OpenDocument issue with blank prompt values

We have implemented optional prompts in XI R2 by joining our prompt objects with an 'Empty' object. When we create openDocument hyperlinks to these reports, passing nothing for the prompt objects worked just fine and the target report did not prompt for any values for these prompts, e.g. if there was a prompt on the report called Country and it was joined with an Empty ("") universe object via an AND, setting the Country prompt in the openDocument as lsSCountry= worked just fine.
In XI 3.1, when these hyperlinks are accessed from the master reports via InfoView, the target report is prompting for all prompts that accept empty (blank) inputs. If the resulting hyperlink shortcut is copied and pasted directly in the browser URL, everything works fine, i.e. target report does not prompt for any of the empty values and the report is displayed correctly.
We even tried using the 'no_value' option for these prompts in the openDocument but since these are universe based prompts that can't be defined as optional, no_value is not allowed.
Anybody facing similar behavior?
Thanks.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly

Similar Messages

Issue with blank screen HP G60-447CL Notebook PC

Issue with blank screen HP G60-447CL Notebook PC, I purchased warranty and have had the laptop serviced before for the same exact issue. Same problem has come up again blank screen it has been less than five months this problem was fixed and it has started again: blank screen white, laptop is powered on nothing else happens. Now I cannot reach anyone.

You're very welcome.
I have tried many times to help folks with different drivers and nothing has worked.
I'd say at least a dozen people have posted about this issue, and no one can fix it.
I don't understand it either.

Issue with Dashboard Prompt passing value to Presentation Variable

I have 2 tabular reports that grab 2 variables respectively: @Month and @Year.
The reports work fine.
My issues is that to compute the most recent month & year, so I can pass the values to the 2 variables mentioned above, I have a dashboard prompt on the same page as the 2 reports. In the dashboard prompts (Edit Box types), I have SQL in the "Default" that computes the most recent month & year. This logic also works perfectly when you preview the results of the prompt.
My issue is that when I land on the page, it seems that the month & year prompts are not computing. I have an old value of "Dec" "2009" instead of "May" "2010".
It seems the Default SQL logic is NOT running on its own? As an aside, we do our development in a test environment and the catalog is promoted to production nightly. The "Dec" and "2009" I see is the correct value for the test environment, so it looks as if the defaul values are just being migrated with the catalog, but then the SQL to compute the latest values of the 2 propmts are never executing when the user lands on the page? Thus everyone sees Dec 2009 data instead of May 2010...Help!

Hi,
dgerena wrote:
My issues is that to compute the most recent month & year, so I can pass the values to the 2 variables mentioned above, I have a dashboard prompt on the same page as the 2 reports. In the dashboard prompts (Edit Box types), I have SQL in the "Default" that computes the most recent month & year. This logic also works perfectly when you preview the results of the prompt.You are creating the second prompt (edit box) to make the first prompt values, You can use the same sql in the report default to SQL in the first prompt itself.
If I am wrong please clarify.
Thanks,
Vino

Issue with optional prompt

Hello,
We have a universe built on top of bex query and it has a couple optional prompts prebuilt with the help of variables in the bex query. My understanding is that when there is optional prompt the lov is not generated unless the user manully clicks the refresh lov button on prompt window. This is how it works in the webi report I built on the universe. But when I use the same webi report as a live office component in the xcelsisus dashboard the lov's are genrated ignoring the <optional> prompt which is causing lot of delay refreshing the dashboard. This happens only when I have the connection in the universe to use SNC( Single sign On). I dont see any issue with hardcoded username and password.
any thoughts?
Thanks
Ram

Ingo
>> What exactly you mean here that a list of values is being generated ? a list of values doesn't show up automatically in Xcelsius for the dashboard - it needs to be created / designed as part of the Xcelsius design.
When I have a prompt with <optional> tag in the universe the webi report or xcelsius should not request the new lov's from the database it should only use the lov's available in chache.
But I my case I am using SSO connection in the universe, when the SSO is turned ON the lov's from chache cann't be used, the webi report is not requesting a lov's from the database when there is no chache or when the chache off which is correct. but the live office plugin iin xcelsius s requesting new lov's from database everytime I refresh a connection.
In xcelsius we are not using any list of values, I don't think lov's are usefull in xcelsius dashboard as we can't see the prompt window in the flash mode.
Thanks
Ram

Issue with Sales office values in BI

Hi Team,
We have a issue with the sales office values in a BI report.
The report displays 7 sales office values for the division 01. Where as in ECC, we have only 6 sales office values exists for the same division 01.
These sales office 7 has been have been loaded on april n may months.
The master data has all the sales office values 01- 10.
Those sales office values are coming from the Infocubes, 'Billing Document Condition' & 'Open Orders'.
I have the checked the Multiprovider, Infocubes and the InfoObject and values exists.
How to proceed further and correct these values?
Appreciate your expert guidance...
Thanks
Regards
Santhosh Kumar N

Hi Krishna,
Thanks for the reply. The Sales office field is directly mapped in the transformation and does not have any routine. Its the Key field.
The Billing Document Condition infocube is being feed by the DSO '2LIS_13_VDKON - Billing Document Condn' and datasource is '2LIS_13_VDKON'.
The Open Orders infocube is being feed by the DSO Document Order item / Delivery; below which we have another 3 DSO.
1st DSO has the Datasource '2LIS_13_VDITM'
2nd DSO has the Datasource '2LIS_11_VAITM'
3rd DSO has the Datasource '2LIS_11_V_SSL'
The Sales Office 7 has txn records for the month of April & May.
The report built on top of a Multiprovider and the for the months June and July, we have txn records fine for the sales office 01 - 06.
Please help me, if i am missing anything here and make me to understand better.

Saving Dashboard with a prompt value

Hi ,
I have created a dashboard with dashboard prompt having value as 1,2,3,4,5 . I want to save the dashboard with value 1 with name dashboard value1 , then with value 2 with name dashboard value2 and so on . Please suggest , if this is possible .

Hi,
Using Saved customization we can.
Select prompt value 1 and apply, then add saved customization
Page option -> Save current customization as 1
like wise create saved customization for all 5 values.
when ever u want to apply saved customized values page options -> apply saved customization ex: 1
http://santoshbidw.wordpress.com/2012/03/30/obiee11g-save-current-customization
correct me if am wrong..
Thanks........

Issue with Blank Value selection in Dropdown List

Hello Experts,
                    I am facing one strange issue in Adobe Forms Drop Down(DD) list. Foll. is the list data which contains a several item data & blank value. After item data selection user must be able to select blank value in case he doesn't want to set the value to Order Unit as shown in screen shot below.
                              Now my issue is after any of the item values selection (for ex. BAG - BAG) user is not able to set the blank value again at my client system. However its working fine in mine. When checked client is using Adobe Reader 8.0 which is same as mine.
Thanks in advance.
Regards,
Amit

Hi Steve,
               Thanks for the reply. We have a blank value in the DD as a list item, where key & description is empty space. As i posted above user must be able to select that blank item if doesn't want any value for Order Unit. This selection is working fine in my sytem, but my client facing the issue where he can not select the blank value from DD.
Thanks,
Amit

OBIEE Issue with Hierarchy Prompt

Hi,
I am using a Hierarchy Prompt to select a member from a Hierarchy column whose members come from a essbase cube.
I set a presentation variable *"Select_Cliente"* to the prompt and set the filter to a column like "Gen3,Cliente - Default is equal to / is in *@{Select_Cliente}*"
The issue occurs when someone enter to the dashboard and select a member in the Hierarchy Prompt and clicks in "Apply". The Analysis shows the following error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 96002] Essbase Error: The identifier '<saw:dimensionSelection xmlns:saw=""com.siebel.analytics.web/report/v1.1"" xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance""><saw:selectionStep stepID=""1"" type=""startWith"" category=""member""><saw:stepMembers xsi:type=""saw:staticMemberGroupDef""><saw:staticMemberGroup><saw:hierarchyMembers><saw:hierarchyLevelMembers><saw:hierarchyLevel levelName=""Gen2,Centro de Costo"" levelID=""Gen2,Centro de Costo""/><saw:members xsi:type=""saw:stringMembers""><saw:value> GERENCIA DIV. COMERCIAL* </saw:value></' on line exceeds maximum character limit (HY000).
The problem is that the selected member is filter with a lot of caracters that not apply. The selected member is underlined.
The version of the OBIEE is 11.1.1.6.9.
Thanks for the help.
Edited by: cpmacgre on 08-abr-2013 14:14

Switch the filter in the criteria part of the target report into Advanced SQL Filter, then type your filter with that kind of syntax : "Period"."Period - Default" = '@{var_per}{P3}' and it should work
P.S. if you want to have multiple elements in the prompt selection, then use instead this syntax : "Period"."Period - Default" IN (@{var_per}['@']{'P3'})
Edited by: pmerle on May 3, 2013 5:38 AM

Authorization Issue with Custom Pending Value Object and Anonymous Users

Hi,
I am just converting my demo from version 7.1 to 7.2. I am not doing upgrade. The demo uses a custom pending value object USER_REQUEST. The idea is that new employee goes to Java AS as anonymous user and enters her details and store where she will work. After submitting request there is an approval process using custom entry type USER_REQUEST. If the request is approved then IdM converts USER_REQUEST into MX_PERSON entry. This works nice in 7.1 but I am having problems with replicating this in 7.2. I created new UI task accessible by anonymous that creates new USER_REQUEST entry. I also assigned role idm.anonymous with UME action idm_anonymous to UME built in group Anonymous users.
My problem is with the field STORE. This field is a reference field to another custom entry type STORE (this entry type will be used in context based assignment). Every new employee must selects a store where she will work. The problem is when user clicks on button "Select". Web dynpro terminates and returns authorization error. I also tested this with entry type MX_ROLE. I added attribute MXREF_MX_ROLE and same issue. So it seems that just assigning UME action idm_anonymous is not enough to list objects from identity store. I found a workaround for this issue. When I assign also UME action idm_authenticated to Anonymous users then it does not dump and I get a pop up window where I can search for store. It does not seem right to assign idm_authenticated to anonymous users.
Another issue is with display task for entry type USER_REQUEST. I assigned a display task to entry STORE and I set that Anonymous have access to this task in Access control tab. I assigned default value to the field store. So when a user opens page she can see a hyper link to display already assigned store. When user clicks on this hyper link it opens a new pop up window and user must authenticate against Java AS. After successful authentication the display task for entry STORE is displayed. I would assume that anonymous user can display it without authentication.
So to me it seems like authorization checks have been changed in 7.2 versions and are more strict for anonymous tasks. Hence my question is how can I implement my scenario. Am I missing some configuration or what's the proper solution to my two issues? I don't count assigning idm_authenticated to Anonymous users as a solution. This workaround does not solve my second issue.
Thanks

Some of the folks from Trondheim labs check, but rather infrequently. There's another person who I guess is in consulting that also checks from time to time.
Sorry I can't help you with your main question...
Matt

Performance Issue with Selection Screen Values

Hi,
I am facing a performance issue(seems like a performance issue ) in my project.
I have a query with some RKFs and sales area in filters (single value variable which is optional).
Query is by default restricted by current month.
The Cube on which the query operates has around 400,000 records for a month.
The Cube gets loaded every three hours
When I run the query with no filters I get the output within 10~15 secs.
The issue I am facing is that, when I enter a sales area in my selection screen the query gets stuck in the data selection step. In fact we are facing the same problem if we use one or two other characteristics in our selection screen
We have aggregates/indexes etc on our cube.
Has any one faced a similar situation?
Does any one have any comments on this ?
Your help will be appreciated. Thanks

Hi A R,
Goto RSRT--> Give ur query anme --> Execute =Debug
--> No a pop up ill come with many check boxes select "Display Aggregates found" option --> now give ur
selections in variable screen > first it will give the already existing aggregate names> continue> now after displaying all the aggregates it will display the list of objects realted to cube wise> try to copy these objects into notepad> again go with ur drill downs now u'll get the already existing aggregates for this drill down-> it will display the list of objects> copy them to notepad> now sort all the objects related to one cube by deleting duplicate objects in the note pad>goto that Infocube> context>maintain aggregates> create aggregate on the objects u copied into note pad.
now try to execyte the report... it should work properly with out delays for those selections.
I hope it helps you...
Regards,
Ramki.

Issue with Calendar prompt presentation variable

Requirement: (OBIEE 11g)
A dashboard should have two prompts - one calendar prompt and one text field prompt giving number of days. There is a timestamp column (SHIP DATE) in the analysis. There should be a between limit in this timestamp field. Logic to be implemented is - Calendar Prompt DateTime <= SHIP DATE < (Calendar Prompt DateTime + No. of days from text field).
Solution Tried:-
Using the dashboard prompt, two prompts and two corresponding presentation variables were created. First presentation variable is for calendar prompt timestamp (Date1) and other one is for no. of days (Num_Days) text field prompt.
Then in the analysis, two filters were created on the Ship Date. First filter is set as 'Is Prompted' and it takes the values '<=' from calendar prompt in dashboard.
For the other filter, I converted it to SQL and wrote the following:-
"Time"."Ship date" <= (timestamp '@{variables.Date1}['YYYY-mm-DD HH:MM:SS']{2013-01-01 00:00:00}') + @{variables.Num_Days}{30}
The analysis runs fine for the above filters, but when run from the dashboard, it throws up an error.
Error getting drill information: SELECT "Time"."SHIP DATE" saw_0, "Base Facts"."QUANTITY" saw_1 FROM "SHIPPING DATA" WHERE ("Time"."SHIP DATE" <= (timestamp '''2013-00-01 00:10:SS''') + 30) AND ("Time"."SHIP DATE" >= timestamp '2013-10-01 00:00:00').
From the above it seems that error is coming because I am unable to set properly the calendar prompt presentation variable in a format which can be read by the analysis. Since analysis is running fine from the default value of Date1, I was thinking of somehow converting the calendar prompt presentation variable in the similar prompt.
Any pointers to the correct approach?
Thanks
Kundan

I found a workaround to my above issue for now but I would like to know the proper approach from experienced folks.
My workaround is as follows:-
I created an additional column in the analysis -> TIMESTAMPADD(SQL_TSI_DAY,- @{variables.Num_Days}{30}, "Time"."Ship date"). Then I applied a filter on this new field. The filter is set as < variable expression Date1 (coming from presentation variable). Since I am not converting this filter to SQL, OBIEE server seems to be taking care of timestamp format conversion.
I think I need to study the logs and the config XMLs to see how date format is being stored to get a better solution.
Regards
Kundan

Netra T1 105, issue with LOM prompt

Hello all,
I am having issue in accessing OK prompt from LOM menu. When I do the poweron, it sits on LOM event: power on. When I do, console it shows stand by. Please help me out here as I am working on making this server to respond. Thanks.

Hi. Could you tell me if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105?
*How to determine if the Netra[TM]T1 model 105 server PROM patches are current [ID 1010561.1]*
Description
How to determine if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105.
Steps to Follow
These two patches have to do with OBP(OpenBoot PROM) and the user prom.
108620-04 Hardware/PROM: Netra t1 Standalone User PROM Update
108673-02 Hardware/PROM: Netra t1 System PROM Update
108673-02 delivers OBP 3.10.27.
This can be checked via the OBP with the .version command.
OBP Example:
ok .version
Release 3.10.27 ME created 2000/06/22 16:45
OBP 3.10.27 2000/06/22 16:45
POST 1.17.0 2000/03/06 12:18
This can be checked via Solaris[TM] with: prtconf -V
Solaris[TM] Example:
# prtconf -V
OBP 3.10.27 2000/06/22 16:45
If you see Release 3.10.27 you do not need to install this patch.
108620-04 delivers the dropins
These can be checked at the ok prompt with the show-dropins command.
Example:
ok show-dropins
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,0
Dropin name Size Checksum Date Date Version Vendor
created flashed
OBP 4a1bc cc30 06/22/2000 3.10.27
keyboards bf0 dd75
fonts af6 6b86
obdiag bd34 aec5
pci1002,5654 d34 7190
pci1002,4755 cb0 c382
pci1002,4750 1794 3f65
class060400 44e 17cc
userprom 246 b3ba
pci108e,1001 32a4 d714
pci1011,22 47e 69c9
pci1000,3 2824 feb4
class010100 1210 ce35
i2c 1fe 5a8f
i2c-cs2 1f4 bd2a
nvinit- 172 0 10/08/1999 00/00/0 0.0
POST 45340 519 03/06/2000 1.17.0
PROM size = 100000 bytes Available for Use = 3d958 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,400000
Dropin name Size Checksum Date Date Version Vendor
created flashed
ebus-14.400000 b0 9fa6 06/09/1999 06/09/1999 1.0
SUNW,flapjack
probe+ 250 c2b5 01/06/2000 01/06/2000 2.0
SUNW,flapjack
banner- 1aa 6f35 12/10/1999 12/10/1999 1.0
SUNW,flapjack
tty-control 150 a863 12/01/1999 12/01/1999 1.0
SUNW,Flapjack
PROM size = 200000 bytes Available for Use = 1ff984 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,800000
Dropin name Size Checksum Date Date Version Vendor
created flashed
PROM size = 200000 bytes Available for Use = 200000 bytes
ok
The part that is of interest is about two thirds of the way down to do
with ebus-14.400000, probe+, banner- and tty-control.
If the Checksum matches you you don't need to install this patch.
On the other hand it won't cause any problems to reinstall both patches.

BPC75NW - Periodic Amount Not Calculating for records with blank YTD value

We are on BPC75NW SP6 and have a YTD consolidation application. Data is loaded on a monthly basis uising a process of importing data files from supplying systems and then loading them into BPC using the data manager append function with a transformation file. YTD amounts are as expected and 'most' periodic amounts are also calculated correctly via MDX mesures in reporting. However, in situations where we have a P&L YTD balance in one month (say January) and then in the next month (February) there is no longer a YTD balance in that P&L account, no record is loaded for February YTD and the system is not calculating any February periodic amount. Example:
January - Load $100 to a P&L Account which is the YTD amount
The January YTD amount = $100.
The January Periodic amount = $100.
February - Load no record to the same P&L account as above (as the YTD amount is now 0)
The February YTD amount in the system is blank
The February Periodic amount in the system is blank (This should be a NEGATIVE $100)
As a possible work around we have also tried to load a 0 to February. The data manager package shows the record as loaded successfully but since it is a 0 it really does not put it into the database.
Surely someone out there has already hit this situation and is willing to share the solution.
Thank you,
Vicki S.

This problem was resolved by installing SAP Note 1405993 - MDX: Error: Invalid MDX command with
CURRENTMEMBER. The current text on the note does not describe our error but SAP will not extend the text to cover this issue.
Prior to installing this note, the following other notes were also installed but they did not fix the periodic calculation issue. Under SAP's advisement we are going to leave them however as 'they should not have any side effects':
1529720 MDX: No data for calculated member and metadata reference
1590976 MDX: Incorrect data for IIF
1584196 MDX: Calculated members and different dimensions
1528374 MDX: System error GET_PRPTY_VALUE-02-
I will now close this message.
Vicki Shrontz

New issue with blank frame at end of coverted .avi

Here is the project (scenario details):
I have 2 .swf files. Both are 30 fps. Call them "chapter1" and "chapter2". Frame count is 3600 and 9600 respectfully. The last frame of "chapter1" contains the same image as the first frame of "chapter2" - basically I'm splitting up an overall animation so I can easier manage two Flash documents versus one large document. I used SoThink SWF Converter to create 2 .avi files. When I place these .avi files back to back on the same timeline in Encore, both .avi files have an extra blank frame at the end. This causes a black frame flicker between the end of "chapter1" and the beginning of "chapter2". Even if I drag the end of the .avi on the timeline to the left (as to trim the video track), I still see a black, empty frame at the end. I don't think the problem is with SoThink because I've even imported these .avi files into Sony Vegas and zoomed in all the way to the end of each video track and the very last frame of both files is as it should be. This leads me to believe the issue is with Encore somewhere. Also, initially the problem in Encore was the audio tracks were extending a few frames beyond the video track thus causing the back to back .avi files to align according to the audio track (which was leaving a few blank frames from the video track). I have included some screen shots of the last 3 frames of "chapter1" and the first frame of "chapter2". Hopefully the images below appear in progression as I attached them. Watch the timeline indicator. One frame before the end of "chapter1" is black. I've run out of troubleshooting ideas. I can't imagine this would have anything to do with the .swf being 30 fps and the Encore timeline being DV NTSC 29.97 fps.

Stan - thanks for the reply...
I don't recall what was covered when you posted the similar question earlier:
Not much more than me explaining the flicker between 2 .avi files, and the only response was someone telling me to just have one .swf file. I'm not sure why some people's response is to "just do it a different way" instead of trying to figure out what is causing the issue.
What does mediainfo or gspot show about the avis?
I'm not sure which information you need, but I will attach what I was able to get out of the problematic .avi. Let me know if you need different information. This was the first time I used MediaInfo.
Without knowing what to look for, I did notice a couple of lines that caught my eye. Line 25 mentions 30 fps frame rate (which I imagine is this .avi). Line 26 mentions 25 fps as the original fps (which makes me wonder if SoThink misread the .swf file as 25 fps instead of 30 fps) - not sure if I'm reading this right. Also, lines 45 & 52 mention a 26ms delay in audio (relative to video). Could that be why the audio track in Encore extends a couple of frames beyond the video track? Either way, Vegas is STILL showing the last frame as filled with the image. What does this report tell you? Maybe I should find a different way to export .swf to video. Is there anything else out there I might try (to see if the problem is SoThink)? Just looked at the .avi in PremierePro. The last frame looks fine. SoThink won't let me convert .avi to 29.97 fps.
Could the fact I have a 30 fps .avi placed into a 29.97 fps project timeline, could this be the issue? I tested another .avi (from a movie), and the last frame appears correctly in Encore. Now this looks as if the issue is back to SoThink's conversion to 30 fps. I really should find a different .swf to video converter and retest. Again, thanks for any help (from anyone) in this and suggesting alternative video converters.
*added - the .swf files contain tweened and frame by frame animation along with a streamed audio layer, but even when I completely remove the audio layer, the resulting .avi still shows up as a blank frame at the end. I thought at one point the fact I had a streaming layer of audio might have been forcing the frames in Flash to skip around, but this wasn't the case.

Issue with subtracting two values

I am trying to subtract one value that is a calculated field in the form, Total Hrs
Potential Savings (the product of two fields in the document). Annual Leave
Hours is an entered field. I used the Simplified field notation option:
Total\ Hrs\ Potential\ Savings-Annual\ Leave\ Hours but it is not calculating. I tried with and without spaces around the minus sign. I don’t know anything about writing
java scripts. I am using Adobe Acrobat XI, version 11.0.2.
Thanks!

Yes. Wow, a lot. This is under the console drop down. The script drop down is blank. I don't know any thing about java scripts. This is my first attempt at using calculations in a form.
Acrobat EScript Built-in Functions Version 11.0
Acrobat SOAP 11.0
TypeError: getField("Hourlyrate#0xAnnualleavehours#0") is null
1:Field:Calculate
TypeError: getField("Hourlyrate#0xAnnualleavehours#0") is null
1:Field:Calculate
TypeError: getField("Hourlyrate#0xAnnualleavehours#0") is null
1:Field:Calculate
SyntaxError: missing ; before statement
1:Field:Calculate
SyntaxError: missing ; before statement
1:Field:Calculate
SyntaxError: missing ; before statement
1:Field:Calculate
TypeError: getField("Annual Leave Hour") is null
1:Field:Calculate
TypeError: getField("Total Hrs Potential Savings-Annual Leave Hours") is null
1:Field:Calculate
TypeError: getField("Total Hrs Potential Savings ") is null
1:Field:Calculate
TypeError: getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
SyntaxError: syntax error
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
SyntaxError: syntax error
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
SyntaxError: syntax error
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate
TypeError: this.getField("Total Hrs Potential Savings") is null
1:Field:Calculate

OpenDocument issue with blank prompt values

Similar Messages

Maybe you are looking for