Open shipping notification in md04

Dear Experts,
Please suggest how we can handle the qty differences arising from the goods receipt or return delivery in case of using the goods receipt w.r.t inbound delivery in system.
In MD04 the diffrential quantities are shown as open shipping notification, but our requirement is that the inbound delivery should have the status closed in case of partial GR or return delivery.
In case of automotive goods receipt there is configuration for quantity difference profile, but for organization like us who are in manufacturing how to overcome the same.
The main motto is that we do not want any open shipping notification in md04 how to achieve that.
regards

Hi
There are no the standard ways to handle certain type of MRP elementt like the shipping notifications to be excluded unless you put them into a storage location excluded. (MRP indicator 1 in transaction MMSC).
However, SAP delivered some BADIs to allow the customer write their own source code to control them, e.g. the BADI
MD_CHANGE_MRP_DATA, it contains some methods below.
CHANGE_MDPSX_MDBS Change data when importing purchase order/ delivery sched.
CHANGE_MDPSX_MDLA Change data when importing shipping notification
They are called in MRP/MD04 etc after reading the PO or shipping notifications then you can decide if they should be excluded or not by your own source code, please read the documentation of them in SE18 on how to implement.
Leon
Regards.

Similar Messages

After Return Delivery to Vendor cannot remove shipping notification in MD04

Hi.
Good Day.
I would like to ask help regarding to my issue.
We had to create a return delivery to send the goods back to the vendor A. The packaging item was blocked and we created the outbound delivery via transaction MBRL with reference to material document when we do GR with the inbound Delivery A. After having processed all necessary steps including the posting of the goods issue of outbound delivery, the inbound delivery A is again open and expects a goods receipt of the returned units. This can also be seen in MD04. Meanwhile the supplier has sent a new "compensation" delivery, with a different inbound delivery B. This was goods receipted and with this delivery the complaint/return process is finished from the supplier's and our point of view.
Problem: What remains is the original open inbound delivery A. Currently we have no idea how to get this one deleted, but we need to cancel it, because there won't be a credit note and there won't be another physical delivery for this inbound delivery A.
What I have done so far:
1) Tried using VL09 to inbound delivery A but there was no effects. probably because the inbound delivery A is already closed.
2) It is not possible to set the item of SA to finished because we my use that item again.
Thanks for your help.
Med'z

Hi Madhu.
Good Day.
First of all I really appreciate your response.
I tried to change the first inbound delivery but canu2019t do much. Because all fields were block since it is already completed.
The system shows the error "The goods movement status (partially or completely processed) does not allow the item to be deleted."
I also tried to change the schedule line but it didnu2019t do any effect with the issue.
Thank you,
Best regards.
Medel.

Open inbound deliveries in md04

Dear Experts,
Please suggest how we can handle the qty differences arising from the goods receipt or return delivery in case of using the goods receipt w.r.t inbound delivery in system.
In MD04 the diffrential quantities are shown as open shipping notification, but our requirement is that the inbound delivery should have the status closed in case of partial GR or return delivery.
In case of automotive goods receipt there is configuration for quantity difference profile, but for organization like us who are in manufacturing how to overcome the same.
The main motto is that we do not want any open shipping notification in md04 how to achieve that.
regards

Hi,
Set delivery completed indicator in MIGO in case of partila GR. Then the system won't allow you to do furhter GR. I n MD04 also shows as closed and not open.Thanking you

How to deleted the shipping notification record in the MD04

Hello Expert,
We have a very strange things here.
We have a Schedule agreement which need confirmation control for good receipt - means we need inbound delivery for the good receipt.
1. We have 20k open qty for delivery in the schedule line of the SA.
2. An we create an inbound delivery with reference to this SA with delivery qty 20k,
3. but when user discover that there is only 15k stock ready for good receipt, then he want to delete the inbound delivery and create a new one again.
4. user use an customized program to delete the inbound delivery, but there is some problem in this program, the inbound delivery was deleted successfully, but we found this shipping notification still existing in MD04 view.
5. And we double check confirmation overview in the schdule line for this item, we still found this inbound delivery existing in the list.
6. Then we try to use VL31N to create the inbound delivery with reference to this SA again, it is showing no stock for this material for good receipt as we don't have any open delivery qty for receipt. The existing 20k stock still waiting for good receipt although the inbound delivery was deleted.
Is there any method we can deleted this shipping notification in the MD04 and the entry with 20k in the confirmation overview of the SA?
Thank you very much for your help.

Hi shiva,
Thanks for your program, I ran this program, but it can find nothing.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Regeneration of Sales and Delivery Requirements
ATTENTION: Only simulation
Simulation Only
List contains no data
Deleted Records in Total: 0 Single 0 Collective
Generated Records in Total: 0 Single 0 Collective
Total Elapsed Time: 119 ms
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Please advice,

PO as well as its shipping notification show up on MD04.

Hello friends,
I have a PO for qty = 2. There are 2 shipping notifications for qty = 1 each (PO history tab also show the same).   With these Shipping Notifications, we expect the PO to be removed from MRP-List/MD04.   However, both the Txn show PO with qty = 1 as balance (and hence total receipt qty = 3).   Any suggestions as to what is going wrong here ?
Thanks,
- Chetan

For Honme Button try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
You can live with the existing battery life or
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery ourself if you are up to it
iPod Touch Repair – iFixit

MD04: Asterix after modifying a Shipping notification.

Hello,
is there a possibility, that after modifiying a Shipping notification in VL32n, e.g the delifery date, that the user see aftterwards a asterix (*) like the fixed scheduling lines from MM?
Thanks for your help.
Regard,
Michael

Hello,
has no one also this question in his/her company to develop?
Regards,
Michael

MD04: Asterix (*) should be available after modifying a shipping notif.

Hello,
is there a possibility, that after modifiying a Shipping notification in VL32n, e.g the delifery date, that the user see aftterwards a asterix (*) like the fixed scheduling lines from MM?
Thanks for your help.
Regard,
Michael

Hello,
has no one also this question in his/her company to develop?
Regards,
Michael

MD4C order report for shipping notification doesnu2019t display any component

Dear guru ,
I have created a shipping notification for a subcontract order.
If I run order report (using MD04 or MD4C) for shipping notification doesnu2019t display any component.
I have seen note 498217.
Any workaround does exist ? What do you suggest ?
I need to have a confirmation date from vendor but also to have a pegging of the requirements.
Thanks in advance.

Any suggestions to this? I have the same problem
rgds
GAR

Shipping notification and PO outstanding qty in ATP check

Hi all,
I have the following situation: intercompany purchase order process with confirmation control key (including outbound and inbound delivery). In my ATP check I have included purchase orders and shipping notifications. This has as consequence that after the outbound delivery is created and outstanding quantity remains open in the PO (due to the nature of our business), this will disappear when the PO is received. However, while this qty is open, it could be taken into account as available to promise and it can lead to unreal sales order confirmations.
Does anyone know if there's a way to eliminate this outstanding qty without changing the PO qty and keeping PO's and shipping notifications in the ATP check.
Thanks in advance.
JC Garita

Dear KANTH,
Documents without order number in ATP are always temporary quantity assignments (TQAs). If the order number was known at the time of running the ATP check, the TQA carries the order number, otherwise it carries e.g. <unknown>. The TQA carries order number <unknown> until either the item is converted or a new ATP check is executed.
Please also have a look at the note 488725 mainly points 4.,5. and 8.
You can delete the old assignements with the report /SAPAPO/om_delta_remove_older (via SE38).
Alternatively you can delete the TQA's manually. Use transaction /SAPAPO/AC06., just delete the user and generation date and execute.
The system behaviour should be fine after the deletion of the hanging TQA's.
Regards,
Tibor

Receiving point in Shipping notification

Hi all,
I would like to make the Receiving Point (LIKP-VSTEL) changeable in the Shipping notification, is that possible?
Thank you very much,
Annabelle

Hello, we have been able to solve this issue.
The problem was that when we created an inbound delivery from an NB purchase order, the receiving point was not automatically determined in the header Shipment view. And the field was not changeable. So users were not able to cancel a goods movement via VL09: "GI for delivery & cannot be canceled for the following reasons: You are not authorized to cancel the goods issue for shipping point &".
The reason is that in inbound delivery, as per the standard functionality the receiving point is grayed out. In order to open the field the standard program needs to be modified.
If you want your system to determine the receiving point automatically: IMG > LE > Shipping > Basic Function > Shipping Point and Goods Receiving Point Determination > Assign Goods Receiving Point for Inbound Deliveries.
Then the receiving point will be determined automatically when you complete the storage location in the purchase order.
Regards, Annabelle

Shipping notification delivery date 1970

Hi,
For few shipping notifications we see in MD04 the delivery date as 01.01.1970 . How this date is generated for a current shipping notification?
Thanks,
shan

Dear,
If you use Transaction VL02 to apply further items of a sales order to a delivery (deliver the order) and then change header data of the delivery in the same transaction, incorrect updates may occur to statistics which use date fields of the delivery header as the periodicity. due to this affects the update of the cumulative delivered quantity (S073).
If you change header fields of the delivery, the system may not save the changes on the database. The problem occurs, for example, for the delivery date in the shipping notification or in delivery which is not saved with the current status.
In the above case, the old data is cleared with an incorrect date database status of the delivery header has to be in structure YLIKP. Also check the configuration of Sales Document Type " for Requested Delivery Date.-------"Propose Delivery Date"
Regards,
R.Brahmankar

ASN-Advance Shipping Notifications

Hello Experts,
I got the requirement to prepare a report for advance shipping notifications.. can any one guide what r the tables involved and the fileds involved to prepare the report.. or any one post me a sample code that would be really helpful for me
thanks alot in advanse
~~Guduri

Hello Shahuraj,
I got most of the info that i need for my requirements. But i need some more info for my following requirements.
1) List All Open ASN : what does Open ASN means and how do i find it?
2) List all ASNs from a certain vendor: Any further details ?
3) List all ASNs for a certain material: I guess we can get this from EMATN field of EKES table. Am i right?
4) List all ASNs under a certain MM Scheduling Agreement: Pls throw some light on this ?
are there any function modules which get me this details? this would avoid me writing the code from scratch..
Thanks,
Kishore Babu

Is there a way to open the notification pane using magic mouse?

Is there a way to open the notification pane using magic mouse? i mean it would be great if i could two finger swipe to the right for the notification pane (two finger swipe left opens dashboard)
I have Magic Prefs if it helps

It doesn't seem like this is possible in 10.9.1. Can someone at Apple confirm or provide a solution?

Creation of a shipping notification for a PO in EBP from a XML file via XI.

Hi everybody.
We are trying to create a shipping notification for a Purchase Order in Enterprise Buyer from a XML file via XI.
For to do it, we are using DespatchedDeliveryNotification_In message interface (transaction SPROXY).
But when we execute it, the system show us next message:
"An error occured within an XI interface: An exception with the type CX_GDT_CONVERSION occurred, but was neither handled locally, nor declared in a RAISING clause Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F5B; Line: 4"
No more information is available.
Is there any additional transaction to see more information about the error message?
Is there any documentation about this XML file, mandatory fields, examples?
We populated some fields in our XML file, but we do not know if the problem is with mandatory fields, data, program error
I will thank for any information
Thanks in advance.
Raúl Moncada.

Raúl,
This is because of the inbound UOM.
The include LBBP_BD_MAPPING_SAPXML1F5B is in charge of mapping the item Unit Of Mesure (UOM) sent in the ASN XML file (it should be an ISO code).
You can test FM UNIT_OF_MEASURE_ISO_TO_SAP with this inbound ISO code.
PS: you should create an OSS message so the mapping sends back an error message instead of generating an uncatched exception (that generates a dump).
Rgds
Christophe
PS: please reward points for helpfull answers

Cannot do MIGO in Third Party Sales Process with shipping notification

In the Third party sales process with Shipping notification,the item category for the material is TAS (Billing relevance=R),item category group is BANS.
Intially sales order is created,then using me21n with reference to purchase requisation purchase order is created,then in MIGO stage i used the PO No there but i get the message no item found in PO.
what adjustment have to be done in order to do MIGO

Refer following SDN thread, by that you will be able to get overview on best practices about Third Party Sales & necessary configuration you need to follow for statistical GR:
- Third party direct shipment (II)
Further maintain Billing Relevance for Item Category as G - Order-related billing of the delivery quantity.
Regards
JP

Open shipping notification in md04

Similar Messages

Maybe you are looking for