Opening Balance at Actual Cost Method

Hi Guys
How are you ..every body
how can i enter Opening Balance for items at warehouse uses actual cost method that i need to enter the unit cost for each item not the qty balance only
thanks
best regrads
Amr Hussien

Hi
Costing has an API which can be used to enter any costs (Standard or Actual). Create the opening stock using create Immediate and then load the cost separtely using the API. Once you close the period that would become the period cost and valuations would be done accordingly. So even if you use Weighted Average it would be ok
Regards
Girish

Similar Messages

  • Opening Balances for Project Costing in R12

    Hi All,
    What are the Open transactions should be migrated as Opening Balance in Project Costing (R12) for Projects and Tasks. Here at client place cost will come from Inv, PO, AP and OTL to Project costing (R12). Can you please explain in detail (Opening Balances & Historical Cost - How to Migrate)?
    Waiting for replies...

    Hi
    Usually on implementation of Projects, people are migrating total historical costs per project.
    Depend on your current system, you may convert the historical data summarized by project, task, expenditure organization and expenditure type. There is an option to summarize costs into the latest period, just before starting the future transactions import into Projects. Otherwise, consider summarizing cost data per period, per quarter or per year.
    The summarized data may be loaded as miscellaneous expenditures into Projects.
    Be aware that for converted expenditures you should setup a Transaction Source which is costed and accounted.
    Dina

  • Unabsorbed balance after actual cost run

    Hi gurus
    I am facing problem in Production cost center there is unabsorbed balance after actual cost run
    kindly help me.

    Thanks all.
    I have solved it.

  • Cost Center Opening Balance-reg

    Whether, we can give opening balance for the cost centers/profit centers, in SAP B1 8.8

    Hi,
    Cost center/profit centers are additional information for management and they depend on journal entry. No where for you to input opening balance except Journal Entry with assigned cost center/profit center.
    Hope this helps,
    TVSon

  • Actual cost disappeared

    Hi all,
    Please if any one can help me,
    After entering the standard and actual cost for the items for the opening period and run the revaluation by test subsidiary ledger update request I found that the actual costs for this period are disappeared , by the way I entered the actual cost by copying the standard cost for the same period.
    Thanks
    Tamer

    If you are copying from a Standard Cost Method into an Actual cost method, then you should not run Actual cost Process for that period. Actual Cost Process will clear out the existing cost of all items (under that cost method) and try to recalculate the cost (both Raw Material and Finished Good) using the Actual Transactions in that period.
    Thanks,
    Dinesh

  • Opening Balances for GO live

    We wish to GO Live on a particular date. However the opening balance before that particular date are still under verification, but still we are having values of opening balances will be corrected say in next 20 to 25 days after the date of go live.
    Please suggest us suitable method of correcting the opening balances with out passing the Journal Entry.
    Please also let us konw once we correct / update the opening balances by the suitable method as suggested by you, What will be the effect on the subsequent entries / transactions which are already entered into the system after GO Live.
    thanks
    harish .

    AS per my understanding opening Balance can be uploaded later or the figure available be uploaded as Parcked, so that if there are any differences, that can be taken care of.
    Regards,
    Rajesh Banka

  • How to Calculate Opening balance

    Hi BW Gurus,
    How to calculate Opening balance for previous period using variables in Reports using debit and credit.
    Example:
    Opening balance is the balance for an account for the previous period. In other words, if the user is running a report for Period 1, 2006, the opening balance is actually the ending balance from Period 12, 2005 (December 31st, 2005).
    Thanks in advance
    DJ

    Hi Friend,
    If Your Prob is solve then tell me how to find perticular month balance amount.
    i m create cash book report for perticuler GL Account , i use BKPF + BSEG for this
    i found all entries,
    But at last i want to Opening Balance for perticuler date.
    like     01/05/2007 opening balance = 10000 as per tcode FS10N
    and in 26/05/2007 ??????
    how to find exact date opening balance is there any function for same
    or any procedure..
    Thanks
    From
    Gaurav

  • HOW TO CALCULATE OPENNING BALANCE

    HI Experts..
    How to calculate Opening balance for previous period using variables in Reports using debit and credit.
    Example:
    Opening balance is the balance for an account for the previous period. In other words, if the user is running a report for Period 1, 2006, the opening balance is actually the ending balance from Period 12, 2005 (December 31st, 2005).
    I am Using 0FIAR_O03 ODS ..
    Very Urgent Issue..
    If Possible Stp by Step..
    Cheers
    Purushottam
    09891683828
    [email protected]

    Hi Saloni,
    to get the debit and credit you would be using a variable 0I_FPER(Fiscal year / period), which is a user entry interval variable.
    now to get the opening balance you will have to create a customer exit valiable and the low value of 0I_FPER will have to popuplated by writied the code for the customer exit valiable. you will have to restrict the key figure DEB_CRE_LC for this customer exit variable with the operand as less than(< Fiscal Year /Period from 0I_FPER)).
    If the above was useful please assign reward points.
    Regards
    Venkata Devaraj

  • Opening balance of WBS elements

    Hi Gurus,
    At go live, how can we upload opening balances of WBS elements.
    Please revert asap.
    Thank You

    Get the open balance information from the users in an excelsheet for all the WBS.
    Use the following  transactions
    Costs -  KB15N ( used for open balance from materials cost)
    Revenue - KB41N
    Secondary costs - KB21N ( used for open balance from Time costs)
    You have to get dummy cost center for using this transactions for data migration.
    Srinivasan Desingh

  • R12: Cost Method in Inv Setup Org Params Costing Information

    Can someone confirm my suspicion that the Costing Method field in Inventory > Setup > Organization Parameters > Costing Information tab DOES NOT APPLY to OPM "process enabled" organizations?
    The actual costing method for OPM is determined by the Cost Type that is setup within OPM Financials and assigned to the OPM Cost Calendar.
    Just curious if the Costing Method field has any affect (good, bad, or ugly) whatsoever with the OPM setup...

    Yes, I'm pretty sure it has no meaning when you enable an org as process mfg. I can't get into conventional item costs when org is OPM enabled - it gives a message. The OPM costs are stored in another table to normal costs and it makes sense that you can't have an OPM and a discrete cost for the same item in the same org as only one cost can make it through to the GL.

  • Changing the GL Cost Method in the Fiscal Policy

    Hi all,
    I would like to know what will be the effects if I change the GL Cost Method in the Fiscal Policy. My client wants to go from PPAC to Lot Costing. But I will also want to know what will be the effects if I go from an average cost method to the Standard cost method.
    Thank you.

    Hello
    I am in R11 and implementing R11 , can someone help me with documentation?.
    I have defined the lost cost method and assigned it to the GL Cost Method in the Fiscal Policy, when i run the cost update process with the alternate method for lot costing ( Pmac) a warning error displays indicating the Cost Method in the Fiscal Policy is not the same as the one indicated on the actual cost process ( since i have ingredients based on the actual cost method ant not lot controlled i have to run this process previously)
    can someone help on this?, at this point im really confused
    In advanced many thanks for your help
    regards
    mariana
    [email protected]

  • Actual Cost Opening Balance Variation

    During deployment time rough opening balance amount given(Actual Cost)...now need to add the variation..if it is addition, v can use pre-approved expenditure(PAE) batches and pass the respective task value....but in case of negative values...how to go about it...
    Is it possible to pass negative amount via PAE batches??(violation occurred)
    i can find 1 reverse button on the main page of PAE..how can i utilize it?????...could any 1 help me with 1 e.g Plzzzzzzzzzzzzzzzzzz..
    Thanks a lot in advance...

    Hi
    Reviewing the Project Costing User Guide you can find the following:
    Reversing an Expenditure Batch_
    The Reverse button is enabled only if the current batch is released. In addition, an
    expenditure batch can be reversed only if the transaction source of the batch allows
    adjustments.
    When you reverse an expenditure batch, all the expenditure items are reversed except
    the following:
    • Related items
    • Expenditure items that have already been reversed
    • Reversing items (net zero adjusted items)
    • Expenditure items that were created as a result of a transfer adjustment
    To reverse an expenditure batch:
    1. Navigate to the Find Expenditure Batches window.
    2. Find the batch that you want to reverse.
    3. In the Expenditure Batches window, choose Reverse.
    4. In the Reverse an Expenditure Batch window, enter the name of the new reversing
    batch and choose OK .
    When the reversal is complete, Oracle Projects displays the number of items that
    were adjusted and the number of items that were rejected.
    end of text.
    Dina

  • Cost of Inventory Opening Balance

    Dear all,
    I understand from the accounting terms that COS = opening stock+purchases-closing stock.
    I need to input the cost of inventory (COS)as opening balance. What account should I debit/credit. I have inventory account, Inventory opening balance suspense account, and the GL opening Balance suspense account.
    Kind Regards,
    Asif

    Hi!
    When doing a Opening Balance for Stock via Initial Stock Window, System will automatically post a Debit Entry to Inventory Acc which based on the Set G/L Accounts By Inventory Acc you mention in ItemMaster and Credit the Inventory opening balance suspense account (you need to map this on Opening Balance Acc Field on the Screen)

  • Opening balance for FIFO method

    Dear all,
                   My inventory method is FIFO and I'm going to do invenotory opening balance. Please kindly suggest me step by step how to manage FIFO item because there is many lot of each item.
                   Moreover, about outstanding A/R and A/P. If I manage by FIFO. How to import outstanding A/R and A/P by DTW. Which template need for this operation.
    Thanks you very for your suggestion.
    Angnam

    Sorry, I post in wrong group. I will move this post to SBO Core instead.

  • MOH treated as COS actual costs are shown as WIP in RA method 14 (DIP)

    Hi,
    We have an issue with RA. We are using RA method 14 (Derive Cost of Sales from Resource-Related Billing of Dynamic Items).
    When the status of the Service Order is REL and when we execute the RA the actual costs booked are treated as WIP and the
    Material overheads are shown under Cost of Sales.
    Could you please let me know how to control the customisation on the MOH so that system can treat the MOH as WIP only when the status of the order is REL? Thanks for your help.
    Kind Regards
    Umapathi G

    Hi,
    Any help on this?
    Thanks for your time.
    Kind Regards
    Umapathi G

Maybe you are looking for