sky2 lib80211 ext3 jbd mbcache cryptd aes_x86_64 aes_generic xts gf128mul hid_apple usbhid hid dm_crypt dm_mod uhci_hcd ehci_hcd sr_mod usbcore cdrom sd_mod ata_piix ata_generic pata_acpi libata scsi_mod
Pid: 2411, comm: modprobe Not tainted 2.6.37-ARCH #1 Apple Inc. MacBook3,1/Mac-F22788C8
RIP: 0010:[<ffffffffa04c121c>] [<ffffffffa04c121c>] intel_sdvo_ddc_proxy_func+0xc/0x20 [i915]
RSP: 0018:ffff8800942cd878 EFLAGS: 00010246
RAX: ffff88009389b000 RBX: ffff88009389b070 RCX: 0000000000000000
RDX: 0000000000000050 RSI: 0000000000000050 RDI: 0000000000000000
RBP: ffff8800942cd878 R08: 0000000000000000 R09: ffff880093d79000
R10: dead000000100100 R11: 0000000000000000 R12: 0000000000000050
R13: ffffffffa02336a0 R14: ffff880093d79000 R15: 0000000000000050
FS: 00007f104fb96700(0000) GS:ffff88009db00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000010 CR3: 0000000093d5b000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 2411, threadinfo ffff8800942cc000, task ffff88009820be70)
Stack:
ffff8800942cd8d8 ffffffffa00a989a ffff88009389b070 ffff88009389b070
ffffffffa02336a0 ffff880093d79000 ffff8800942cd8d8 ffffffffa00a7906
ffffffffa02336c0 0000000091f177ed ffffffffa02336c0 ffff88009389b070
Call Trace:
[<ffffffffa00a989a>] i2c_default_probe+0x4a/0x140 [i2c_core]
[<ffffffffa00a7906>] ? i2c_check_addr_busy+0x36/0x60 [i2c_core]
[<ffffffffa00a9b30>] i2c_detect+0x1a0/0x320 [i2c_core]
[<ffffffff811a1b2a>] ? sysfs_do_create_link+0xda/0x220
[<ffffffff812ad742>] ? put_device+0x12/0x20
[<ffffffffa00a9d00>] ? __process_new_adapter+0x0/0x40 [i2c_core]
[<ffffffffa00a9d23>] __process_new_adapter+0x23/0x40 [i2c_core]
[<ffffffff812b0604>] bus_for_each_drv+0x64/0x90
[<ffffffffa00a87ad>] i2c_register_adapter+0x16d/0x270 [i2c_core]
[<ffffffffa00a8a59>] i2c_add_adapter+0xa9/0xc0 [i2c_core]
[<ffffffffa04c4fac>] intel_sdvo_init+0xbc/0x860 [i915]
[<ffffffffa046c518>] ? drm_sysfs_connector_add+0x1d8/0x200 [drm]
[<ffffffffa04b8a2e>] intel_modeset_init+0xede/0x12d0 [i915]
[<ffffffffa048d760>] ? i915_switcheroo_can_switch+0x0/0x50 [i915]
[<ffffffffa048fcb8>] i915_driver_load+0x8b8/0x12b0 [i915]
[<ffffffffa046c881>] ? drm_sysfs_device_add+0x81/0xb0 [drm]
[<ffffffffa0469261>] ? drm_get_minor+0x1c1/0x350 [drm]
[<ffffffffa046b6b3>] drm_get_pci_dev+0x183/0x340 [drm]
[<ffffffffa04d2f23>] i915_pci_probe+0x1b/0x1d [i915]
[<ffffffff8121342a>] local_pci_probe+0x5a/0xd0
[<ffffffff81213bc0>] pci_device_probe+0x80/0xb0
[<ffffffff812b173a>] ? driver_sysfs_add+0x7a/0xb0
[<ffffffff812b1a16>] driver_probe_device+0x96/0x1c0
[<ffffffff812b1bdb>] __driver_attach+0x9b/0xa0
[<ffffffff812b1b40>] ? __driver_attach+0x0/0xa0
[<ffffffff812b095e>] bus_for_each_dev+0x5e/0x90
[<ffffffff812b16b9>] driver_attach+0x19/0x20
[<ffffffff812b1248>] bus_add_driver+0x158/0x300
[<ffffffffa02dd000>] ? i915_init+0x0/0x96 [i915]
[<ffffffff812b1e51>] driver_register+0x71/0x140
[<ffffffff813a5fc9>] ? mutex_unlock+0x9/0x10
[<ffffffffa02dd000>] ? i915_init+0x0/0x96 [i915]
[<ffffffff81213e51>] __pci_register_driver+0x51/0xd0
[<ffffffffa046bc90>] drm_pci_init+0xd0/0xe0 [drm]
[<ffffffffa02dd000>] ? i915_init+0x0/0x96 [i915]
[<ffffffffa0463753>] drm_init+0x53/0x70 [drm]
[<ffffffffa02dd094>] i915_init+0x94/0x96 [i915]
[<ffffffff8100212f>] do_one_initcall+0x3f/0x180
[<ffffffff8109415b>] sys_init_module+0xbb/0x200
[<ffffffff8100bed2>] system_call_fastpath+0x16/0x1b
Code: 00 b0 1d 8b 59 48 39 5e 48 7f 0c 8b 59 5c 39 5e 5c 0f 4e c2 0f 1f 00 5b c9 c3 0f 1f 44 00 00 55 48 8b 47 18 48 89 e5 48 8b 78 60 <48> 8b 47 10 ff 50 10 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55
RIP [<ffffffffa04c121c>] intel_sdvo_ddc_proxy_func+0xc/0x20 [i915]
RSP <ffff8800942cd878>
CR2: 0000000000000010
---[ end trace 682ab127e57c8b65 ]---
could be a kernel issue
try to downgrade it
Similar Messages
-
GNOME Fails to start - Polkit? Main.js? - Receive 'Oops' message.
Been using Arch for years but this is my first problem surprisingly so posting it in this Newbies section.
I have MATE, KDE, and FLUXBOX working fine as desktop environments for years. Thought I would give GNOME a try and no matter what I've tried I cannot get it working. All I get is a sad face with an 'OOPS' message on screen. Although I am prompted to enter my WiFi password presumably from NetworkManager. None of the errors listed below turn up much on Google so I thought I'd turn to the community. Any help getting GNOME working correctly would be very much appreciated.
-- Logs begin at Mon 2014-06-09 18:04:18 BST. --
Jan 19 14:26:50 glow lightdm[1574]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Jan 19 14:26:50 glow systemd-logind[432]: New session c4 of user lightdm.
Jan 19 14:26:50 glow org.a11y.Bus[1582]: Activating service name='org.a11y.atspi.Registry'
Jan 19 14:26:50 glow org.a11y.Bus[1582]: Successfully activated service 'org.a11y.atspi.Registry'
Jan 19 14:26:50 glow org.a11y.atspi.Registry[1588]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jan 19 14:26:50 glow systemd-logind[432]: Removed session c1.
Jan 19 14:26:51 glow NetworkManager[422]: <warn> Could not get scan request result: Scan request rejected
Jan 19 14:26:59 glow login[1524]: pam_unix(login:session): session opened for user cellardoor by LOGIN(uid=0)
Jan 19 14:26:59 glow systemd-logind[432]: New session c5 of user cellardoor.
Jan 19 14:26:59 glow login[1524]: LOGIN ON tty3 BY cellardoor
Jan 19 14:27:16 glow org.a11y.Bus[1718]: Activating service name='org.a11y.atspi.Registry'
Jan 19 14:27:16 glow org.a11y.Bus[1718]: Successfully activated service 'org.a11y.atspi.Registry'
Jan 19 14:27:16 glow org.a11y.atspi.Registry[1725]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jan 19 14:27:16 glow gnome-keyring-daemon[1735]: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
Jan 19 14:27:16 glow gnome-session[1714]: ** Message: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
Jan 19 14:27:16 glow gnome-session[1714]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Jan 19 14:27:16 glow gnome-session[1714]: GPG_AGENT_INFO=/run/user/1000/keyring/gpg:0:1
Jan 19 14:27:16 glow gnome-session[1714]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Jan 19 14:27:16 glow rtkit-daemon[833]: Successfully made thread 1753 of process 1753 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jan 19 14:27:16 glow rtkit-daemon[833]: Supervising 2 threads of 2 processes of 1 users.
Jan 19 14:27:16 glow pulseaudio[1753]: Daemon already running.
Jan 19 14:27:16 glow dbus[425]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Jan 19 14:27:16 glow dbus[425]: [system] Successfully activated service 'org.freedesktop.hostname1'
Jan 19 14:27:16 glow dbus[425]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
Jan 19 14:27:16 glow dbus[425]: [system] Successfully activated service 'org.freedesktop.locale1'
Jan 19 14:27:16 glow gnome-session[1714]: (gnome-shell:1773): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
Jan 19 14:27:16 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/endSessionDialog.js:28
Jan 19 14:27:16 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/main.js:15
Jan 19 14:27:16 glow gnome-session[1714]: @<main>:1
Jan 19 14:27:16 glow gnome-session[1714]: ** Message: Execution of main.js threw exception: JS_EvaluateScript() failed
Jan 19 14:27:16 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:16 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:17 glow gnome-session[1714]: (gnome-shell:1790): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
Jan 19 14:27:17 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/endSessionDialog.js:28
Jan 19 14:27:17 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/main.js:15
Jan 19 14:27:17 glow gnome-session[1714]: @<main>:1
Jan 19 14:27:17 glow gnome-session[1714]: ** Message: Execution of main.js threw exception: JS_EvaluateScript() failed
Jan 19 14:27:17 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:17 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Jan 19 14:27:17 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:17 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Jan 19 14:27:17 glow gnome-session[1714]: Unrecoverable failure in required component gnome-shell.desktop
Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: Got "debug" argument.
Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: started.
Jan 19 14:27:17 glow gnome-session[1714]: (uint32 1,)
Jan 19 14:27:17 glow gnome-session[1714]: Entering running state
Jan 19 14:27:17 glow gnome-session[1714]: Failed to play sound: File or data not found
Jan 19 14:27:17 glow gnome-session[1714]: New PolkitAgentListener 0xb637a0
Jan 19 14:27:17 glow gnome-session[1714]: Adding new listener PolkitQt1::Agent::Listener(0x7fff29d587e0) for 0xb637a0
Jan 19 14:27:17 glow org.gnome.zeitgeist.Engine[1718]: ** (zeitgeist-datahub:1857): WARNING **: zeitgeist-datahub.vala:226: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
Jan 19 14:27:17 glow polkitd[433]: Registered Authentication Agent for unix-session:c5 (system bus name :1.90 [/usr/lib/fingerprint-gui/fingerprint-polkit-agent -d], object path /fingerprintgui/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: Listener "/fingerprintgui/PolicyKit1/AuthenticationAgent" registered.
Jan 19 14:27:17 glow NetworkManager[422]: <info> Auto-activating connection 'The Promised LAN'.
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) starting connection 'The Promised LAN'
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0/wireless): access point 'The Promised LAN' has security, but secrets are required.
Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
Jan 19 14:27:17 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
Jan 19 14:27:17 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
Jan 19 14:27:17 glow gnome-session[1714]: Traceback (most recent call last):
Jan 19 14:27:17 glow gnome-session[1714]: File "<frozen importlib._bootstrap>", line 2158, in _find_spec
Jan 19 14:27:17 glow gnome-session[1714]: AttributeError: 'DynamicImporter' object has no attribute 'find_spec'
Jan 19 14:27:17 glow gnome-session[1714]: During handling of the above exception, another exception occurred:
Jan 19 14:27:17 glow gnome-session[1714]: Traceback (most recent call last):
Jan 19 14:27:17 glow gnome-session[1714]: File "/usr/share/system-config-printer/applet.py", line 45, in <module>
Jan 19 14:27:17 glow gnome-session[1714]: from gi.repository import Notify
Jan 19 14:27:17 glow gnome-session[1714]: File "/usr/lib/python3.4/site-packages/gi/importer.py", line 53, in find_module
Jan 19 14:27:17 glow gnome-session[1714]: 'introspection typelib not found' % namespace)
Jan 19 14:27:17 glow gnome-session[1714]: ImportError: cannot import name Notify, introspection typelib not found
Jan 19 14:27:17 glow gnome-session[1714]: (nm-applet:1810): libnm-glib-CRITICAL **: nm_secret_agent_register: assertion 'priv->registered == FALSE' failed
Jan 19 14:27:17 glow gnome-session[1714]: nm-applet-Message: No keyring secrets found for The Promised LAN/802-11-wireless-security; asking user.
Jan 19 14:27:17 glow gnome-session[1714]: (gnome-settings-daemon:1742): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion 'G_IS_DBUS_PROXY (proxy)' failed
Jan 19 14:27:17 glow gnome-session[1714]: (gnome-settings-daemon:1742): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion 'G_IS_DBUS_PROXY (proxy)' failed
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Call to gst_discoverer_discover_uri() failed: GStreamer encountered a general stream error.
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/test.webm' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/test.webm' and mime:'video/webm'
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Failed to open file: No OLE2 signature
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/samsungkeyforserver.pub' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/samsungkeyforserver.pub' and mime:'application/vnd.ms-publisher'
Jan 19 14:27:18 glow org.gnome.OnlineAccounts[1718]: goa-daemon-Message: goa-daemon version 3.14.2 starting
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Couldn't create PopplerDocument from uri:'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf', PDF document is damaged
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf' and mime:'application/pdf'
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Call to gst_discoverer_discover_uri() failed: Your GStreamer installation is missing a plug-in.
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/Documents/Java/Assignment3/evidence%20of%20testing%20and%20results%20not%20as%20expected.xcf' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/Documents/Java/Assignment3/evidence%20of%20testing%20and%20results%20not%20as%20expected.xcf' and mime:'image/x-xcf'
Jan 19 14:27:18 glow gnome-session[1714]: Destroying listener
Jan 19 14:27:18 glow gnome-session[1714]: Removing listener PolkitQt1::Agent::Listener(0x7fff29d587e0)
Jan 19 14:27:18 glow polkitd[433]: Unregistered Authentication Agent for unix-session:c5 (system bus name :1.90, object path /fingerprintgui/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow NetworkManager[422]: <warn> No agents were available for this request.
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 19 14:27:18 glow NetworkManager[422]: <warn> Activation (wlp3s0) failed for connection 'The Promised LAN'
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): deactivating device (reason 'none') [0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Auto-activating connection 'Security'.
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) starting connection 'Security'
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0/wireless): access point 'Security' has security, but secrets are required.
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
Jan 19 14:27:18 glow NetworkManager[422]: <warn> No agents were available for this request.
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 19 14:27:18 glow NetworkManager[422]: <warn> Activation (wlp3s0) failed for connection 'Security'
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): deactivating device (reason 'none') [0]
Jan 19 14:27:18 glow kernel: tracker-miner-f[1827]: segfault at 130000017a ip 00007f14f57cbdbe sp 00007ffff6a89330 error 4 in libgio-2.0.so.0.4200.1[7f14f5779000+16f000]
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.UDisks2VolumeMonitor disconnected from the bus; removing drives/volumes/mounts
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.MTPVolumeMonitor disconnected from the bus; removing drives/volumes/mounts
Jan 19 14:27:18 glow NetworkManager[422]: <warn> Could not get scan request result: Scan request rejected
Jan 19 14:27:18 glow org.a11y.Bus[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: A connection to the bus can't be made
Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.OnlineAccounts[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gtk.Private.UDisks2VolumeMonitor[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gtk.Private.MTPVolumeMonitor[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.evolution.dataserver.Sources3[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.zeitgeist.Engine[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: OK
Jan 19 14:27:18 glow ca.desrt.dconf[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.zeitgeist.Engine[1718]: [14:27:18.337568 WARNING] zeitgeist-daemon.vala:449: The connection is closed
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow gnome-session[1714]: OK
Jan 19 14:27:18 glow org.freedesktop.Telepathy.AccountManager[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.evolution.dataserver.Calendar4[1718]: Could not connect: Connection refused
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: The connection is closed (g-io-error-quark, 18)
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: Error calling StartServiceByName for org.gtk.Private.MTPVolumeMonitor: The connection is closed (g-io-error-quark, 18)
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: Error calling StartServiceByName for org.gtk.vfs.Daemon: The connection is closed (g-io-error-quark, 18)
Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumblerd-WARNING **: Failed to start the thumbnail cache service: Another thumbnail cache service is already running
Jan 19 14:27:18 glow gnome-session[1714]: OK
Jan 19 14:27:18 glow systemd-coredump[1943]: Process 1827 (tracker-miner-f) of user 1000 dumped core.
Thank you!
Moderator edit: Added code tags
Last edited by ewaller (2015-01-19 15:57:10)Please use code tags when posting logs. From
Jan 19 14:27:16 glow gnome-session[1714]: ** Message: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
Jan 19 14:27:16 glow gnome-session[1714]: (gnome-shell:1773): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
it seems you're missing dependencies, or they're not started for some reason. Try running GNOME via GDM, installing latter should pull in the full kitchen sink. If you want more hints, google for "gjs polkit not found".
Last edited by Alad (2015-01-19 15:38:09) -
Started a similar string before. When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage. I know that they are registered. Is there a problem with Contacts possibly. The previous help has been appreciated but the problem persists.
Hi,
Try iMessaging your own iPhone and see if your account is actually logged in.
It can appear "enabled" and On line but sometimes it is not.
Also try sending from your iPhone (number) to your Apple ID and see if it gets to the Mac.
If it does not use the Sign Out button.
Then shut down the Mac
On restart add back the Apple ID to the iMessages account settings.
I also just checked My wife's iPhone as she popped up red.
It turned out her iPhone did not have Messages On.
10:00 pm Tuesday; January 28, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
How do I put all my messages onto my Macbook to view them on there.
I have a lot of messages saved onto my iPhone 5 and I want to view a certain contact's messages (like scroll all the way to the top) but it takes a long time to do so since I have sent/recieved so many messages from them and I have them all saved, so I would like to somehow get all those messages onto my Macbook Pro to make it easier to view them. So if anyone knows how I could do this please help! (and no this is not be asking how to get my iMessage on my macbook) hopefully my question makes sense....
See if this helps.
https://discussions.apple.com/thread/2787937 -
How do i sign out of "messages" on my macbook pro?
SInce i synced my imessages to my computer, i havent been able to recieve the messages on my phone. I just want to remove the messages from my macbook so that i just recieve messages on my iphone. thanks!
1. Open messages on macbook pro
2. Hit command then comma
3. Scroll to the accounts tab
4. Click sign out
This worked for me -
How do I stop getting text messages on my macbook air
How do I stop getting text messages on my MacBook Air?
Hi,
The Mac has an App that is called Messages and one of the accounts in it is the iMessages one that can sync with the iOS one.
Open the Messages app and go to the Preferences (In the drop down Menu in the Apps name in the Menu Bar)
In the Preferences select the Accounts tab.
Select the iMessages account if it is not selected.
Untick the iPhone Number to stop iMessages sent to your iPhone Number appearing on your Mac.
Also go to the General section of the Preferences.
There is an items that reads "When I quit, set the Status to Off Line" select this.
This will stop any incoming Messages (from any source that Messages can join) from launching to app when you have not started it but your Computer is On.
You may also want to go to your iPhone Settings and remove the Apple ID.
9:22 pm Wednesday; July 30, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
How do I stop receiving messages on my macbook pro and receive them on my iPhone 5s?
I have a macbook pro 13 inch with Retina display and intel core i5 and I also have an iPhone 5s. When I receive a new iMessage I only receive it on my macbook and not on my iPhone. I wanted to know how to go back to receiving messages on my iPhone and not on my macbook. The iMessage setting on my phone is off but i carry on receiving messages on my macbook. Can anyone help me please.
If you set your imessage off on your phone it will only turn it off on your phone i think I don't think it effects your mac. I'm not 100% sure on this though.
If you want to remove imessages from your mac - Open iMessage, go to Messages top left, and then select Preferences. Select "Accounts" and then simply "Sign out" That should do it. -
How do i get text messaging through my macbook pro?
how do i get text messaging through my macbook pro?
Welcome to Apple Support Communities
If you have an iPhone, iPad or iPod touch and you use iMessage, you can use it in your Mac if you want. OS X Mountain Lion includes Messages, that allows you to use iMessage.
First, check that your computer is supported > http://www.apple.com/osx/specs If so, open > About this Mac, and see what OS X version you have:
10.5 or older: you have to upgrade first to Snow Leopard > http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
10.6 or 10.7: open > Software Update, and install the most recent version. Then, open the App Store and purchase OS X Mountain Lion.
10.8: you are already using OS X Mountain Lion, so open the Messages app.
While OS X Mountain Lion is being downloaded, make a backup of your files and check that your apps are compatible > http://www.roaringapps.com
If you aren't referring to iMessage, you can't send text messages in your computer -
How do I get messages to my MacBook Pro?
How do i get messages on my macbook pro. It doesnt come up on the app store
I must not have been clear. I didn't originally connect it with a USB. I only did that to check to see if it would print at all. It did. I originally set it up as a wireless printer. And my laptop won't connect to it to print.
-
i was able to use messages on my macbook for a while and now my phone does not connect to my computer so i cannot message or facetime from my computer. both wifi is connected to my phone and computer so why is it not working?
Log out, log back in, and try again.
-
Hi, I recently got the iPhone 6, a bit of mucking around with iMessage, over it to be honest. When i message from my macbook air my recipients receive my message from my email. HELP! it never used to do this. its so annoyingly frustrating.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) -
I was asked on my messages on the macbook air if I wanted to add my phone number. I accepted it but now I want to take it off and only use my email on the macbook. How do I do that?
You should be able to receive iMessages on either email or phone number. If you only want to be reached at your email, you can go to the menu bar and click messages, go to accounts and you will see the 'You can be reached for messages at'. Untick your phone number and you will now receive iMessages only at your email.
-
I cannot connect to FaceTime, encountered "error processing registration, please try later" message on my Macbook Air, but I don't have this problem on my IMac. Can anyone help?
I have the same problem on my iMac. My facetime has been working, but now I'm getting the same error as You. I've been through the following:
The stuff that Linc Davis suggested, new profile on iMac, moved iMac into DMZ zone with no firewall rules, tested with other Apple-ID, checked hosts file, checked different timezone settings, tried to connect to 2 mobile APs (with diferent providors), changed DNS servers (ISP's DNS + Google DNS + Open DNS) - Nothing helped. Also talked to Apple Support, since i have Apple Care, but the seem to be a bit clueless also Well I've mailed them the results of my different tests, so lets see what they come up with - Unfortunately I'm sure it will be the same suggestion as all the major PC manufactures suggests, reinstall and test - RIGHT !!!!!!
If I get solution, I'll post it here.
Kind Regards
Kim -
My redemption code comes up with this oops message and it tells me my code is invalid I don't know how I paid 100$ for it today brand new! I am so frustrated please help anyone with any information that could help
You need to contact Adobe directly using the link below - only they can deal with redemption codes and serial numbers. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your paperwork available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care -
My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.
Maybe you are looking for
-
2G Nano-USB Device Not Recognized message
2G Nano has been sitting for months. Decided to use it as a backup. When connected to computer (tried on 4 different computers running iTunes) I get a "USB Device Not Recognized" message. It shows up in "Device Manager" as an "Unknown USB Device" not
-
How do I delete the Photos App and go back to original
I did not back-up before updating, my bad. Can I simply delete Photos ??. Really think the new Photos app is about ten steps backwards, I tried to EDIT a photo and was sorely disappointed. Any help is appreciated.
-
Hi: I want to use something like "command accountig" in pix 525; I mean I want to know what commands was executed or typed by administrator. Somebody knows if it is possible in PIX? My pix version is 6.3.3. Thank you.
-
Form fill won't fill only certain email address
I am using Yahoo mail. We had to delete on email address from the passwords list due to a password change. Since deleting it, Firefox's form fill will work with all of my email addresses except for the one whose original password was deleted.
-
No tethering option visible despite being allowed by carrier
I have an iPhone 3Gs on the o2 network in Ireland. Recently, o2 enabled tethering on the iPhone with a selection of plans. As someone who purchased an iPhone 3GS when it first came out, I should be able to tether without adding anything on to my bill