Open session problem.

I am using 11.1.2.1 Jdeveloper and i have problem with open sessions.
I set in appModule pool, min available size: 0
I set in Db Conexion pool, min available size:0
This are the step i am doing to get the problem:
- I Clic on search button from inputListofValue, until request end i turn off pc wifi.
- I wait 1 minuts and then I turn on pc wifi again.
- Open another window from Internet Explorer and enter to the same web page.
After that i check session and i find two open session:
1 - first session is executing a query ( is the query from list of value)
2 - second session is inactive (session actually i have)
I take a picture in this moment:
http://s2.subirimagenes.com/imagen/previo/thump_7690052open-connections.png
after wait idle timeout from appModule pool the second session die but first session is open.
First session is executing query for eternity!! I hear that ADF kill transaction when transaction time is long but maybe dont work bc i check next day and first session is open.
I dont want to check disconnect db conexion option from appmodule configuration bc that force to kill sessions after each request and that lose temporal table data.
Any help plz??

Hi
I find there is jbo.ejb.txntimeount in appmodule properties
descriotion says:
time after the application module session bean transaction expires
by default is 1830 = 30 minuts.
but transaction is never killed... so maybe a bug?? bad configuration??, hlp please

Similar Messages

Open Session: unexpected error

Hi everybody,
I'm using BO XI R3.0 and since couple of last days I'm having problem with opening Universe Designer. The message I'm getting is "Open session: unexpected error". This happens after I provide user name and password for the access to the system.
Does anyone know the solution to the problem beside uninstalling Client tools etc. (I already did that) because the same happens when I want to open Desktop Intelligence, Translation Manager, etc.
Ivan

In addition to my previous question, I have another query. I am trying to create a macro to rename, hide/show and change some more properties of universe objects. Below is the code to log on to designer and open the required universe
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Set DesignerApp = New Designer.Application
    DesignerApp.Visible = True
    Call DesignerApp.LogonDialog
    Set Univ = DesignerApp.Universes.Open
    DesignerApp.Visible = False
    Set Wksht = ThisWorkbook.Worksheets("Objects")
    Wksht.Unprotect
    Range("Objects").ClearContents
    Call GetObjectInfo(Univ.Classes, 1)
    Range("Objects").Resize(Wksht.UsedRange.Rows.Count - 1, 5).Name = "Objects"
    Range("Objects").Columns("H:L").Value = Range("Objects").Columns("B:F").Value
    Wksht.Protect
    DesignerApp.Quit
    Set DesignerApp = Nothing
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
What happenns is that after I log on using my macro, if I try to log on to designer again I get the "Open Session: unexpected error" error. If I delete the LSI folder on my local machine, then I can log on fine. but everytime I use the macro I get the error afterwards. I am logging onto a SAP system.
Any help on this one?

What is the proper way to close all open sessions of a NI PXI-4110 for a given Device alias?

I've found that, when programming the NI PXI-4110 that, if a the VI "niDCPower Initialize With Channels VI" (NI-DCPower pallette) is called with a device
alias that all ready has one or more sessions open (due to an abort or other programming error) a device reference results from the reference out that has a (*) where "*" is post-fixed to the device reference where and is an integer starting that increments with each initialize call. In my clean up, I would like to close all open sessions. For example, let's said the device alias is "NIPower_1" in NI Max, and there are 5 open sessions; NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4). A simple initialize or reset (using niDCPower Initialize With Channels VI, or, niDCPower Initialize With Channels VI, etc.) What is the proper way to close all open sessions?
Thanks in advance. Been struggleing with this for days!

When you Initialize a session to a device that already has a session open, NI-DCPower closes the previous session and returns a new one. You can verify this very easily: try to use the first session after the second session was opened.
Unfortunately, there is a small leak and that is what you encountered: the previous session remains registered with LabVIEW, since we unregister inside the Close VI and this was never called. So the name of the session still shows in the control like you noted: NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4), etc.
There may be a way to iterate over the registered sessions, but I couldn't find it. However, you can unregister them by calling "IVI Delete Session". Look for it inside "niDCPower Close.vi". If you don't have the list of open sessions, but you have the device name, then you can just append (1), (2) and so forth and call "IVI Delete Session" in a loop. There's no problem calling it on sessions that were never added.
However - I consider all this a hack. What you should do is write code that does not leak sessions. Anything you open, you should close. If you find yourself in a situation where there are a lot of leaked sessions during development, relaunching LabVIEW will clear it out. If relaunching LabVIEW is too much of an annoyance, then write a VI that does what I described above and run it when needed. You can even make it "smarter" by getting the names of all the NI-DCPower devices in your system using the System Configuration or niModInst APIs.
Hope this helps.
Marcos Kirsch
Principal Software Engineer
Core Modular Instruments Software
National Instruments

No more than 1 sessions at a time are allowed. Please wait until open sessions expire.

I have been unable to log into my Actiontec MI424WR router this week, The router returns the message "No more than 1 sessions at a time are allowed. Please wait until open sessions expire." every time I try to log in. This has been going on for days. Even pulling the power to reboot it did no change. I'm the only user in the household that would log into it, so I don't understand how this could occur. How can I get in?
GLN2

I really don't want to do a hard reset as I have a handful of custon port forwarding rules that I had created. I'm not a wiz at that, so it would take me too much time to re-create! I may have no choice. Next time I can get in I will try the backup of the config file. I hope it contains the port forwarding rules.
The backup function should work fine, I have used it to save my Steam port forward rules to my hard drive, after a pin hole reset I was able to restore successfully. I did configure mine to 1 session & ALWAYS logout when I am done. I have never had any problems logging into the router. But in your case you may need more than 1 session allowed.
Are you using a native or 3rd party app to remember your router ID/password? IF you are do not do this, you are "defeating" the built in security of the router
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Getting error code -251723766 returned from the "EthernetIP Open Session.vi" while trying to talk to a PLC

I have created a LabVIEW application using LabVIEW 2012 (64 bit) that attempts to communicate with a PLC. I do not actually have the PLC here at the Rockwell Collins facility in Cedar Rapids, Iowa.
I have sent this application to my co-worker, who is located at a different Rockwell Collins facility in Tustin, California, where the PLC is actually located.
My coworker in California is reporting that when he starts up my application under WIN7 he gets an error code of "-251723766" when the S/W performs the "Open Session" function during initialization.
I looked at the online help and the value "-251723766" is not defined.
When I run the same application under WIN7 here in Cedar Rapids I do NOT get the runtime error code of "-251723766" during initialization.
Do you have any ideas for what is causing this problem?

Hello
I never really understood what the session parameter was all about.
The documentation says that the session parameter is optional.
Based on your advice I have deleted the code from my block diagram that was doing an Open Session.
Are there any example LabVIEW programs that I can study that actully use the Ethernet/IP S/W to connect to a PLC?
I have attached 2 screen captures that show how my LabVIEW VI's are accepting the session parameter.
Do you think I should delete the input and output parameters for session?
Please let me know.
Thank you
Todd J. Miller
319-295-8689
Attachments:
OpenSessionProblem#4.jpg ‏107 KB
OpenSessionProblem#5.jpg ‏189 KB

Facing short dumps when trying to open session in CSA

Hi
All am facing Short dump when i am trying to open session in CSA
Error detials:
go to System Administration workcenter task management up CSA. Choose the Solution
got short dump:
Short text
    Length error occurred in IMPORT statement.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "LOAD" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    During import the system discovered that the target object has
    a different length than the object to be imported.
Missing RAISING Clause in Interface
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.431
    Module type                             (METHOD)
    Module Name                             LOAD
Trigger Location of Exception
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.514
    Module type                             (METHOD)
    Module Name                             LOAD
Please help me to solve this problem
Regards,
Neni

Hello Neni
According to the information I saw in that post it could be caused by a sort of inconsistency of the program code vs a structure.
Wether that is a bug that is in your SAP Solution Manager release or something that is caused by administrative actions (perhaps solving SPAU entries after SP stack update or upgrade) I cannot tell.
I would recommend you either try and find a relative SAP note (narrowing down result to only your SAP Solution Manager system) and searching using the dump keywords. If you cannot find anything I would recommend you to open a customer message so SAP can take a look at the specific error.
If you give more information, perhaps someone on the forum can help you out abit better, which SAP Solution Manager version and so on.
You also didn't answer my question, any recent changes you are aware of ?
Kind regards
Tom

Basler camera slow to open session

I have 5 Basler scA1390-17gm cameras that were purchased at the same time. Four of them behave nicely, but one is very slow to establish a session. I have checked the IP configuration and that all seems fine. MAC finds the camera and puts it on the listm but every time it is selected in MAX or every time a vi opens a session to it, the delay is about 20-30 seconds. All of the other cameras open sessions within a second. Once the session is opened the camera can be triggered and read just fine. Is there some configuration problem that could cause this delay?
LabVIEW 2009
MAX 4.7.1f8
IMAQdx 3.4
Richard
Solved!
Go to Solution.

Hi Richard,
One possibility is that the cameras have different firmware versions with different GenICam XML files. It is a known issue that the Basler XML files have grown considerably in size/complexity with each firmware release as they add new functionality. The GenApi component that parses these XML files had some scaling issues that meant it got considerably slower as these files became more complex.
You could confirm if this is the case by looking at the Camea Attributes tab in MAX and finding the "Primary URL String" feature under the Camera Information section (you need to select All Attributes from the filtering). Look at the URL strings between the fast and slow cameras and see if they point to the same file name.
Assuming this is the issue, the best solution would be to consider updating IMAQdx to the latest version just released. This version uses an updated GenApi component that has had considerable speed increases implemented in XML loading. Even on the larger XML files it is quite fast. You can grab this as part of Vision Acquisition 2012 here: http://joule.ni.com/nidu/cds/view/p/id/2975/lang/en
Eric

Session problem in jsp application

I face a session problem. I setting everything in a session and when pass back to a main page, the value is not display in the screen. But after refresh the value will display in the screen and this kind of problem only come out very few time and i dun knw how to solve this...
Anyone here can give me some idea and suggestion or the way to solve this kind of problem!!!

define "2 different clients"
1) You have 2 different PCs and it's using the same session ID for both? I doubt this. I think the server is advanced enough not to use give a session ID that's already been created.
2) You have 1 PC and are using IE or Netscape and using File > New Window to open a new window and connect again. This you can't fix without using only URL rewriting to manage session, because the different windows will share the same session cookies.

Opening last opened sessions when its start, no thumbnails in the new tabs,

my firefox always opening all last opened sessions when its start,
no thumbnails in the new tabs, its really blank tab, there is no toogle to open thumbnails
i try to "restore to default" in option menu, its only fixed the "opening last opened sessions"
then i try to reset firefox and it solve the problems in a time
then i restart my computer, start firefox, and all the problems came back again
is there any solutions without reintalling my firefox?
Thanks

What is the Startup setting?
*Options > General > Startup: Home page
Is that "Show my windows and tabs from last time" or one of the others?
You can check if you have a user.js file in the Firefox profile folder that sets the browser.sessionstore.resume_session_once pref to true.
*http://kb.mozillazine.org/browser.sessionstore.resume_session_once
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
You can also check the settings for "Clear history when Firefox closes" in case this feature is enabled and if enabled then disable this as a test (i.e. remove the checkmark).
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [ ] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Make sure that the disk cache is enabled and working because the thumbnails on the about:newtab page are generated from the disk cache. You can check the on the about:cache page (there should be disk cache section).

MAC MINI BLOCKED AND PASS OUT THE OPENING SESSION SCREEN

Hi, i hope someone can help me.
(i'm a french user, so i'll try to write a good english)
I've a mac MINI (2006) Intel Core Solo
Mac OSX 10.4.11 Tiger
I've no problem since some days.
I'm not the usual user.
Is the problem description :
• I start my Mac mini by pressing the button.
• "dong"
• I see the apple on the screen with spiral progression, all right.
• after around 15 sec. normally, at this moment, the opening session screen must appear… (there are 2 users, one administrator [with password] and one guest without password) but it don't.
• After a brief flash between two different screens (blue-gray),
the gray screen with the apple and the spiral progression re-appear but BLOCKED.
• There are some pixels lost in disorder at the top-left of the screen (the place of the starting mouse-arrow).
• After some minutes, or when i click away (i really don't now exactly when…)
The session of the guest starting normally (with some slownesses)
• I've a AirPort connexion with an iMac (Leopard 10.5.5).
• I've noted that someday, my usual network connexion have been changed (on the mac mini only), and my Mini tryed to connect with the connection of a neighbor.
As if this connexion have been selected by default.
•• I've tryed to restart, close the session etc.
•• I've lunched the disc utility to verify the HD…
•• And finally, I've passed out the problem with changing the account parameters :
Open the session automaticaly as a guest. Passed out but not resolved !!
••• THE PROBLEM STILL HERE, but for a few seconds only
(blocking lasts only two seconds).
So, can someone help me ?
What type of problem can it be ?
I hope someone has allready resolved it !
Thanks for reading.

Hi you, i love your post…
So, i suggest you :
- In the account parameters (in préf. sys.)
- Delete the guest account created.
- Specify start automatically as "your Admin. name"
- Restart your computer.
- Go one more time in the Account param. pane
- Create a new guest account and modify some settings (such as display of the file for users in opening session screen etc.)
- Specify automatic start with guest
- Restart you Mac Mini.
Of course you have note that i've solved (for the moment only ?) the problem.
But i must say it for others, if someone has the same pb.
When my Mac Mini was Blocked, in fact, the computer seems all right but the display not. As the opening session screen was behind this static grey-apple-screen.
In addition, i've forgotten that there is an other screen with
"Démarrage de Mac OS X en cours…"
So, when i've unplugged my screen during the blocked screen,
and re-plugged it, all returns right : i can see my opening session screen…
So, if some one can tell me what is the problem exactly…
I'm curious.
So, at this moment, i've started my Mini once time only.
I hope all stay right in future…
Thanks so munch to me for my response.
:]

IVI-C switch step open session error

In my current Test Stand 3.5 sequence I start by using niSE open session.vi to begin a new switch session. I then pass this handle along to other VIs for switching, which works perfectly, and then at the very end of the sequence I pass the handle to a niSE close session.vi. The problem I'm having is now I want to start using the built in IVI-C Switch steps. Everytime I insert one of these steps in the middle of my sequence I get an error because the step appears to be trying to open a new session, when one is already open. Is there a way to pass the currently running session handle into the "virtual device name" of the switch step so that it doesn't try to open a new one?
Thanks,
Jason

Hi Jason.
This is known bug in TestStand and it is currently being addressed CAR ID #125874. Basically when the NISE session is closed, TestStand doesn't actually dispose of the session but rather hangs on to it until the execution window is closed.
There is a workaround:
Create a statement step after you close the NISE session, and call the following.
RunState.Execution.TSIviStepTypes_AnchorName_For_NISE Virtual Device = nothing
where NISE Virtual Device is the name of the NISE device that you want to end the session to.
Chris
National Instruments
Applications Engineer

Open Sessions SAP B1.

Hello Experts,
I got this problem. Since we upgrade to SAP 8.81 PL05 SQL keeps Open sessions from SAP users,
then when the user try to log in an error shows that the user is already logged on ...
then when i kill sessions on SQL the user is capable to log in to B1
have you ever see this ?
thanks for the help
regards ...

thnx for the answers, i will check this and let you know.
As far as I know I have seen this with 3 diferents enterprises ...
I will update as far as I can ...

Sessions problem starting a new task.

Hi,
I have used
CALL FUNCTION 'ABAP4_CALL_TRANSACTION'
    STARTING NEW TASK 'XXXX'
    EXPORTING
      tcode                 = 'ZTRX'
    EXCEPTIONS
      communication_failure = 1
      system_failure        = 2.
where a program/report is called by ztrx transaction. xxxx is never defined and I hope this is correct. I have the problem that after starting the transaction ztrx in a new session, if an error occurs, is very difficult o sometime impossible to kill sessions opened.
Is there a method (using a different call FM or specific tests) to avoid multiple and not controlled open sessions?
Many thanks in advance for your kind cooperation.
Regards,
       Giovanni

if you are seeing:
#### Java Web Start
try turning on all tracing and see if more information is shown in trace file.
(in 1.4.2 or 1.5.0 create file ".javawsrc" in your home directory with:
TraceBasic=true
TraceSecurity=true
TraceNetwork=true
TraceTemp=true
TraceCache=true
then turn on tracing in the Java Control Panel.
/Andy

Active Sessions problem for JMX client

Hello,
I've written my own JMX client to pull data from MBean Server using instruction from Connecting to an MBeanServer - SAP NetWeaver Composition Environment Library - SAP Library. Client is connecting to server every 5 minutes. After some time I noticed that Active Session Count is rising. Also when checking Login Sessions in VA I see multiple sessions for username provided in JMX client configuration.
My understanding of this situation is that I initiate new session using RMI-P4 connector, but never terminate it which leaves opened sessions on the server.
My question is, is ther a way to close connection to MBeanServer?
Best regards,
wojtek

Good morning Jeremy,
The URL works fine. The only thing in the NetWeaver log is the NullPointerException.
Hmm... Just brainstorming here.
The id I am using is the one having the problems with NetWeaver not filling in all the MII session variables. I suppose there could be a null pointer because of one of those variables being null... I have an open OSS message about that issue. Although that would affect the URL too.
Would it be a good idea to have the Basis guy check the logging level in NetWeaver? seems I only see error and fatal.
Thanks for the suggestion.
--Amy Smith
--Haworth

Microsoft Access Open Session Prompt

We currently use Crystal Reports 6.0 32-bit with an Access 2.0 database. When I click on the refresh button or Verify Database within Crystal, I get the Microsoft Access Open Session error that prompts for a user ID and password. I also get this error even when I access the sample reports that came with Crystal Reports. I have tried this with Crystal Reports 6.0 and 7.0 (32 bit). Any one know what the problem could be?

Hi
It might be possible that some of the dll files have got corrupted. You can search if you have duplicate dll files of Crystal reports on the machine.
Try repairing the software from Add/Remove programs. After installation restart the application.
If that doesn't help go for a uninstall of the software and reinstall.
Regards
Sourashree

Open session problem.

Similar Messages

Maybe you are looking for