OPA web determinations & POST method?

Hi,
we are using OPA web determinations in our Siebel project.
We use this Symbolic URL to communicate with OPA Application:
http://localhost:9083/web-determinations/startsession/da-DK?user=[UserID]&caseID=,[UserID],[ObjectID],DUBU
The SSO Disposition is IFrame and FreePopup command is used for this Symbolic URL, which works good, but we have an issue that the last popup window is shown, when we open the link.
Basically the last pick applet or MVG applet is opened together with the OPA link. This is because "IFrame" disposition is not supported for "FreePopup". That's why we see popup applet opening up along with Symbolic URL popup.
We need to use "Form Redirect" SSO Disposition to resolve the above problem.
But when using "Form Redirect" SSO Disposition with OPA URL we see an error which appears because OPA application could not handle POST method, but only a GET method.
How can I modify OPA to handle POST method?
Thanks

To my knowledge the integration between OPA and Siebel relies on the HTTP GET method, and cannot be modified to use POST.

Similar Messages

Calling https web service POST method from ABAP

Hi all,
I'm having some problems trying to call a credit card https web service from ABAP on 2004s SP11. I'm not using a proxy server and a call from a test https page on my local machine works fine. The page does not require a certificate.
Do I need to do anything in particular to make https work ? I've done calls to http services without any problems. The only difference from a programming perspective as far as I know is the scheme 2 instead of 1, and the server protocol changed to HTTPS.
All is fine until I call method http_client->receive, at that point I get a return code of 1, http_communication_failure.
Your suggestions & contributions will be greatly appreciated.
Cheers,
Wouter.
report zcreditcardtest .
data: wf_user type string .
data: wf_password type string .
data: rlength type i,
      txlen type string .
data: http_client type ref to if_http_client .
data: wf_string type string .
data: wf_string1 type string .
data: wf_proxy type string ,
      wf_port type string .
selection-screen: begin of block a with frame .
parameters: crcard(16) type c lower case default '4242424242424242',
            cvn(4)     type c lower case default '564',
            year(2)    type c lower case default '07',
            month(2)   type c lower case default '11',
            amount(10) type c lower case default '100.00',
            cukey(4)   type c lower case default 'AUD',
            order(10) type c lower case default 'AB1322-refund'.
selection-screen skip 1.
parameters: user(50) lower case,
            password(50) lower case ,
            p_proxy(100) lower case default '' ,
            p_port(4) default ''.
selection-screen: end of block a .
at selection-screen output.
loop at screen.
    if screen-name = 'PASSWORD'.
      screen-invisible = '1'.
      modify screen.
    endif.
endloop.
start-of-selection .
clear wf_string .
concatenate
'order.type=capture&customer.username=SOMEUSER'
'&customer.password=SOMEPASSWORD'
'&customer.merchant=SOMEMERCHANT'
'&card.PAN=' crcard
'&card.CVN=' cvn
'&card.expiryYear=' year
'&card.expiryMonth=' month
'&order.amount=' amount
'&customer.orderNumber=' order
'&card.currency=' cukey
'&order.ECI=IVR'
'&customer.captureOrderNumber=' order
'&order.priority=1'
'&message.end=null'
into wf_string .
break-point.
clear :rlength , txlen .
rlength = strlen( wf_string ) .
move: rlength to txlen .
clear: wf_proxy, wf_port .
move: p_proxy to wf_proxy ,
        p_port to wf_port .
call method cl_http_client=>create
    exporting
      host          = 'api.somewhere.com'
      service       = '80'
      scheme        = '2'                        "https
      proxy_host    = wf_proxy
      proxy_service = wf_port
    importing
      client        = http_client.
http_client->propertytype_logon_popup = http_client->co_disabled.
wf_user = user .
wf_password = password .
* proxy server authentication
call method http_client->authenticate
    exporting
      proxy_authentication = 'X'
      username             = wf_user
      password             = wf_password.
call method http_client->request->set_header_field
    exporting
      name = '~request_method'
      value = 'POST'.
call method http_client->request->set_header_field
    exporting
      name = '~server_protocol'
      value = 'HTTPS/1.0'.
call method http_client->request->set_header_field
    exporting
      name = '~request_uri'
      value = '/post/CreditCardAPIReceiver'.
call method http_client->request->set_header_field
    exporting
      name = 'Content-Type'
      value = 'application/x-www-form-urlencoded; charset=UTF-8'.
call method http_client->request->set_header_field
    exporting
      name = 'Content-Length'
      value = txlen.
call method http_client->request->set_header_field
    exporting
      name = 'HOST'
      value = 'api.somewhere.com:80'.
call method http_client->request->set_cdata
    exporting
      data   = wf_string
      offset = 0
      length = rlength.
call method http_client->send
    exceptions
      http_communication_failure = 1
      http_invalid_state         = 2.
call method http_client->receive
    exceptions
      http_communication_failure = 1
      http_invalid_state         = 2
      http_processing_failed     = 3.
if sy-subrc <> 0.
    message e000(oo) with 'Processing failed !'.
endif.
clear wf_string1 .
wf_string1 = http_client->response->get_cdata( ).
* Further Processing of returned values would go here.

Well, finally got this running !
First of all I needed to download SAP Cryptographic Software and install it on the Web Application Server. Added some parameters to the profile, then set up some nodes in strust. Note 510007 describes the full process.
I then installed the certifcate I needed by opening the website in internet explorer and exporting it to a CER file and then importing it into the SSL client (Anonymous). The blog from Thomas Yung, "BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP" describes the process of exporting and importing certificates.
I then had to start the HTTPS service on my NW 2004s ABAP preview edition SP11. I set this up for port 443.
/osmicm --> GOTO --> SERVICES --> SERVICE --> CREATE
Then finally, the program needed a few changes :
call method cl_http_client=>create
    exporting
      host          = 'api.somewhere.com'
      service       = '443'                       " <<----- 443 NOT 80
      scheme        = '2'                        "https
      ssl_id        = 'ANONYM'              " <<----- SSL_ID Added
      proxy_host    = wf_proxy
      proxy_service = wf_port
    importing
      client        = http_client.
and further in the program (thanks Andrew !) :
call method http_client->request->set_header_field
    exporting
*   name = '~server_protocol'             " <<<--- DELETE
      name = '~request_protocol'         " <<<-- INSERT must be request
      value = 'HTTPS/1.0'.
and presto, we can now consume a https webservice via a POST method from within an ABAP program ! Nice.... Can I give myself 10 points ?

How to send Parameters FORM to PHP WEB Page with method POST (secure)?

Hello everyone,
i hope someone can help me to find a solution to this problem!
i have to send "+precious+" parameters from an oracle form to php page, like username and password, with a secure method... i tried with WEB.SHOW_DOCUMENT procedure but it uses GET Method and when the web page open up you can read those parameters in the url...no good!
some suggestion?
Thank a lot in advance... FMicio

The other way you have is to make a PJC java bean ...
which uses HTTPClient library..
for example:
PostMethod post = new PostMethod("http://jakarata.apache.org/");
        NameValuePair[] data = {
          new NameValuePair("user", "joe"),
          new NameValuePair("password", "bloggs")
        post.setRequestBody(data);
        // execute method and handle any error responses.
        InputStream in = post.getResponseBodyAsStream();
        // handle response.I have done a multipart form data post to upload files to my db over httpClient.. and other things...
Or with java.net.* api-s
try {
    // Construct data
    String data = URLEncoder.encode("key1", "UTF-8") + "=" + URLEncoder.encode("value1", "UTF-8");
    data += "&" + URLEncoder.encode("key2", "UTF-8") + "=" + URLEncoder.encode("value2", "UTF-8");
    // Send data
    URL url = new URL("http://hostname:80/cgi");
    URLConnection conn = url.openConnection();
    conn.setDoOutput(true);
    OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
    wr.write(data);
    wr.flush();
    // Get the response
    BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream()));
    String line;
    while ((line = rd.readLine()) != null) {
        // Process line...
    wr.close();
    rd.close();
} catch (Exception e) {
}Or you can call your web page (post data) from your database
http://awads.net/wp/2005/11/30/http-post-from-inside-oracle/
Edited by: Peterv6i on Mar 30, 2012 3:49 PM
Edited by: Peterv6i on Mar 30, 2012 3:55 PM

Passing Parameters via Post Method from Webdynpro Java to a web application

Hello Experts,
I want to pass few parameters from a web dynpro application to an external web application.
In order to achieve this, I am referring to the below thread:
HTTP Post
As mentioned in the thread, I am trying to create an additional Suspend Plug parameter (besides 'Url' of type String) with name 'postParams' and of type Map.
But when I build my DC, I am getting the same error which most of the people in the thread have mentioned:
Controller XXXCompInterfaceView [Suspend]: Outbound plug (of type 'Suspend') 'Suspend' may have at most two parameters: 'Url' of type 'string' and 'postParams' of type 'Map'.
I am using SAP NetWeaver Developer Studio Version: 7.01.00
Kindly suggest if this is the NWDS version issue or is it something else that I am missing out.
Also, if it is the NWDS version issue please let me know the NWDS version that I can use to avoid this error.
Any other suggestion/alternative approach to pass the parameters via POST method from webdynpro java to an external web application apart from the one which is mentioned in the above thread is most welcome.
Thanks & Regards,
Anurag

Hi,
This is purely a java approach, even you can try this for your requirement.
There are two types of http calls synchronous call or Asynchronous call. So you have to choose the way to pass parameters in post method based on the http call.
if it is synchronous means, collect all the values from users/parameters using UI element eg: form and pass all the values via form to the next page is nothing but your web application url.
If it is Asynchronous means, write a http client in java and integrate the same with your custom code and you can find an option for sending parameters in post method.
here you go and find the way to implement Asynchronous scenario,
http://www.theserverside.com/news/1365153/HttpClient-and-FileUpload
http://download.oracle.com/javase/tutorial/networking/urls/readingWriting.html
http://digiassn.blogspot.com/2008/10/java-simple-httpurlconnection-example.html
Thanks & Regards
Rajesh A

A page with a post method form is not opening in PageViewer web part

Hi,
I wanted to display a page in the Page Viewer web part. So, i gave the URL of the page in the Page Viewer web part.
The page is rendered as expected.
Now, the page has a link when clicked opens another page which has a form with a post method. The issue is the page with the form is not opening. I want the page to open and function as expected.
Any suggestions?

Hello Raghavendra_RT,
Is that page on SharePoint, or is that on the internet?
If the second is the case I would just use a hyperlink which opens in a new tab via target blank attribute:
http://www.w3schools.com/tags/att_a_target.asp
And you can place it in a content editor web part.
Btw, with SharePoint 2013 you can use the Script Editor Web Part to embed a form from a source like Survey Monkey:
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2013/05/20/how-to-use-script-editor-web-part-in-sharepoint-2013.aspx
- Dennis | Netherlands | Blog |
Twitter

Need JDeveloper Web Service with HTTP POST method

Hello all,
I am creating a Web Service from a java class using JDeveloper. The wsdl created uses a SOAP binding. When I test the web service, either through JDeveloper or by deploying to OAS, the HTTP request created uses the HTTP GET protocol. I am assuming that this would be the same for anybody doing this.
I need to know how to change it to be an HTTP POST protocol instead.
The reason that I need to try and use the POST method is that the xml needed by the service holds a lot of data and the http server is giving me a "URI too long" error. I have read and been told that using POST instead of GET would help this, but I can't figure out what to change to make this happen. I am not sure if I have to make a change in the generated wsdl or somewhere else. Or if it just won't work that way.
Any help you can provide would be appreciated.
Thanks,
rob

Hi Ayush,
Please refer -
http://biemond.blogspot.com/2010/08/http-basic-authentication-with-soa.html
Regards,
Anuj

Error installing web-determinations 10.1.0.27 on WLS 10.3.3

I have ammended the application.properties with the following
load.rulebase.from.classpath =true
rulebase.path =rulebasesThe web-determinations seems to deploy without error but when I start the application I get the following error
Message icon - Error [HTTP:101216]Servlet: "WebDeterminationsServlet" failed to preload on startup in Web application: "web-determinations.war". com.oracle.determinations.web.platform.exceptions.WebDeterminationsException: Could not initialise Velocity Templating Engine at com.oracle.determinations.web.platform.templatingengine.VelocityTemplatingEngine.<init>(VelocityTemplatingEngine.java:97) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.init(WebDeterminationsServletContext.java:176) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.<init>(WebDeterminationsServletContext.java:104) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.init(WebDeterminationsServlet.java:51) at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539) at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976) at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950) at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869) at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126) at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512) at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200) at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27) at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409) at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43) at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161) at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844) at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253) at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: java.lang.ClassNotFoundException: org.apache.velocity.runtime.log.Log4JLogChute at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:169) at org.apache.velocity.runtime.log.LogManager.createLogSystem(LogManager.java:123) at org.apache.velocity.runtime.RuntimeInstance.initializeLogger(RuntimeInstance.java:553) at org.apache.velocity.runtime.RuntimeInstance.init(RuntimeInstance.java:226) at org.apache.velocity.runtime.RuntimeInstance.init(RuntimeInstance.java:461) at org.apache.velocity.app.VelocityEngine.init(VelocityEngine.java:106) at com.oracle.determinations.web.platform.templatingengine.VelocityTemplatingEngine.<init>(VelocityTemplatingEngine.java:95) ... 45 more
has anyone installed this configuration, have I missed something?
cheers
James

JDT wrote:
Now if you want to add rules what you can do to make life easier is to install a directory in the classpath, e.g. set the classpath to /u01/oracle/opa. To do this edit the commEnv.sh (linux) and add the directory to the classpath.
On the OS create a new directory rulesbase and add your rules in there.
To see the rules you need stop and start the web-determination app in the weblogic console.
cheers
JamesI create a "rulebase" directory. This is the directory we set in the class path? Sorry for the stupid question.
Thanks.
-muktech
Edited by: muktech on May 25, 2010 2:30 PM
Edited by: muktech on May 25, 2010 2:31 PM

Error while deploying web-determinations in 10gR3 & weblogic 11g

Hi,
I am installing OPA 10.0.1 for configuring Siebel connector, for this on Linux I am deploying web-determinations & determination-server on 10gR3.
I was able to successfully deploy determination-server and I am facing error while deploying web-determinations
I am facing below error when accessing web-determinations URL after deploying in 10gR3 ( 10.1.3.3 ).
===================
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details
===================
No error is being logged in while application logs.
I also tried deploying in weblogic 11g (10.3.1) and I have below error ,
===================
[HTTP:101216]Servlet: "WebDeterminationsServlet" failed to preload on startup in Web application: "web-determinations.war". com.oracle.determinations.interview.engine.exceptions.EngineConfigurationException: No rulebase directory specified at com.oracle.determinations.interview.engine.local.FileRulebaseService.<init>(FileRulebaseService.java:49) at com.oracle.determinations.interview.engine.local.LocalInterviewEngine.initialise(LocalInterviewEngine.java:91) at com.oracle.determinations.interview.engine.local.LocalInterviewEngine.<init>(LocalInterviewEngine.java:34) at com.oracle.determinations.interview.engine.InterviewEngineFactory.createInstance(InterviewEngineFactory.java:19) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.init(WebDeterminationsServletContext.java:163) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.<init>(WebDeterminationsServletContext.java:91) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.init(WebDeterminationsServlet.java:51) at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:521) at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1913) at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1887) at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1805) at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3041) at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1374) at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:452) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60) at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200) at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60) at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27) at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:629) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:206) at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:40) at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161) at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:140) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:106) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844) at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253) at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
=====================
Pls let us know any configuration needs to be done.
Pls advise.

Hey Suni,
It appears that there is a section missing out of the current installation guide for Web Determinations. The reason you're getting that error is because you are deploying to application to WebLogic which doesn't expand the war by default so you need to configure the rulebase loader. Before you add proceed with the steps in the install guide you need to:
# Unpack the web-determinations.war file
# Copy the rulebases you wish to install to <webroot>/WEB-INF/classes/rulebases
# Edit the following setting in the application.properties file (<webroot>/WEB-INF/classes/configuration):
load.rulebase.from.classpath =true
rulebase.path =rulebases# Repack the war file
# Proceed with the installation steps as set out in the installation guide
I'll have the installation guide fixed and updated as soon as possible.
Thanks,
Kristy

HTTP POST method does not pass parameters to the server

Hi ,
I am using SSO using VSJ product and implemented using a filter.
I have problems as below
1. Every request to the web server will be intercepted by this vsj filter and if sso does not succeed it will send 403
2. my system will detect 403 in web.xml and redirect to login page
3. user key in username and password and log in
4. after successful login set the HttpSession and redirect to homepage
Problem is subsquent form submit / ajax call using "POST" method cannot pass any parameters to the servers ( parameters sent using POST will be null in the servers ) ? GET is okay
If i comment out the vsj filter altogether , everything works as per normal.
My Question is
1. Is there anyway to overcome come ?
2. Is there any method to clear off whatever this sso vsj has set ( clear cookies / start new browser instance / etc ) in order to forget the state
Any idea?
Thanks

Yes.
here to illustrate
public MyFilter extends VSJAuthFilter
*public void doFilter(){*
*if(session.getAttribute("loginSucces") != true){*
super.doFilter(); //call VSJ Auth filter to perform SSO in order to get User Principal populated.
*}else{*
chain.doFilter(); // normal filter
My Filter only intercepts *.jsp and *.do
Basically here is the pattern that i observe
1. If i hit default url (homepage.do) for the first time it will trigger the super.doFilter() , it will then throw 403 and redirect to login.html , after success and go to homepage , subsequent POST parameter is missing
2. if i hit the external login page directly just to simulate ( eg : login.html ) it wont trigger this filter , after success and go to homepage , subsequenet POST parameter is okay
3. GET is always ok
I am using weblogic server 10.x btw
Thanks

How to display html document returned by utl_http package (POST method)

I am using oracle forms 10g, data base version is 10g.
I have written a database procedure that calls utl_http package POST method and request returns an html document. How do display this html document from oracle form?
Thank you
Hema

Here you have...
A Full Web Browser Java Bean - Oracle Forms PJCs/Java Beans
http://forms.pjc.bean.over-blog.com/article-26251949.html

JAX-WS -- Force a wsimport generated ws client to use http POST method

I've used wsimport to generate a JAX-WS client for a wsdl and xsd bindings that were provided to me.
The basic implementation goes something like this.
URL serviceUrl = ...url to the live web service's wsdl (this will change often and needs to be data driven)
QName qname = new QName("thenamespace", "MyService")
MyService myService = new MyService(serviceUrl, qname);
At this point a http GET request is sent to the server which promptly spits back a "405: method not allowed" because it is only configured to accept the http POST method.
Unfortunately i cannot change this behavior and need a way to get the web service client to generate http POST requests.
Setting the following seemed to have no effect.
System.setProperty("javax.xml.ws.http.request.method", "POST");
Thanks!

so, keep the wsdl as a local resource and use a url for the local resource. then the service will not request the remote wsdl.

Connecting Web Determinations 10.1.0.27 to a DMS

We are planning to connect Oracle Web Determinations to a document management system. This document management system uses a web service to connect with other systems. Our application already generates a PDF, and we want to save this PDF in a specific folder and then call the webservice to add the document to the Document Management System.
What would be the best way to implement this?

There is a particular adapter that is responsible for outputing the results of an Interview from Web Determinations. This is the Data Adapter (see "Data Adaptor Plugin Overview" in the "Oracle Policy Automation Developer Help"). A Data Adapter is exercised when a user clicks on the Save button in Web Determinations.
Out of the box the default data adapter just saves the data to an XML file locally.
Essentially you need to implement a custom Data Adapter that will save the interview in a format that your DMS can interpret.
For example the OPA Connector for Siebel has a Data Adapter which sends the results of an Interview to Siebel via a web service.

Adf mobile : calling rest post method

Hi all,
I am calling a rest post using rest adaptor but i am getting the following error:
Unable to find operation : unknown
Please tell me where should i specify the operation name while calling rest post method.
Regards,
Deepak

I would suggest you use the HTTP Analyzer to see what is sent to your service specifically and identify the missing part.
One common pattern that we see with complex web services, is to create a server side proxy that calls the complex service and exposes a simpler interface that is consumed by the mobile application.
This will also reduce the network traffic to your mobile application (and will likely reduce the application's size)

Reverse proxy plugin does not like the POST method

My second tier is not functionning properly when placed behind a S1WS6 with reverse proxy
Client ====== SunOne web server with Passthrough ====== .NET app server & web services.
The web server configuration (reverse proxy � libpassthrough.so) is configured and is working correctly when it comes to requesting normal pages, however a problem arises when the request is made either by:
1- Invoking a web service on the .Net tier, or
2- The .Net tier performs a server.transfer call within the same .net server (Page transfer)
Keep in mind that the .Net tier works fine when not accessed through the reverse proxy.
It seems that when a POST method is invoked, a Session Close is sent before data is sent back !!
We tried to isolate the problem from different angles but came up short, the http server log shows that the request was made
192.168.2.7 - - [14/Jul/2004:14:10:56 +0300] "POST /wavedms2.0/TestWebService/TestService.asmx HTTP/1.1" 100 0
Although response 100 indicates that it is waiting for more, while the web service error shows the following:
The underlying connection was closed: An unexpected error occurred on a receive.
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at TestWebService.oWebService.MyWebSvc.HelloWorld()
at TestWebService.Form1.button1_Click(Object sender, EventArgs e)
In general, any page that uses POST method faces the same problem.I appreciate any help you can provide us with a solution on this issue.

The Application Server plugin, libpassthrough.so, was designed to connect Web Server to Application Server. Unfortunately, it does not work with IIS which sends unsolicited "HTTP/1.1 100 Continue" responses.

Build and run Rules with Jdev Integrated Web Determination Server

Hi
I created the rule using Oracle Policy Modeling (OPM). Then built and deployed with Embedded Tomcat web determination server. Successfully done it.
Now I have to run the same rule under Jdeveloper Integrated Server. As I know, current version of OPM doesn't support any external server other than Tomcat. In that case I have to copy the output from OPM to JDev Integrated server manually.
Let me know the server location where I have to copy the rule from OPM to Jdev Server.
Thanks
Dev

There are a couple of ways of deploying a new rulebase into OPA running on weblogic.
These can be found in the documentation in the Oracle Policy Automation Developer's Guide (http://docs.oracle.com/html/E38272_01/toc.htm)
1. The first way is to redploy the OPA runtime .war (web-determinations or determinations-server) when a new rulebase is built. These war files are created in the releases directory of the OPM project. When a new release is built the rulebase is embedded in the .war file
2. The second way is to re-deploy the rulebase only. The rulebase is called <project name>.zip and is found in the output directory of the OPM project.
To use the second approach in weblogic you must configure the OPA runtimes to use an external directory. See the Manage rulebases and application.properties sections of the Oracle Policy Automation Developer's Guide.
Then decide if you want to 'hot-swap' (deploy immediately after copying a new rulebase to this directory. If you do not use hot swapping, you will have to restart the web application when you deploy a new version.
Cheers
Frank
Edited by: frank.hampshire on Dec 13, 2012 11:35 AM

OPA web determinations & POST method?

Similar Messages

Maybe you are looking for