Open g vi in project folder

If I were using some open g vi, and I want to include those vi into my project folder, so that all my vi are under the same folder. What is the best way of doing this? Do I have to do a source distribution?
Kudos and Accepted as Solution are welcome!
Solved!
Go to Solution.

jyang72211 wrote:
If I were using some open g vi, and I want to include those vi into my project folder, so that all my vi are under the same folder. What is the best way of doing this? Do I have to do a source distribution?
That is a bit scary. VIs in the Open G Library can certainly be dependencies of a project. Projects, of course "Depend" on dependencies.
Now we get into HOW you want to use the tools! As an example, I lately went into a new client, installed SVN and LabVIEW 2013, added, VIPM from the Getting Started Window and also installed the Viewpoint TSVN tool-kit, and the Open G libraries, and felt "I AM READY TO ROCK!" (It was a small project)
That set up my development enviornment. Had I been working with multiple developers on that project .......... Either a VI Package or an SVN Repository OR a combination of them, would have allowed me to scale what and what scope of deployment was needed for libraries and components were appropriate for the development team without a claim that other tools were needed. - For development! (And really a "Source Distribution" is only there for a development reasons and, their might be better options- since VIPM ships with LabVIEW I'll let Michael A. speak on the utility of Source Distro Builds and discuss if they are obsolete)
But, for Deployment. ??? You should not need to add "Open G" to an app for a developed application, The VIs in the application are in the executable heirarachy.
So, can you elaborate on the original question please?
Jeff

Similar Messages

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.

If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from. When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done.

I am having trouble opening projects in Encore CS3. "project folder cannot be found"

Encore will not open my project files. I get the message "project folder cannot be found". Unlike Premiere Pro however it does not ask where they are.

Did you change the name on assets only? Or did you change the name of files/folders that were in the main En project folder? If the latter, then I think you're hosed. If the former, then En should ask you where they are when you open the project.
Try putting the top-level En project folder in the same parent folder as the En project file. If you can remember what the original parent folder was called, use the same parent folder. Leave everything else as is. Launch En from the Start Menu and choose the Open Project option from the Welcome screen. Navigate to where the En project file is and select that. Open the project.
What happens?

Imovie project folder will not open in toast titanium

Hi,
Just purchased a Lacie external dvd burner. I am trying to add my imovie project to my 1st dvd burn. When I try and open the imovie project folder none of my projects are highlighted and I can't pick them. Any suggestions?

What do I have to do now?
Find out what the "unsupported" format is and convert it to one that is supported if you can. (I.e., open the file in QT Player if it will open and check the "Format:" information line in the "Inspector" window to see what audio and video compression formats are contained in the file. If the file will not open in the QT Player, then check the Finder "Get Info" window to see what it says about the file contents.

How to reference a folder/file outside from project folder

Hi All,
I have two extensions which wants to share some code(files) placed in a folder outside from source directory.
for a simple case see the below example.
created a sample extension HelloWorld whose project structure are as follows
HelloWorld
     ExtensionContents
          lib/CSInterface-4.0.0.js
          jsx/InDesign.jsx
          HelloWorld.jsx
          index.html.
I have another folder say "sharedAssets" it contains two images "Orange.gif and pear.gif" which is at same location where HelloWorld and now folder structure becomes
HelloWorld > ExtensionContents
sharedAssets > Orange.gif
                         pear.gif
I have added linked resource folder see the attached screenshot
I have written following line of codes in index.html
<body onLoad="onLoaded()">
<div id="content">
<ul>
<li><img src="Orange.gif" width="42" height="42"/></li>
<li><img src="shared/pear.gif"/></li>
</ul>
</div></body>
but when I opened the extension then it failed to load Orange.gif and pear.gif,
Please let me know how I could reference an image placed in a folder outside from project folder.
Regards,
Alam

Hi Alam,
I don't use Eclipse / EB myself so I can be of no help in the way you set an alternate location folder there.
I've looked in the MXI reference but it seems there's no token equivalent to the "parent folder of all extensions" i.e.
/Users/Davide/Library/Application\ Support/Adobe/CEPServiceManager4/extensions
or whatever it will be in the future. This is where Extension Manager puts stuff when the MXI is something like:
<file   source="HTML/com.example.helloworld.zxp"
        destination=""
        file-type="CSXS"
        products="Photoshop,Photoshop32,Photoshop64"
        minVersion="14.0" />
that is, destination is blank, file-type is "CSXS".
I've never tried to put there stuff other than ZXP - you can give it a try.
An alternative escamotage could be to use an external folder, which path token exists both in MXI land *and* in (CSInterface or ExtendScript).
That is, a place Extension Manager installs your shared content; which path can be reached from the panel or the JSX.
As an example $userdatafolder/alam/shared in MXI, and Folder.userData/alam/shared in JSX, or SystemPath.USER_DATA/alam/shared in JS.
There are other product specific tokens (Photoshop Script folder for instance) where you can put things into.
Regards
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

How to change the default new project folder in Premiere Elements 13?

I keep all my projects on a different drive than the default My Documents folder. How can I change the default setting so that Premiere Elements does not try to create new projects in the My Documents\Pemiere Elements\13.0 folder? In fact, I do not want that folder to be used for anything (including layouts and styles).

steveb
Short version....
Referring to the 13.0 Folder in the Adobe Folder in documents, you wrote
In fact, I do not want that folder to be used for anything (including layouts and styles).
I do not believe that is possible.
For my best case scenario
Set the Scratch disks, not to Same As Project, but set for Custom with the set being the save location that you set for the project file.
Set the project save in, my preference, File Menu/Save As.
You are going to end up automatically with a 13.0 Folder in the Libraries/Documents/Adobe/Premiere Elements/13.0 Folder every time you open a Premiere Elements project. No matter how many times you try to delete the 13.0 Folder. And that 13.0 Folder will contain a Layout Folder and, if you applied a Style in the project, a Styles Folder.
Longer Version....
There is no problem directing your project file to the save location of choice. You can do that two way
1. After you open the project to the Expert workspace, go to File Menu/Save As to change the name of the project as well as the location for the save in order to avoid the defaults.
2. You can also do that through File Menu/New/Project.
That 13.0 Folder also gains its contents from the settings of the scratch discs in Edit Menu/Preferences/Scratch Disc - some examples preview files, disc encoding files, conformed audio files... Some Files/Folders are placed there automatically. So what to do to keep the Documents area clear of Premiere Elements files, project or otherwise after you have move all that you thought you could to a non Adobe default location? See above best case scenario.
Miscellaneous
1. If you set the save location of the project in either of the 2 ways, that setting will not hold from project to project. It will hold for that particular project.
3. If you set the Scratch disks in Edit Menu/Preferences/Scratch Disks, those settings seem to hold from project to project as well as for in the particular project.
Stevenb, please review and consider and verify. I have gone through several scenarios on what you would prefer. But, I do not see a way to make that happen with the programming that exists.
ATR

IMovie '11 How do I recover a project that appears within the IMovie Projects folder but does not show in the Project Library?

I have had my MBP for just over 3 months now! Yes, I made the switch and up until now I have been quite happy.
I now have my Time Capsule, Apple TV running and am generally getting used to life as a Mac user.............even bought Aperture and loaded all the family photos. Now time to make some Travel movies.
I have been working on a particular IMovie project for a few weeks now. Size is 365MB. Yesterday I closed IMovie and when accessing later that project is not available in the Project Library window. It does appear in the IMovie Projects folder but I cannot open it. I have copied the file to DVD just in case. All up I have 4 Projects, the other 3 are practice files, smaller but they do appear in the Project Library.
I have scoured the bulletin boards and tried many suggested fixes to no avail. Main suggestion was to remove the following files from Library/Preferences
com.apple.iMovieApp.plist
com.apple.iApps.plist
However, this did not sort out my problem. In the end I put back the original files.
Does anyone have a straightforward fix for my problem or is this one of those ongoing issues that that needs Apple's attention.
After all the file is there with the others. They are available.
I realise that I can restore from Time Capsule but I am missing the last three days thanks to 'drop out'.
Thanks.......

Gweggie Boy wrote:
Yes, considering we have an ongoing 'glich' within an Apple program with no obvious solution, we should be able to direct it straight to an Apple rep. I will peruse this possibility when I get a moment.
You can report the problem by providing feedback to Apple. In the iMovie app, from the menu select iMovie > Provide iMovie Feedback. This will take you to an Apple page where you can complete a form and submit it to Apple.
The fix for this will probably turn out to be simple/easy.....................so why doesn't Apple comment and/or address it????
Other than the forum moderators, Apple doesn't normally monitor these forums, nor make comments on posts. So, it's up to us to report the problem to them directly (using the feedback form mentioned above).
As the problem has affected me just the one time (touch wood), I haven't bothered to report it as yet. But, after seeing your posts on this, I'm now reconsidering that. Something must be triggering it. My system is in pretty good shape, so I'm guessing it must be a glitch of some sort, either in Mountain Lion or in the iMovie app itself. Perhaps it's a 3rd party app causing the problem? It doesn't give us much confidence now, in that we may start worrying about losing other projects.
A good practice is to duplicate the project from time to time (something I'll be doing more of), although Time Machine backups also provide the necessary security. To duplicate, in Project Library view (where all the projects are listed) click on the project name so that it is highlighted, then select File > Duplicate Project. Alternatively, right-click (or Control-click) on the project name and select Duplicate Project from the pop-up menu. Of course, you may already know this. Duplicating probably won't guarantee that the copy will not also disappear from the Project Library, but is worth doing anyway.
As I mentioned in the post I linked to earlier, when the problem arose with my iMovie project I was using ProRes 422 clips I had imported from a Final Cut Pro X Event. My immediate thought was that ProRes 422 had caused the problem. But this of course may have been coincidental - reinforced now by your experience, where you are probably working with Apple Intermediate Codec (AIC) clips.
Anyway, glad to hear that you've recovered your project through Time Machine. Unfortunately, I had to start from scratch as I had Time Machine turned off during my editing sessions (that's a story for another day).
John

Creating XML file in Project folder thru Java Program

hi,
i need one help. i need to create XML file in web://<Project Folder> in xmII thru Java Program. i created one java code and i am able to access XML file that is in c drive. i created jar file for this and placed as action block in Transaction and this working fine. but problem arises when i give file path in java code as web://<folder name>/file.xml which is in Web folder of project in xMII.
How to access the file that is inside web folder from java code.
regards
senthil

Hi Senthil,
you can address the files that inside the MII workbench are viewed as "web://..." like this:
http://<server>:<port>/XMII/CM/<Project>/<Folder>/<Filename>
The workbench helps you find the correct filename:
- open the WEB tab in the workbench
- right-click on the filename
- select "Copy Link" from the pop up
Now you have the correct link in your clipboard.You can use the "web://" only inside MII.
Michael

Robohelp 9 - Entire project folder of articles not publishing in Webhelp

This is a little convoluted.
I am running Adobe Robohelp 9.0.2. I have a project that has been working well until today. The HTML files are divided into folders. I added a simple snippet to one article in each folder. I published to Webhelp.
At first, I noticed that all the articles in one folder (which start with the same name [IACH]) are missing from search results. All other files in the project itself are working in search without difficulty, but this one entire folder was missing from search, but ALL of the articles from that folder were available via the Table of Contents. I also noticed that the snippet wasn't publishing on the one article in that folder that I'd put it on - though it appears in the article in Robohelp. At that point, I toggled to the Snippets module and my snippet list is blank. Though the snippet files are still in the actual project folder, they don't appear in the module anymore.
I thought that the snippet being on that one article might be the issue, so I converted it to HTML text and published again. Now? Now all the file names appear in the ToC, but I can't open any of them AND they still don't appear in search.
It looks like somehow this one, single sentence snippet has done severe damage to my project.
Any ideas?

All very weird but I doubt your project is broken. I see no connection between adding a snippet and search going awry.
First you can simply right click in the Snippet pod and import the snippet back into the project.
Then I would close Rh and trash the CPD file. Reopen the project and regenerate the help making sure you hadn't accidentally changed anything in the Search settings.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Link to another Project folder

I need to link to a module in another project folder. I used
the click box and in the On Success chose Open other project and
picked the swf file using the elipsis. However, when I ran it, it
was looking for the file in the same folder as my current course
not in the other project folder. Can I not link to another project
folder using Captivate. We want to reuse components from one
project to another without having multiple copies in every folder.
Thanks for all your help.

With JavaScript, you're limited primarily by your
imagination, so the example I offered was intentionally generic.
In practical use, you would probably want Captivate to pass
only the destination folder & filename and let the JavaScript
function create the full path. Assuming the relative folder
structure is the same on each server, you'd only need a single
generic function.
For example, if you wanted to launch a file named
"introduction.htm" in an adjacent folder named "course02", you
could add the following to Captivate:
javascript: goToMovie('course02','introduction.htm');
and add the following to your standard.js file (so it gets
automatically propagated to each published course):
function goToMovie(strFolder, strFile)
var arrPath = window.location.href.split('/');
arrPath[arrPath.length-2] = strFolder;
arrPath[arrPath.length-1] = strFile;
window.location.href = arrPath.join('/');
The Captivate function passes the folder and file name as
quoted string variables and the JavaScript function then uses those
variables to create a new URL. You can get as fancy as you like,
such as adding logic to go up more than one folder level, but
hopefully you get the general idea.

Template does not appear in project folder

Hi
My template has disappeared from my project. Therefore, I
have tried reimporting the template to the 'Templates' folder in
the project folder. When I do this, I do not get an error message.
But the *.htt file does not appear in the 'Templates' folder and I
cannot attach it to help texts?? When I open my file manager I can,
however, see that the *.htt file is indeed placed in the current
project. Can anybody help?
Thanks
Lena

Yep! These forums are littered with problems caused by
working over a network. RH is essentially an Access DB and this has
well documented problems with networks. Work off your hard drive
and back up to your network each night. That's works for me. Try
importing your template once you've copied your project to your PC
and come back if you still have problems. You may have to recreate
your template as it is not impossible that the .HTT file has become
corrupted.

Project folder missing

I have been working on a project in FCPX for a couple of weeks. I was storing everything on an external hard drive and it seemed to be loading fine. The program itself lagged a lot, and was very slow on rendering, but it was workable. Yesterday it crashed and today it crashed twice. When I restarted the computer, I opened FCPX again and my project wasn't loaded. Looking at the external the entire Project folder seems to be missing, and I have no idea what could have caused it. The event folder is still there, and all that info loads properly like it was doing before. Is there any miracle that might bring my project back? And is there anything I can do to ensure this doesn't happen again in the future? (I've looked at Preference Manager, but I'm not sure if it applies?)

I already a Projects folder on my internal drive with other completed files that are still there. I'm totally certain that I saved to the external. A spotlight search unfortunately didn't yield anything.

Logic Projects folder / troubles / lost

Hi, i bought a new macbook, when i installed "Logic" i didn't move my project folder from my old mac to the new mac. i worked on some new stuff on the new mac, finished some projects, and then decided to open few old ones from the old hard drive (old macbook). i plugged an external hdd (from old macbook) into the new computer and opened project files from it... afterwards, i couldn't find projects which were created on new mac, except one which was saved on the desktop. They are not showing in "recently projects" folder and can't even find them thru the spotlight...

Thats the problem! there is only one project, which i actually start before i plugged external hdd, so where is others projects ? doesent make any sense

Opening and editting a project

Hello,
I need help with openning a project that was published in Dropbox. For some reason I cannot open to edit the project.
Please let me know what to do.
Thank you!

It was "published" into a Dropbox share? If so, it's probably in .swf or HTML5 and therefor not editable in that format. You need the original .cptx file. If it is a .cptx file that you're referring to, try pulling it out of the Dropbox folder to your desktop to edit.
Hope this helps.

Images are missing in Aperture v2.1.4 after Project folder is renamed.

I was working with a batch of pictures (images) in Aperture the other day. Opening new projects and renaming some old projects. All to add some meaning to the content of the Projects. I had 150 pictures (images) in a "Colorado" project folder and decided to rename the project to "Colorado 2011". Looked for the images in "Colorado 2011" to make an album and there are no more pictures. All have disappeared.
Can everyone tell me how to recover the pictures (images)??

I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
Backup first.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Open g vi in project folder

Similar Messages

Maybe you are looking for