OPendoc in BOXIR3 with Passing prompt values

I am using opendoc to open webi reports from dashboard and it is working fine howevever when i try to pass values to the existing prompts using &Iss its not working and prompt appears,refresh on open is set for the report.
Please let me know the correct syntax of open doc to pass a single value to prompt in BOXIR3.1

Ranjit Singh
Have a look here also:
http://www.forumtopics.com/busobj/viewtopic.php?p=326129&sid=d99eeaba982cdbad7cbba86695945613
Linking 2 web I reports
I'm Back

Similar Messages

How to pass prompt value to columns with formula?

Hello guys
I have a situation:
I have a report with 1 column name 'product' and in this column it has a case statement like 'case when item is ('a','b','c','d') then 'Men' else 'women' end'
Then I have created a dashboard prompt of the exact same column, and I defined the same case statement in the prompt's column formula as the same.. Then I tested the prompt and it is returning only 2 values 'men', 'women'..
However, when putting the prompt and report on the same dashboard, the report is not accepting the prompt values..
Then I set the presentation variable on the prompt and call it 'Product', then in the report I created a filter on 'product' column as equal to presentation variable 'product'--- I tried with and without single quotes.. So the filter itself looks like : case when ...... is equal to / is in @{product}
However, when I then return back to the dashboard, I am getting the error:
State: HY000. Code: 388918336. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27005] Unresolved column: "Product". (HY000)
Could anyone help?
Thanks

Hola
is possible that are you using a BINS agrupation into the Column Formula?
if you form a CASE statement using a Bins agrupation, in the column Formula, this must be disabled to match statements between columns and DB Prompt
if you are using a BINS agrupation to form the CASE statement, you have to delete the bins agrupation in the Column but keep the CASE statement
Regards

Pass prompt value by open doc to Web intelligence Report in BI Mobile

Hi Experts,
I need to convert this open doc formule for BI Mobile :
Open Doc for Launchpad ==> it's Ok in production
="<a href=\"http://BI4SERVER:8080/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AV5V9Gajm8pEthc0fowTIP8&sIDType=CUID&sType=wid&sRefresh=Y&lsSZSJOBID=Lien%20Mission&lsIZSJOBID="+EncodageURL(""+[Query 1].[Job Retain id].[Job Retain id - Key])+"\" title=\"\" target=\"_blank\" nav=\"doc\">Lien Mission</a>"
Open Doc for BI Mobile ==> it's ok wthout passing value
<a href="sapbi://OpenDoc/?authType=secSAPR3&default=yes&connection_name=pwc&server_url=fremesap820.cmis.corp.fr.ema.pwcinternal.com:8080&ConnectionType=BOEConnection&cms=BI4SERVER:6400&type=webi&iDocID=AV5V9Gajm8pEthc0fowTIP8&reportPageNumber=0" title="" target="_blank" nav="web">BIMOBILE</a>
I have a problem with passing value in prompt ??
How can write the red expression for web mode to work for BI MOBILE ??
Thanks & best regards
ELYAE BI

Any help please or idea or Note SAP ?
I have a problem with passing value in prompt with webintelligence document using BEX Query ?
Thanks and best regards
ELYAEBI

Error while passing prompt value in Column Formula

Hi All,
I have created a dashboard and added a dashboard prompt on that with a presentation variable named "promptdyn" that is basically showing bank names.
Now i want to calculate the market value based on this prompt selection, so i edited the column formula as
"WM FACT Sec"."MARKET VALUE" * EVALUATE('getBankBaseCurrencyValue(%2)' As Double,@{promptdyn},"Industry Type".INSTRUMENT_CCY)
But it is throwing this error:
\nQSError: 10058] A general error has occurred.
\nQSError: 22051] The argument number 1 is not referenced in this evaluate expression: getBankBaseCurrencyValue(%2). (HY000)
SQL Issued: SELECT "Industry Type".INDUSTRY_NAME, "Industry Type".INDUSTRY_TYPE, "WM FACT Sec"."MARKET VALUE" * EVALUATE('getBankBaseCurrencyValue(%2)' As Double,0,"Industry Type".INSTRUMENT_CCY) FROM WMAdHocReportingBMMSec
I don't know what is wrong here.Here i tried to pass the value of the prompt to the function.
Basically I have created a function in the database with two parameter as "bank name " and "Currency" and calling it with the help of evaluate function.
How could we store the prompt value and pass it to some other function?
Pls help me as it is urgent for me to solve.
Thanks

He Solved.
Just i missed out to write %1,%2 in the evaluate function.
But one thing i need to know that how can we store the value that is selected in a prompt say in dashboard prompt so that it can be used in query. Because i need to select a value first from the prompt and based on that i need to manipulate the values of the other request of the dashboard.
Please Reply.
Thanks

Opening Dashboard Page in New Window While Passing Prompt Values

Hi,
Currently it is not possible to open a dashboard page in a new window AND have the prompt values from a prior page pass to this page. I see one or the other can be accomplished but not both. Is there a way this can be acheived somehow or is there a workaround for this?

You are correct. The "Link or Image" object does not pass the dashboard prompt values, though it allows the destination dashboard to be opened up in a window.
Here is a workaround.
1) Place the link in a "Guided Nav. Link" object and set the destination dashboard and desired report. With the prompt set up correctly (i.e., dashboard scope, set to PV, destination report column filtered to receive the PV), the destination report will be filtered on the prompt as desired.
2) I noticed (and maybe this is why you wish the "new window"), there is no "return" link on the destination report. To fix this, in the destination dashboard, add a Text object to the dashboard. In the properties, paste the code below and make sure to check off "Contains HTML markup." This will produce a "Return" button on the dashboard.
<input type="button" value="Return" onclick="history.back();">
Now, when the user selects the prompt and clicks on the link, the prompt is passed to your second dashboard. When the user wishes to return, he/she can click on the "Return" button and return to the primary dashboard.
HTH,

Linking reports passing prompt values to detail report ?

Hi,
I am building a linked report in webintelligence on SAP universe which has prompts coming from BI variables.In the master report i have created a hyperlink column so that if user can select the hyperlink for each row.now if i select the hyperlink it should take me to the detail report by passing the prompt values.i want to pass the values to the prompts build in BI varaible.
eg: master report
Country Product Rev City
now here i want to select city and open the detail report by passing city values. i need the formula for the hyperlink city. City is just a prompt in master report it is not object in my report.
Thanks,

Hi Try this code
="<a href='http://l1280:8080/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?&sDocName=Account&sType=wid&iDocID=5311&lsSAccountType="+[Account Type]+"'>"+[Account Type]+"</a>"
Regards
Prashant

Help with passing integer value in A.S.S

I get an NSinternal script error while trying to pass this value can anyone help?
Also I wonder if it is possible to pass the value to a matrix
on clicked theObject
tell button "checkbox" of window 1
if integer value = 1 then
set button "checkbox2" of window 1 to integer value = 1
else
set integer value to 0
end if
end tell
end clicked
I also tried:
if state of button "checkbox" of window1 is 1 then
set the state of button "checkbox2" of window1 to 1
end if
Message was edited by: Doug Bassett

I've been following this thread and trying to figure out how to make this work. I was getting inconsistent results or errors with most of the code that has been posted. But I finally got it working... at least on a Leopard machine (not sure if this could have changed between Tiger and Leopard so your mileage may vary).
What I found was that a checkbox button that's located directly in a window seems to have a state that's equal to 0 when it's unchecked and 1 when it's checked. But a checkbox cell that's contained within a matrix seems to have a state that's set to either _off state_ or _on state_. Trying to set a cell's state to 0 or 1 simply wasn't working right for me. So I get the state of the "selectall" checkbox button (which is a 0/1) and transform it to either "off state" or "on state" before setting the states of the checkbox cells in the matrix.
Here's my code:
on clicked theObject
set n to name of theObject
if n = "selectall" then
set s to state of theObject
log "state: " & s
if s = 0 then
set newState to off state
else
set newState to on state
end if
repeat with i from 1 to count of cells of matrix "directories" of window "main"
tell cell i of matrix "directories" of window "main"
set state to newState
end tell
end repeat
return
end if
if n = "logStatesBtn" then
logStates()
return
end if
end clicked
on logStates()
log "Logging states:"
set s to state of button "selectall" of window "main"
log "selectall checkbox: " & s
repeat with i from 1 to count of cells of matrix "directories" of window "main"
tell cell i of matrix "directories" of window "main"
set s to state
end tell
log "Cell " & i & ": " & s
end repeat
end logStates
Note the "logStates" handler is just something I connected up to a "logStatesBtn" button in my window that lets me spit out the states of all the checkboxes into the console log. This is how I actually discovered that the cells were set to "off state" or "on state".
Steve

Passing prompt value to a LiveOffice document

Hi all,
I've SAP BW Query as the data source having two prompts of one which is date, and I built a LiveOffice document connecting a WebI report. The prompt values in LiveOffice document are displayed as for ex : comp code : 2000 [0COMPCODE].[2000] and date as 10/0320 [0CALMONTH].[032010]. In case of Comp code I'm passing only 2000 removing the rest of the text and it works fine, but whereas when I modified date prompt in LO document like Comp code its throwing an error while refreshing.
Getdocument Information Exception (Error WIS : 10901). In details I can see that date is being passed 32010 instead of 032010 even though I tried to change the format of that particular cell.
Any solution to this problem ?
Thanks

Hi Fred,
The date format in BEX Query is mmyyyy and I'm trying to pass the same in LO but its going as myyyy, for ex : 032010 is passed as 32010.

Saving Dashboard with a prompt value

Hi ,
I have created a dashboard with dashboard prompt having value as 1,2,3,4,5 . I want to save the dashboard with value 1 with name dashboard value1 , then with value 2 with name dashboard value2 and so on . Please suggest , if this is possible .

Hi,
Using Saved customization we can.
Select prompt value 1 and apply, then add saved customization
Page option -> Save current customization as 1
like wise create saved customization for all 5 values.
when ever u want to apply saved customized values page options -> apply saved customization ex: 1
http://santoshbidw.wordpress.com/2012/03/30/obiee11g-save-current-customization
correct me if am wrong..
Thanks........

Pass prompt values in a Webservice

Hi there, my requirement is to get 'Input Values' from a Combo Box(Dropdown) and pass those values into the webservice and get the output.
Here are the steps so far:
1) Created a WebI Report(using WebI Rich Client). The report has a prompt called 'State'
2) Published the report block as a web-service and copied the WSDL URL.
3) Created a Combo-box(Dropdown) in Xcelsius and put 'State' values to output to a cell 'A1'
4) Created a web-service connection in Xcelsius Data Manager, and used my WSDL URL. I am able to see that it has detected a prompt in my webservice in the Inputs area. There are two methods called:
valueofPrompt
and
Index
I am mapping the 'ValueofPrompt' to the same cell as the Combo-box output cell 'A1'
5) Clicked preview and when i picked any state say 'Alabama' and hit refresh, i see that i get values for all states, not just Alabama. So looks like my dropdown value is not being passed to the webservice.
Am i missing something? Any ideas where it might go wrong?
Thanks,
Kon

Are you sure that the webi report is refreshing AND you're refreshing the connection? Try putting FALSE or 0 in the option 'GetLatestInstance' and TRUE in the refresh option.
Try putting a loading status into a cell in the dashboard and mapping a spreadsheet component to this cell, so you can see what's going on. By seeing how long the connection is taking to load, you might be able to get an idea of whether or not the webi report is being refreshed.
Lastly, have you considered fetching all states in the Webi report and instead using a filter to pick an individual state. This will be much faster.

Passing prompt value from one report to other using navigation

I have one dashboard with one prompt (Prompt Name: Date) and a report with date column. This date in the prompt defaults to current date by using server variable ‘CURRENT_DATE’. When a user executes this dashboard the report will be executed for current date. Now I configured navigation on a column (MTD) that will take the user to another report. My Requirement is I have to filter the second report with a condition ‘Date<current date’. In the second report I applied a filter Date<valueof(CURRENT_DATE). To my surprise when I navigate from the first report to second report this filter condition Date<valueof(CURRENT_DATE) is replaced by Date=valueof(CURRENT_DATE). I did not under stand why navigating from the first report replacing the filter condition on the second report. If this is the expected functionality, what is the workaround for this?
To summarise my user want to see current date data in the first report and all the data less than current date in the second report. I tried with presentation variables. same thing happening with them as well.
Please let me know if there is any solution for this
Venkat

I mean to say,
fro second report apply filter not as global filters
To apply as inner fitlers...
Go to measures fx in answers
select the code in fx and click on filters options
and select the date from left pane (selection pane)
and write CURRENT_DATE by Converting this filter to SQL (the option is something like this)
see in this way ..
i didn't get time to work on your issue...
So please try this and report back..
Thanks & Regards
Kishore Guggilla

OpenDocument issue with blank prompt values

We have implemented optional prompts in XI R2 by joining our prompt objects with an 'Empty' object. When we create openDocument hyperlinks to these reports, passing nothing for the prompt objects worked just fine and the target report did not prompt for any values for these prompts, e.g. if there was a prompt on the report called Country and it was joined with an Empty ("") universe object via an AND, setting the Country prompt in the openDocument as lsSCountry= worked just fine.
In XI 3.1, when these hyperlinks are accessed from the master reports via InfoView, the target report is prompting for all prompts that accept empty (blank) inputs. If the resulting hyperlink shortcut is copied and pasted directly in the browser URL, everything works fine, i.e. target report does not prompt for any of the empty values and the report is displayed correctly.
We even tried using the 'no_value' option for these prompts in the openDocument but since these are universe based prompts that can't be defined as optional, no_value is not allowed.
Anybody facing similar behavior?
Thanks.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly

Passing prompt value to column header

Hi experts
I'd like to change the column header dynamically.
the report is using presentation variable so it's displayed after the user had selected a value in the dashboard prompt and clicked on go.
I'd like to have in the column header the value that the user had selected in the dashboard prompt.
Is there anyway to do that??
Regards

Hi,
Yes. you can do that by creating presentation variable.
What you have to do is , create the presentation variable like LOCATION_NBR in the prompt, like this you can create as many as you want to display it in the header.
The next step is to display the value the user selects in the prompt that should display in the header, for that , you can create narative and like the following things and achieve it.
<table>
<tr>
<td bgcolot ="#00080" width="1500" height="25" align="center">
The location No is @{LOCATION_NBR}
</td>
</tr>
</table>
Since we define the presentation variable in Prompt and use it narative view we able to display the header based on the customer choose it from prompt
I hope the above explanation will resolve your requirement
Regards
Raj

Problem with passing table values to RFC

Hi all,
I am passing values in table in RFC. There are no import/export parameters in RFC. We are passing only tables.
There are two tables in the RFC I_Dept and I_Subdept. Initially RFC is executed for getting the Dept which works fine as for this there is no need to set in input table value. But to get sub department I need to set the dept in I_Dept and after executing RFC I should get values in table I_Subdept. The code is as below:
wdContext.nodeOutput_I_Dept().invalidate();
wdContext.nodeOutput_I_Subdept().invalidate();
Z_Bapi_Dept_Values_Input d_Input = new Z_Bapi_Dept_Values_Input();
wdContext.nodeZ_Bapi_Dept_Values_Input().bind(d_Input);
Zdept dept = new Zdept();
dept.setZname("Sales");
d_Input.addI_Dept(dept);
try
wdContext.nodeZ_Bapi_Dept_Values_Input().currentZ_Bapi_Dept_Values_InputElement().modelObject().execute();
wdContext.nodeZ_Bapi_Dept_Values_Input().nodeOutput().invalidate();
catch (WDDynamicRFCExecuteException e)
msgManager.reportException(e.toString(), true);
Is anything wrong in this code because even after executing the RFC the size of node I_Subdept() is zero. But the RFC works fine in the backend.
Regards,
Jaydeep

A typical misunderstanding when populating structured input data
via code is the following:
- You have bound a WD context node hierarchy to the model say
N1         >         M1
->N2       >         ->M2
                                                                                where N1, N2 are WD Context nodes (N2 is child of N1) and M1, M2 are
model classes bound to the context nodes. Important: M1 has a relation
to M2 on the model side, means there is some method M1.setMyM2(M2)
(assuming the target role of the relation is called "MyM2").
- You create context elements for N1 and N2 which are bound to a model
class instances of M1 and M2 respectively.
Assuming that M1 is the "executable" model class (*_Input) and M2
represents an input structure needed, the M2-input will - using the
above approach - not be available on execution. Why? The relation on the
model side (MyM2) is not available if just maintaining it via the
context, i.e. context and model are not "in sync". As RFC execution is
done via the model the M2 input will not be available.
You best create complex/nested input structures on the model
side and then bind the top-level model object to the resp context node.
In the above sample this would be:
M1 m1ModelObject = new M1();
M2 m2ModelObject = new M2();
m1ModelObject.setMyM2(m2ModelObject);
Hope it helps!
Regards,
Sangeeta

Pass Prompt values into Legend / '-ALL-' filter filters out all records

Hi
I have 2 questions for the same chart so I hope it's OK to add them in one post.
Firstly I have created a chart & added three Select List filters which work fine, the query is below, problem is that when I change back to '-ALL-' I get no data, it has filtered out all records as no data matches the value of '-ALL-' does anyone know the code to get around this?
My chart query;
select null link, P_MONTH AS MONTH, SUM(CALLS) AS data
from DATA.MAIN_DATA
WHERE WAREHOUSE = :P1_WAREHOUSE
AND ANS_UNANS = :P1_ANS_UNANS
AND PRODUCT = :P1_PRODUCT
GROUP BY P_MONTH
As I will have several queries like the one above for different options on the same chart, I would like the Legend to show what the user has chosen each time the options are changed ie;
Something like the bolded text in the query to display the chosen values in the legend;
select null link, P_MONTH AS MONTH, SUM(CALLS) AS 'P1_WAREHOUSE' || 'P1_ANS_UNANS' || 'P1_PRODUCT'
from DATA.MAIN_DATA
WHERE WAREHOUSE = :P1_WAREHOUSE
AND ANS_UNANS = :P1_ANS_UNANS
AND PRODUCT = :P1_PRODUCT
GROUP BY P_MONTH
Any ideas/suggests?

Thanks Andy
I'm having some problems with applying this so it may be best if I show you how I've applied this code.
Here's an example of my data on a made up 'EMP' table;
ENAME     SAL     DEPTNO     DEPARTMENT
SMITH1     1871     345     DEPT1
SMITH2     1953     345     DEPT2
SMITH3     2239     345     DEPT3
SMITH4     492     345     DEPT4
SMITH5     2431     345     DEPT5
SMITH6     2331     345     DEPT6
SMITH7     1003     369     DEPT7
SMITH8     1688     370     DEPT8
SMITH9     2284     371     DEPT9
So I'm only using one table - 'EMP'
I've created 2 LOVs, 'DEPTNO' & 'DNAME'.
'DEPTNO' LOV has the values for the 'DEPTNO' field in the table.
'DNAME' LOV has the values for the 'DEPARTMENT' field in the table.
I then created a chart with the below SQL query as its source;
SELECT NULL LINK,ENAME LABEL,SAL VALUE
FROM EMP
WHERE (DEPTNO = :P1_DEPTNO OR :P1_DEPTNO = 0)
ORDER BY ENAME
The 'Chart Title' field under the 'Chart Attributes' tab has the below added;
Department - &P1_DNAME.
The COMPUTATION is as below;
SLECT NVL(DEPARTMENT, '-ALL-')
FROM EMP
WHERE DEPTNO = :P1_DEPTNO
Could you advise where I may be going wrong as I have the following errors;
1. The chart is working OK with the added '(DEPTNO = :P1_DEPTNO OR :P1_DEPTNO = 0)' clause - but I still get no results for '-ALL-'
2. I can't get the chart to display the current value in the legend - where exactly should I put this line - 'Department - &P1_DNAME.'
3. The Computation is stopping any data from showing in the chart

OPendoc in BOXIR3 with Passing prompt values

Similar Messages

Maybe you are looking for