Open Adobe form through workitem in UWL

Hi,
We have a requirement in which a workitem is gettng generated from workflows, And it comes in UWL, So when we execute that workitem it should open a adobe form for notificaton so that approver can reject or approve that notificaton, But it is openng a SAP transaction rather then adobe form.
we are on ECC 5.0 and portal verion is 7. we are standard workflow WS5000041 which generates the workitem.
Thanks.

Hi Saurabh 
Please check following things:
1) xml configuration file has entry for your workitem.
2) if not please configure workitem.
3) Re-register your system.
4) Also check for Adobe run time environment.
Hope this will help you.
Warm Regards
Abhijeet

Similar Messages

  • Open PDF Adobe form from workitem in UWL

    Hi,
    We have a requirement in which a workitem is gettng generated from workflows, And it comes in UWL, So when we execute that workitem it should open a adobe form for notificaton so that approver can reject or approve that notificaton in PDF, But it is openng a SAP transaction rather then adobe form.
    we are on ECC 5.0 and portal verion is 7. we are using standard workflow WS5000041 which generates the workitem. It works perfectly fine in ECC 6.0, As there are different standard workflows in ECC 6.0 but the working is same.
    Thanks.

    HI
    I think you might have missed out to configure the respective task ID and its respective visualization parameters in the SWFVISU transaction.
    Iam not sure what is exactly the flow in the ECC5.0 but if you look at the workflow template , it again incudes a subworkflow, in which you actually have the approve form standard task the task number is TS50000075 and in the swfvisu txn the task is already configured with visualization paramters as Webdynpro aplication and Name sape sa SAP, I think you have to add one more parameter in the DYNPARAM
    Regards
    Pavan

  • Displaying Adobe Form through CRM WEB UI

    Hi Experts,
    Currently I am working on CRM Technical which is very new to me. I've got a requirement to display the Adobe form through CRM WEB UI. The requirement is like this.
    In a screen of WEB UI there is a option of OUTPUT preview. When i select the specific billing document and when i click on OUTPUT Preview tab it should display the Adobe Form which was developed in SAP GUI using txn SFP. I have done some R&D on it and i found that an ACTION Profile need to be created for this kind of requirements. But in my research i found only Smartforms can be displayed using the ACTION point.. Could anyone help me out how to display the Adobe Form using the Action......
    Regards,
    Aarthi.
    Moderator message: please have a look in the dedicated forum for "Adobe Interactive Forms".
    Edited by: Thomas Zloch on Jan 11, 2011 1:51 PM

    Hi Robert,
    I came across this post after implementing the same solution.  It works fine for me in SAPgui, i.e. it creates an entry in the spool which I can priview or print, but when I use the webUI it just opens a new window with a white background and the message 'Error in smartform'.
    Nitin, did you manage to come up with any solution?  Or did this work for you?
    Regards,
    Simon

  • Add Button to Display Adobe Form through SPRO

    Hello All,
    I am trying to add a button to display Online Interactive Adobe Form through SPRO but its not working.
    So please suggest me how can i add a button for it ASAP.
    Thanks and Regards:
    Anugrah

    method ONACTIONCLICK .
      wd_this->fire_o1_plg(
    endmethod.

  • How to open multiple forms through differnt responsiblity

    I have a 11.5.10.2 system on Linux red hat.
    Business pepole want to open multiple forms through different responsiblities from multiple web brower sessions.
    However when I opened 2 IE brower sessions, log into responsiblity and open one oracle form in one IE session and log into another responsiblity through second IE session. The first opened form disappear and replaced by the second oracle form opened from another IE session. That means only one Oracle form can be open at the same time for this case.
    The current walkaround solution is to open 2 browser sessions using 2 different browsers ( one is IE another is Firefox) to fix this issue. Apparently this is not a good solution.
    Can you please give me some suggestion to fix this issue?

    Thank you very much for the information.
    The note mention:
    The new forms launcher does not support opening multiple forms applets for the same database across different responsibilities. Opening a form in another responsibility will cause any forms currently open to close. This behaviour is standard.
    However it is possible to enable users to open multiple forms sessions for the same database for the same responsibility when using MS Internet Explorer as the client browser. This is made possible with Patch 3293241. This patch is included in Oracle Applications release 11.5.10 as standard.
    My current system is 11.5.10.2. I verified that patch 3293241 has been applied. I have no problem to open mutiple forms with in SINGLE web brower session, within same responsibility. I am aware that you can not open multiple forms through SINGLE web brower session through multiple responsiblity. What I tried to do is to open mutiple forms through multiple web browers sessions. Open one brower session, log into system and open a form, then open another web brower session, log into the sytem and open a form through different responsiblity. The system does not allow me to open multiple forms through multiple web brower sessions. Only the latest form can be displayed. Is this standard design for 11.5.10?
    Can Form Servlet architecture solve this limitation?
    Actually afterI changed some form funcation paramter in Oracle Application Developer responsiblity, I can open 2 form session from 2 different responsiblities through 2 web brower sessions. I can open one form session as Application Developer and another form session through another responsiblity. Then I can switch to other responsiblity through Application Developer responsiblity to open forms.
    Is there any other way I can open multiple form sessions to the same database through multiple web brower sessions?
    Thanks a lot for your help
    Edited by: wcxtao on Nov 3, 2008 9:47 AM
    Edited by: wcxtao on Nov 3, 2008 9:57 AM
    Edited by: wcxtao on Nov 3, 2008 10:08 AM

  • Add a button to display Adobe Form through SPRO on T-code IQS22

    Hello All,
    I am trying to add a button to display Online Interactive Adobe Form through SPRO on T-code IQS22 but its not working.
    So please suggest me how can i add a button for it ASAP.
    Thanks and Regards:
    Anugrah

    I asked my question in hopes that somebody has maybe had a similar question or has dealtwith something similar to what I am trying to do
    But you said you already know how to do this. You said you know how to create a JFrame and display it. So what is your problem?
    You said you know where to add the code. So again what is your problem?
    All you posted is code that was generated by the IDE. You have not make any effort to add your own code. Why do you think the code to show a frame here, is any different than the code you used to show a frame in the past?
    You learn by trying, not by asking people to spoon feed the answer to you.
    If you would even make the slightest effort at filling in the code where the IDE has told you to add the code I would be more willing to help. But apparently you have no desire to make the effort.

  • Sending Adobe forms through Email and Fax

    Hi ,
    I have created an Adobe Form i.e. PO Form,
    whose print/driver  program is customised / based on SAPFM06P and routine used is ADOBE_ENTRY_NEU.
    So , now I use the transaction ME22N and use the External Send option i.e sending Email , but the Email is getting sent to Spool instead of SOST.
    So what changes do I need to make .
    Can anyone tell me how do we send an Adobe Form through email * in which routine is based on Adobe_entry_neu .
    Thanks  in advance,
    Rohit

    Hi,
    Thanks for reply
    The link u mentioned utilises Objects.. but can we send internet mail using this?
    As we cannot change RECIPIENT TYPE in this case in the object.
    I used this format in the program but the attachment is going to EXpress inbox. and goes to my SAP Inbox instead of Email .
    So what changes we need to do for this.
    Alternatively,  can we use FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' for this purpose?
    Edited by: Rohit Pareek on Feb 3, 2009 3:36 PM

  • Opening ADOBE forms is very slow.

    Lately, once I enter my username and password, opening ADOBE forms is very slow.

    Hi,
    try on the icon of SAP on desktop go to properties and on the compatibility check disable desktop composition.
    hope it helps
    Petr

  • Problem in opening adobe form

    Dear Experts,
    I have developed an interactive form using the NWDS version 7.0.13 I have given the display type property of the form as "Native".  When I open this form on some machine it's opening properly only if the adobe version installed is 7.0 or above but if the version is less than that I am unable to see it initially. Only after going to the Adobe>Edit>Preferences>Internet>Display PDF in browser and checking the option I am able to view it. My requirement is to be able to see this adobe interactive form irrespective of the version of adobe installed on the machine.  Is there any option to enable this setting through code or any other option so that I may be able to view the adobe interactive form on any machine with any version of Adobe reader installed? I am using Designer 6.0.
    Please suggest your opinions regarding this issue.
    Quick and helpful responses will be highly appreciated.
    Warm Regards,
    Gaurav

    Hey Gaurav,
    You should upgrade the version of Adobe Reader to 8.1.1 minimum.  Also with your designer, you probably want to upgrade to 7.1.  Take a look at these notes:
    [Note 947675 - ISR/Adobe: Layout category ZCI (composite SAP note)|https://service.sap.com/sap/support/notes/947675]
    [Note 962763 - Adobe LiveCycle Designer 7.1 Installation|https://service.sap.com/sap/support/notes/962763]
    [Note 1121176 - Adobe LiveCycle Designer 8.0 - Installation|https://service.sap.com/sap/support/notes/1121176]
    [Note 965548 - Adobe LiveCycle Designer 7.1 Patch|https://service.sap.com/sap/support/notes/965548]
    [Note 1176858 - Adobe LiveCycle Designer 8.1 - Installation|https://service.sap.com/sap/support/notes/1176858]
    [Note 834573 - SAP Interactive Forms by Adobe: Acrobat/Reader version|https://service.sap.com/sap/support/notes/834573]
    There may be some other notes listed at the bottom of these notes that might help as well.
    Hope this helps...
    Cheers,
    Kevin

  • Unable access to Access Adobe Forms through Citrix

    Hi All,
    We are able to login through VPN to our Client network, We are able access SAP through Citrix, When we try to access or test Webdynpro appliactions and Adobe forms.. we are not able access, Please suggest what could be the problem.
    Recently we found that, even are not able to access SAP Portal after logging to the client domain, and we understand that, there is http port and 500000 port needs to be opened to access these appliactions. But the people who are in the intranet( Client domain) are able to access all these applications.
    Please suggest, is there any settings needs to be done at Citrix level or firewall level.etc...
    Note: When we try to access Adobe form we are getting some version id...etc... through citrix, but people are able to access directly in their domain.
    Help appreciated.  Thanks
    PRadeep

    Hi Pradeep,
    I think that you may not get the performance running adobe forms while using citrix. For using portal applications you need to open the port to access the client portal through VPN.
    Regards,
    Arafat

  • Error while opening Adobe Form Builder

    Hi all,
    I am trying to open an existing form in Adobe Form builder (TA SFP).
    When ever I display a standard form say FP_TEST_01 and go to the layout tab, I get an error saying <i><b>Error occurred in communication with layout editor</b></i>. I am using ECC 5.0 system.
    Am I missing any configurations?
    We have all the required configurations set as mentioned in Configuration guide. (Required for ABAP stack).
    Please help me out.
    Thanks in advance.
    Regards,
    Ravikiran.

    Or go to http://service.sap.com/download > Download > SPs and Patches > Search for SPs and Patches > Enter 'Designer'. Install Designer 7.0 <b>and the 7.0 patch</b> (!).
    Kind regards,
    Markus Meisl
    SAP NetWeaver Product Management

  • SOFFICEINTEGRATION143 Error in ISR when trying opening adobe form layout

    Hi,
    I'm running into SOFFICEINTEGRATION143 error when trying to open any adobe form layout in the ISR secenario definition. Can anyone let me know why I'm getting this error and what the solution is?
    FYI, I'm using SAP gui version 640 Final Release, File Version 6404.4.14.2987, build 781208, Patch level 14
    I do have Adobe LifeCycle Designer 7.1, Reader 8 and MSOffice 2002.
    Thanks in advance.
    Giri.

    Hi, Giri. Did you solve your problem?
    I think I m having similar problem. I installed Sap Gui 7.1, SAP interactive form and Adobe LiveCycle Designer ES.
    I was able to open abode form layout in the transaction SFP. However, after I upgraded my Adobe to 7.0.9. (previous version is 7.x.x). I get the error SOFFICEINTEGRATION143 when try open again.
    I uninstalled Adobe 7.0.9 and installed Adobe 8.1 but it still get the same error.
    Can anyone help?
    Thanks in advance.

  • Browser page still open ,adobe form is closed

    Hello ,
    We are facing browser issue in Adobe Interactive forms.We are opening the form from a thirdparty portal and whenever we click on submit button the adobeform is closed but the browser is not getting closed.
    Can someone suggest me where should i write the code to close te browser.Is it in Webdynpro,or thirdparty portal or in javascript.
    We tried bothe the layouts i.e ZCI and ACFx.We are uisng Adobe 8.1 version.The Adobe is processed by Webdynpro for ABAP.
    Please help me.
    Regards,
    Sridar

    You can use an Exit Plug in Web Dynpro ABAP to close the browser window, but there is no tell what will happen if you call this functionality in another portal.  The other portal could be running the WDA inside some frame and JavaScript access to the top frame might not be possible.

  • Adobe form Through Email

    Hello Gurus,
    My requirement is to send the Adobe form via Email as attachment.
    Am using FM "FP_JOB_OPEN", Generated Adobe Form FM and FP_JOB_CLOSE.
    Here, am getting PDF format in "FPFORMOUTPUT-PDF".
    As "FPFORMOUTPUT-PDF"  is in format of xstring, We need to convert it to Binary and for this am using FM "SCMS_XSTRING_TO_BINARY". 
    Code:
    data: li_att_content_hex type standard table of x.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        BUFFER     = FPFORMOUTPUT-pdf
      TABLES
        BINARY_TAB = li_att_content_hex.
    Later, am using the FM "SO_NEW_DOCUMENT_ATT_SEND_API1" to send a mail.
    As a result am getting the mail with attachment as PDF but when I try to open the attachment it gives me an error as "It wasn't correctly decoded".
    Please, Let me know about this issue.
    Thanks in advance.
    Regards,
    Usha

    hi,
    Refer to this link..
    Re: Attachment in ADOBE form

  • Send the adobe form through webservices

    Hello all,
    i have a requirement in adobe form. When i click on submit button the total pdf form have to be sent through webservices and update as a string in a SAP ztable. so that i can retrieve the string and convert it into pdf again and reuse it.
    can anyone suggest, is it possible to do. Please suggest if anyone already worked on this scenario before or like.
    Thanks in advance,
    Prakash reddy .S

    Hello Sreelatha,
    I think we cannot hide a page.  as in, page is the main container.  In a container, we can hide any field using some scripting.  Even though if we hide the field, it is present on page but not visible. 
    but if some logic is there, please let me know.
    Thanks,
    Rakesh.
    Edited by: rakhi966 on Sep 8, 2011 8:54 PM

Maybe you are looking for